Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Signal 5.01 SW PACKAGE VER must be ACXR7201 (Loading package ZIP-file name), where
the X means multiple HW types and R RMIO motor control and I/O board. It can also be
identified in the DRIVE mode display by pressing the DRIVE button of the CDP312R.
VERSION INFO
Software Package Name: ACXR7201 (Code: 64669192 Rev. M)
RMIO Software: Application: ACAR7200 12.06.2006
Flux: ASFR7170 28.02.2006 (Flux and Inv. Parameter files
as in ASXR7290)
PANAP panel application: Name: Modlink
CXPM6020 01.12.2003
BASELIBRARY: Version: AXBR1020 03.05.2005
PURPOSE OF VERSION
In this new version of Crane sw liquid cooled, 690V invertertype LC0220_7 has been added.
COMPATIBILITY
RMIO boards: RMIO-01 for: ACS 800 R2 - R6 Single drives and ACS 800 Multidrive R2i -
R5i inverter sizes. ACS 800-11 R5 & R6 units.
RMIO-02 for: ACS 800 Multidrive types, 400 & 500V: R6i, R7i, R8i - 6*R8i.
690V: R6i, R7i, R8i - 12*R8i. ACS 800 single drive types R7, R8 and n*R8i.
800-17/37 R7i, R8i - 12*R8i.
Also used for all available ACN 634 and ACW 634 Multidrive inverters.
Possible to use with ACC 600 & ACC 611 frequency converter types.
COMPATIBILITY
PC Tools and Panels
Control Panel CDP Software ver. 5.20 or newer. Can be identified from the panel label CODE:
312R 64378660D.
Control Panel CDP Software ver. 4.25 or newer. Panel with the code 61085301 D includes
312 SW ver. 4.25. Limited functionality: Not compatible with adaptive
programming or start-up assistance functions.
Note! Application date is displayed in the format (y)y mm dd, if created in
years 2001 - 2009. Year information is displayed with only one digit.
DriveWindow 1.4x Version 1.41 is compatible with Windows NT, Windows 98 and Windows
95.
DriveWindow 2.x v. 2.0 with Windows NT
v. 2.02 - 2.1x is also compatible with Windows 2000 and Windows -XP
I/O Extension Modules
RTAC-01 All revisions are compatible.
Pulse Encoder Module
RDIO-01 All revisions are compatible.
Digital I/O Module
RAIO-01 All revisions are compatible.
Analogue I/O Module
NTAC-02 Version B serial no 717xxxx or newer.
Pulse encoder module
NDIO-02 All revisions are compatible.
Digital I/O Module
NAIO-03 All revisions are compatible.
Analogue I/O Module
NBIO-21 Not supported
Digital and Analogue
Module.
COMPATIBILITY
ABB Overriding Controllers
Controllers
APC2 Controller Compatible.
AC80 Compatible.
AC70 Compatible.
AC800M Compatible with Module bus. (Tested using Control Builder Professional 3.2).
Manuals
Firmware ACS 800 CraneDrive Control Firmware Manual, Crane Application Program
7.2
Code: 3BSE 011179 R1125
Effective: 20.06.2006
Software Downloading
Loading Package Windows 2000 *)
Windows XP *)
Windows NT **)
Windows 3.x **)
*) Driver software available from IHMM (Lotus Notes)
**) The loading package software can be downloaded either Windows 3.x or
Windows NT.
Sw package includes automatic PC set-up for PCMCIA and NISA-03.
NEW/IMPROVED FEATURES
1. Added new invertertype, liquid cooled R7i, 690V, 220 kVA: LC0220_7
(Copied from AMXR7230 invertertypefile)
BUG CORRECTIONS
KNOWN BUGS/FEATURES
Product AMXR7000
A = Inverter software based on ACS 600/ACS800 platform
D = DC drives software based on ACS 600/ACS800 platform
I = Input bridge software based on ACS 600/ACS800 platform
L = Large Drives software based on ACS 600/ACS800 platform
M = ACS1000 software
Software Product
C = ACC 600/800 Crane appl.
F = ACF 600
H = ACS 600/ACS800 PFC Macro
M = ACS 600/ACS800 System Application
N = ACS 600/ACS800 PMSM System Appl.
O = ACS 600/ACS800 OEM device
P = ACP 600 Motion Control Application
S = ACS 600/ACS800 Standard Application
T = ACS 600/ACS800 FCB Appl. Template
U = ACS 600 Water Cooling Unit Application
NAMC-board type
A = software for NAMC-03 or NAMC-04 Control Board
M = software for NAMC-03 or NAMC-04 Control Board
B = software for NAMC-2x Control Board
C = software for AMC 3 Control Board
D = reserved for N2AC AMC Board
E = software for NAMC-11 Control Board
G = software for NAMC-51 Control Board
R = RMIO Control Board for ACS 600 and
ACS800 hardware