Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Origin:
UNI EN 10149–2
Supervisor: M. Revellino – G.P. & M. – T.S.C. – Advanced Materials App. – telefono (0039) 011.00.75787
Manager: G. Passalacqua – G.P. & M. – T.S.C. – A.M.A. – Materials – tel. (0039) 011.00.75792
1 PURPOSE
The present standard defines the chemical and mechanical characteristics of the weldable hot–
rolled plates in steel with high yield point bound to cold forming.
2 MATERIAL
Hot–rolled steels, with high yield point, with thickness from 1.5 to 20 mm, with minimal unit yield
strength equal to 355 N/mm2.
In case of dispute the only valid reference is the original italian edition.
3 FIELD OF APPLICATION
Material
The semi–finished indication must be completed with the symbol relative to the desired surface ap-
pearance according to IVECO STD. 18–1309.
The general supply conditions are provided by IVECO STD. 18–1309. 18–1309.
TMD
IN CASO
ANY DI STAMPA
HARD COPYLAINCOPIA
YOURÈPOSSESSION
DA RITENERSISHOULD
NON CONTROLLATA, PERTANTO,
BE CONSIDERED È NECESSARIO
NOT UP-TO-DATE. SEEVERIFICARE
RELEVANT L'AGGIORNAMENTO NELL'APPOSITO
WEB SITE FOR UP-TO-DATE SITO WEB
DOCUMENT
5 MATERIAL
Steel
C Mn Si P S A Nb V Ti
max. max. max. max. max. min. max. max. max.
S355MC 0.12 1.50 0.50 0.025 0.020 0.015 0.09 0.20 0.15
S420MC 0,12 1,60 0,50 0,025 0,015 0,015 0,09 0,20 0,15
The rolled sections must be free of defects which jeopardise the normal use. Their surface must
be technically clean, free of rust and extraneous material. Defects are not allowed which can
provoke breakings during use, or damages to equipments, or problems regarding welding or
paint and protective coating anchoring.
6 MECHANICAL CHARACTERISTICS
STANDARDS QUOTED
IVECO STD.: 15–0113, 15–0125, 18–1309.
UNI EN: 10149–2.