Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Applications Materials
Straight Edge
Inner Straight
Slot/Keyway
Flat Surface
Both Edges
Outer Edge
Cross-Hole
Back- Edge
Hole Edge
Aluminium
Hole Inner
Carbide &
Hardened
Cast Iron
Stainless
Comers
Plastics
Surface
Copper
Sheet
Glass
Brass
Steel
Steel
Steel
Blade Description Picture
Hole
B10 HSS. Deburrs materials with spiral chips. ★
Straight Edge
Inner Straight
Slot/Keyway
Flat Surface
Both Edges
Outer Edge
Cross-Hole
Back-Edge
Hole Edge
Aluminium
Hole Inner
Carbide &
Hardened
Cast Iron
Stainless
Comers
Plastics
Surface
Copper
Sheet
Glass
Brass
Steel
Steel
Steel
Blade Description Picture
Hole
1
E111 Thin-nosed, HSS. Deburrs holes with min. diameter
1.5 mm (0.06").
2
E120 E shaft, B20 cutting edge for materials with powdery
chips. Rotates clockwise & counterclockwise.
3
E200 HSS for materials with powdery chips. Rotates
clockwise & counterclockwise. ★
4
E200C Wear resistant carbide. E200 geometry.
5
E250 Specially designed for plastics. Very thin, heavy duty.
HSS for materials with spiral chips. Simultaneously
6
E300 deburrs the inside and outside of holes up to 6 mm ★
(0.24") thick.
7
E300P PVD TiN coated for high resistance to wear. E300
geometry.
HSS for materials with powdery chips. Simultaneously
8
E320 deburrs the inside and outside of holes up to 6 mm
(0.24") thick. Rotates clockwise & counterclockwise.
9 HSS for materials with powdery chips. Rotates
E350 clockwise & counterclockwise.
10
E500C Carbide tipped scriber.
11
E600 HSS. Removes burrs from back-edge of holes up to
★
20 mm (0.8") thick.
12
E601 Extra-long HSS. Removes burrs from back-edges of
holes up to 40 mm (1.6") thick.
HSS for materials with spiral chips. Excellent for
13
E700 deburring & scraping inside thick-walled holes and
cross-holes.
HSS for materials with powdery chips. Excellent for
14
E720 deburring & scraping inside thick-walled holes and
cross-holes. Rotates clockwise & counterclockwise.
15 HSS specially designed for deburring rubber & soft
E750 plastics without poking or sticking into workpiece.
17
E800 HSS for materials with spiral chips. Removes burrs
from corner-edges of shallow steps.
Long-lasting, cobalt-enriched for materials with spiral
18
E10 chips. Ideal for heavy duty jobs.
Countersink for hole-edges with up to 12 mm (0.47")
19
F12 diameter.
23
G10 HSS. Deburrs slots up to 15 mm (0.59") wide. ★
HSS, 4 cutting corners. For slots up to 10 mm (0.39")
24
G20 wide.
Carbide, 4 cutting corners. For slots up to 10 mm
25
G40C (0.39") wide.
HSS, 3 cutting corners. Cleans corners and removes
26
G30 radii after machining for smooth flush mating of
adjoining faces.
Solid carbide, 3 cutting corners. Cleans corners and
27
G30C removes radii after machining for smooth flush mating
of adjoining faces.
Double-edged, carbide. Deburrs surfaces up to
28
K10 50 mm (1.97”) wide.
HSS, 4 cutting edges. Deburrs external edges, OD A A A A B B A A
29
L10 20 mm (0.79") and up. ‘A’ side for materials with spiral
chips, ‘B’ side for powdery chips. B B
Double-sided, round HSS blade. 'A' side deburrs A A A B B A A
30
R10 materials with spiral chips, 'B' side deburrs materials
with powdery chips.
★
A B B
Double-edged, round HSS blade for massive deburring
31
R20 tasks on materials with spiral chips. ★
Produces arc-shaped finish on materials up to 16 mm
32
R30 (0.63") thick. Use a single R30 for one straight edge, or
two blades at once to deburr both edges simultaneously.
33
BUS1 Fine-finishing triangular scraper.
34
BUS2 Fine-finishing flat scraper.
35
BUS31 Fine-finishing round scraper.
36
BUS4 Fine-finishing hooked corner scraper.
★ Popular Blades Safety Note: Exercise caution when handling sharp blades ØB - 2.6 mm
ØE - 3.2 mm