Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
35 Bead String
A) B) B1) D)
PREPARATION
● Before beginning installation of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
● Estimated Assembly Time: 45 - 60 minutes
● Tools Required for Assembly (not included): Flathead screwdriver , Phillips screwdriver, pliers, electrical
tape, wire cutters, safety glasses &3, 60 Watt, Candelabra Base Bulbs.
● Helpful Tools (not included): Wire Strippers.
1 OF 5
INSTALLATION INSTRUCTIONS STYLE NUMBER : RAK8703IS
STEP 1:
a. Thread the end of the Center Stem onto the nipple on the Spray
top center of the Fixture Body . Please be sure the
Sprays on the side of the Center Stem and the Socket
Arms are lined up before tightening .
Center Stem
Socket Arm
Fixture
Scroll Arm Body
STEP 2:
a. Thread the Short Nipple into the top end of the Center
Stem Assembly . Locate the Wheel Part over the Short Fixture Loop
Nipple and secure with the Fixture Loop . Hand tighten
until snug .
Wheel Part
Short Nipple
Outlet Box
Outlet Box Screw
2 OF 5
INSTALLATION INSTRUCTIONS STYLE NUMBER : RAK8703IS
STEP 4 :
* Use Wire Connectors ( not supplied ) to connect the wires .
WHITE WIRE WHITE OR RIBBED
a . Connect the House Ground Wire to the Fixture Ground
Wire. FROM HOUSE FROM FIXTURE
b . Connect the House White Wire to the Fixture Supply Wire
BLACK ( OR RED ) WIRE BLACK OR SMOOTH
( White or Ribbed Side ) .
c . Connect the House Black ( or Red ) Wire to the Fixture FROM HOUSE FROM FIXTURE
Supply Wire ( Black or Smooth Side ).
d . Wrap each connection with approved electrical tape and GROUND WIRE GROUND WIRE
carefully stuff all of the connected wires into the Outlet Box . FROM HOUSE FROM FIXTURE
STEP 5 :
a . Place the Backplate over the Mounting Screws and secure
with Mounting Balls. Hand tighten until snug.
Backplate
Crossbar
Mounting Ball
Mounting Screw
STEP 6:
a. Place the Glass Disks and the Candle Covers over the
Sockets in turn .
Candle Cover
Glass Disk
Socket
Shade Holder
3 OF 5
INSTALLATION INSTRUCTIONS STYLE NUMBER : RAK8703IS
STEP 7:
Attach Bead Strings and Crystals .
a ) Attach Part D onto the hanger on the bottom of the Spray
Finial . Spring Clip
b ) Attach Parts B onto the hangers on the bottom of the
Socket . Bead String
c ) Attach Parts A onto the Hangers on the scroll arms of Bead String
with 35 Beads
the Fixture Assembly . with 33 Beads
d ) Attach Part B1 to rings on the bottom of Bead Strings .
e ) Connect spring clips on the top of the Bead String to
Sprays at the top of the Center Stem . Alternate 33 and
35 Bead Strings as shown in the TOP VIEW . Part B1 Center Stem
Crystal Hexagon
Drop without Bead
Socket
Scroll
Arm
Part A Finial
Crystal Pear
Part B - Crystal
Hexagon Drop
Fixture Body with Bead
Part D
Crystal Ball
Top View
Bead String
with 35 Beads Bead String
with 33 Beads
STEP 8:
a . Install correct Bulbs referring to fixture markings and / or labels for maximum wattage .
Your installation is completed now . Restore electricity . Retain this sheet for future reference .
4 OF 5
Photograph STYLE NUMBER : RAK8703IS
5 OF 5