Sei sulla pagina 1di 2

c 


        
 

List of Practical

@lectromechanical Systems Lab @L-221

Pre-Lab activity: Introduction to Electromechanical Lab, lab safety and first Aid Tips,
Commonly used symbols, Introduction to motor/generator and Transformer set.

1. 0eview of Transformer basics [visit to HLE transformer repair labs].


Single-ˇ Transformers
. To operate the 1-Ɏ transformer on off load, loaded and short circuit.
.1 To measure the losses and efficiency of a single-Ɏ transformer.
3. To examine transformation ratio of an Auto transformer using measuring techniques, to
measure current flow in various part of auto transformer and thus develop the relationship
between current flow.
ualf-wave rectifier circuits using Transformer set
. ingle-Ɏ transformer and half-wave rectifier circuits.
.1 ingle-Ɏ transformer and full-wave rectifier circuits.
. ingle-Ɏ transformer with Bridge-rectifier circuits.
Ñ-ˇ transformer and Ñ-ˇ (ѐ, Y) circuits
 . 3-Ɏ transformer in Y-¨ ¨- Y Y-Y and ¨-¨ configurations and to find line and phase
currents and voltages.
6. 3-Ɏ Mains supply, tar, Delta circuits¶ configurations.
7. 3- Ɏ Transformer basic circuits and configurations [TA0, DELTA].
8. 3- Ɏ Transformer star rectifier circuits.
Aorking with the AC/DC Motor/Generator Set
DC Generators
†. To study the properties of separately excited DC hunt generator under no load and full
conditions and to obtain saturation curve of the generator.
  To study the properties of self excited DC hunt generator under no load and full conditions.
 To study the properties of series DC generators.
13.1 DC compound Generators and its characteristic curves
u motors
 Load characteristic of DC series motor relation between speed and torque and to find out the
efficiency.
1.1 Performance of shunt motor using winburne Test.
 peed control of DC motor [1. eparately excited . hunt motors]
‘ Generators
1. To measure the per phase winding resistance of the AC Generator.
1.1 To examine method of controlling voltage and frequency from the A.C generator.
1 . To observe the voltage line to line, of AC generator at open Circuit.
1 .1 To plot the characteristics curve of the AC generator using hort circuit test.
16. To observe the effect of varied excitation (If) on the generator voltage at a constant speed.
16.1 To test the generator with resistive load (lamp load) and etc, to find out the voltage
regulation.
apacitor Start/run motors
17. To study the construction and working of the capacitor start and run motors.

Potrebbero piacerti anche