Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
2006-2007
Programmes
Bachelor of Technology
5-year Dual Degree
5-year Integrated Master of Technology
Produced by Publication Cell for and behalf of IIT Delhi and Printed at Kaizen Offset Pvt. Ltd., Y-47 Okhla
Industrial Area,Phase-II, New Delhi-20, Phones : 26384113 & 26384114.
CONTENTS
1. Introduction ........................................................................................................................................ 1
1.1 Programmes ........................................................................................................................................... 1
1.2 Accreditation ............................................................................................................................................ 1
1.3 Programme Structure ............................................................................................................................. 1
1.4 Course Numbering Scheme .................................................................................................................. 2
1.4.1 Department/Centre Codes ........................................................................................................ 2
1.4.2 Codes for the nature of the course ........................................................................................... 3
1.4.3 Level of the Course .................................................................................................................... 3
1.4.4 Numbering Scheme for Courses of Special Nature ............................................................... 3
1.5 Course Content Description .................................................................................................................. 3
1.6 Entry Number of Students ...................................................................................................................... 4
1.7 List of Programme Codes ...................................................................................................................... 4
1.1 Programmes
The information given in this bulletin is for the following programmes:
1.2 Accreditation
The Institute is accredited by the following professional institutions in India and abroad for the purpose of exemption
from their examinations: 1.Institution of Engineers (India), 2. Ministry of Transport and Shipping, Government of India,
Directorate General of Shipping, Bombay; 3. Institution of Electronics and Telecommunication Engineers (India); 4.
Institution of Electrical Engineers, London; 5. Textile Institute, U.K.
The degrees are also accredited by the Association of Indian Universities and the Association of Commonwealth
Universities.
1.3 Programme Structure
I.I.T, Delhi follows credit system in its academic programmes. Each course is associated with a fixed credit. All
programmes are defined by its total credit requirement and a pattern of credit distribution over courses of different
categories. Total credit requirement for different programmes are as follows:
(i) B.Tech. : 180 credits
(ii) Dual Degree and Integrated M.Tech. : 216-218 credits.
(a) B.Tech. programmes
For B.Tech. programmes and undergraduate part of the dual degree programmes, the total credits are distributed over
two categories: undergraduate core (UC) and undergraduate elective (UE).
1
The Undergraduate core (UC) has following components:
(i) Basic Sciences (BS) which include Mathematics, Physics and Chemistry courses.
(ii) Engineering Arts and Sciences (EAS) which include fundamental engineering courses.
(iii) Departmental Core (DC) which include courses of relevant discipline.
Undergraduate electives (UE) courses belong to basically three categories:
(i) Departmental Electives (DE): Electives related to the parent discipline.
(ii) Humanities and Social Sciences, and Management (HM): Electives to provide a wide exposure to
different areas of Humanities, Social Sciences and Management.
(iii) Open Category (OC): Electives to provide an opportunity to the student to develop broad inter-disciplinary
knowledge base or to specialize significantly in an area outside the parent discipline.
(b) Dual degree programmes
In case of Dual degree programmes, credits of the M.Tech. part are divided into two categories:
(i) Programme Core (PC): Core courses related to the M.Tech. specialization.
(ii) Programme Electives (PE): Elective courses related to the M.Tech. specialization.
(c) Integrated M.Tech. programme
Total credit for the integrated M.Tech. programme is divided into two categories:
(i) Integrated Core (IC)
(ii) Integrated Electives (IE)
Integrated Core and Integrated Electives have components similar to those of the undergraduate core and undergraduate
electives, respectively.
Details of the credit system and requirements of each programme are provided in Section 2.
1.4 Course Numbering Scheme
Course numbers are denoted by six alpha-numerals:
EE L 3 24
Department/ Nature Level of the course Last two digits provide unique
Centre of the as determined by identification code for the course
offering course Pre-requisite or
the course number of earned
credits
2
1.4.2 Codes for the nature of the course
The nature of the course corresponding to the third alphabet in the course code is as follows:
L Lecture Courses
(other than lecture hours, these courses can have Tutorial and Practical
hours, e.g. L-T-P structures 3-0-0, 3-1-2-, 3-0-2, 2-0-0, etc.)
P Laboratory based Courses
(where performance is evaluated primarily on the basis of practical or laboratory work with
LTP structures like 0-0-3, 0-0-4, 1-0-3, 0-1-3, etc.)
D Project based courses leading to dissertation (e.g. Major, Minor, Mini Projects)
T Training
C Colloquium
R Professional Practice
N Introduction to the Programme or to Humanities and Social Sciences, etc.
S Independent Study
V Special Topics Lecture Courses (1 or 2 credits)
100 – 400 level courses : Core and Electives for B.Tech. programmes
700 & 800 level courses : Core and Electives for M.Tech programmes
3
HUL215 Econometric Methods
4 credits (3-1-0)
Pre-requisites: HUN100
Definition, scope and methodology of econometric research. Estimation and testing of hypotheses.
Simple linear regression. OLS and its properties. Gauss-Markov theorem. Statistical tests of
significance. Multiple regressions. Statistical tests. Heteroskedasticity. Autocorrelation. Multicollinearity.
Distributed lagged models. Pooling of time series and cross-section data. Simultaneous equation
systems. Identification problem. Estimation methods. ILS, 2SLS. Qualitative and limited de pendent
variables. Maximum likelihood methods. Forecasting.
A student will be eligible to register for a course provided he/she satisfies pre-requisites for the course. A student can
register for at most one course in a set of overlapping/equivalent courses. Departments may use these overlapping/
equivalent courses for meeting degree/pre-requisite requirements in special circumstances.
4
2. CREDIT SYSTEM
2.1 Credits Assignment
Each course, except a few special courses, has a certain number of credits assigned to it depending upon its
lecture, tutorial and laboratory contact hours in a week.
Lectures/Tutorials: One lecture/tutorial hour per week per semester is assigned one credit.
Practical : One laboratory hour per week per semester is assigned half credit.
A few courses are without credit and are referred to as noncredit (NC) courses.
2.3 Pre-requisites
Each course, other than 100 level courses, has another course or a fixed number of credits or both, specified as it’s
pre-requisite. A student who has not obtained a pass grade, viz., A, A(-), B, B(-), C, C(-), D, NP, in the pre-requisite
or has not earned requisite number of credits will not be eligible to do that course. Examples:
A student who has obtained a pass grade in any one of the courses AML140, AML150, AML160, AML170,
AML180, CHL231, or CHL204, and has earned 60 credits will be eligible to register for this course.
BEL702 Bioprocess Plant Design
Pre-requisite: AML110 & MEL110 & CHL205 & CHL204 & BEL401 and 90 E.C.
A student who has obtained a pass grade in all these courses AML110, MEL110, CHL205, CHL204, and
BEL401, and has earned 90 credits will be eligible to register for this course.
A student who has earned a pass grade in EEL301 will not be eligible to register for and earn credits, under any
category, for either MEL312 or CHL261.
2.5 Course Coordinator
A member of the faculty called the course coordinator, coordinates each course. He/she has the full responsibility for
coordinating the course, coordinating the work of other members of the faculty involved in that course, holding the
5
tests and awarding the grades. In case of any difficulty with a course, the student is expected to approach the
respective course coordinator for advice and clarification.
6
X Grade
The ‘X’ grade is awarded for incomplete work in Independent Study, Mini Project, Minor Project, Major Project – Part
1 and Part 2 (B.Tech, M.Tech.-dual degree, integrated M.Tech.) based on the application of the student. On completion
of the work, X grade can be converted to a regular grade within the first week of the next semester. Otherwise, the
student will be awarded ‘X’ grade on a permanent basis and it will appear in his/her grade card. Further, the student
will be required to register for the course in the next semester. The credits of the course will be counted towards his
total load for the semester. In case of Major Project Part 1, the student will not be permitted to register for Major
Project Part 2 simultaneously as Major Part 1 is a pre-requisite for Major Project Part 2. A student can be awarded
‘X’ grade only once in a course.
S and Z Grades
The ‘S’ grade denotes satisfactory performance and completion of a course. The ‘Z’ grade is awarded for non-
completion of the course requirements, and the student will have to register for the course until he/she obtains the ‘S’
grade. The specific courses in which S/Z grades are awarded for 2003 and post-2003 entry students are:
(i) Introduction to the Programme
(ii) Practical Training
(iii) NCC/NSO/NSS
(iv) Introduction to Humanities and Social Sciences
(v) Professional Practices.
The CGPA is calculated on the basis of all pass grades, except audit courses and courses in which S/Z grade is
awarded, obtained in all completed semesters.
I Semester
Course Course Grade Earned Grade Points
No. Credits Awarded Credits Points Secured
(1) (2) (3) (4) (5) (6)
MALXXX 5 C 5 6 30
CSLXXX 4 C(-) 4 5 20
PHPXXX 4 A 4 10 40
PHLXXX 1.5 B 1.5 8 12
MELXXX 4 E 0 2 08
AMLXXX 4 B(-) 4 7 28
Credits registered in the semester (total of column 2) = 22.5
Earned Credits in the semester (total of column 4 = total of column 2 excluding E and F grades) = 22.5 - 4 = 18.5
Points secured in this semester (total of column 6) = 138
7
II Semester
Course Course Grade Earned Grade Points
No. Credits Awarded Credits Points Secured
(1) (2) (3) (4) (5) (6)
MALXXX 5 D 5 4 20
EELXXX 5 F 0 0 00
CYLXXX 4 B(-) 4 7 28
CYPXXX 1.5 C 1.5 6 09
MELXXX 4 A(-) 4 9 36
AMLXXX 5 W 0 N.A. 00
HULXXX 2 NP 2 N.A. 00
Credits registered in the semester (total of column 2 excluding W grades courses) = 21.5
Earned Credits in the semester (total of column 4 = total of column 2 excluding E and F grades) = 16.5
Cumulative Earned Credits (earned credits in previous semesters and current semester) = 35.0
Points Secured in this semester (total of column 6) = 93
Cumulative points secured (total of points secured in previous semesters and current semester) = 223
8
the CGPA. In case CGPA of 6.0 or more is achieved for the M. Tech. part, the student will be eligible for
award of the dual degrees (B. Tech. & M. Tech.). However, in case the same is not achieved at the end of
stipulated period, the student will be eligible for the award of only B. Tech. degree, provided a written request
for the same is made to the Dean UGS.
(iii) with B. Tech. CGPA less than 4.5 and M. Tech. CGPA less than 6.0
The student will be permitted to do additional elective courses (under any category) to improve the CGPA for
completion of B. Tech./M. Tech. degrees (PE category only) within the maximum time limit of 7 years. (If no
programme elective courses are available, relevant 700 and 800 level courses as certified by the department
can be done for the purpose of improving the CGPA of the M.Tech. part). In case a CGPA of 4.5 or more for
B. Tech. and 6.0 or more for M. Tech. is achieved, the student will be eligible for award of the Dual Degrees
(B. Tech. & M. Tech.). However, in case a CGPA 4.5 or more for B. Tech. is achieved but the CGPA 6.0 or
more for M. Tech. is not achieved at the end of stipulated period, the student will be eligible for award of only
B. Tech. degree provided a written request for the same is made to the Dean UGS.
(c) No self-study course will be permitted for the purpose of improvement of CGPA for M. Tech. or B. Tech. part.
2.8.4 NCC/NSS/NSO
All students are required to enroll for either one of NCC, NSS or NSO in their first year. This requirement should be
completed in one year. If, however, a student is not able to complete this requirement in the first year, he/she must
complete it by the end of the 2nd year (4th semester). See also 3.11 (a).
Maximum of 6 credits under open category can be taken from the departmental U.G. or P.G. courses, and other
programme-relevant courses as identified by the department.
Exact requirements for each programme are detailed in Section 4.
9
2.9 Audit Courses
Audit facility is open to all students who have completed 100 earned credits. A student will be permitted to do any
number of audit courses over and above the graduation requirements. The audit rules are:
(a) 4-year Programme: A maximum of 8 credits from the elective courses in any category out of 180 credits
required for B.Tech. degree may be completed on audit basis.
(b) Dual-degree Programme: A maximum of 8 credits from the elective courses in any category may be completed
on audit basis from the UG part of the programme.
(c) Integrated M.Tech. Programme: A maximum of 8 credits from the elective courses in any category may be
completed on audit basis.
In absentia registration or registration after the specified date will be allowed only in rare cases at the discretion of
Dean, UGS. In case of illness or absence during registration, the student should intimate the same to his/her course
adviser and Dean, UGS. A student must meet his/her advisor within the first week of the new semester for confirmation
of his/her registration. A students registration record will be available on-line for reference.
Under exceptional circumstances a student can register for a maximum of 28 credits including not more than 6 (six)
‘L’ (Lecture) courses. However, this will be permitted at most twice during the programme in semesters other than 1st
and 2nd and those in which the student is registered for Major Project Part 1 or 2.
These conditions will not be applicable for those students whose load is restricted by the criteria defined in
section 3.8.
(a) A student, who was not in the campus during the period of registration in the previous semester, needs to
complete the registration process on or before the first day of the semester before commencement of classes; or
10
(b) For reasons beyond his/her control, if a student is not able to register or send an authorized representative
with a medical certificate, he/she may apply to the Dean (UGS) for late registration. Dean (UGS) will consider
and may approve late registration in genuine cases on payment of an extra fee of Rs. 250/-. Late registration
is permitted until one week after the start of the semester.
(a) Add/Drop: A student has the option to add or drop courses for which he/she has registered. This facility is
restricted to the first week of the semester.
(b) Audit: A student may apply for changing a credit course to an audit one within one week of the end of the first
minor test.
(c) Withdrawal: A student who wants to withdraw from a course should apply within one week of the end of first
minor test. A withdrawal grade (W) will be awarded in such cases.
Appropriate web-based applications are to be used at the academic web site from I.I.T.Delhi intranet for availing the
above options.
However, to account for late registration, sickness or other such contingencies, the attendance requirement will
be a minimum of 75 % of the classes actually held.
A student with less than 75 % attendance in a course during the semester, in lectures, tutorials and practicals taken
together (as applicable), will be awarded an ‘F’ grade in that course irrespective of his/her performance in the tests.
The course coordinator will award ‘F’ grade to the student who is deficient in attendance taking into
account the consolidated attendance record for the whole semester.
For the purpose of attendance calculation, every scheduled practical class will count as one unit irrespective of the
number of contact hours.
Attendance record will be maintained based upon roll calls (or any equivalent operation) in every scheduled lecture,
tutorial and practical class. The course coordinator will maintain and consolidate attendance record for the course
(lectures, tutorials and practicals together, as applicable).
(b) A student who is absent due to illness or any other emergency, up to a maximum of two weeks, should
approach the course coordinator for make-up quizzes, assignments and laboratory work.
(c) A student who has been absent from a minor test due to illness should approach the course coordinator for
a make-up test immediately on return to class. The request should be supported with a medical certificate
from institute’s medical officer. A certificate from a registered medical practitioner will also be acceptable for
a student normally residing off-campus provided registration number of the medical practitioner appears
explicitly on the certificate.
(d) In case a student cannot appear in a minor test on the same day in which he/she has appeared in a test, a
medical certificate only from the institute’s medical officer will be acceptable.
(e) In case of absence on medical grounds or other special circumstances, before or during the major examination
period, the student can apply for I-grade. 75% attendance in a course is necessary for being eligible for
request of I-grade in that course. An application requesting I-grade should be made at the earliest but not
later than the last day of major tests. The application should be made to the Head of the Department of the
student’s programme who will grant approval depending on the merit of the case and inform course coordinators
and U.G section. The student should complete all course requirements within ten days of the last date of
Major Tests. The I-grade will then be converted to a proper grade ( A to F, NP or NF).
11
(f) In special situations arising due to the student’s inability to be present at the institute during the stipulated
period, in (e) above, the period for conversion of I grade can be extended to the first week of the next
semester. Approval for this extension can be granted by Dean, UGS on recommendations of the concerned
Head of the department, course coordinators and concerned warden. A request to this effect must be included
in the application for I-grade.
(g) In case the period of absence on medical grounds is more than 20 working days during the semester, a
student may apply for withdrawal from the semester, i.e. withdrawal from all courses registered that semester.
Such application must be made as early as possible and latest before the start of the major tests. No
applications for semester withdrawal will be considered after the major tests have commenced. Dean (UGS),
depending on the merit of the case, will approve such applications. Partial withdrawal from courses registered
in a semester is not allowed.
(h) If a student is continuously absent from the institute for more than four weeks without notifying the Dean,
UGS, his/her name will be removed from institute rolls.
(a) If Cumulative Earned Credits falls below 16 times the number of regular semesters spent by the student
at IIT Delhi; or
(b) If CGPA (B.Tech. CGPA for dual-degree students) falls to 4.75 or less and SGPA is less than 6.
A student thus identified will not be permitted to register for more than 20 credits in a semester. In rare cases, Dean,
UGS can permit relaxation of this limit.
(a) SGPA of a student falling 2 points below that of the previous semester; or
(b) M. Tech. CGPA for dual degree students falling below 6.25; or
(c) Students whose load has been restricted.
1st year students: A student in general category must complete at least 20 credits at the end of the 2nd semester of
his/her stay in the Institute, failing which his/her registration would be terminated and no appeal would be allowed. A
student in SC/ST/PH category must complete at least 16 credits at the end of the 2nd semester of his/her stay in the
Institute failing which his/her registration would be terminated and no appeal would be allowed.
2nd year students: A student in general category must complete at least 50 credits at the end of 4th semester of his/
her stay in the Institute, failing which his/her registration would be terminated and no appeal would be allowed. A
student in SC/ST/PH category must complete at least 46 credits at the end of 4th semester of his/her stay in the
Institute failing which his/her registration would be terminated and no appeal would be allowed.
3rd year onwards: A student’s registration may be terminated at the end of 3rd year, 4th year or 5th year if he/she fails
to earn at least 84, 120 or 156 credits, respectively. The student may appeal against termination within the first week
of the next semester.
In case a student has withdrawn for one or more semesters, the earned credit requirements would be reduced by 10
credits for each semester of withdrawal in the 1st year, and by 16 credits for each semester of withdrawal in the 2nd
12
year onwards. However, if at any stage, the number of credits required is more than 26*N where N is the number of
semesters left, the registration would be terminated without giving any opportunity to appeal.
A summary of the above criterion is presented in the following table:
NOTE: Ý implies that credits are checked after the summer semester of that year.
13
1 credit course that is normally done in first year. In case, a student is not able to complete it in the first year, he/she
must do so by the end of the second year, otherwise he/she will not be allowed to register in the 3rd year, as is the
case for NCC/NSS/NSO courses.
(d) Independent Study
‘Independent Study’ is an elective course that some departments may offer from fourth semester onwards. It is a
3-credit course covering:
An individual student and teacher should decide upon the topic and submit an initial write-up to get the approval of the
Course Coordinator before the end of the semester when the course is registered for (i.e. in the semester prior to
doing the course). The duration of the course will be the entire semester. A written report should be submitted by the
student on completion of the course. The student’s performance will be evaluated by a departmental committee via
a mid-term and final evaluation. A student has to earn 80 credits and obtain at least 7.5 CGPA to become eligible to
do Independent Study.
It is the joint responsibility of the departments and the T&P unit to arrange for training for all their students. In the
beginning of each academic session, T&P unit will prepare programme wise lists of potential training organizations in
consultation with the respective departments. These organizations will be approached by the T&P unit with a request
to provide training seats. Consolidated lists of training offers will be made available to the students through depart-
ments in the beginning of second semester of the session. If a student is interested in making his/her own arrange-
ment for the training seat, he/she will need to have the training organization approved and route the application through
the departmental training incharge and T&P unit. All such applications must be completed before the end of first
semester.
The department will appoint a training supervisor for each student. The supervisor is expected to keep contact with the
assigned students through e-mail and /or telephone. The students will be required to get their training plan reviewed by
their supervisor within the first week and report their progress on weekly basis. Supervisor, if desires, may visit the
organization. Visits within the country will be supported by the institute.
A student will be registered for practical training course in the summer semester in which the training is being done.
The Department will scrutinize the training report and the training certificate and will award ‘S’ grade within the next
semester, if the training is satisfactory. In case the training is considered to be unsatisfactory, a ‘Z’ grade will be
awarded and the student may have to undergo fresh practical training for a part or full duration. Practical Training and
submission of summer training report is a mandatory requirement for graduation.
(g) Colloquium
Colloquium is a 3-credit course and includes assessment of practical training. A student will be eligible to do
Colloquium if he/she had registered for Practical Training earlier. Typically, a student will register for Colloquium in the
regular semester following the summer semester in which he/she has done the practical training.
14
of classes of the 6th semester (for 4 year programmes) and 8th semester (for dual-degree and integrated M.Tech.
programmes). Part 2 is normally expected to be a continuation of Part 1, except under those exceptional circumstances
in which the supervisor (guide) is changed at the end of Part 1. A mid-term assessment and an end semester
assessment will be carried out for each part. Part 1 and Part 2 will be graded separately. C grade is considered as
the minimum pass grade in each part of the M.Tech. Major Project in Dual Degree and Integrated M.Tech.
programmes.
A student must have obtained a pass grade in Project Part 1 in order to be eligible for registering for Project Part 2.
Major project for the dual degree and Integrated M. Tech. programmes will be spanned over one summer semester
and two regular semesters. Typically a student will register for the Part 1 of major project (xxD8y1 - 6 credits) in the
summer semester following eighth semester. He/she will be automatically awarded an X-grade in the summer semester
unless he/she is awarded an F grade. If a student is awarded X grade, he/she will be automatically registered for
M.Tech. Project Part 1 (xxD8y1) in the following regular semester. Mid-term evaluation of the M.Tech. Project Part 1
will be held within first two weeks of the corresponding semester. At the end of the regular semester, the student will
be awarded a proper grade in M.Tech. Project Part 1 (xxD8y1). If he/she obtains a valid pass grade in this course, he/
she can register for M.Tech. Project Part 2 (xxD8y2-14 credits) in the following regular semester. His/her M.Tech.
Project Part 2 will be evaluated at the end of the corresponding semester as per the stipulated deadline (normally
before 31st May).
In case a student does not obtain an X-grade in M.Tech. Project Part 1 in the summer semester, he/she will require
permission from the Head of the Department to register for M.Tech. Project Part 1 in a regular semester. In this
situation, he/she will register for M.Tech. Project Part 1 with reduced credits, viz. 4 credits (xxD8y3). After completing
this course with a valid pass grade he/she will be required to register for M.Tech. Project Part 2 with 16 credits
(xxD8y4). In this case the project will either start in the regular semester and extend into the following summer
semester or start in the summer semester and extend into the following regular semester. M.Tech. Project Part 2 will
be evaluated taking into account the work done in both the semesters. Extension from one semester to the other will
be permitted automatically by awarding X-grade to the student. An F grade instead of X will bar a student from
continuing the M.Tech. Project Part 2 in the following semester. The student will need to do fresh registration for
M.Tech. Project Part 2.
(xxD8ym – is the course number for M.Tech. Major Project as explained in section 1.4.4)
(a) A student may be given a self-study course of weightage not exceeding 5 credits in the final semester if he/
she is short by a maximum of 5 earned credits required for graduation provided that the course is not running
15
in that semester as a regular course. Students in the Dual-degree and Integrated M.Tech. programmes are
allowed to avail of this provision during their last semester. However, they would be permitted to take only a
UG course as a possible self-study course. A student can make use of this provision only once during the
programme.
(b) A student may also be permitted to do a U.G. (UC/IC) core course not exceeding 5 credits in self-study
mode at most once during the program, provided he/she has failed in it earlier and the course is not being
offered as a regular course during that semester.
(c) Students should apply for a self-study course with appropriate recommendation of the Course Coordinator
and the Head of the Department of the student’s programme. The final sanction of a self-study course to a
student is made by the Dean, UGS.
(d) Grant of a course to be taken as a self-study course cannot be claimed by any student as a matter of right.
(e) Normally, no formal lectures will be held for a self-study course but laboratory, design and computation
exercises will be conducted if they form an integral part of the course.
(f) The Course Coordinator will hold minor and major tests besides other tests/quizzes for giving his/her
assessment at the end of the semester. In summer semester, there will be at least one mid semester test
and a major test.
(g) The self-study course will run during the total duration of the semester (including summer semester).
(h) The grades after due moderation by the Moderation Committee will be sent by the Department to Officer In-
charge (UGS) at the end of the semester along with grades of all other courses.
A student receiving assistantship will be eligible for total of 30 days leave during the 14-month period. He/she will not
be entitled to mid-semester breaks, winter and summer vacations.
(a) A student is eligible to apply for change of discipline at the end of first year only, provided he/she satisfies the
following criteria:-
16
(b) Change of the discipline will be permitted strictly in the order of merit as determined by their CGPA at the end
of first year subject to the limitation that the actual number of students in the third semester in the discipline
to which the transfer is to be made, should not exceed the sanctioned strength and the strength of the
discipline from which transfer is being sought does not fall below 90% of existing strength.
(c) For a student with CGPA 9.0 or more, even if a vacancy does not exist, he/she will be permitted to change
provided the strength in the discipline to which the change is being sought does not exceed by 5% of the
approved strength.
(d) A student with CGPA 9.0 or more will be permitted to change discipline even if strength of discipline from
which change is being sought falls below 90% of the existing strength.
(e) Stipulation of minimum credits and CGPA requirements will not be insisted upon for change of discipline to
a branch in which a vacancy exists and the concerned student was eligible for admission to that discipline
at the time of entry to IIT Delhi. However, requirements of credits and CGPA will continue to apply in case of
both general and SC/ST category students seeking change to a discipline to which the concerned student
was not eligible for admission at the time of entry to IIT Delhi.
17
18
4. PROGRAMME STRUCTURES
19
Programme Code: CH1 / (CH)
Bachelor of Technology in Chemical Engineering
Department of Chemical Engineering
20
21
Programme Code: CE1 / (CE)
Bachelor of Technology in Civil Engineering
Department of Civil Engineering
22
23
Programme Code: CS1 / (CS)
Bachelor of Technology in Computer Science and Engineering
Department of Computer Science and Engineering
24
25
Programme Code: EE1 / (EE)
Bachelor of Technology in Electrical Engineering
Department of Electrical Engineering
EEL330 Selected Topics in Communication 3-0-0 3
The overall credits structure Engineering - I
Undergraduate Core (UC) Undergraduate Elective (UE) EEL331 Electromagnetics and Advanced 3-0-0 3
Electromechanics
Category Credits Category Credits EEL338 Antennas and Propagation 3-0-0 3
DC 69 DE 21 EEL340 Selected Topics in Power and Machines 3-0-0 3
EEL342 DSP based Control of Electric Drive 3-0-0 3
BS 20 HM 14 EEL346 Electrical Machines and Industrial Drives 3-0-0 3
EAS 21 OC 34 EEL358 Operating Systems 3-0-0 3
EEL360 Selected Topics in Control Engineering - I 3-0-0 3
HU 1 EEL365 Intelligent Control 3-0-0 3
TOTAL 111 TOTAL 69 EEL370 Selected Topics in Computers - I 3-0-0 3
EEL375 Embedded Systems 3-0-4 5
Total credits = 180 EEL380 Selected Topics in Electronics - I 3-0-0 3
EEL390 Selected Topics in Information and 3-0-0 3
Basic Sciences (BS) Core
Communication Technology – I
CYP100 Chemistry Laboratory 0-0-4 2 EEL404 Flexible AC Transmission System 3-0-0 3
MAL111 Introduction to Analysis and Differential 3-1-0 4 EEL420 Selected Topics in Electronics - II 3-0-0 3
Equations EEL422 Computers in Biomedicine 3-0-0 3
MAL124 Introduction to Algebra and Matrix Analysis 3-1-0 4 EEL430 Selected Topics in Communication 3-0-0 3
MAL250 Introduction to Probability Theory and 3-1-0 4 Engineering - II
Stochastic Processes EEL432 Satellite Communication 3-0-0 3
PHL110 Fields and Waves 3-1-0 4 EEL433 Communication Engineering - II 3-0-0 3
PHP100 Physics Laboratory 0-0-4 2 EEL435 Optical Communication 3-0-0 3
TOTAL BS Core 12-4-8 20 EEL441 Industrial Electronics 3-0-2 4
Engineering Arts and Sciences (EAS) Core EEL451 Power Systems Protection 3-0-0 3
EEL452 HVDC Transmission 3-0-0 3
AML110 Engineering Mechanics 3-0-2 4
EEL453 Power System Dynamics and Control 3-0-0 3
CSL101 Introduction to Computers and Programming 3-0-2 4
EEL455 Power System Planning 3-0-0 3
OR
EEL456 Power Engineering - II 3-0-2 4
CSL102 Introduction to Computer Science 3-0-2 4
EEL460 Selected Topics in Control Engineering - II 3-0-0 3
CSL201 Data Structures 3-0-4 5
EEL462 Identification and Adaptive Control 3-0-0 3
EEL101 Fundamentals of Electrical Engineering 3-0-2 4
EEL470 Selected Topics in Computers - II 3-0-0 3
MEL120 Manufacturing Practices 2-0-4 4
EEL472 Parallel and Distributed Processing 3-0-0 3
TOTAL EAS Core 14-0-14 21
EEL473 Computer Communication 3-0-0 3
Humanities and Social Sciences (HU) Core EEL482 Mechatronics 3-0-0 3
HUN100 Introduction to Humanities and Social Sciences 1-0-0 1 EEL704 Robotics and Automation 3-0-0 3
EEL706 Soft Computing 3-0-0 3
Departmental Core (DC)
EEL710 Coding Theory 3-0-0 3
EEC410 Colloquium (EE) 0-3-0 3 EEL713 Microwave Theory and Circuits 3-0-0 3
EED411 Major Project Part 1 (EE) 0-0-6 3 EEL715 Image Processing 3-0-2 4
EED412 Major Project Part 2 (EE) 0-0-14 7 EEL716 Telecommunication Switching and 3-0-0 3
EEL201 Digital Electronic Circuits 3-1-0 4 Transmission
EEL202 Circuit Theory 3-1-0 4 EEL749 Special Electromechanical Systems 3-0-0 3
EEL203 Electromechanics 3-1-0 4 EEL754 Computer Graphics 3-0-2 4
EEL204 Analog Electronics Circuits 3-1-0 4 EEL758 Intelligent and Knowledge Based Systems 3-0-0 3
EEL205 Signals and Systems 3-1-0 4 EEL772 Optimal Control Theory 3-0-0 3
EEL207 Engineering Electromagnetics 3-1-0 4 EEL781 Neural Networks 3-0-0 3
EEL301 Control Engineering - I 3-1-0 4 EEL790 Selected Topics in Information and 3-0-0 3
EEL303 Power Engineering - I 3-1-0 4 Communication Technology - II
EEL306 Communication Engineering 3-1-0 4 EEP321 Measurements and Instrumentation Laboratory 0-0-3 1.5
EEL308 Computer Architecture 3-1-0 4 EEP443 FEM Analysis of Machines Laboratory 0-0-3 1.5
EEN110 Introduction to Electrical Engineering 0-0-4 2 EEP446 Electrical Machines and Industrial Drives 0-0-3 1.5
EEP201 Electronics Laboratory - I 0-0-3 1.5 Laboratory
EEP203 Electromechanics Laboratory 0-0-3 1.5 EEP467 Computer Control Laboratory 0-0-3 1.5
EEP204 Electronics Laboratory - II 0-0-3 1.5 EEP719 Communication Engineering Laboratory - II 0-0-3 1.5
EEP211 Design (EE) 0-0-4 2 EES310 Independent Study (EE) 0-3-0 3
EEP301 Control Engineering Laboratory 0-0-3 1.5 EEV401 Special Module in Communication Engineering 1-0-0 1
EEP303 Power Engineering Laboratory 0-0-3 1.5 EEV402 Special Module in Power Systems, Machines 1-0-0 1
EEP306 Communication Engineering Laboratory 0-0-3 1.5 and Power Electronics
EEP307 Electromagnetics Laboratory 0-0-3 1.5 EEV404 Special Module in Control Engineering 1-0-0 1
EEP308 Computer Technology Laboratory 0-0-3 1.5 EEV405 Special Module in Electronics 1-0-0 1
EET410 Practical Training (EE) — NC EEV704 Special Module in Computers 1-0-0 1
TOTAL DC 30-13-52 69 MAL341 File Structures and Information Systems 3-0-2 4
Departmental Electives (DE) Design
MAL342 Analysis and Design of Algorithms 3-1-0 4
EED310 Mini Project (EE) 0-0-6 3 MAL373 Wavelets and Applications 3-1-0 4
EEL212 Measurements and Instrumentation 3-0-0 3 MAL382 Theory of Automata 3-1-0 4
EEL218 Physical Electronics 3-0-0 3 MAL710 Database Management Systems 3-0-2 4
EEL311 Graph Theory and its Application to 3-0-0 3 MAL717 Fuzzy Sets and Applications 3-1-0 4
Electrical Engineering MAL745 Software Engineering 3-0-2 4
EEL314 Medical Electronics 3-0-0 3 MAL786 Cryptology 3-1-0 4
EEL315 Analog Integrated Circuits 3-0-0 3
EEL316 Digital Communications 3-0-2 4 Elective Streams (DE-A,-B,-C) Course Advise
EEL319 Digital Signal Processing 3-0-2 4 Information & Commnication Technology EEL358 EEL316 EEL319
EEL322 Integrated Circuits Technology 3-0-0 3 Integrated Electronics and Circuits EEL219 EEL329 EEL319
EEL324 Digital Hardware Design 3-0-0 3 Control and Automation Engineering EEL325 EEL704 EEL375
EEL325 Control Engineering - II 3-0-0 3 Power, Machines and Power Electronics EEL331 EEL441 EEL456
EEL326 Micromotors and their Applications 3-0-0 3
EEL327 Fault Diagnosis of Digital Circuits 3-0-0 3 The student has to opt for one elective stream and must take all
EEL329 VLSI Technology and Design 3-0-2 4 courses of that stream.
26
27
Programme Code: EE2 / (EP)
Bachelor of Technology in Electrical Engineering (Power)
Department of Electrical Engineering
28
29
Programme Code: PH1 / (PH)
Bachelor of Technology in Engineering Physics
Department of Physics
30
31
Programme Code: ME1 / (ME)
Bachelor of Technology in Mechanical Engineering
Department of Mechanical Engineering
32
33
Programme Code: ME2 / (PE)
Bachelor of Technology in Production and Industrial Engineering
Department of Mechanical Engineering
34
35
Programme Code: TT1 / (TT)
Bachelor of Technology in Textile Technology
Department of Textile Technology
36
37
Programme Code: BB5 / (BB)
Bachelor of Technology in Biochemical Engineering and Biotechnology, and
Master of Technology in Biochemical Engineering and Biotechnology
Department of Biochemical Engineering and Biotechnology
The overall credits structure Departmental Electives (DE)
Undergraduate Core (UC) Undergraduate Elective (UE) BED350 Mini Project (BB) 0-0-6 3
BEL311 Physical and Chemical Properties of 2-1-0 3
Category Credits Category Credits
Biomolecules
DC 60 DE 20 BEL312 Carbohydrates and Lipids in Biotechnology 2-1-0 3
BS 20 HM 14 BEL411 Food Science and Engineering 3-0-0 3
BEL412 Immunology 3-0-2 4
EAS 20 OC 35 BEL413 Modelling and Simulation of Bioprocesses 3-0-2 4
HU 1 BEL414 Thermodynamics of Biological Systems 3-0-0 3
TOTAL 101 TOTAL 69 BEL415 Advanced Bioprocess Control 3-0-0 3
BEL416 Membrane Applications in Bioprocessing 3-0-0 3
BEL417 Biophysics 3-0-0 3
Program Core (PC) Program Elective (PE) BEL418 Bioinformatics 2-0-2 3
Category Credits Category Credits BEL419 Enzyme Catalyzed Organic Synthesis 2-0-2 3
BEL420 Analytical Methods in Biotechnology 2-0-2 3
PC 32 PE 16 BEL421 Metabolic Regulation and Engineering 3-0-0 3
Total credits = 218 BEL422 Solid State Cultivation 3-0-0 3
BER350 Professional Practices (BB) 0-1-2 2
BES350 Independent Study (BB) 0-3-0 3
Basic Sciences (BS) Core
BEV330 Special Module in Biochemical Engineering 1-0-0 1
CYL120 Inorganic and Organic Chemistry: 3-1-0 4
and Biotechnology
Concepts and Applications
CHL277 Materials of Construction 3-0-0 3
CYP100 Chemistry Laboratory 0-0-4 2
CHL332 Fluidization Engineering 3-1-0 4
MAL110 Mathematics - I 3-1-0 4
CHL392 Polymer Science and Engineering 3-1-0 4
MAL120 Mathematics - II 3-1-0 4
PHL110 Fields and Waves 3-1-0 4
Program Core (PC)
PHP100 Physics Laboratory 0-0-4 2
TOTAL BS Core 12-4-8 20 BEC750 Seminar (BB) 1-0-0 NC
BED851 Major Project Part 1 (BB) 0-0-12 6
Engineering Arts and Sciences (EAS) Core BED852 Major Project Part 2 (BB) 0-0-28 14
BED853 Major Project Part 1 (BB) 0-0-8 4
AML110 Engineering Mechanics 3-0-2 4
BED854 Major Project Part 2 (BB) 0-0-32 16*
CHL110 Transport Phenomena 3-1-0 4
BEL701 Biotechnology Resource Planning and 2-0-0 2*
CSL101 Introduction to Computers and Programming 3-0-2 4
IPR Issues
OR
BEL702 Bioprocess Plant Design 3-0-4 5
CSL102 Introduction to Computer Science 3-0-2 4
BEL703 Downstream Processing in Biotechnology 3-0-4 5
MEL110 Graphic Science 2-0-4 4
TOTAL PC 9-0-48 32
MEL120 Manufacturing Practices 2-0-4 4
TOTAL EAS Core 13-1-12 20
* BED853 and BED854 together are alternatives to BED851 and
Humanities and Social Sciences (HU) Core BED852.
HUN100 Introduction to Humanities and Social Sciences 1-0-0 1
Program Electives (PE)
Departmental Core (DC) BEL711 Recombinant DNA Technology 2-0-4 4
BEC450 Colloquium (BB) 0-3-0 3 BEL712 Plant Cell Technology 2-0-2 3
BEL101 Biochemistry 3-1-3 5.5 BEL713 Microbial Engineering 3-0-0 3
BEL102 Bioprocess Calculations 3-1-0 4 BEL714 Protein Science and Engineering 3-0-0 3
BEL103 General Microbiology 3-0-3 4.5 BEL715 Biological Waste Treatment 3-0-2 4
BEL204 Molecular Biology and Genetics 3-0-3 4.5 BEL716 High Resolution Methods in Biotechnology 2-0-2 3
BEL301 Bioprocess Engineering 3-0-0 3 BEL717 Animal Cell Technology 3-0-2 4
BEL302 Fluid Solid Systems 3-0-0 3 BEL718 Combinatorial Biotechnology 3-0-0 3
BEL401 Bioprocess Technology 2-0-0 2 BEL719 Current Topics in Biochemical Engineering 3-0-0 3
BEL403 Enzyme Engineering and Technology 3-0-2 4 and Biotechnology
BEN150 Introduction to Biochemical Engineering 0-0-4 2 BEL720 Biotechnology in Food Processing 3-0-0 3
and Biotechnology BEL721 Bionanotechnology 3-0-0 3
BEP303 Design of Bioprocesses 0-1-3 2.5 BEL722 Genomics and Proteomics 3-0-0 3
BET450 Practical Training (BB) — NC BEL723 Data Analysis for DNA Microarrays 3-0-2 4
CHL101 Introduction to Chemical Engineering 2-1-0 3 BEL724 Advanced Biochemistry 3-0-0 3
Thermodynamics
CHL103 Chemical Reactor Analysis and Design 3-1-0 4
CHL202 Process Systems Analysis and Control 3-1-0 4
CHL203 Transport Processes - I 3-1-0 4
CHL204 Transport Processes - II 3-1-0 4
CHP304 Chemical Engineering Laboratory - I 0-0-3 1.5
CHP305 Chemical Engineering Laboratory - II 0-0-3 1.5
TOTAL DC 37-11-24 60
38
39
Programme Code: CH5 / (CC)
Bachelor of Technology in Chemical Engineering, and
Master of Technology in Computer Applications in Chemical Engineering
Department of Chemical Engineering
Departmental Electives (DE)
The overall credits structure CHD310 Mini Project (CH) 0-0-6 3
Undergraduate Core (UC) Undergraduate Elective (UE) CHL133 Powder Processing and Technology 3-1-0 4
Category Credits Category Credits CHL260 Applications of Programming in Chemical 3-0-2 4
Engineering
DC 60 DE 20 CHL275 Safety and Hazards in the Process Industries 3-1-0 4
BS 20 HM 14 CHL277 Materials of Construction 3-0-0 3
EAS 20 OC 35 CHL291 Introduction to Biochemical Engineering 3-1-0 4
CHL296 Nano Engineering of Soft Materials 3-0-0 3
HU 1 CHL332 Fluidization Engineering 3-1-0 4
TOTAL 101 TOTAL 69 CHL353 Modern Separation Processes 3-1-0 4
CHL390 Process Utilities and Pipeline Design 3-0-2 4
Program Core (PC) Program Elective (PE) CHL392 Polymer Science and Engineering 3-1-0 4
CHL705 Electrokinetic Transport Phenomena 3-0-2 4
Category Credits Category Credits CHL707 Adsorption Separation Processes 3-0-0 3
PC 32 PE 16 CHL710 Process Dynamics and Control 3-1-2 5
CHL724 Environmental Engineering and Waste 3-1-0 4
Total credits = 218 Management
CHL727 Heterogeneous Catalysis and Catalytic 3-0-2 4
Reactors
Basic Sciences (BS) Core CHL743 Petrochemical Technology 3-0-0 3
CYL110 Physical Chemistry: Concepts and Applications 3-1-0 4 CHL751 Multi-component Mass Transfer 3-0-0 3
CYL120 Inorganic and Organic Chemistry: 3-1-0 4 CHL766 Interfacial Engineering 3-0-0 3
Concepts and Applications CHL768 Fundamentals of Computational Fluid 2-0-2 3
CYP100 Chemistry Laboratory 0-0-4 2 Dynamics
MAL110 Mathematics - I 3-1-0 4 CHL773 Planning of Experiments and Analysis of 3-0-2 4
MAL120 Mathematics - II 3-1-0 4 Engineering Data
PHP100 Physics Laboratory 0-0-4 2 CHL774 Process Optimization 3-0-2 4
TOTAL BS Core 12-4-8 20 CHL793 Membrane Science and Engineering 3-0-0 3
CHL794 Petroleum Refinery Engineering 3-0-2 4
Engineering Arts and Sciences (EAS) Core CHR310 Professional Practices (CH) 0-1-2 2
AML120 Materials Science 3-0-2 4 CHS310 Independent Study (CH) 0-3-0 3
CSL101 Introduction to Computers and Programming 3-0-2 4
OR Program Core (PC)
CSL102 Introduction to Computer Science 3-0-2 4 CHC750 Seminar (CC) 0-0-2 1
EEL102 Principles of Electrical Engineering 3-0-2 4 CHD851 Major Project Part 1 (CC) 0-0-12 6
MEL110 Graphic Science 2-0-4 4 CHD852 Major Project Part 2 (CC) 0-0-28 14
MEL120 Manufacturing Practices 2-0-4 4 CHD853 Major Project Part 1 (CC) 0-0-8 4*
TOTAL EAS Core 13-0-14 20 CHD854 Major Project Part 2 (CC) 0-0-32 16*
CHL711 Numerical Methods in Chemical Engineering 3-0-2 4
Humanities and Social Sciences (HU) Core CHL712 Computer Aided Design in Chemical 2-0-2 3
HUN100 Introduction to Humanities and Social Sciences 1-0-0 1 Engineering
CHL762 Modelling, Simulation and Control 3-0-2 4
Departmental Core (DC) TOTAL PC 8-0-48 32
CHC410 Colloquium (CH) 0-3-0 3
CHL110 Transport Phenomena 3-1-0 4 * CHD853 and CHD854 together are alternatives to CHD851 and
CHL111 Material and Energy Balance 2-2-0 4 CHD852.
CHL112 Chemical Process Technology 3-1-0 4
CHL121 Chemical Engineering Thermodynamics 3-1-0 4 Program Electives (PE)
CHL122 Chemical Reaction Engineering – I 3-1-0 4
CHL710 Process Dynamics and Control 3-1-2 5
CHL221 Chemical Reaction Engineering – II 3-1-0 4
CHL763 Computer Process Control 3-0-0 3
CHL231 Fluid Mechanics for Chemical Engineers 3-1-0 4
CHL768 Fundamentals of Computational Fluid 2-0-2 3
CHL251 Heat and Mass Transfer 3-1-0 4
Dynamics
CHL261 Instrumentation and Process Control 3-1-0 4
CHL774 Process Optimization 3-0-2 4
CHL331 Fluid-particle Mechanics 3-1-0 4
CHL807 Population Balance Modelling 3-0-0 3
CHL351 Mass Transfer Operations 3-1-0 4
CHL830 Advanced Computational Techniques in 2-0-2 3
CHL471 Process Equipment Design and Economics 3-0-3 4.5
Chemical Engineering
CHN110 Introduction to Chemical Engineering 0-0-4 2
CHL864 Applications of AI and ANN in Chemical 3-0-2 4
CHP301 Fluid Mechanics and Heat Transfer Laboratory 0-0-3 1.5
Engineering
CHP302 Mass Transfer and Fluid Particle Mechanics 0-0-3 1.5
CHL869 Applications of Computational Fluid Dynamics 2-0-2 3
Laboratory
CHP754 Applications of Simulation Software 1-0-2 2
CHP303 Chemical Reaction Engineering and 0-0-3 1.5
EEL758 Intelligent and Knowledge Based Systems 3-0-0 3
Process Control Laboratory
CHP311 Design and Laboratory Practices 0-0-4 2
CHT410 Practical Training (CH) — NC
TOTAL DC 35-15-20 60
40
41
Programme Code: CH6 / (CP)
Bachelor of Technology in Chemical Engineering, and
Master of Technology in Process Engineering and Design
Department of Chemical Engineering
The overall credits structure Departmental Electives (DE)
Undergraduate Core (UC) Undergraduate Elective (UE) CHD310 Mini Project (CH) 0-0-6 3
Category Credits Category Credits CHL133 Powder Processing and Technology 3-1-0 4
CHL260 Applications of Programming in Chemical 3-0-2 4
DC 60 DE 20 Engineering
BS 20 HM 14 CHL275 Safety and Hazards in the Process Industries 3-1-0 4
EAS 20 OC 35 CHL277 Materials of Construction 3-0-0 3
CHL291 Introduction to Biochemical Engineering 3-1-0 4
HU 1 CHL296 Nano Engineering of Soft Materials 3-0-0 3
TOTAL 101 TOTAL 69 CHL332 Fluidization Engineering 3-1-0 4
CHL353 Modern Separation Processes 3-1-0 4
CHL390 Process Utilities and Pipeline Design 3-0-2 4
Program Core (PC) Program Elective (PE) CHL392 Polymer Science and Engineering 3-1-0 4
Category Credits Category Credits CHL705 Electrokinetic Transport Phenomena 3-0-2 4
PC 32 PE 16 CHL707 Adsorption Separation Processes 3-0-0 3
CHL710 Process Dynamics and Control 3-1-2 5
Total credits = 218 CHL724 Environmental Engineering and Waste 3-1-0 4
Management
Basic Sciences (BS) Core CHL727 Heterogeneous Catalysis and Catalytic 3-0-2 4
CYL110 Physical Chemistry: Concepts and Applications 3-1-0 4 Reactors
CYL120 Inorganic and Organic Chemistry: 3-1-0 4 CHL743 Petrochemical Technology 3-0-0 3
Concepts and Applications CHL751 Multi-component Mass Transfer 3-0-0 3
CYP100 Chemistry Laboratory 0-0-4 2 CHL766 Interfacial Engineering 3-0-0 3
MAL110 Mathematics - I 3-1-0 4 CHL768 Fundamentals of Computational Fluid 2-0-2 3
MAL120 Mathematics - II 3-1-0 4 Dynamics
PHP100 Physics Laboratory 0-0-4 2 CHL773 Planning of Experiments and Analysis of 3-0-2 4
TOTAL BS Core 12-4-8 20
Engineering Data
CHL774 Process Optimization 3-0-2 4
Engineering Arts and Sciences (EAS) Core
CHL793 Membrane Science and Engineering 3-0-0 3
AML120 Materials Science 3-0-2 4
CHL794 Petroleum Refinery Engineering 3-0-2 4
CSL101 Introduction to Computers and Programming 3-0-2 4
CHR310 Professional Practices (CH) 0-1-2 2
OR
CHS310 Independent Study (CH) 0-3-0 3
CSL102 Introduction to Computer Science 3-0-2 4
EEL102 Principles of Electrical Engineering 3-0-2 4
MEL110 Graphic Science 2-0-4 4 Program Core (PC)
MEL120 Manufacturing Practices 2-0-4 4 CHC760 Seminar (CP) 0-0-2 1
TOTAL EAS Core 13-0-14 20 CHD861 Major Project Part 1 (CP) 0-0-12 6
CHD862 Major Project Part 2 (CP) 0-0-28 14
Humanities and Social Sciences (HU) Core CHD863 Major Project Part 1 (CP) 0-0-8 4*
HUN100 Introduction to Humanities and Social Sciences 1-0-0 1 CHD864 Major Project Part 2 (CP) 0-0-32 16*
CHL701 Process Engineering 3-0-2 4
Departmental Core (DC) CHL702 Plant Design 3-0-2 4
CHC410 Colloquium (CH) 0-3-0 3 CHL761 Chemical Engineering Mathematics 3-0-0 3
CHL110 Transport Phenomena 3-1-0 4 TOTAL PC 9-0-46 32
CHL111 Material and Energy Balance 2-2-0 4
CHL112 Chemical Process Technology 3-1-0 4 * CHD863 and CHD864 together are alternatives to CHD861 and
CHL121 Chemical Engineering Thermodynamics 3-1-0 4 CHD862.
CHL122 Chemical Reaction Engineering – I 3-1-0 4 Program Electives (PE)
CHL221 Chemical Reaction Engineering – II 3-1-0 4 CHL710 Process Dynamics and Control 3-1-2 5
CHL231 Fluid Mechanics for Chemical Engineers 3-1-0 4 CHL714 Advanced Heat Transfer 3-0-0 3
CHL251 Heat and Mass Transfer 3-1-0 4 CHL717 Mechanical Design of Process Equipment 3-0-2 4
CHL261 Instrumentation and Process Control 3-1-0 4 CHL723 Chemical Reaction and Reactor Engineering 3-0-0 3
CHL331 Fluid-particle Mechanics 3-1-0 4 CHL724 Environmental Engineering and Waste 3-1-0 4
CHL351 Mass Transfer Operations 3-1-0 4 Management
CHL471 Process Equipment Design and Economics 3-0-3 4.5
CHL735 Design of Separation Processes 3-0-2 4
CHN110 Introduction to Chemical Engineering 0-0-4 2
CHL751 Multi-component Mass Transfer 3-0-0 3
CHP301 Fluid Mechanics and Heat Transfer Laboratory 0-0-3 1.5
CHL794 Petroleum Refinery Engineering 3-0-2 4
CHP302 Mass Transfer and Fluid Particle Mechanics 0-0-3 1.5
CHL813 Thermodynamics and Process Design 2-0-2 3
Laboratory
CHP303 Chemical Reaction Engineering and 0-0-3 1.5 CHP711 Process Development Laboratory 0-0-6 3
Process Control Laboratory
CHP311 Design and Laboratory Practices 0-0-4 2
CHT410 Practical Training (CH) — NC
TOTAL DC 35-15-20 60
42
43
Programme Code: CS5 / (CO)
Bachelor of Technology in Computer Science and Engineering, and
Master of Technology in Computer Science and Engineering
Department of Computer Science and Engineering
The overall credits structure CSL705 Theory of Computation 3-1-0 4
Undergraduate Core (UC) Undergraduate Elective (UE) CSL719 Synthesis of Digital Systems 3-0-2 4
CSL728 Compiler Design 3-0-3 4.5
Category Credits Category Credits
CSL740 Software Engineering 3-0-2 4
DC 54 DE 24 CSL750 Foundations of Automatic Verification 3-0-2 4
BS 24 HM 14 CSL771 Database Implementations 3-0-2 4
CSL781 Computer Graphics 3-0-3 4.5
EAS 20 OC 31 CSL783 Digital Image Analysis 3-0-3 4.5
HU 1 CSP315 Embedded System Design Laboratory 0-1-6 4
CSR310 Professional Practices (CS) 0-1-2 2
TOTAL 99 TOTAL 69 CSS310 Independent Study (CS) 0-3-0 3
44
45
Programme Code: EE5 / (EI)
Bachelor of Technology in Electrical Engineering, and
Master of Technology in Information and Communication Technology
Department of Electrical Engineering
The overall credits structure Departmental Electives (DE)
Undergraduate Core (UC) Undergraduate Elective (UE) The list of Departmental Elective courses for this dual degree program
Category Credits Category Credits is identical to the list of Departmental Elective courses for the 4-year
Bachelor of Technology in Electrical Engineering program. Please
DC 59 DE 21 refer to the list given on page no. 26.
BS 20 HM 14 Also see EE1 Programme for Elective streams DE-A, -B, -C.
EAS 21 OC 34 Program Core (PC)
HU 1 EED851 Major Project Part 1 (EI) 0-0-12 6
TOTAL 101 TOTAL 69 EED852 Major Project Part 2 (EI) 0-0-28 14
EED853 Major Project Part 1 (EI) 0-0-8 4*
EED854 Major Project Part 2 (EI) 0-0-32 16*
Program Core (PC) Program Elective (PE) EEL703 Computer Networks 3-0-0 3
Category Credits Category Credits EEL707 Multimedia Systems 3-0-2 4
EEL711 Signal Theory 3-0-0 3
PC 32 PE 16 EEP702 Software Laboratory 0-0-4 2
Total credits = 218 TOTAL PC 9-0-46 32
46
47
Programme Code: MT5 / (MT)
Master of Technology in Mathematics and Computing
Department of Mathematics
48
49
50
5. MINOR AREA STRUCTURES
51
Minor Area in Biochemical Engineeirng and Biotechnology
Department of Biochemical Engineering and Biotechnology
Eligibility/Restrictions
As per section 3.12.4
Core courses
BEL110 Molecular Cell Biology 3-0-0 3
CHL291 Introduction to Biochemical Engineering 3-1-0 4
Elective courses
BEL401 Bioprocess Technology 2-0-0 2
BEL413 Modelling and Simulation of Bioprocesses 3-0-2 4
BEL416 Membrane Applications in Bioprocessing 3-0-0 3
BEL418 Bioinformatics 2-0-2 3
BEL422 Solid State Cultivation 3-0-0 3
BEL701 Biotechnology Resource Planning and IPR Issues 2-0-0 2
BEL713 Microbial Engineering 3-0-0 3
BEL714 Protein Science and Engineering 3-0-0 3
BEL715 Biological Waste Treatment 3-0-2 4
BEL720 Biotechnology in Food Processing 3-0-0 3
BEL721 Bionanotechnology 3-0-0 3
Minor Area in Business Management
Department of Management Studies
Eligibility/Restrictions
As per section 3.12.4
Core courses
SML391 Organization and Human Resource Management 3-1-0 4
SML494 Management Accounting and Financial Management 3-1-0 4
Elective courses
SML710 Creative Problem Solving 2-0-2 3
SML713 Information Systems Management 2-0-2 3
SML720 Business Environment and Corporate Strategy 2-0-2 3
SML740 Quantitative Methods in Management 2-0-2 3
SML745 Operations Management 2-0-2 3
SML760 Marketing Management 2-0-2 3
SML780 Managerial Economics 2-0-2 3
SML887 Business Law 2-0-2 3
52
Minor Area in Computer Science and Engineering
Department of Computer Science and Engineering
Eligibility/Restrictions
As per section 3.12.4.Also, this minor area is not available to students of the following programmes: (i) B. Tech. in
Electrical Engineering (EE1), (ii) Dual degree B.Tech. in Electrical Engineering + M.Tech. in (Information and
Communication Technology) (EE5), and (iii) Integrated M.Tech. in Mathematics and Computing (MT5).
Core courses
CSL201 Data Structures 3-0-2 4
CSL211 Computer Architecture 3-1-2 5
Elective courses
CSL302 Programming Languages 3-0-4 5
CSL332 Introduction to Database Systems 3-0-3 4.5
CSL356 Analysis and Design of Algorithms 3-1-0 4
CSL373 Operating Systems 3-0-4 5
CSL374 Computer Networks 3-0-3 4.5
CSL433 Artificial Intelligence 3-0-2 4
Minor Area in Energy Technology
Department of Mechanical Engineering
Eligibility/Restrictions
As per section 3.12.4
Core courses
MEL140 Engineering Thermodynamics 3-1-0 4
MEL241 Energy Conversion 3-0-2 4
Elective courses
MEL242 Heat and Mass Transfer 3-1-0 4
MEL341 Gas Dynamics and Propulsion 3-0-2 4
MEL342 Power Plant Technologies 3-0-2 4
MEL343 Fuels, Combustion and Pollution 3-0-2 4
MEL345 I.C. Engines 3-0-2 4
MEL346 Turbo-machinery 3-0-2 4
MEP341 Thermal Engineering Laboratory 0-0-3 1.5
Minor Area in Nano Science and Engineering
Department of Physics
Eligibility/Restrictions
As per section 3.12.4
Core courses
PHL120 Physics of Materials 3-1-0 4
EPL206 Solid State Physics 3-1-0 4
Elective courses
BEL721 Bionanotechnology 3-0-0 3
CHL296 Nano Engineering of Soft Materials 3-0-0 3
EPL211 Principles of Material Synthesis 3-1-0 4
EPL335 Low Dimensional Physics 3-1-0 4
EPL444 Functional Nanostructures 3-0-0 3
EPL446 Applied Electrodynamics and Radiation 3-0-0 3
EPV430 Special Topics in Nano-Technology 1-0-0 1
EPV450 Selected Topics in Nano-Technology 2-0-0 2
PHL727 Quantum Heterostructures 3-0-0 3
53
Minor Area in Photonics
Department of Physics
Eligibility/Restrictions
As per section 3.12.4
Core courses
PHL110 Fields and Waves 3-1-0 4
EPL105 Optics 3-1-0 4
Elective courses
EPL334 Lasers 3-0-0 3
EPL336 Semiconductor Optoelectronics 3-1-0 4
EPL440 Quantum Electronics 3-0-0 3
EPL442 Fiber and Integrated Optics 3-0-0 3
EPL443 Holography and Optical Information Processing 3-0-0 3
EPL445 Engineering Optics 3-0-0 3
EPV431 Special Topics in Photonics and Opto-electronics 1-0-0 1
EPV451 Selected Topics in Photonics and Opto-electronics 2-0-0 2
Minor Area in Process Engineering
Department of Chemical Engineering
Eligibility/Restrictions
As per section 3.12.4 Also, this minor area is not available to students of Dual degree B.Tech. and M.Tech in Biochemical
Engineering and Biotechnology (BB5).
Core courses
CHL110 Transport Phenomena 3-1-0 4
CHL111 Material and Energy Balance 2-2-0 4
Elective courses
CHL112 Chemical Process Technology 3-1-0 4
CHL231 Fluid Mechanics for Chemical Engineers 3-1-0 4
CHL251 Heat and Mass Transfer 3-1-0 4
CHL122 Chemical Reaction Engineering-I 3-1-0 4
CHL261 Instrumentation and Process Control 3-1-0 4
CHL331 Fluid-particle Mechanics 3-1-0 4
CHL275 Safety and Hazards in the Process Industries 3-1-0 4
Minor Area in Systems Dynamics and Control
Department of Mechanical Engineering
Eligibility/Restrictions
As per section 3.12.4
Core courses
MEL211 Kinematics and Dynamics of Machines 3-0-2 4
Elective courses
MEL312 Control Theory and Applications 3-1-2 5
MEL316 Mechanical Vibrations 3-0-2 4
MEL411 Mechatronics 3-0-2 4
MEL415 Vibrations Engineering Design 3-0-2 4
MEL416 Robotics Engineering 3-1-0 4
54
6. COURSE DESCRIPTIONS
55
Department of Applied Mechanics
AMD310 Mini Project (AM) Introduction, fundamental concepts, mathematical
3 credits (0-0-6) preliminaries.
Pre-requisites: EC 80
Analysis of strain deformation, strain displacement
A project will be specified by the concerned teacher and it
relations, Normal and shear strains, Transformation,
is expected that under his/her guidance the students will carry
Principal strains and Maximum shear strains, Volumetric
out all the activities related to the project.
strain, Compatibility equations, Plane strain, Stain rosettes,
AML110 Engineering Mechanics Velocity field and strain rates.
4 credits (3-0-2)
Laws of mechanics, equivalent force systems and equations Constitutive relations; Hookean elastic solids, Yield criteria
of equilibrium, Internal forces in structures and beams, friction and plasticity, Viscoelasticity, Non-viscous fluid, Newtonian
and its applications, Kinematics of point mass and rigid body, fluid.
Center of mass, System of particles, Inertia tensor, Dynamics Solid mechanics applications – Axisymmetric thin shells,
of rigid bodies, Euler ’s equations of motion, Impulse- Uniaxial deformation. Torsion, bending, buckling, etc.
momentum, Work-energy methods with applications, Principle
of virtual work and stability. Fluid mechanics applications – Fluid statics, fluid motion;
Material and spatial description. Integral and differential flow
AML120 Materials Science analysis, ideal fluid flow, simple viscous flow, Dimensional
4 credits (3-0-2) analysis.
Structures of materials – crystal structure, substructure,
microstructure, etc. Phase diagram and phase transformation. AML160 Mechanics of Fluids
Diffusion phenomenon. Mechanical behavior – strength, 4 credits (3-1-0)
hardness, deformation, creep, fatigue, etc. Mechanisms of Overlaps with: AML150, AML170, CHL231, CHL204
strengthening and toughening of materials. Metallic alloys, Introduction. Definitions. Fluid properties: classification of
Ceramics, Polymeric and Composite materials. Conductors, fluids and flow regimes. Fluid statics: Stationary fluids and
semiconductors and magnetic materials. liquids subjected to constant linear acceleration and to constant
rotation. Fluid kinematics: Lagrangian and Eulerian
AML130 Experimental Methods and Analysis descriptions, pathlines, streaklines and streamlines,
5 credits (3-1-2) acceleration. Integral flow analysis: Reynolds transport
(a) Experimental Analysis: measurements and errors, theorem, conservation of mass/continuity equation and
internal and external estimates of errors, statistical analysis, conservation of linear and angular momentum for a control
accuracy and precision, best estimate, accuracy of the mean, volume in inertial and accelerating reference frames, energy
significant digits, methods of least squares, curve fitting, linear equation, Bernoulli’s equation, engineering applications.
regression, comparison and combination of measurements, Differential analysis of flow: Continuity and Navier-Stokes
extensions least square method. Theory of errors, Gaussian equations. Dimensional analysis and Similitude theory.
distribution, confidence limits, significance test, and goodness Inviscid flows: Irrotational flow, circulation, velocity potential
of fit. and applications. Viscous flows in pipes and ducts. External
(b) Instrumentation: Principle of measurements, Basic viscous flows: concept of boundary layer, momentum integral
elements of measurement device, various types of equation, drag and lift, separation. Fluid machinery:
measurement systems, standards and calibration, Dynamic Introduction and classification of machines, types of hydraulic
characteristics of first and second order instruments, turbines and pumps and their performance characteristics,
Transducers. turbomachinery analysis and velocity triangles, cavitation,
NPSH concept, similarity rules, applications.
(c) Experimental Devices: displacement measurement dial
gauge, optical method pneumatic transducer, variable AML170 Fluid Mechanics
resistance, inductance and capacitance transducer, Seismic 5 credits (3-1-2)
devices for motion measurement. Principle of planimeter, Overlaps with: AML150, AML160, CHL231,
Strain and stress measurements, Force and torque CHL204, AMP262
measurements, various types of load cells and their Introduction, fluid properties, classification, fluid statics, rigid
applications. body motions, kinematics of fluid motions, Reynolds transport
theorem, mass, momentum and energy laws with applications,
AML140 Mechanics of Solids governing equations for Newtonian fluids, exact solutions,
4 credits (3-1-0) laminar and turbulent pipe flow. Introduction to boundary layer
Overlaps with: AML150, AML180 theory, Dimensional analysis and modelling, open channel flow.
Introduction, Definition of stress, Equations of equilibrium,
Principal stress, Maximum shear stress, Plane stress, Concept AML180 Solid Mechanics
of strain, Strain displacement relations, Principal strains, Plane 5 credits (3-1-2)
strain, Constitutive relations, Uniaxial tension test, Idealized Overlaps with: AML140,AML150, AMP262
stress-strain diagram, Isotropic linear elastic, viscoelastic and Introduction, Definition of stress, Equations of equilibrium,
plastic materials, Uniaxial deformations, Thermal stresses, Principal stress, Maximum shear stress, Plane stress, Concept
Torsion of shafts, Bending and shear of beams, Energy of strain, Strain displacement relations, Principal strains, Plane
methods, Fracture, Deflection, Stability. strain, Constitutive relations, Uniaxial tension test, Idealized
AML150 Mechanics of Solids and Fluids stress-strain diagram, Isotropic linear elastic, viscoelastic and
5 credits (3-1-2) plastic materials, Uniaxial deformations, Thermal stresses,
Overlaps with: AML140, AML160, AML170, Torsion of shafts, Bending and shear of beams, Energy
AML180, CHL231, CHL204, AMP262 methods, Fracture, Deflection, Stability.
56
Applied Mechanics
57
Applied Mechanics
(ii) finite elements in fluids, (iii) reduced integration patch dimensional elasticity problems. Classical solution using
test, (iv) dynamic FE analysis, (v) geometrically nonlinear Airy’s stress function. Finite Element formulation-problems
problems. (vi) material nonlinearity. (vii) automated mesh involving initial stress and initial strain. Axisymmetric
generation. (viii) pre and post processing. (ix) solid fluid problems-classical solution. Finite Element solution of free
interaction problems. (x) efficient solution technique-PCG, vibration problems. Principles of transient dynamic analysis.
domain decomposition. (xi) point source method. (xii) Laboratory work for the solution of solid mechanics problems
boundary element method. (xiii) aero elastic flutter. (xiv) other
using FE packages.
special topics.
AML710 Computer Aided Design and Design
AML440 Parallel Processing in Computational
Methods
Mechanics 4 credits (3-0-2)
4 credits (3-0-2) Pre-requisites: EC 60
Pre-requisites: AML310 Overlaps with: MEL414
Advanced topics in computational solid/fluid mechanics to Design methodology including Needs analysis. Problem
suit specific student needs and topics chosen from the
formulation, Synthesis of alternatives, Product visualization,
following: Finite element analysis of plates and shells, Finite
Modelling analysis and optimization, detailed design,
elements in fluids, Reduced integration patch test, Dynamic
prototype-construction and testing, design development
FE analysis, Geometrically nonlinear problems, Material
nonlinearity, Automated mesh generation, Pre and Post Introduction to computer graphics-mathematical approach to
processing, Solid fluid interaction problems, Efficient solution transformation and projections. Representation of curves and
technique-PCG, domain decomposition, Point source method, surfaces. Hidden surface removal algorithms-rendering-
Boundary element method, Aero elastic flutter, Other Special introduction to Solid modelling principles – B rep modelers –
Topics. CSG modelers. Representation of Boolean operations on
primitives. Computer-aided drafting. Practical work with
AML705 Finite Element Methods drafting systems, solid modelers and development of graphics
4 credits (3-0-2) packages.
Pre-requisites: AML140 / AML150 / AML160 /
AML170 / AML180 / CHL231 / CHL204 AMP262 Fluids and Solids Laboratory
Overlaps with: MAL381 1.5 credits (0-0-3)
Introduction to Finite Element Principles. Derivation of the Pre-requisites: AML140 & AML160
discretized equations using variational principle. Galerkin and Overlaps with: AML150 / AML170 / AML180
other approaches-solution of 1-D problems, Assemby, Experiments will build-up on knowledge of Mechanics of
Imposition of boundary conditions, Solution of large systems. Solids and Mechanics of Fluids. Applications of uncertainty
St. Venant’s torsion problem, Classical solution. Finite analyses. A professional report is to be prepared for each
Element solution. Analogy to other field problems. Two- experiment. Students work in a group of two.
58
Department of Biochemical Engineering & Biotechnology
BEC450 Colloquium (BB) chromatography; Gel electrophoresis, Determination of
3 credits (0-3-0) enzymatic activities and determination of Km, Vmax; Identification
Pre-requisites: registered for BET450 of intermediates of EMP pathway.
Each student is to make a minimum of three presentations
BEL102 Bioprocess Calculations
of about 30 minutes duration. Topics for these presentations
4 credits (3-1-0)
could be drawn from the practical training experience or other
Overlaps with: CHL231, CHL251
scientific documents/publications.
Units and dimensions, Fundamentals of material balance,
BEC750 Seminar (BB) Balance on unit processes and reactive systems, Behaviour
1 credit (1-0-0) of ideal and real gases, vapour pressure, humidity and
Pre-requisites: EC 165 saturation. Energy balance, Heat capacity of gases, liquid and
Literature study on a selected topic. Report writing. Seminar solids, Latent heat, Heat of reaction, formation and combustion,
presentations. Solution and dilution, Energy balance of reactive and non-
reactive processes. Stoichiometric relations and yield
BED350 Mini Project (BB) concepts, Maintenance coefficient, Mass balance based on
3 credits (0-0-6) available electron concept. Unsteady state material and energy
Pre-requisites: EC 80 balance in bioprocess.
No fixed course content. Study to concentrate on a selected
topic under the supervision of a faculty member of the BEL103 General Microbiology
department. 4.5 credits (3-0-3)
Lectures: Introduction-aims and scope. Role of microbes in
BED851 Major Project Part 1 (BB) agriculture, public health, medicine and industry. Organization
6 credits (0-0-12) of prokaryotic and eukaryotic cells: Structure and function of
Pre-requisites: EC 165 cell organelles and surface structure and cellular reserve
Overlaps with: BED853 materials; Distinguishing features of various groups of
Initial phase of the major project chosen by the student under microorganisms: actinomycetes, bacteria, molds, yeasts and
a pre-designated supervisor. Projects are to be individual and algae and their broad classification. Characteristics of selected
should be an in-depth intensive effort. groups of microorganisms including microorganisms of
BED852 Major Project Part 2 (BB) extreme environment. Microbial nutrition and growth-principles
14 credits (0-0-28) of nutrition, growth measurement techniques, effect of
Pre-requisites: BED851 environmental and culture parameters on growth, assimilation
Overlaps with: BED854 of nitrogen and sulphur. Isolation and preservation of cultures.
Continuation and completion of the work started as of Major Energy transduction in microbial systems: fermentation,
Project Part 1. aerobic and anaerobic respiration. Phototrophic
microorganisms, Phosphoketolase, Entner-Doudoroff and
BED853 Major Project Part 1 (BB) glyoxalate pathways. Control of microbial growth – effect of
4 credits (0-0-8) heat, disinfectants and therapeutic agents. Microbial
Pre-requisites: EC 165 pathogenicity, Bioassays.
Overlaps with: BED851
Initial phase of the major project chosen by the student under Laboratory: Preparation and sterilization of media,
a pre-designated supervisor. Projects are to be individual and examination of possible sources of contamination; microscopic
should be an in-depth intensive effort. examination of different groups of microorganisms; aseptic
technique; simple and differential staining; isolation of a pure
BED854 Major Project Part 2 (BB) culture - use of enrichment media; growth and enumeration of
16 credits (0-0-32) microorganisms; effect of physical and chemical environment
Pre-requisites: BED853 on growth; selected biochemical tests; isolation of auxotropic
Overlaps with: BED852 mutants; microbiological assay of antibiotics.
Continuation and completion of the work started as of Major
BEL110 Molecular Cell Biology
Project Part 1.
3 credits (3-0-0)
BEL101 Biochemistry Overlaps with: BEL101, BEL103
5.5 credits (3-1-3) Biology-technology interface; Cell structure and function;
Course contents (about 100 words): Introduction-aims and Noncovalent interactions in living cells; Molecules in cell;
scope; Non-covalent interactions in biological systems, Enzymes: Structure, Catalysis, Industrial applications;
Carbohydrates-structure and function; Proteins-structure and Membrane transport; Bioenergetics; Introduction to
function; Nucleic acids-structure and function; Protein metabolism; Information storage and processing in cells; Cell
purification techniques; Introduction to enzymes; Vitamins and signaling; Nerve cells and electrical properties; Techniques in
coenzymes; Lipids and biological membranes; Transport cell and molecular biology; Cell evolution: biochemical
across cell membrane; Design of metabolism; Metabolic capacities.
pathways for breakdown of carbohydrates-glycolysis, pentose
BEL204 Molecular Biology and Genetics
phosphate pathway, citric acid cycle, electron transport chain, 4.5 credits (3-0-3)
Photo-phosphorylation; Oxidation of fatty acids; Pre-requisites: BEL101 & BEL103
Gluconeogenesis and control of glycogen metabolism, Signal Historical development and essentials of Mendelian
transduction. genetics. Chromosomal theory of inheritance. Evolution and
Laboratory : Estimation of proteins and nucleic acids; development of molecular biology. DNA model and classes.
Extraction of lipids; Separation of lipids using thin layer Organization of eukaryotic chromosome – the chromatin
chromatography, Gel filtration and ion exchange structure. Genetic Information and its perpetuation – DNA
59
Biochemical Engineering & Biotechnology
replication and repair. Transcription, translation. Molecular bioconversion processes. Inoculum development. Process
biology of bacteriophage lamda. Gene exchange in bacteria. technology for production of primary metabolites, such as
Gene regulation in prokaryotes. The operon model – lac, ara, baker ’s yeast, ethanol, citric acid, amino acids,
trp operons and gene regulation. polysaccharides and plastics. Microbial production of industrial
enzymes- glucose isomerase, cellulase, amylase, protease
Laboratory : Isolation of DNA, Denaturation of DNA, etc.. Production of secondary metabolites- penicillins and
isolation of chromatin, lambda DNA, transformation, cephalosporins.
conjugation. Gene induction.
BEL403 Enzyme Engineering and Technology
BEL301 Bioprocess Engineering 4 credits (3-0-2)
3 credits (3-0-0) Pre-requisites: BEL401
Pre-requisites: BEL101 & BEL103 and EC 60 Introduction and Scope; Chemical and Functional nature
Overlaps with: CHL291 of enzymes; Application of enzymes in process industries
Microbial growth, substrate utilisation and product formation and health care; Microbial production and purification
kinetics; simple structured models; air sterilization; media of industrial enzymes, Kinetics of enzyme catalyzed
sterilization; batch, fed-batch and continuous processes; reactions; Immobilization of enzymes; Stabilization of
aeration and agitation; rheology of fermentation fluids; scale- enzymes.
up concepts; design of fermentation media; aseptic transfer;
various types of microbial and enzyme reactors; Bioreactors for soluble and immobilized enzymes, Mass
instrumentation in bioreactors. transfer and catalysis in immobilized enzyme reactors; Case
studies of some industrial enzymatic processes.
BEL302 Fluid Solid Systems
3 credits (3-0-0) Enzyme based biosensors; Enzyme catalyzed processes
Pre-requisites: CHL203 with cofactor regeneration; Enzymatic reactions in micro-
Overlaps with: CHL331 aqueous medium and non-conventional media.
Size reduction; crushing and grinding; equipment for size Laboratory: assay of enzyme activity and specific activity;
reduction; screening; design procedure;Flow of fluids past a Kinetic analysis of an enzyme catalyzed reaction;
stationary particle for low, medium and high Reynolds Immobilization of enzymes by adsorption and covalent binding;
numbers; sedimentation and sedimentation theory; thickeners Salt precipitation of an enzyme; Immobilization of microbial
and classifiers; flow through packed beds; flow distribution, cells by entrapment; Effect of water activity and solvent on
packings and pressure drop calculations; fluidization; filtration the lipase catalyzed esterification reaction.
theory and its application in plate and frame and rotary vacuum
BEL411 Food Science and Engineering
filters; solid-liquid separation using centrifugation; ‘S’ concept
3 credits (3-0-0)
in centrifugation for scale-up; different types of centrifuges and
Pre-requisites: BEL301
their design; application for biological suspensions.
Chemical constituents of foods, their properties and
BEL311 Physical and Chemical Properties of functions; Characteristic features of natural and processed
Biomolecules foods; Chemical/biochemical reactions in storage/handling of
3 credits (2-1-0) foods; Units operations in food processing – size reduction,
Pre-requisites: BEL101 and EC 60 evaporation, filtration etc.; Methods for food preservation;
Introduction: characteristic features of biological systems, Rheology of food products; Flavour, aroma and other additives
structure-functions relationships in biomolecules; in processed foods; Case studies of a few specific food
Characterization of macromolecules: molecular shape and processing sectors, cereals, protein foods, meat, fish and
size; molecular weight; Transport properties of solution- poultry, vegetable and fruit, milk products; legislation, safety
Applications in deducing conformation of biomolecules: and quality control.
viscosity, Diffusion, Ultra centrifugation, electrophoresis; BEL412 Immunology
Optical properties of biomacromolecules; Spectroscopic 4 credits (3-0-2)
methods: IR, NMR, optical rotary and circular dichroism. Pre-requisites: BEL204 and EC 90
BEL312 Carbohydrates and Lipids in Immune system. Molecules of immune system –
Biotechnology immunoglobulins, MHCs, Cytokines, T cell receptors.
3 credits (2-1-0) Generation of antibody and T cell receptor diversity.
Pre-requisites: BEL101 and EC 60 Complement system. Humoral and Cell mediated immunity.
Introduction, Molecular Structure of polysaccharides; Immune regulation. Vaccines. Hybridoma. Immunodeficiencies
Enzymes degrading polysaccharides; Physical properties of and AIDS. Transplantation immunity and cancer.
polysaccharides; Production of microbial polysaccharides; BEL413 Modelling and Simulation of
Food usage of exopolysaccharides; Industrial Usage of Bioprocesses
exopolysaccharides; Medical applications of 4 credits (3-0-2)
exopolysaccharides. Molecular structure of lipids; Physical Pre-requisites: BEL301
properties of lipids; oleaginous microorganisms and their Types of kinetic models, Data smoothing and analysis,
principal lipids; Production of microbial lipids; Modification of Mathematical representation of Bioprocesses, Parameter
lipids for commercial application; Extracellular microbial lipids estimation, Numerical Integration techniques, Parameter
and biosurfactants; Micelles and Reverse micelles in biology, Sensitivity analysis, Statistical validity, Discrimination between
Liposomes in drug delivery. two models.
BEL401 Bioprocess Technology Physiological state markers and its use in the formulation
2 credits (2-0-0) of a structured model, Development of compartment and
Pre-requisites: BEL301 metabolic pathway models (Software Probe) for intracellular
Bioprocessing vs. chemical processing. Substrates for state estimation.
60
Biochemical Engineering & Biotechnology
Dynamic Simulation of batch, fed-batch steady and transient memory and molecular imprinting, Biocatalyst design and
culture metabolism, Numerical Optimization of Bioprocesses challenges, cofactor recycling, enzyme stability and
using Mathematical models. stabilization. Biocatalytic applications in organic synthesis-
hydrolytic reactions, oxidation reduction reactions, formation
BEL414 Thermodynamics of Biological
of C-C bond, addition and elimination reactions, glycosyl
Systems
3 credits (3-0-0) transfer reactions, isomerization, halogenation/
Pre-requisites: CHL101 and EC 90 dehalogenation reactions.
Biological systems as open, non-equilibrium systems, failure Laboratory: Use of lipases to demonstrate esterification and
of classical thermodynamics in describing biological interesterification reactions. Effect of solvents on lipase
processes, concepts of thermodynamic flux and force, concept catalyzed reactions, Use of proteases for synthetic reactions.
of entropy production, constitutive equations, Onsager Cofactor recycling. Immobilized biocatalysts for bioconversion.
reciprocal relations, Prigogine’s principle, coupling in biological
processes, thermodynamics of coupled biochemical reactions, BEL420 Analytical Methods in Biotechnology
thermodynamic analysis of oxidative phosphorylation, Nath’s 3 credits (2-0-2)
principle for coupling in bioenergetic processes, active Pre-requisites: BEL101 and EC 90
transport, stability of non-equilibrium states. Nature and properties of biochemical metabolites,
Radioactivity and use of isotopes in biological systems,
BEL415 Advanced Bioprocess Control Autoradiography, Principles and applications of
3 credits (3-0-0) chromatography, Hydrodynamic methods : Sedimentation and
Pre-requisites: CHL202 and EC 90 ultracentrifugation, Spectrophotometry, Fluorescence
The course begins with a detailed analysis of the stability methods, Circular dichroism, Mass spectrometry, Gas
of bioreactors and gradually brings in the general concept of chromatography.
Lyapunov stability. The contrast between classical control and
modern control is illustrated through state space techniques BEL421 Metabolic Regulation and
and concepts of reachability (Controllability) and Engineering
reconstructability (Observability). Then several techniques of 3 credits (3-0-0)
differential are brought and the power of the method Pre-requisites: BEL204 & BEL301
demonstrated through various techniques such as the input- Regulatory mechanisms for control of enzyme synthesis –
output linearization. In the final phase of the course several an overview. Control of enzyme activity-proteolysis, covalent
case studies are undertaken and future trends in the field of modification and ligand binding. Metabolic control theory and
research presented. metabolic flux analysis, and their applications. Metabolic
regulation of a few major metabolic pathways especially those
BEL416 Membrane Applications in
relevant to bioprocess industries. Metabolic pathway synthesis.
Bioprocessing
3 credits (3-0-0) Application of gene cloning in redirecting cellular metabolism
Pre-requisites: BEL301 for over-production of a few industrial products. Strategies to
Introduction; Organic/inorganic membranes and its overcome regulatory mechanisms for hyper production of
manufacture; transport theories for MF/UF/NF membranes; primary and secondary metabolites such as enzymes, amino
Laboratory/ commercial modules of membranes: Applications acids, alcohols, anti-oxidants, organic acids and antibiotics.
of membranes: Milk/ cheese processing, Fruit/ sugarcane juice BEL422 Solid State Cultivation
processing, Pharmaceuticals/ Therapeutic drugs processing 3 credits (3-0-0)
and membrane-coupled separation of biomolecules; Pre-requisites: BEL301
Membrane based bioreactor for cell/enzyme recycle; Definition, Microbial basis of processes, Substrate for
Mammalian/ plant cell culture; Case studies. processes, Quantification of biomass, Environmental
BEL417 Biophysics parameters, Growth patterns, Growth kinetics and the
3 credits (3-0-0) modelling of growth in SSC, General principles of reactor
Pre-requisites: PHL110 and EC 90 design and operation for SSC, Overall process concepts in
Spectroscopic methods in biophysics, conformational fungal biomass production, product leaching and downstream
changes in biological processes, biological energy processing.
conservation and transduction, photosynthesis, transport BEL701 Biotechnology Resource Planning and
across biomembranes, the biophysics of motility, the IPR Issues
biophysics of the nerve impulse. 2 credits (2-0-0)
BEL418 Bioinformatics Pre-requisites: BEL401 & BEL403
3 credits (2-0-2) Economic, social and product benefits of modern
Pre-requisites: CSL110 / CSL120 and EC 90 biotechnology; Resource base for process biotechnology;
Introduction to Bioinformatics and its Application, Molecular Typical stages in commercialization of process/ product;
Biology for bioinformatics (Central Dogma), Biological data Commercial and financial aspects of bioprocessing ; Financial
bases (primary, secondary hybrid etc), and its Annotation, appraisal of bioprocessing projects .
Protein and Nucleotide (DNA) sequencing techniques, TRIPS agreement; IPR issues in relation to biotech products/
Pairwise and multiple sequence alignment algorithm, processes; Architecture of Patent application.
Phylogentic Analysis, Hidden Markov Model (HMM) and its
Application, Microbial Genomics, Metabolic Flux Analysis. Alternative models of technology transfer and licensing;
Good manufacturing practices; Funding mechanisms of
BEL419 Enzyme Catalyzed Organic Synthesis commercial projects.
3 credits (2-0-2)
Pre-requisites: BEL101 and EC 90 Biosafety Principles - environment and health risk
Enzyme as biocatalysts, Enzyme catalyzed reactions in assessment; biosafety regulatory guidelines and controlling
organic solvents, Structure of enzyme in organic solvents, pH agencies, Environmental law for hazardous microorganisms
61
Biochemical Engineering & Biotechnology
and GMOs; Biotechnology Related Issues of Public Concern comparison of reactor performances. Immobilized plant cell
- Bioethics. and cell-retention reactors. Hairy root cultures and their
cultivation.
BEL702 Bioprocess Plant Design
5 credits (3-0-4) Laboratory : Development of callus and suspension
Pre-requisites: AML110 & MEL110 & CHL205 & cultures of plant cells; shear sensitivity; growth and product
CHL204 & BEL401 and EC 90 formation kinetics in suspension cultures; production of
Introduction; General design information; Mass and secondary metabolites in bioreactors using suspension
energy balance; Flow sheeting; Piping and instrumentation; cultures / immobilized cells; development of hairy root
Materials of construction for bioprocess plants; Mechanical cultures.
design of process equipment; Vessels for biotechnology
applications; Design of fermenters; Design considerations for BEL713 Microbial Engineering
maintaining sterility of process streams and processing 3 credits (3-0-0)
equipment; Selection and specification of equipment for Pre-requisites: BEL403
handling fluids and solids; Selection, specification and design Non-ideality and RTD in bioreactors; stability analysis;
of heat and mass transfer equipment used in bioprocess analysis of multiple interacting microbial populations; stability
industries; Design of facilities for cleaning of of recombinant cells; physiology of immobilised cells; special
process equipment used in biochemical industries; reactors for animal and plant cells; integrated systems of
Utilities for biotechnology production plants; Process bioreaction and bioseparation; biosensors.
economics; Bioprocess validation; Safety considerations; Case
studies.
BEL714 Protein Science and Engineering
3 credits (3-0-0)
Laboratory: Design of the complete process plant for an Pre-requisites: BEL204
identified product or service. Each student to choose a Introduction-Definition, Aims; Basic structural principles of
separate product/industry. proteins-amino acids, Motifs of protein structure and their
BEL703 Downstream Processing in packing: alpha domain, alpha/Beta domain, Antiparallel β
Biotechnology structures; Protein folding and assembly – protein folding
5 credits (3-0-4) pathways in prokaryotes and eucaryotes; Folding of BPTI,
Pre-requisites: BEL301 & BEL401 Recovery of active proteins from inclusion bodies; Structure
Characteristics of bio product, flocculation and conditioning prediction-structural classes, secondary and tertiary protein
of fermented medium, Revision of mechanical separation structure prediction; Sequence homology searches, Strategies
(filtration, Centrifugation etc.), cell disruption, Protein for protein engineering – random, site-directed, case studies;
precipitation and its separation, Extraction, Adsorption- X-ray and NMR analysis of proteins-basic principles; Drug-
Desorption processes, Chromatographic methods based on protein interactions and design, Rational protein design.
size, charge, shape, biological affinity etc., Membrane BEL715 Biological Waste Treatment
separations- ultrafiltration and electrodialysis,
4 credits (3-0-2)
Electrophoresis, Crystallization, Drying, Case studies.
Pre-requisites: BEL301
Laboratory: Conventional filtration, centrifugation in batch Qualitative and quantitative characterization of wastes;
and continuous centrifuge, Cell disruption, Protein precipitation Waste disposal norms and regulations; Indian regulations;
and its recovery, Ion-exchange chromatography, Membrane Principles of biological treatment; Aerobic and anaerobic
based filtration- ultrafiltration in cross flow modules and biological wastewater treatment systems; Suspended and
microfiltration, Adsorption processes in batch and continuous attached cell biological wastewater treatment systems;
mode. Biological nutrient removal; Treatment plant design
BEL711 Recombinant DNA Technology calculations; Treatment and disposal of sludges; biological
4 credits (2-0-4) means for stabilization and disposal of solid wastes; Treatment
Pre-requisites: BEL204 of hazardous and toxic wastes; Degradation of xenobiotic
Restriction and modification phenomena, Other enzymes compounds; bioremediation.
used in rDNA research, Plasmid, λ phage, M13 biology, Vectors Laboratory: Characterization of wastes; Design calculations
– plasmid, phage, phagemid, Cosmid, Expression vectors, for various types of wastes using various types of biological
Construction of libraries, DNA Sequencing, PCR, Genome processes.
mapping, Stability of recombinant cells in the production of
biochemicals. BEL716 High Resolution Methods in
Biotechnology
BEL712 Plant Cell Technology 3 credits (2-0-2)
3 credits (2-0-2) Pre-requisites: BEL301
Pre-requisites: BEL301 Need for high resolution separation for biologicals;
Lectures: Special features and organization of plant cells.
Difficulties with traditional methodologies; Affinity precipitation
Totipotency, regeneration of plants. Plant products of
and partitioning; MF/UF/NF for high resolution separation;
industrial importance. Biochemistry of major metabolic
chromatography techniques; Affinity chromatography and
pathways and products. Autotrophic and heterotrophic
electrophoresis, Separation by gene amplification (PCR),
growth. Plant growth regulators and elicitors; Cell
Molecular imprinting.
suspension culture development: methodology, kinetics of
growth and production formation, nutrient optimisation. BEL717 Animal Cell Technology
Production of secondary metabolites by suspension cultures 4 credits (3-0-2)
with a few case studies. Biological and technological Pre-requisites: BEL301
barriers- hydrodynamic shear and its quantification, mixing Characteristic of animal cell, metabolism, regulation and
and impeller design aspects. Plant cell reactors: nutritional requirements; Kinetics of cell growth and product
62
Biochemical Engineering & Biotechnology
formation and effect of shear force; Product and substrate pharmagenomics, Structural and functional genomics, DNA
transport; Perfusion bioreactors, hollow fiber bioreactor, microarrays and expression profiling, protein isolation and
operational strategies and integrated approach; Micro and purification, protein expression – methodologies, proteome
macro carrier culture; Hybridoma technology; Genetic analysis – various techniques, 2D gel elctrophoresis, FPLC,
engineering in animal cell culture; Scale-up and large scale MALDI-TOF etc., Protein structure determination.
operation; Case studies.
BEL723 Data Analysis for DNA Microarrays
Laboratory: Cell culture in static phase (T-flask), 4 credits (3-0-2)
quantification of cell growth, monolayer culture, determination Pre-requisites: BEL204
of critical shear stress, micro carrier and perfusion culture, Microarray technology, Basic digital imaging and image
product formation. processing, Probabilities, common distributions, Bayes’
BEL718 Combinatorial Biotechnology theorem, Analyzing microarray data with classical hypothesis
3 credits (3-0-0) testing, Analysis of variance, Experimental Design, Analysis
Pre-requisites: BEL204 and visualization tools: Box plots, Scatter plots, Histograms,
Introduction, solid phase synthesis, solution phase Cluster Analysis: one-way, two-way, Graphic, Methods for
synthesis. Strategies for library construction. Solid phase selection of differentially regulated genes, Hypothesis- driven
synthesis of peptides and oligonucleotides. Strategies for experiments using focused microarrays, Biological
identification of potent molecules. Indexed combinatorial interpretation, Commercial software available.
library. Combinatorial libraries of various biomolecules. BEL724 Advanced Biochemistry
Instrumentation and analytical methods. 3 credits (3-0-0)
BEL719 Current Topics in Biochemical Pre-requisites: BEL204
Engineering and Biotechnology Overview of carbohydrate and fatty acid metabolism and
3 credits (3-0-0) linkage to Bioenergetics, Biosynthesis of Amino acids,
Pre-requisites: BEL403 Protein Synthesis and Targeting, Protein Degradation and
Topics of current interest in various areas of Biochemical turnover, Enzymatic reaction mechanism and role of transition
Engineering and Biotechnology will be covered. The faculty metal ions, Allosteric transitions and cellular controls, Signal
offering the course will specify the contents at the time of Transduction, Peptide synthesis and peptide sequencing,
offering. Protein folding and stabilization, Molecular chaperones and
neurodegenerative disorders, and Biosynthesis of Lipids and
BEL720 Biotechnology in Food Processing nucleotides.
3 credits (3-0-0)
Pre-requisites: BEL301 BEN150 Introduction to Biochemical
Microbial role in food process operations and production; Engineering and Biotechnology
new protein foods-SCP, mushroom, food yeasts, algal 2 credits (0-0-4)
proteins; fermentation as a method of preparing and Demonstration, audio-visual presentations, and/or hands-
preserving foods. Food additives like colouring, flavours and on experiments about micro-organisms and their
vitamins. Organisms and their use in pickling, producing applications; heredity and genetics; bioinformatics;
colours and flavours, alcoholic beverages and other infrastructural and analytical tools required for biotechnology
products. Mechanism of enzyme functions and reactions in operations and engineering aspects of biochemical and
process techniques-starch and sugar conversion biotechnology products.
processes, baking by amylases, deoxygenation and
desugaring by glucoses oxidase, beer mashing and chill- BEP303 Design of Bioprocesses
proofing cheese making by proteases and various other 2.5 credits (0-1-3)
enzyme catalytic actions in food processing. Process wastes- Pre-requisites: BEL101 & BEL103 and EC 60
whey, molasses, starch substrates and other food wastes Design and execution of simple laboratory scale
for bioconversion to useful products, Genetically Modified experiments on the following topics: Estimation of cell mass;
Food. different phases of microbial growth; Mass and energy
balance in a typical bioconversion process; Concept of
BEL721 Bionanotechnology limiting nutrient and its effect on cell growth; growth inhibition
3 credits (3-0-0) kinetics; product formation kinetics in a fermentation
Pre-requisites: BEL101 and EC 60 process; aerobic and anaerobic bioconversion process;
Introduction; Scanning probe microscopy (SPM), Self- power consumption in a fermentation process and its
assembly of biomolecules in nanotechnology; Tailoring correlation with rheology of the fermentation fluid; different
nanometer scale objects to mimic and interact with natural agitator types; mixing time in a bioreactor; quantification of
materials; Biological nanostructures and biomimetic KLa in a fermentation process; Heat balance across a batch
machinery; Molecular motors: natural molecular motors like
sterilization process; Assembly and characterization of pH/
kinesin, dynein, flagella, RNA and DNA helicases,
DO electrodes.
topoisomerases; Ion channels as molecular switches; patch
clamp technique; Photoreceptors as single photon optical BER350 Professional Practices (BB)
detector; Manipulating redox systems application in 2 credits (0-1-2)
nanotechnology; Microfabricated devices in biotechnology Pre-requisites: EC 60
e.g. micro reactors; Protein array technology; Exploiting No fixed course content. Activities to include visits to
enzymes in bionanotechnology; Nanoscale devices for industry, interactive meetings with personnel from industry
biosensors, Biodegradable nanoparticles for drug and gene and R&D organizations.
delivery to cells and tissues.
BES350 Independent Study (BB)
BEL722 Genomics and Proteomics 3 credits (0-3-0)
3 credits (3-0-0) Pre-requisites: EC 80
Pre-requisites: BEL204 No fixed course content. Study to concentrate on a selected
Genomics and proteomics- introduction, DNA sequencing, topic under the supervision of a faculty member of the
DNA fingerprinting, ESTs and SNPs, Application in department.
63
Biochemical Engineering & Biotechnology
64
Department of Chemical Engineering
CHC410 Colloquium (CH) Experimental Projects: Collect and data and model the
3 credits (0-3-0) experimental work.
Pre-requisites: registered for CHT410 and EC 90
CHD853 Major Project Part 1 (CC)
One hour lecture by each student on his practical training.
4 credits (0-0-8)
Circulation of a ten page notes on his lecture. Some special
Pre-requisites: EC 165
assignment on his training.
Overlaps with: CHD851
CHC750 Seminar (CC) Formulation of the problem Literature search; Design of the
1 credit (0-0-2) experimental setup and study of experimental techniques in
Pre-requisites: EC 165 the case of experimental projects; Formulation of design
Literature study on a selected topic. Report writing. Seminar equations in development of solution techniques and
presentations. familiarization with relevant software in the case of design or
theoretical projects.
CHC760 Seminar (CP)
1 credit (0-0-2) CHD854 Major Project Part 2 (CC)
Pre-requisites: EC 165 16 credits (0-0-32)
Literature study on a selected topic. Report writing. Seminar Pre-requisites: CHD853
presentations. Overlaps with: CHD852
Theoretical or design projects: To arrive at a complete design
CHD310 Mini Project (CH)
of a chemical plant in particular give complete design detail of
3 credits (0-0-6)
major process equipment or to develop computer simulation
Pre-requisites: EC 60
models for industrial processes at macro or micro level.
Design/fabrication work under the guidance of a faculty
member. Prior to registration, a detailed plan of work should Experimental Projects: Collect and data and model the
be submitted by the student to the Head of Department for experimental work.
approval.
CHD861 Major Project Part 1 (CP)
CHD411 Major Project Part 1 (CH) 6 credits (0-0-12)
4 credits (0-0-8) Pre-requisites: EC 165
Pre-requisites: EC 120 Overlaps with: CHD863
Formulation of the problem; Literature search; Design of Formulation of the problem; Literature search; Design of
the experimental setup and study of experimental techniques the experimental setup and study of experimental techniques
in the case of experimental projects; Formulation of design in the case of experimental projects; Formulation of design
equations, development of solution techniques and equations in development of solution techniques and
familiarization with relevant software in the case of design or familiarization with relevant software in the case of design or
theoretical projects. theoretical projects.
CHD412 Major Project Part 2 (CH) CHD862 Major Project Part 2 (CP)
6 credits (0-0-12) 14 credits (0-0-28)
Pre-requisites: CHD411 Pre-requisites: CHD861
Theoretical or design projects: To arrive at a complete design Overlaps with: CHD864
of a chemical plant in particular give complete design detail of Theoretical or design projects: To arrive at a complete design
major process equipment or to develop computer simulation of a chemical plant in particular give complete design detail of
models for industrial processes at macro or micro level. major process equipment or to develop computer simulation
models for industrial processes at macro or micro level.
Experimental Projects: Collect and interact data and model
the experimental system. Experimental Projects: Collect and data and model the
experimental work.
CHD851 Major Project Part 1 (CC)
6 credits (0-0-12) CHD863 Major Project Part 1 (CP)
Pre-requisites: EC 165 4 credits (0-0-8)
Overlaps with: CHD853 Pre-requisites: EC 165
Formulation of the problem; Literature search; Design of Overlaps with: CHD861
the experimental setup and study of experimental techniques Formulation of the problem; Literature search; Design of
in the case of experimental projects; Formulation of design the experimental setup and study of experimental techniques
equations in development of solution techniques and in the case of experimental projects; Formulation of design
familiarization with relevant software in the case of design or equations in development of solution techniques and
theoretical projects. familiarization with relevant software in the case of design or
theoretical projects.
CHD852 Major Project Part 2 (CC)
14 credits (0-0-28) CHD864 Major Project Part 2 (CP)
Pre-requisites: CHD851 16 credits (0-0-32)
Overlaps with: CHD854 Pre-requisites: CHD863
Theoretical or design projects: To arrive at a complete design Overlaps with: CHD862
of a chemical plant in particular give complete design detail of Theoretical or design projects: To arrive at a complete design
major process equipment or to develop computer simulation of a chemical plant in particular give complete design detail of
models for industrial processes at macro or micro level. major process equipment or to develop computer simulation
65
Chemical Engineering
models for industrial processes at macro or micro level. other products. Food processing and agro based products
like paper, sugar, oils and soap etc. including the manufacture
Experimental Projects: Collect and data and model the
of ethyl alcohol. Electrochemicals and chloralkali industries.
experimental work.
Safety and Hazard in chemical process plant design and
CHL101 Introduction to Chemical environmental constraints. Concept of green technologies.
Engineering Thermodynamics CHL121 Chemical Engineering
3 credits (2-1-0) Thermodynamics
Overlaps with: CHL121 4 credits (3-1-0)
Simplified mechanical structure of solids, liquids and gases; Overlaps with: CHL101
Origin of‘ intermolecular forces and non-ideal behaviour of Basic concepts – force, energy, heat, work etc.; closed and
gases; Cp, Cv and equations of state; Generalized properties; open systems; First law for closed and open (flow) systems;
First law and energy balances as applied to thermochemistry Heat effects; Second law and entropy; Second law for flow
and fluid flow. Work in compression and expansion of fluid systems and lost work. Thermodynamic relations –
flow; Second law, concept of irreversibility; Introduction to fundamental property relations and Mazwell’s relations; PVT
phase and chemical equilibria; partial molar properties. behaviour of pure substances; Equations of state generalized
CHL103 Chemical Reactor Analysis and correlations, acentric factor; Calculation of thermodynamic
Design properties using these; Heat engine, Carnot and other cycles;
4 credits (3-1-0) Refrigeration cycles; General Vapor Liquid Equilibrium (VLE)
Overlaps with: CHL122 behaviour, equilibrium criterion and Raoult’s law; Partial molar
Basic introduction to reaction engineering; Introduction to quantities, excess properties, chemical potential, fugacity and
rate equations, stoichiometry and rate laws for biochemical activity coefficients; VLE calculations – Bubble point, Dew point
reactions; Design of batch, plug flow, well mixed and semi- and Flash calculations. Chemical reaction equilibrium and
batch biochemical reactors; Introduction to pseudo steady state equilibrium constants; single and multi-reaction equilibria.
hypothesis and transition state theory; Michaelis – Menten CHL122 Chemical Reaction Engineering – I
equation and identification of its parameters; Multiple enzyme 4 credits (3-1-0)
and substrate systems; Design equations for bio-reactors; Overlaps with: CHL103
Inhibitors and Propagators for biochemical reactions; Introduction to reaction engineering; Concepts of rate
Residence time Distribution; Diffusion with chemical reaction equations, stoichiometry and rate laws; Material balance for
in catalyst particles, effectiveness factors; Scale up of CSTR and PFR, their use for kinetic interpretation and design;
bioreactors; Treatment of unsteady state and non-isothermal Comparison of batch reactor, CSTR and PFR; Evaluation of
conditions for catalysed/uncatalysed biochemical reactions. performance properties of the reactors; Analysis of rate data
CHL110 Transport Phenomena for batch/continuous flow reactors and development of rate
4 credits (3-1-0) equation; Introduction to the concept of yield and selectivity
Definition of transport properties, their measurement and for multiple reactions; Unsteady state reactor design; Concepts
estimation. Shell balance approach for developing equations of adiabatic and non-isothermal operations (energy balance).
for momentum, heat and mass transport. Solution of problems CHL133 Powder Processing and Technology
involving transport in one dimension. Introduction to turbulent 4 credits (3-1-0)
flows and expressions for turbulent fluxes. Concept of transfer Powder characterization for size, size distribution, surface
coefficients. Similarity of momentum, heat and mass transport area and flowability. Size distribution and material handling
and various analogies. Application of these concepts to various equipment performance, powder strength and flowability.
disciplines in engineering and science. Shape characterization. Instruments for measurement of
powder characteristics. Powder storage in silos. Flow
CHL111 Material and Energy Balance
properties of powders. Air induced segregation, segregation
4 credits (2-2-0) during heap formation and flow through chutes. Measurement
Mathematical and engineering calculations, Dimensional
of flow factor and silo design. Analysis methods for flow through
groups and constants, , Behaviour of ideal gases, gaseous chutes, cyclones, etc. Retrofitting. Comminution. Grinding
mixtures, Vapour pressure, Clausius Clapeyron equation, Cox process and circuit analysis. Gas solid separation and
chart, During’s plot, Raoult’s law, Humidity and saturation, equipment like cyclone collectors and bag house scrubbers.
humid heat, humid volume, dew point, humidity chart and its Application of cyclone in waste heat recovery. Energy saving
use, Crystallisation, dissolution, Material balance; solving through pollution control.
material balance problems with and without simultaneous
equations; recycle, bypass and purge calculations, Aid of CHL202 Process Systems Analysis and
computer in solving material balance problems, Energy Control
balance: heat capacity, calculation of enthalpy changes; energy 4 credits (3-1-0)
balances with chemical reaction, Heat of vaporization, heat of Pre-requisites: MAL110
formation, laws of thermochemistry, heat of combination, heat Overlaps with: CHL261
of reaction, Solution of sets of equations, Case studies. Revision of Laplace transform; Dynamic behaviour of first
order and second order systems: response of first order
CHL112 Chemical Process Technology systems, response of first order systems in series, second
4 credits (3-1-0) order systems and transportation lag, block diagrams and
The course covers the concept of combination of unit transfer functions; Feedback Control: P, PI, PID controllers,
processes and unit operations along with the basic raw transient response of control systems: Stability: general
materials. Synthesis of steady state flow sheets for the concepts, Routh stability criterion, direct substitution method;
chemical plant. Processing of water for various end uses. Frequency response: Bode diagrams, Nyquist diagrams,
Industrial gases and different techniques for air separation control system design by frequency response, tuning and
systems. Manufacture of Fertilizers including sulfuric acid; troubleshooting; feedforward control, ratio control, cascade
ammonia and its allied products like, Urea, Nitric acid and control; Introduction to modern control theory.
66
Chemical Engineering
67
Chemical Engineering
control, Industrial hygiene, Reliability and risk analysis, CHL332 Fluidization Engineering
HAZOP and HAZAN, Consequence analysis (vapour cloud 4 credits (3-1-0)
modelling), Event probability and failure frequency analysis, Pre-requisites: CHL231
Safety Training, Emergency planning and disaster Fluidization, Classification of particles, regimes of
management, Case studies. fluidization, minimum fluidization velocity, Particulate and
aggregative fluidization, bubbling fluidization, bubbling bed
CHL277 Materials of Construction
3 credits (3-0-0) models for catalytic reactions, turbulent and fast fluidization,
Pre-requisites: CHL112 dilute and dens phase transport, cyclones, stand pipes,
Types and mechanism of corrosion, factors influencing circulating fluidized beds, spouted beds, three phase
corrosion, combating corrosion, corrosion testing methods, fluidization, performance modelling of multiphase systems.
Metallic materials, Non-metals, High and low temperature Laboratory/design acivities could also be included.
materials, Selection of materials of construction for handling
different chemicals, Industrial applications and case studies. CHL351 Mass Transfer Operations
4 credits (3-1-0)
CHL291 Introduction to Biochemical Pre-requisites: CHL251
Engineering Overlaps with: CHL203
4 credits (3-1-0) Distillation: Raoult’s law, ideal solutions, x-y and H-x-y
Pre-requisites: CHL112 diagrams, flash vaporization and condensation, Differential
Overlaps with: BEL301 distillation, steam distillation, Binary distillation: McCabe-Thicle
Basics of microbiology and biochemistry. Mass and energy and Ponchon-Savarit Method, Total reflux, minimum and
balance in microbial processes. Microbial growth, substrate optimum reflux ratios, Design of distillation column with open
utilization and product formation kinetics. Medium and air steam, multiple feeds, side streams and partial condensers,
sterilization. Enzyme kinetics and immobilized enzyme Approximate and plate to plate calculations for multicomponent
systems. Design of batch, continuous and fed-batch distillation, Liquid-liquid extraction, Extraction equipment
bioreactors. Mass Transfer in biological reactors. Scale-up Design, Equilibrium diagram, Choice of solvent, Single stage
principles, Instrumentation and control of bioprocesses, and multistage counter current extraction with/without reflux,
Bioseparation. Continuous contact extractors, Leaching equipment and
CHL296 Nano Engineering of Soft Materials equilibrium, Single stage and multistage cross current and
3 credits (3-0-0) counter-current leaching, Adsorption: adsorption equilibria,
Pre-requisites: CHL110 adsorption column sizing.
The course can be subdivided in three subheadings viz.,
CHL353 Modern Separation Processes
Soft materials, Intermolecular forces, Surface Instabilities in
4 credits (3-1-0)
soft materials
Pre-requisites: CHL251
Soft materials: soft materials and their properties, ways to Membrane separation processes, Pressure swing
control and measure the properties of soft materials. adsorption, Foam separation, Chromatographic techniques:
Column chromatography, Gas-liquid chromatography, Ion-
Intermolecular forces: van der Waals, Acid-Base, Double
exchange chromatography, Separation by thermal diffusion,
layer and other forces, their decay behavior and measurement
Electrophoresis, Crystallization. Laboratory/design activities
Surface instabilities: Conditions for onset of surface could also be included.
instability; Morphological changes during evolution of
instability. Ways to tune this evolution to result in desired CHL390 Process Utilities and Pipeline Design
morphology. 4 credits (3-0-2)
Pre-requisites: CHL231&CHL251
CHL331 Fluid-particle Mechanics Steam systems: sizing and pressure drop, water hammer,
4 credits (3-1-0) steam trap, flash tank design, lagging, scale formation. Water
Pre-requisites: CHL231 treatment. Air systems: vessels, air cleaning and
Overlaps with: CHL204 dehumidification, air filters, compressors, blowers and piping.
Size and size distribution: size distribution equations and Refrigeration and air conditioning basics. Instrumentation and
their uses. Shape characterization, fractals and fourier feed back control systems. Energy auditing for steam and air
analysis. Method of measurements, image processing. systems. Solar energy applications for utilities.
Instrumental method for measurement of powder size and
distribution, microscope, sieve analysis. Settling of single CHL392 Polymer Science and Engineering
particle and multiple particles, application for size analysis 4 credits (3-1-0)
of particles and design of settling tank. Pressure, vacuum Pre-requisites: CHL221
and ultra filtrations. Flow through packed and fluidized beds. Overlaps with: CYL230
Application of Kozney Carman equation for development of Classification of polymers. Thermosets and thermoplastics.
surface area meter and evaluate bag filter performance. Physical states and transition. Glass transition and its
Powder storage in Silos. Flow properties of powders. Jensen measurements. Crystallization and measurement of
equation Funnel and mass flow. Retrofitting with inserts and crystallinity. Polymer synthesis step growth polymerization with
bin serts. Comminution. The selection of Comminution examples: chain growth including free radical, anionic and
equipment. Grinding circuit analysis. Various methods of cationic polymerization with examples: chain growth including
production of particles, nano particles and their importance. free radical, anionic and cationic polymerization. Polymer
Gas solid separation: Settling chambers, cyclone collectors. kinetics, molecular weight and its distribution. Copolymers and
bag house scrubbers, Electrostatic separators, scrubbers copolymerization. Polymerization systems including bulk,
and other filtration techniques. Laboratory design activities solution, suspension and emulsion. Rubber elasticity. Flow
could be also included. of polymers. Techniques for processing of polymers.
68
Chemical Engineering
Properties of commodity and engineering polymers. End systems, Column processes, Chromatographic separation
application. Polymer based industries. processes, Pressure swing adsorption, Structure and
properties of ion exchange resins, Ion-exchange equilibrium,
CHL471 Process Equipment Design and
Ion-exchange kinetics, Ion-exchange columns, Behaviour of
Economics
ion-exchanges in non-aqueous and mixed solvents.
4.5 credits (3-0-3)
Pre-requisites: CHL351 CHL710 Process Dynamics and Control
Heat Exchange Equipment: rating of an existing unit and 5 credits (3-1-2)
design of a new system of shell and tube heat exchangers; Pre-requisites: CHL261
design of multiple-effect evaporator. Advanced control schemes such as split range control,
selective control, inferential control, model based control,
Mass Exchange Equipment: design of a sieve-tray tower
control of inverse response systems, dead time compensation.
for distillation; design of a packed tower for gas absorption.
Z-transform and sampled data control systems. State space
Plant Economics: estimation of various costs to install and approach to control system design, controllability and
run a plant; interest costs and present/future worth of cash observability. Control of complete chemical plants.
flows; straight-line and combination methods for depreciation;
discounted cost flow/net present worth methods for profitability CHL711 Numerical Methods in Chemical
analysis. Engineering
4 credits (3-0-2)
CHL701 Process Engineering Pre-requisites: (CSL101/CSL102) & MAL110 and
4 credits (3-0-2) EC 90
Pre-requisites: CHL112 & CHL351 Efficient and recent numerical techniques applied to
Process Synthesis; Hierarchical conceptual design of problems of chemical engineering interests. Solution of linear
process; Batch vs. continuous; input-output structure of and non-linear simultaneous algebraic equations, Interpolation,
flowsheet; choice of reactor; choice of separation system; extrapolation and finite difference, Numerical integration and
Distillation column sequencing; Heat exchanger network differentiation, coupled ordinary differential and partial
design; Pinch technology; Utility selection; Steam and cooling differential equations, curve fitting, spline, regression analyses,
water circuits. molecular simulation.
Process economics: Cost estimation; annuities; perpetuities CHL712 Computer Aided Design in Chemical
and present value; Tax and depreciation; Profitability Engineering
measures; comparison of equipments and projects; NPV and 3 credits (2-0-2)
DCFROR, Risk management. Pre-requisites: CHL351
Introductory Optimization: Linear programming and its use Software development for design of various chemical
in process industry; transportation problems; integer equipments. Design of minimum energy heat exchanger
programming (branch and bound method); use of commercial network, sequencing and energy integration in distillation
softwares LINDO, CPLEX. column simulation of process flow sheets using software
package, Aspen Plus.
Second Law Analysis: Estimate of inefficiency in equipment/
process by finding lost work’ modification of operating CHL714 Advanced Heat Transfer
conditions/process to improve efficiency. 3 credits (3-0-0)
Pre-requisites: CHL251 & MAL260
CHL702 Plant Design Unsteady state conduction; numerical and analytical
4 credits (3-0-2) solution. Radiation leading to furnace design. Special topics
Pre-requisites: CHL471 in heat transfer: heat transfer in fixed beds, fluidised beds,
Plant layout, Flow sheeting, Auxiliaries, Cost estimation, magneto fluid dynamic systems. Transpiration cooling in non-
Materials handling, offsite facilities, Selection and detailed Newtonian fluids. Heat pipes, solar collectors.
design of equipments e.g Pumps, Blowers and compressors,
Mixers, Conveyors etc.; Selection of valves, Pressure reducing CHL717 Mechanical Design of Process
valves and fittings; Water treatment, Storage; Steam: Steam Equipment
handling ,Steam Trap, Ejectors etc.; Pipe Size and pressure 4 credits (3-0-2)
drop calculation for single and two phase flow, multiple pipe Pre-requisites: CHL471
line networking. Specification and design of simple structural members;
Design of spherical/ cylindrical shells and heads/ closures
CHL705 Electrokinetic Transport Phenomena for cylindrical shells under internal and external pressure;
4 credits (3-0-2) Design of a self- supporting tall vertical cylindrical vessel under
Pre-requisites: CHL331 wind/ seismic loading; Design of RCC foundation for a tall
Definition of colloidal state and implications, intermolecular vessel; Compensation for openings in cylindrical shells; Design
and surface forces, electrostatics, transport equations in of special flanges; Design of storage tanks for liquids.
electrolytic solution, electrokinetic phenomena,
electrophoresis, sedimentation potential, coagulation of Laboratory/ design activities could also be included.
particles, Particle deposition and aggregation.
CHL723 Chemical Reaction and Reactor
CHL707 Adsorption Separation Processes Engineering
3 credits (3-0-0) 3 credits (3-0-0)
Pre-requisites: CHL351 Pre-requisites: CHL351 & CHL221
Microporous adsorbents, Physical adsorption and Theory of mass transfer with chemical reaction. Regimes
characterization of porous adsorbents, Adsorption equilibria, of absorption for a (1,1) order irreversible reaction and their
Diffusion in porous media, kinetics of adsorption in batch identification. Enhancement factor, Extension to (m,n) order
69
Chemical Engineering
case. Design of ideal gas-liquid reactors. Enhancement higher Hydrocarbons. Synthetic Gas Chemicals. Polymers
factor for reversible and other complex reaction schemes. from Olefins. Petroleum Aromatics. Synthetic Fibers, Rubber,
Heat effects in gas-absorption. Absorption accompanied by Plastics and Synthetic Detergents. Energy conservation in
gas-desorption. Prediction of gas-liquid reactor parameters. petrochemical Industries. Pollution control in Petrochemical
Introduction to liquid-liquid and gas-liquid-solid reactor design. Industries. New Trends in petrochemical Industry.
CHL724 Environmental Engineering and CHL751 Multi-component Mass Transfer
Waste Management 3 credits (3-0-0)
4 credits (3-1-0) Pre-requisites: CHL351
Pre-requisites: CHL291 Diffusion: Maxwell-Stefan’s, Fick’s and Irreversible
The course covers the concept of ecological balance and Thermodynamics approaches to multicomponent diffusion.
the contribution of industrial and human activities in the Estimation of multicomponent Diffusion Coefficients. Effect of
changes in environmental quality. The ecological cycles. nonideality of fluids, Linearized theory for multicomponent
Concept of pollutants and regulatory measures for the diffusion problems. Interphase mass transfer: mass transfer
maintenance of air and water quality. The course also covers coefficients, bootstrap matrix, Film Theory, Surface renewal
the air pollution its source and dependence on the models, mass transfer in turbulent flows.
atmospheric factors like wind velocity, temperature gradient
etc., concept of atmospheric stability and its relationship Laboratory/design activities could also be included.
with dispersion of pollutants. Models for the prediction of air CHL761 Chemical Engineering Mathematics
quality. Health effects of various pollutants. Control of 3 credits (3-0-0)
emission of pollutants including the design of particulate Pre-requisites: MAL110 and EC 90
matter separation by multicyclone systems, ESP, bag filters, (laboratory/design activities could also be included)
scrubber and cleaning of gaseous components by wet
scrubber, adsorption by activated carbon etc. Data Analysis: Classification, estimation and propagation
of errors, Presentation of data, Statistical methods, sample
Water pollution its cause and effects. Pollutants and its and population distributions, testing of hypothesis, analysis of
dispersion in water bodies to predict water quality through variance.
modelling. Concept of inorganic and organic wastes and
definition of BODs and COD. Solution of equations: Vector spaces, basis, matrices and
differential operators. Eigen values, vectors and functions.
CHL727 Heterogeneous Catalysis and Solvability conditions for linear equations, Sturm-Louiville
Catalytic Reactors Theory, Separation of variables and Fourier transform,
4 credits (3-0-2) Frobenius method for ordinary differential equations, Greens
Pre-requisites: CHL221 Function and its application.
concepts in heterogeneous catalysis, catalyst preparation
and characterization, poisoning and regeneration. CHL762 Modelling, Simulation and Control
Industrially important catalysts and processes such as 4 credits (3-0-2)
oxidation, processing of petroleum and hydrocarbons, Pre-requisites: CHL351&CHL221&CHL261
synthesis gas and related processes, commercial reactors Development of conservation and constitutive equations for
(adiabatic, fluidized bed, trickle-bed, slurry, etc.). Heat and a variety of chemical engineering unit operations and
mass transfer and its role in heterogeneous catalysis. processes under steady state and unsteady state conditions,
Calculations of effective diffusivity and thermal conductivity their analysis and solution. Concept of lumped and distributed
of porous catalysts. Reactor modelling . Emphasizes the parameter models. Introduction to steady state and dynamic
chemistry and engineering aspects of catalytic processes simulation software. Study of plant wide control schemes.
along with problems arising in industry. Catalyst deactivation CHL763 Computer Process Control
kinetics and modelling. 3 credits (3-0-0)
CHL735 Design of Separation Processes Pre-requisites: MEL432/EEL308/CSL211
4 credits (3-0-2) 16 bit microprocessor architecture, overview of IBM PC to
Pre-requisites: CHL351 Pentium Computer, Computer- Process Interface equipment,
Over-view of multi-component distillation: short comings DDC, Distributed Process Control, Supervisory Control, PLC,
and challenges, new technologies – adsorption, membrane, Fuzzy Logic and Neural Networks, Applications in Control of
crystallization. Separation processes based on micro- Chemical Processes.
emulsion, micro-gas bubble, electrical charges. Design of CHL766 Interfacial Engineering
such processes with special emphases on separation 3 credits (3-0-0)
technology in petroleum refinery and petro-chemicals. Pre-requisites: CHL351&CHL110&CHL121
CHL743 Petrochemical Technology Concept and definition of interface. Physical surfaces.
3 credits (3-0-0) Surface chemistry and physics of colloids, thin films,
Pre-requisites: CHL221 dispersions, emulsions, foams, polyaphrons. Interfacial
Introduction : Composition of petroleum, laboratory tests, processes such as crystallization, epitaxy, froth flotation,
refinery products, characterization of crude oil. Indian adsorption, adsorptive bubble separation, catalysis,
Petrochemical Industries ; A review. Feed stocks for reaction-injection moulding, microencapsulation. Industrial
petrochemical Industries and their sources. A brief aspects of interfacial engineering.
introduction to Catalytic cracking ,Catalytic reforming, Delayed CHL768 Fundamentals of Computational Fluid
coking Hydrogenation and Hydro cracking, Isomerization, Dynamics
Alkylation and Polymerization. Purification of gases. 3 credits (2-0-2)
Separation of aromatics by various Techniques. Pre-requisites: CHL331
Petrochemicals from Methane. Petrochemicals from Ethane Overlaps with: AML811
– Ethylene – Acetylene. Petrochemicals from C3, C4 and Review of basic fluid mechanics and the governing
70
Chemical Engineering
(Navier-Stokes) equations; Techniques for solution of PDEs Representation of distribution, Properties of distributions,
– finite difference method, finite element method and finite Particle phase space, Population fluxes distributions, Particle
volume method; Finite volume (FV) method in one- phase space, Population fluxes-convections, Birth and
dimension; Differencing schemes; Steady and unsteady death, Particle number continuity equation, Population
calculations; Boundary conditions; FV discretization in two balance over a macroscopic external coordinate region,
and three dimensions; SIMPLE algorithm and flow field Moment transformation of population balance over a
calculations; variants of SIMPLE. Turbulence and turbulence macroscopic external coordinate region, Macro-moment
modelling; illustrative flow computations; Commercial equations, Recovery of particle size distribution function,
softwares FLUENT and CFX – grid generation, flow Steady state MSMPR crystalliser, Significance of distribution
prediction and post-processing. representation, Exponential distribution, Mass Balance,
Dynamic population balance, CSD transients, Transient
CHL773 Planning of Experiments and Analysis
moment equations, Transient size distribution by method of
of Engineering Data
characteristics, Stability of CSD, Crystallisation kinetics,
4 credits (3-0-2)
Nucleation, Crystal growth, Comminuton Processes,
Pre-requisites: CHL331 Microbial population, Residence-time distribution,
Graphical methods and plots. Three variable empirical Dispersed-phase mixing.
equations. Multivariable empirical equation. Dimensionless
numbers. Nomography. Logarithmic charts. Emperical CHL813 Thermodynamics and Process Design
equations for data fitting. Testing of hyposthesis, mean and 3 credits (2-0-2)
variances. Planning of experiments as per factorial design to Pre-requisites: CHL701
estimated significant variables. Fractional factorial design to Thermophysical properties of pure fluids, Equilibrium
use significant variables to estimates the relationship between properties such as vapour pressure, latent heats, critical
the significant variables and independent variable. Response constants and PVT behaviour, Transport properties such as
surface analysis by reducing the equations developed to viscosity, thermal conductivity and diffusivity, estimation and
canonic equations. Estimations of parameters in equations of correlation methods, Properties of multicomponent systems,
second order with interaction factor. Case studies on V-L-E using equations of state and group contribution methods,
application to research and industrial data analysis. L-L-E correlation and prediction, Homogeneous and
heterogeneous chemical equilibria with competing chemical
CHL774 Process Optimization reactions.
4 credits (3-0-2)
Pre-requisites: CHL221& CHL471 CHL830 Advanced Computational Techniques
Formulation of an optimization problem, Convexity Analysis, in Chemical Engineering
Linear Programming, Nonlinear Programming, Optimality 3 credits (2-0-2)
Conditions, Dynamic Optimization, Dynamic Programming, Pre-requisites: CHL711
Introduction to Mixed Integer Programming. Laboratory/design Introduction, Review of fundamental conservation equations
activities could also be included. for momentum, heat and mass transport. Formulation of
problems in steady state. Weighted residual methods:
CHL793 Membrane Science and Engineering orthogonal collocation, Galerkin finite element, Fourier
3 credits (3-0-0) collocation. Application to reaction-diffusion in porous catalysts
Pre-requisites: CHL110 & CHL351 pellets. The non-isothermal situation. Calculation of
Introduction to membrane separation processes, their effectiveness factor. Application in micro-fluid mechanics-
classification, and applications. General transport theories particle capture efficiency in suspension flows. Moving
including theory of irreversible thermodynamics for boundary problems. Transient problems leading to PDEs.
multicomponent systems. Examples in heat and mass transfer and their numerical
Membrane preparation techniques. Design and analysis and solution. The MonteCarlo method and its diverse applications.
industrial application of various membrane processes such Computational laboratory exercises.
as reverse osmosis, ultrafiltration electrodialysis, dialysis, CHL864 Applications of AI and ANN in
liquid membrane separation, gas permeation and Chemical Engineering
pervaporation. 4 credits (3-0-2)
CHL794 Petroleum Refinery Engineering Pre-requisites: EEL758
4 credits (3-0-2) AI and Chemical Engineering, Expert System and Chemical
Pre-requisites: CHL351 Engineering-CONPHYDE and OPS5, KBS for Process
Introduction : Composition of petroleum, laboratory tests, Synthesis and Design, Design problem solving (Exsep),
refinery products, characterization of crude oil. Design of Product design methodologies – polymeric composites,
crude oil distillation column. Catalytic cracking. Catalytic molecules, developing design support environment, Process
reforming. Delayed coking. Furnace design. Hydrogenation plant diagnosis and safety analysis (Falcon), Expert system
and Hydrocracking. Isomerization, Alkylation and tools and shells for Chemical Engineering – critical evaluation
Polymerization. Lube oil manufacturig. Energy conservation of KBES tools such as KEE, ART, INSIGHT2 +, NEXPERT,
in petroleum refineries. New Trends in petroleum refinery etc. from the perspective of Chemical Engineers.
operations. Pyrolysis of Naphtha and light hydrocarbons: CHL869 Applications of Computational Fluid
modelling (time permitting). Dynamics
CHL807 Population Balance Modelling 3 credits (2-0-2)
3 credits (3-0-0) Pre-requisites: CHL768
Pre-requisites: CHL761 Brief review of CFD for single phase flows; Solution of scalar
Particle size distribution, Crystal size distribution, equations – heat and mass transfer; Application to heat
Comminution processes and other particulate processes, exchanger and stirred tank flows; CFD for multiphase systems
71
Chemical Engineering
72
Department of Chemistry
CYL110 Physical Chemistry: Concepts and CYL230 Polymer Chemistry
Applications 3 credits (2-1-0)
4 credits (3-1-0) Pre-requisites: CYL120
(i) Chemical thermodynamics – Free energy and entropy Classification of polymers, Molecular weights, Chemical
changes in chemical processes, Phase rule and phase structure and morphology, Kinetics and mechanism of chain
equilibria, Equilibrium electrochemistry. (ii) Quantum growth and step growth polymerisation. Fibre forming
mechanical principles of structure and bonding in molecules polymers. Epoxy and Phenolic Resins. Copolymerization,
techniques of polymerization. Stereoregular polymerization.
and thermodynamic connection. (iii) Chemical dynamics –
Reaction rates, Homogeneous and heterogeneous catalysis. CYL250 Special Topics in Organic Chemistry
4 credits (3-1-0)
CYL120 Inorganic and Organic Chemistry: Pre-requisites: CYL120
Concepts and Applications Structure - activity relationships in simple organic
4 credits (3-1-0) molecules. Strategies for carbon-carbon bond formation.
Inorganic Chemistry: Dienes, Polyenes and Pericyclic reactivity. Free radical
(i) Transition metal complexes: Crystal field theory, basic reactions. Heterocyclic chemistry, Organometallic chemistry,
concepts, crystal field effects in linear (ML2), Natural Product chemistry: Carbohydrates, Nucleic Acids,
Lipids, Aminoacids and Proteins.
tetrahedral, square planar (ML4) and octahedral
geometry (ML6), pairing energies, weak field and strong CYL330 Chemistry of High Temperature
field case, crystal field stabilization energy, factors Materials
affecting magnitude of 10Dq, high and low spin 4 credits (3-1-0)
complexes, evidences for crystal field stabilization, Pre-requisites: CYL120 and EC 60
tetragonal distortions from octahedral geometry, Synthesis of molecular, non-molecular and composite
electronic spectra and magnetism. materials. Physico-chemical characterization of materials;
structure-property relationship among materials; Application
(ii) Organometallics: EAN rule, metal carbonyls – in refractory catalysis, sensors, semiconductors and
synthesis, bonding and structure, metallocenes – superconductors.
synthesis and properties, Homogeneous and
heterogeneous catalysis. CYL340 Supramolecular Chemistry
4 credits (3-1-0)
(iii)Bioinorganic chemistry: Metalloporphyrins, Pre-requisites: CYL120 and EC 60
metalloproteins, hemoglobin and myoglobin – Chemistry beyond the molecule. Supramolecular,
structure and function. chemical and biochemical recognition, biomodels, molecular
(iv)Inorganic solids: Structures and applications. Layered organization and aggregation, organized media and its use
solids, Zeolites, magnetic and electronic properties of in developing new technologies. Host guest chemistry with
inorganic solids. cations and anions, clatherates, liquid crystals, use of weak
interaction-weak bonds for obtaining new materials and
Organic Chemistry: molecular catalysis, membrane mimetic chemistry and
(i) Structure and Stereoisomerism: Conjugation and technologies, purpose linked molecular design and devices.
aromaticity, stereoisomerism, structural representation CYL410 Computational Methods and Analysis
of stereoisomers, IUPAC conventions for optical and 3 credits (3-0-0)
geometrical isomers. Conformations and Pre-requisites: CYL110 and EC 90
conformational analysis - linear and cyclic compounds. Structure, dynamics and equilibrium; Monte Carlo method,
Resolution of racemates - chemical and enzymatic Brownian dynamics and molecular dynamics. Simple and
methods. associated liquids, aqueous solutions, colloids and simple
(ii) Reactivity of molecules: Acids and bases. Factors polymers. Electronic Structure Calculations; Matrix methods
for many particle Schrodinger equation, combining
influencing their relative strengths. Free energy criteria
molecular dynamics methods with electronic structure
for reactivity. Kinetic and thermodynamic criteria for calculations and quantum Monte Carlo etc. The systems to
chemical reactions. Hammond’s postulate and be considered as molecules, metals and semiconductors.
reaction coordinate - potential energy profiles. Kinetic Special methods for macromolecular systems; Energy
vs. thermodynamic control of reactions. Determination minimization in multi-dimensions, visualization (exploration
of reaction mechanisms. of steric and electrostatic complementarities) on systems
(iii) Applications: Formation, stability and aplication of such as biomolecules (protein and nucleic acids), Complex
reactive intermediates. Use of reactive intermediates polymers. Zeolities. Implementation of all the above
methods on computers.
in the design of synthesis of simple organic
compounds. CYP100 Chemistry Laboratory
2 credits (0-0-4)
CYL210 Applied Chemistry: Chemistry at An integrated laboratory course consisting of 12-14
Interfaces experiments from physical, inorganic and organic chemistry.
6 credits (3-1-3) The course exposes the student to inorganic and organic
Pre-requisites: CYP100 & CYL120 synthesis as well as basic quantitative and qualitative
Unit processes in organic synthesis. Laboratory vs. industrial analysis and is designed to illustrate the underlying principles
synthesis. Role of medium in directing synthetic outcomes, of chemical and electro-analytical techniques, dynamics and
organised media. Natural and synthetic constrained systems chemical transformations. The following topics will be
(inorganic and organic) for control of reactivity in organic involved: Titrimetry, Surface tension and viscosity,
reactions. Phase transfer catalysis, polymer and other Potentiometry, Conductometry, Preparations of metal
supported reagents for control of reactions. Green chemistry. complexes, Kinetic experiments, Thermo-chemical
Heterogeneous and homogeneous catalysis, surface measurements, Quantitative estimation of organic
chemistry, kinetics of catalysed reactions. Industrial catalysts. compounds.
73
Department of Civil Engineering
CEC410 Colloquium (CE) CEL212 Environmental Engineering
3 credits (0-3-0) 4 credits (3-0-2)
Pre-requisites: registered for CET410 Pre-requisites: CEN110
Presentation by each student on his/her practical training Water supply: Sources, Water demand and forecasting.
and other topics specified by the course coordinator. Quality of water, water borne diseases, standards, water quality
index. Unit Processes: Systems and unit processes of water
CED310 Mini Project (CE) purification. Water distribution networks. Wastewater
3 credits (0-0-6) Engineering: Systems of sanitation, wastewater flows,
Pre-requisites: EC 80 Collection and conveyance of wastewater, layout systems.
Design/fabrication/implementation work under the guidance Characteristics and microbiology of wastewater. BOD kinetics.
of a faculty member. Prior to registration, a detailed plan of Disposal of treated wastewater on land and in water. Unit
work should be submitted by the student to the Head of the processes for wastewater treatment.
Department for approval.
Sludge management, introduction to solids and hazardous
CED411 Major Project Part 1 (CE) waste management, air and noise pollution and control.
3 credits (0-0-6)
Pre-requisites: EC 120 CEL222 Engineering Geology and Soil
To set the objectives, deliverables, work plan, logistics Mechanics
planning and milestones with discernible outputs and then to
5.5 credits (3-1-3)
demonstrate the feasibility through some initial work.
Pre-requisites: AML110 & CEN110
Engineering Geology: Introduction; Dynamic Earth;
CED412 Major Project Part 2 (CE) Materials of Earth; Silicate Structures and Symmetry Elements;
7 credits (0-0-14) Formations of Rocks; Characterisation; Weathering
Pre-requisites: CED411 Processes; Geological Work – Landforms; Formation of Soils;
Preferably continuation of the topic of CED411. Geological Time Scale; Structural Features; Tectonics; Stress
Distribution; Earthquakes; Geological Maps and Air Photos;
CEL100 Earth and Earth Processes Ground Water. Soil Mechanics: Origin and Classification of
3 credits (3-0-0) Soils; Phase Relationships; Effective Stress Principle; Effective
Environmental crisis, Earth as a closed system, Limitations Stress Under Hydrostatic and 1D flow; Permeability;
of earth resources. Earth resources: Geologic Cycle, Minerals, Compressibility; Consolidation; Terzaghi’s 1D Consolidation
Rocks, Soils, Water, Wind and Ice. Hazardous processes and Theory; Shear Strength; Drainage Conditions; Pore Water
mitigation: River flooding and fluvial processes, Volcanic Pressure; Mohr’s Circle; Failure Envelope and Strength
activity, Earthquakes and related phenomena including seismic Parameters; Factors Affecting Shear Strength.
microzonation, Mass movements and land slides, Marine
activity and coastal erosion. Soil resources: Problematic soils, Laboratory: Geological Mapping – contouring, topo sheets,
Regional distribution, Erosion, Contamination of soils and outcrops, apparent and true dips, three point problems, depth,
thickness, joints, faults; Megascopic and Microscopic
ground water and remediation, Land reclamation. Rock-
identification of Minerals and Rocks. Visual Soil Classification;
masses and stability: In-situ stresses, Discontinuities,
Water Content; Atterberg Limits; Grain Size Analysis; Specific
Weathering, Tunnel collapses and Rock bursts. Mining and
Gravity; Permeability; Introduction to consolidation and
impact: Blasting, Subsidence, Mine fills and wastes. Waste
strength apparatus.
disposal: Nuclear waste repositories. Land evaluation.
Guided tour through representative geological formations
CEL110 Basic Concepts in Sustainable and structures.
Development
4 credits (3-1-0) CEL231 Structural Analysis – I
Introduction; Basic characteristics of pollution and receiving 5 credits (3-1-2)
environment; Concepts in sustainability; Contaminants and Pre-requisites: AML110
fate of contaminants; Noise Pollution, Sustainability and Introduction to structures, loading and modelling. Internal
Bioenvironment, ISO 14000 Series. forces in statically determinate structures – plane and space
trusses, beams, frames, arches and cables. Deflection of
CEL120 Pollution Prevention and Control statically determinate structures – moment area method,
3 credits (3-0-0) conjugate beam method, virtual work method. Static and
Legislative Framework for Environmental Management; Kinematic indeterminacy of structures. Force method of
Introduction to pollution: Sources, types, characteristics and analysis of indeterminate structures including temperature
impacts. Prevention versus control of pollution: changes and lack of fit. Analysis of rolling loads. Influence
Environmentally sound technology management; Tools for lines for statically determinate and indeterminate structures.
clean production: reuse, recycle, recovery, source reduction,
raw material substitution, toxic use reduction and process
CEL232 Concrete Material and Design
modifications. Voluntary environmental programs: life cycle
6 credits (3-1-4)
Pre-requisites: AML110 / AML120
analysis; environmental cost accounting; use of a business-
Chemistry: properties and types of cement:; Properties of
friendly, prevention-based approach; and the measurement
aggregates and fresh concrete; Concrete Mix Design;
of environmental performance, EIA.
Properties of hardened concrete; Reinforcing steel. Design
Urbanization and Sustainability, Environmental Philosophy: Working stress and limit state design concepts;
consequences of personal choices and examples of social Design of R.C. beam Sections in flexure, shear, torsion and
marketing of more environmentally responsible consumption; bond; Design for serviceability; Design of R.C. beams; Design
Public Participation: Structure, Processes and Trends; Conflict of one way and two way R.C. Slabs; Design of R.C. short and
Resolution. long columns; Design of R.C. footings.
74
Civil Engineering
75
Civil Engineering
CEL362 Construction Management Earthmoving machines and earthwork principles; piling and
4 credits (3-1-0) diaphram wall construction; tunneling methods in soils;
Pre-requisites: EC 60 hydraulic barriers and containment systems for waste disposal
Overview of the course, Linear programming, Problems in soils; control and remediation of soil contamination.
in construction, Formulation, Graphical solution, Simplex Laboratory : Lab compaction methods – light, heavy,
method, Dual problem, sensitivity analysis and their kneading, vibratory- for soils and soils with admixtures;
application to Civil engineering, Transportation Assignment plasticity and undrained strength behaviour of compacted and
problems and their applications, Building Specifications, stabilized clays; drained strength behaviour of compacted /
estimation and rate analysis. Project planning and network stabilized sands.
analysis, Time and cost control, Resource scheduling.
CEL422 Rock Engineering
CEL411 Industrial Waste Management 3 credits (3-0-0)
3 credits (3-0-0) Pre-requisites: CEL321
Pre-requisites: EC 90 Overlaps with: CEL651
Nature and characteristics of industrial wastes; Control and Geological classification, rock and rock mass classification,
removal of specific pollutants in industrial wastewaters, i.e., strength and deformation behaviour of rocks, pore pressures,
oil and grease, cyanide, fluoride, toxic organics, heavy metals. failure criteria, laboratory and field testing, measurement of
Recent trends in industrial waste management. in-situ stresses and strains, stability of rock slopes and
Prevention versus control of industrial pollution; Linkage foundations, design of underground structures, improvement
between technology and pollution prevention; Tools for clean of in situ properties of rock masses.
production, reuse, recycle, recovery, source reduction, raw
material substitution, toxic use reduction and process CEL423 Designs of Foundation, Earth and
modifications. Earth Retaining Structures
4 credits (3-1-0)
Point, and area source: dispersion modelling of industrial Pre-requisites: CEL321
air pollutants. Source reduction and control of industrial air Overlaps with: CEL610, CEL704, CEL708
pollution; Minimization of industrial solid and hazardous waste. Shallow Foundations: Bearing Capacity: Bearing failure,
Waste management case studies from various industries. Terminology; Empirical methods, Generalized bearing capacity
76
Civil Engineering
theory, Layered soil, Foundations on or near slopes, Limit injury causations; Mixed traffic flow; Transport related
state design principles. pollution; Technology Vision-2020; Urban and non-urban
traffic noise sources, Noise level factors, Noise pollution;
Deep Foundations: Pile Foundations: Types and their
Energy related aspects of different transport technologies.
selection, Ultimate load of individual piles in compressive, uplift,
Road transport related air pollution, Sources of air pollution,
and lateral loading, Pile load tests, Downdrag, Pile groups.
effects of weather conditions; Vehicular emission
Caissons.
parameters, pollution standards, measurement and analysis
Machine Foundations: Principles of vibrations, Types of of vehicular emission; Mitigative measures; EIA
machine foundations, Design criteria, Design of block requirements of Highway projects, procedure; MOEF/World
foundations. Bank/RC/UK guidelines; EIA practices in India.
Earth Dams: Components, Factors influencing design, CEL450 Introduction to Remote Sensing
Design of components. 3 credits (2-0-2)
Pre-requisites: EC 90
Earth Retaining Structures: Types, Earth pressure, Design
What is Remote Sensing? Historical development of remote
of rigid, flexible and reinforced soil retaining walls, and braced
sensing, Remote sensing components, Data collection and
excavations.
transmission, Sensors and satellite imageries, Electromagnetic
CEL431 Advanced Structural Analysis energy and spectrum, Wavebands, Interactions of
3 credits (2-0-2) electromagnetic energy with atmosphere and earth’s surface,
Pre-requisites: CEL331 radiometric quantities, Photogrammetry and aerial
Introduction to FEM for structural analysis with review of photography, Vertical and tilted photographs, Photographic
energy methods –2D plane stress and plane strain elements, materials, Photo-processes, Stereoscopic viewing, Fly view,
beam element, 2D bending element, example problems, Aerial mosaics, Various satellite systems and monitoring
elements of structural dynamics- free and forced vibration of programs, Data Products, Satellite data, Data formats, Data
SDOF system, treatment of impact and arbitrary loading, acquisition for natural resources management and weather
frequency and time domain analysis; free vibration mode ships forecast, Random errors and least square adjustment,
and frequencies of MDOF systems; normal mode theory for Coordinate transformation, Photographic interpretation, Image
forced vibration analysis of MDOF system; example problems. processing, Potential applications of remote sensing in diverse
Elements of plastic analysis; upper and lower bound theorems; areas and decision making, Integrated use of remote sensing
method of collapse mechanism; application to beams and and GIS, Case studies.
multistory frames; example problems.
CEL451 Water Power Engineering
CEL432 Design of Prestressed Concrete and 4 credits (3-0-2)
Industrial Structures Pre-requisites: CEL251 and EC 90
4 credits (3-0-2) Basic principle of hydropower generation, Hydropower
Pre-requisites: CEL232 & CEL331 Project Planning, Site selection, Hydropower development
Prestressed Concrete Structures – Fundamentals of schemes, Reservoir storage, Assessment of power potential,
prestressing, Prestressing technology, Analysis of prestressed Hydrologic analysis: Flow duration and power duration curves,
members, Prestress losses, Design for Flexure, Design for Dependable flow, Design flood, Reservoir operation; Hydraulic
shear and torsion, Design of anchorage Zones in post- design of various components of hydropower plants: intakes,
tensioned members. Industrial Structures- Analysis and design hydraulic turbines, centrifugal and axial flow pumps, conduits
of Cylindrical shell structures, Folded plates, Chimneys, Silos, and water conveyance..
Bunkers.
Penstocks; Performance characteristics of turbines,
CEL433 Advanced Structural Design Specific and unit quantities, Electrical load on hydro-turbines,
4 credits (3-0-2) Power house dimension and planning, Water hammer and
Pre-requisites: CEL232 & CEL332 surge analysis, Surge tanks, Small hydro power
Design of Reinforced Cement concrete (RCC) Structures – development, tidal plants, Current scenarios in hydropower
Building frames, Liquid retaining structures, Earth retaining development, Project feasibility, Impact of hydropower
walls, Flat slabs, Staircases.Design of Steel Structures – Plate development on water resources systems, environment,
girders, gantry girders and steel bridge components. socioeconomic conditions and national economy.
CEL442 Traffic and Transportation Planning CEL453 Water Resources Management
3 credits (2-1-0) 4 credits (3-1-0)
Pre-requisites: CEL241 and EC 90 Pre-requisites: CEL251 and EC 90
Transportation Engineering System, Random utility theory, Scope of Water Resources Management, Global Trends in
Supply and demand, Flow estimation and modelling, Water Utilization, Crop Water Requirements and Irrigation
Planning and engineering evaluation, Transportation Planning, Modern Irrigation methods such as Sprinkler and
engineering management, Traffic flow theory and Drip Irrigation, Soil Salinity and Water Logging Hazard
management, Air and water navigational control, Mitigation, Drainage Design, Hydropower Systems
Rehabilitation and satellite area accessibility, Network and Management, Economic Analysis of water Resources Projects,
graph theory application. Flood Control studies.
CEL443 Transportation Safety and
CEL455 Introduction to Geographic
Environment
3 credits (3-0-0) Information Systems
Pre-requisites: EC 90 3 credits (2-0-2)
Multidisciplinary approach to planning for traffic safety and Pre-requisites: EC 90
injury control; precrash, crash and post crash models; roles of Overlaps with: CEL747
vehicle, roadway, traffic, driver, and environment, crash and What is GIS. Geographic concepts for GIS. Spatial
77
Civil Engineering
relationships, topology, spatial patterns, spatial interpolation. selection and economy; General construction equipment –
Data storage, data structure, non-spatial database models. excavation, earthmoving, drilling, blasting, dewatering,
Populating GIS, digitizing data exchange, data conversion. shoring, strutting, disposal and underpinning, well sinking
Spatial data models, Raster and Vector data structures and and pile driving, heavy lifting; Operations and maintenance
algorithms. Digital Elevation Models (DEM) and their of equipment, Productivity estimates, Cycle time, Planning
application. Triangulated Irregular Network (TIN) model. GIS and scheduling of equipment by networks, Formworks and
application areas, Spatial analysis, quantifying relationships, scaffolding, Concrete construction practices. Prefabrication
spatial statistics, spatial search. Decision making in GIS and modular coordination; Steel construction, special
context. constructions such dams, bridges, high rise buildings,
offshore platforms.
CEL459 River Mechanics
3 credits (2-0-2) CEN110 Introduction to Civil Engineering
Pre-requisites: CEL251 and EC 90 2 credits (0-0-4)
Introduction, river morpohology, drainage patterns, stream Introductory lectures, demonstrations, field visits on
order. Properties of mixture of sediment and water, Incipient activities of department and the Civil Engineering Profession.
motion and quantitative approach to incipient motion, channel
degradation and armoring. Bed forms and resistance to flow,
CEP200 Design Concepts in Civil Engineering
various approaches for bed load transport, suspended load 2 credits (0-0-4)
profile and suspended load equations, total load transport Pre-requisites: CEN110
including total load transport equations. Comparison and Design concepts in Structural Engineering, Design
evaluation of sediment transport equations. Stable channel concepts in Water Resources Engineering, Design Concepts
design with critical tractive force theory. in Transportation Engineering, Design Concepts in
Environmental Engineering, Design concepts in
CEL464 Construction Contract and Geotechnical Engineering.
Economics
3 credits (2-1-0) CEP452 Computational Aspects in Water
Pre-requisites: EC 90 Resources
Overview of the course, Engineering economics of the 3 credits (1-0-4)
projects, Time value of money, comparison of alternatives, Pre-requisites: CEL251 and EC 90
Depreciation and depletion, Quantity surveying, Direct and Numerical Interpolation and Integration and application of
indirect costs, Professional agreements; Contracts and water resource problems. Numerical solution of differential
specification; Disputes, Arbitration and other methods of equations in water resources, such as, groundwater flow,
dispute resolution. Bidding and bidding models. pipe flows, open channel flows.
CEL466 Construction Equipment and CET410 Practical Training (CE)
Methods Non credit
3 credits (2-1-0) Pre-requisites: EC 90 at the end of 5th sem.
Pre-requisites: EC 90 Practical Training of 50 working days in an Indian industry
Overview of the course; Basic principles of construction, or R&D organization.
78
Department of Computer Science and Engineering
CSC410 Colloquium (CS) CSD854 Major Project Part 2 (CO)
3 credits (0-3-0) 16 credits (0-0-32)
Pre-requisites: Registered for CST410 Pre-requisites: CSD853
The students will deliver talks on their experience during Overlaps with: CSD852
the 50 working days of practical training, and topics of current The student(s) who work on a project are expected to work
interest in the computer science and engineering field. These towards the goals and milestones set in CSD853. At the end
would include technology, research as well standards issues. there would be a demonstration of the solution and possible
future work on the same problem. A dissertation outlining the
CSD310 Mini Project (CS)
entire problem, including a survey of literature and the various
3 credits (0-0-6)
results obtained along with their solutions is expected to be
Pre-requisites: EC 80
produced by each student.
Design/fabrication/implementation work under the guidance
of a faculty member. Prior to registration, a detailed plan of CSL101 Introduction to Computers and
work should be submitted by the student to the Head of the Programming
Department for approval. 4 credits (3-0-2)
CSD411 Major Project Part 1 (CS) Overlaps with: CSL102
4 credits (0-0-8) Concept of an algorithm: termination and correctness.
Pre-requisites: EC 120 Algorithms to programs: specification, top-down development
This project spans also the course CSD412. Hence it is and stepwise refinement. Use of high level programming
expected that the problem specification and the milestones to language for the systematic development of programs.
be achieved in solving the problem are clearly specified. Introduction to the design and implementation of correct,
efficient and maintainable programs. Introduction to computer
CSD412 Major Project Part 2 (CS) architecture: memory, ALU, CPU, I/O devices. Introduction to
8 credits (0-0-16) system software; operating systems, compilers and multi-user
Pre-requisites: CSD411 environments.
The student(s) who work on a project are expected to work
towards the goals and milestones set in CSD411. At the end CSL102 Introduction to Computer Science
there would be a demonstration of the solution and possible 4 credits (3-0-2)
future work on the same problem. A dissertation outlining the Overlaps with: CSL101
entire problem, including a survey of literature and the various Design of algorithms; iterative versus recursive style;
results obtained along with their solutions is expected to be problem solving using a functional style; correctness issues
produced. in programming; efficiency issues in programming; time and
space measures; Imperative style of programming; Assertions
CSD750 Minor Project (CO) and loop invariants; programming in an imperative language
4 credits (0-1-6) using advanced features: procedures, functions, list handling
Pre-requisites: EC 120 using references; file handling; objects and classes.
A semester-long project usually involving design and
implementation under the guidance of any faculty member CSL105 Discrete Mathematical Structures
approved by the department, is undertaken by one or two 4 credits (3-1-0)
students. Overlaps with: MAL180
Fundamental structures: Functions (surjections, injections,
CSD851 Major Project Part 1 (CO) inverses, composition); relations (reflexivity, symmetry,
6 credits (0-0-12) transitivity, equivalence relations); sets (Venn diagrams,
Pre-requisites: EC 165 complements, Cartesian products, power sets); pigeonhole
Overlaps with: CSD853 principle; cardinality and countability. Basic logic: Propositional
This project spans also the course CSD852. Hence it is logic; logical connectives; truth tables; normal forms
expected that the problem specification and the milestones to (conjunctive and disjunctive); validity; predicate logic;
be achieved in solving the problem are clearly specified. limitations of predicate logic; universal and existential
CSD852 Major Project Part 2 (CO) quantification; modus ponens and modus tollens. Proof
14 credits (0-0-28) techniques: Notions of implication, converse, inverse,
Pre-requisites: CSD851 contrapositive, negation, and contradiction; the structure of
Overlaps with: CSD854 formal proofs; direct proofs; proof by counterexample; proof
The student(s) who work on a project are expected to work by contraposition; proof by contradiction; mathematical
towards the goals and milestones set in CSD851. At the end induction; strong induction; recursive mathematical definitions;
there would be a demonstration of the solution and possible well orderings. Basics of counting: Counting arguments;
future work on the same problem. A dissertation outlining the pigeonhole principle; permutations and combinations;
entire problem, including a survey of literature and the various inclusion-exclusion, recurrence relations, generating functions.
results obtained along with their solutions is expected to be
CSL201 Data Structures
produced by each student.
5 credits (3-0-4)
CSD853 Major Project Part 1 (CO) Pre-requisites: CSL101 / CSL102
4 credits (0-0-8) Introduction to object-oriented programming through stacks,
Pre-requisites: EC 165 queues and linked lists. Dictionaries: skip-lists, hashing,
Overlaps with: CSD851 analysis of collision resolution techniques. Trees, traversals,
This project spans also the course CSD854. Hence it is binary search trees, Balanced BST, Tries. Priority queues and
expected that the problem specification and the milestones to binary heaps. Object oriented implementation and building
be achieved in solving the problem are clearly specified. libraries Applications to discrete event Simulation Sorting:
79
Computer Science and Engineering
merge, quick, radix, selection and heap sort. Graphs: Breadth database models, Representation and Evaluation of
first search and connected components. Depth first search in Relationship, The Relational Database Model, Functional
directed and undirected graphs. Union-find data structure and Dependencies, Multi-valued and join Dependency,
applications. Directed acyclic graphs: topological sort . Normalization Theory, Concurrency Control in Relational
Databases, Object Oriented Data Models.
CSL211 Computer Architecture
5 credits (3-1-2) CSL333 Artificial Intelligence
Pre-requisites: (CSL101/CSL102) & 4 credits (3-0-2)
(EEL201&EEP201) (Concurrent registration in Pre-requisites: CSL201
EEL201&EEP201 is acceptable) Overlaps with: EEL758
Overlaps with: EEL308, EEP308 Problem solving, search techniques, control strategies,
Subsystems of a computer; Instructions and their formats; game playing (minimax), reasoning, knowledge
Assembly programming; Performance metrics; Performance representation through predicate logic, rule-based systems,
comparison; Information representation; Integer and floating semantic nets, frames, conceptual dependency formalism.
point arithmetic; Processor datapath design; Control unit Planning. Handling uncertainty: Bayesian Networks,
design; Microprogramming; Performance improvement with Dempster-Shafer theory, certainty factors. Fuzzy logic,
pipelining; Memory organization - cache and virtual memory;
Learning through Neural nets- Back propagation, radial
Input/Output organization; Interrupts and DMA.
basis functions, Neural computational models - Hopfield
CSL302 Programming Languages Nets, Boltzman machines. PROLOG programming.
5 credits (3-0-4)
Pre-requisites: CSL201 CSL356 Analysis and Design of Algorithms
Overlaps with: MAL375 4 credits (3-1-0)
Notions of syntax and semantics of programming languages; Pre-requisites: CSL201 & CSL105
introduction to operational/natural semantics of functional and Overlaps with: MAL342
imperative languages. Data abstractions and control RAM model and complexity: O(log n) bit model, Integer sorting
constructs; block-structure and scope, principles of abstraction, and string sorting, Review of fundamental data structures: Red-
qualification and correspondence; parameter passing black trees, mergeable heaps, interval trees Fundamental
mechanisms; runtime structure and operating environment; design methodologies and their implementations: Search
practical and implementation issues in run-time systems and Techniques, Dynamic Programming, Greedy algorithms, Divide
environment; abstract machines; features of functional and and Conquer, Randomized Techniques. Algorithms for set
imperative languages; the untyped and simply-typed Lambda manipulations, their implementations and applications: Union-
calculus, type systems for programming languages including Find Randomized data structures: Skip Lists, Universal Hash
simple types and polymorphism; objects, classes and functions, Graph Algorithms with implementation issues; Depth-
inheritance in object-oriented languages. First Search and its applications, minimum Spanning Trees
and Shortest Paths. Convex hulls, sorting, Selection Matrix
CSL303 Logic for Computer Science multiplication, pattern matching, integer and polynomial
4 credits (3-0-2)
arithmetic, FFT. Introduction to the Theory of Lower Bounds,
Pre-requisites: CSL201
NP-Completeness and Reductions. Approximation algorithms.
Review of the principle of mathematical induction; the
principle of structural induction; review of Boolean algebras; CSL361 Numerical and Scientific Computing
Syntax of propositional formulas; Truth and the semantics of 5 credits (3-1-2)
propositional logic; Notions of satisfiability, validity, Pre-requisites: CSL101 / CSL102 and EC 60
inconsistency; Deduction systems for propositional logic; Overlaps with: MAL230, EPL333
Completeness of a deduction system; First order logic; Proof Introduction to Scientific Computing, Review of matrices
theory for FOL; introduction to model theory; Completeness and linear systems, Linear Least Squares, Eigenvalue
and compactness theorems; First order theories. Programming Problems, Nonlinear Equations. Optimization, Interpolation,
exercises will include representation and evaluation; Numerical Integration and Differentiation, Initial and
conversion to normal-forms; tautology checking; proof Boundary Value Problems for Ordinary Differential
normalization; resolution; unification; Skolemization; Equations, Partial Differential Equations, Fast Fourier
conversion to Horn -clauses; binary-decision diagrams. Transform. Throughout the course, implementation of the
CSL316 Digital Hardware Design various methods and their comparisons with professionally
5 credits (3-0-4) written software such as LINPACK, ITPACK, EISPACK,
Pre-requisites: CSL211 & EEL201 & EEP201 LAPACK, SPARSE PACK will be emphasized with the
Overlaps with: EEL324 understanding of various data-structures, storage schemes
Combinational circuit design using MSI/LSI and etc. Existence and uniqueness, sensitivity and condition,
programmable logic modules; Iterative and tree networks; convergence and error analysis will be part of every topic.
Sequential circuit design and implementation; Algorithmic state CSL362 Simulation and Modelling
machine design; Asynchronous and pulse mode circuit design; 4 credits (3-0-2)
Hardware description language and synthesis; Pre-requisites: CSL201 & MAL250
Microprogrammed control design; Testing of digital systems; Fundamentals of modelling; Classification of simulation
Introduction to hardware-software codesign.
models; The simulation process: System investigation; model
CSL332 Introduction to Database Systems formulation, validation and translation; Time flow mechanisms;
4.5 credits (3-0-3) Design of computer simulation experiments; Simulation of
Pre-requisites: CSL201 complex discrete-event systems with applications in industrial
Overlaps with: MAL710 and service organizations. Tactical planning and management
The world of Database Systems, The E-R Model, The three aspects; Random variable generation and analysis.
80
Computer Science and Engineering
CSL373 Operating Systems and FPGA are introduced. The course concludes with a
5 credits (3-0-4) brief overview of layout synthesis topics: placement and
Pre-requisites: CSL201 & CSL211 & CSL302 routing.
Overlaps with: CSL633, EEL358, MAL358 CSL728 Compiler Design
Overview: functions of Operating Systems, layered 4.5 credits (3-0-3)
architecture; basic concept; interrupt architecture, system calls Pre-requisites: CSL302 & CSL705
and notion of a process and threads; synchronization and Overlaps with: EEL702
protection issues; scheduling; memory management including Compilers and translators; lexical and syntactic analysis,
virtual memory and paging techniques; input-output top-down and bottom up parsing techniques, internal form of
architecture and device management; file systems; distributed source programs; semantic analysis, symbol tables, error
file systems; Case studies of Unix , Windows NT. Design detection and recovery, code generation and optimization. Type
and implementation of small operating systems. checking and static analysis. Algorithms and implementation
CSL374 Computer Networks techniques for type-checking, code-generation and
optimization. Students will design and implement translators,
4.5 credits (3-0-3)
static analysis, typechecking, and optimization.
Pre-requisites: EEL205 & CSL211 & CSL201
Overlaps with: EEL703 CSL740 Software Engineering
Fundamentals of Digital Communications, including 4 credits (3-0-2)
channel capacity, error rates, multiplexing, framing and Pre-requisites: CSL201 & CSL302
synchronization. Broadcast network and multi-access Overlaps with: MAL745
protocols, including CSMA/CD. Data link protocols, Network Concepts and techniques relevant to production of large
protocols including routing and congestion control, IP software systems: Structured programming. Requirements
protocol. Transport protocol including TCP. Network specification and analysis. Top-down design and development.
application services and protocols including email, www, Information hiding, abstraction, modularity, object-oriented
DNS. Network security and management. techniques. Separate compilation, configuration management,
program libraries. Design patterns; UML. Documentation.
CSL705 Theory of Computation Validation. Quality assurance, safety. Testing and test case
4 credits (3-1-0) generation. Software metrics. Cost analysis and estimation,
Pre-requisites: CSL105 & EC 90 manpower and time management. Organization and
Regular Languages, Finite Automata, equivalence, management of large software design projects.
minimization, Myhill-Nerode Theorem, introduction to non- CSL750 Foundations of Automatic
determinism, Context free grammars, Pushdown automata, Verification
equivalence, and applications Turing machines, Recursive 4 credits (3-0-2)
and Recursively enumerable sets, non-determinism, RAMs Pre-requisites: CSL302 & CSL705
and equivalence, Universal Turing Machines, undecidability, A selection from the following topics, and experiments with
Rice’s theorems for RE sets Post machines, Basics of the mentioned tools:
Recursive function theory, equivalence, Church’s thesis
Computational Complexity, space and time complexity of Review of first-order logic, syntax and semantics.
Turing Machines, Relationships, Savage’s theorem, Resolution theorem proving. Binary Decision Diagrams (BDDs)
Complexity classes, Complete problems, NP completeness, and their use in representing systems. (Programming exercises
Cook-Levin theorem. coding and using logic programming frameworks). Transition
systems, automata and transducers. Buechi and other
CSL718 Architecture of High Performance automata on infinite words; Linear Time Temporal Logic (LTL),
Computers and specifying properties of systems in LTL; the relationship
4 credits (3-0-2) between temporal logic and automata on infinite words, LTL
Pre-requisites: CSL373 Model checking (exercises using Spin or similar tools);
Classification of parallel computing structures; Instruction Computational Tree Logic (CTL and CTL*); CTL model
level parallelism - static and dynamic pipelining, improving checking (exercises); Process calculi such as CSP and CCS.
branch performance, superscalar and VLIW processors; Notions of program equivalence — traces, bisimulation and
High performance memory system; Shared memory other notions. Hennessy-Milner Logic (HML) and Mu calculus
multiprocessors and cache coherence; Multiprocessor (exercises using tools such as CWB — Concurrency Work
interconnection networks; Performance modelling; Issues Bench). Symbolic model checking, exercises using tools such
in programming multiprocessors; Data parallel as SMV. Sat-based model checking and Davis-Putnam
architectures. procedure; (exercises using tools such as nuSMV). Possible
additional topics include: equational logic frameworks, real-
CSL719 Synthesis of Digital Systems time frameworks, reactive frameworks, pi-calculus (exercises
4 credits (3-0-2) using tools such as the Mobility Workbench), Tree automata
Pre-requisites: CSL316 and Weak Second-order Logic with k successors (WSkS),
After a basic overview of the VLSI design flow, hardware (exercises using Mona or similar tools).
modelling principles and hardware description using the
VHDL language are covered. This is followed by a study of CSL758 Advanced Algorithms
the major steps involved in behavioural synthesis: 4 credits (3-1-0)
scheduling, allocation, and binding. This is followed by
Pre-requisites: CSL356/CSL630
register-transfer level synthesis, which includes retiming and
Overlaps with: MAL760
Topics from some or all of the following areas:
Finite State Machine encoding. Logic synthesis, consisting
of combinational logic optimisation and technology mapping, Advanced data structures: self-adjustment, persistence and
is covered next. Popular chip architectures - standard cells multidimensional trees. Randomized algorithms: Use of
81
Computer Science and Engineering
probabilistic inequalities in analysis, Geometric algorithms: mapping, timing analysis, placement and routing,
Point location, Convex hulls and Voronoi diagrams, Reconfigurable devices - from fine-grained to coarse-grained
Arrangements applications using examples. Graph devices, Reconfiguration modes and multi-context devices,
algorithms: Matching and Flows. Approximation algorithms: Dynamic reconfiguration, Compilation from high level
Use of Linear programming and primal dual, Local search languages, System level design for reconfigurable systems:
heuristics. Parallel algorithms: Basic techniques for sorting, heuristic temporal partitioning and ILP-based temporal
searching, merging, list ranking in PRAMs and partitioning, Behavioral synthesis, Reconfigurable example
Interconnection networks. systems’ tool chains.
CSL771 Database Implementations CSL830 Distributed Computing
4 credits (3-0-2) 3 credits (3-0-0)
Pre-requisites: CSL332 & CSL201 Pre-requisites: CSL303 & CSL373 & CSL705
Overlaps with: CSL630 Models of Distributed Computing; Basic Issues: Causality,
Relational Algebra, Database Language SQL and System Exclusion, Fairness, Independence, Consistency;
Aspects of SQL, Constraints and triggers, Disk Storage, Disk Specification of Distributed Systems: Transition systems,
and Memory Organization for Relational Operators, petri nets, process algebra properties: Safety, Liveness,
Representing Data Elements, Index Structures, Query stability.
Execution, Query Compilation, Query Optimization, Coping
CSL831 Semantics of Programming
with System Failures, Concurrency Control, Transaction
Languages
Management, Representation of Data.
3 credits (3-0-0)
CSL781 Computer Graphics Pre-requisites: CSL302 & CSL303 and EC 120
4.5 credits (3-0-3) Study of operational, axiomatic and denotational semantics
Pre-requisites: CSL201 and EC 90 of procedural languages; semantics issues in the design of
Overlaps with: MAL754, EEL754 functional and logic programming languages, study of
Graphics pipeline; Graphics hardware: Display devices, abstract data types.
Input devices; Raster Graphics: line and circle drawing
CSL832 Proofs and Types
algorithms; Windowing and 2D/3D clipping: Cohen and
3 credits (3-0-0)
Sutherland line clipping, Cyrus Beck clipping method; 2D and
Pre-requisites: CSL302 & CSL303 and EC 120
3D Geometrical Transformations: scaling, translation, rotation,
Syntax and semantic foundations: Ranked algebras,
reflection; Viewing Transformations: parallel and perspective
homomorphisms, initial algebras, congruences. First-order
projection; Curves and Surfaces: cubic splines, Bezier curves,
logic review: Soundness, completeness, compactness.
B-splines, Parametric surfaces, Surface of revolution, Sweep
Herbrand models and Herbrand’s theorem, Horn-clauses
surfaces, Fractal curves and surfaces; Hidden line/surface
and resolution. Natural deduction and the Sequent calculus.
removal methods; illuminations model; shading: Gouraud,
Normalization and cut elimination. Lambda-calculus and
Phong; Introduction to Ray-tracing; Animation; Programming
Combinatory Logic: syntax and operational semantics (beta-
practices with standard graphics libraries like openGL.
eta equivalence), confluence and Church-Rosser property.
CSL783 Digital Image Analysis Introduction to Type theory: The simply-typed lambda-
4.5 credits (3-0-3) calculus, Intuitionistic type theory. Curry-Howard
Pre-requisites: EEL205 & CSL201 and EC 90 correspondence. Polymorphism, algorithms for polymorphic
Overlaps with: MAL715, EEL715 type inference, Girard and Reynolds’ System F. Applications:
Digital Image Fundamentals; Image Enhancement in Spatial type-systems for programming languages; modules and
Domain: Gray Level Transformation, Histogram Processing, functors; theorem proving, executable specifications.
Spatial Filters; Image Transforms: Fourier Transform and their
CSL840 Computer Vision
properties, Fast Fourier Transform, Other Transforms; Image
4 credits (3-0-2)
Enhancement in Frequency Domain; Color Image Processing;
Pre-requisites: EC 120
Image Warping and Restoration; Image Compression; Image
Overlaps with: EEL806
Segmentation: edge detection, Hough transform, region based
Camera models. Calibration, multi-views projective
segmentation; Morphological operators; Representation and
geometry and invariants. Edge/feature extraction,
Description; Features based matching and Bayes
correspondence and tracking. 3D structure/motion
classification; Introduction to some computer vision techniques:
estimation. Object recognition. Scene and activity
Imaging geometry, shape from shading, optical flow;
interpretation.
Laboratory exercises will emphasize development and
evaluation of image processing methods. CSL847 Distributed Algorithms
3 credits (3-0-0)
CSL812 System Level Design and Modelling
Pre-requisites: CSL356 & CSL373 and EC 120
3 credits (3-0-0)
Models of synchronous and asynchronous distributed
Pre-requisites: CSL719
computing systems: synchronous networks, asynchronous
Embedded systems and system-level design, models of
shared memory, asynchronous networks etc.; basic
computation, specification languages, hardware/software co-
algorithms for synchronous and asynchronous networks:
design, system partitioning, application specific processors and
leader election, breadth first search, shortest path, minimum
memory, low power design.
spanning tree etc.; advanced synchronous algorithms:
CSL821 Reconfigurable Computing distributed consensus with failures, commit protocols;
3 credits (3-0-0) asynchronous shared memory algorithms: mutual exclusion
Pre-requisites: CSL316 and EC 120 and consensus; relationship between shared memory and
FPGA architectures, CAD for FPGAs: overview, LUT network models; asynchronous networks with failures.
82
Computer Science and Engineering
CSL851 Algorithmic Graph Theory calculus and combinatory logic. Logic — completeness and
3 credits (3-0-0) incompleteness. Decidability and Church-Turing hypothesis.
Pre-requisites: CSL356 and EC 120 Limitations of the standard model. Coding and Information
Overlaps with: MAL376 theory. Thermodynamics of computation. Quantum
Intoroduction to graphs. Max-flow Min-cut theorem. computation and quantum algorithms. Physical aspects of
Algorithms for computing maximum s-t flows in graphs.
computation.
Algorithms for computing the minimum cut in a graph. Edge
and vertex connectivity of graphs and Menger’s theorem. CSL856 Mathematical Programming
Maximum matching, Hall’s theorem, algorithms for computing 3 credits (3-0-0)
maximum matching in weighted and unweighted graphs. Pre-requisites: EC 120
Arborescences and algorithm for computing minimum Overlaps with: MAL365
arboresence. Edmonds theorem for disjoint arborescences.
Linear Algebra and Complexity. Theory of Lattices and
Planar graphs and algorithms for checking for planarity. Edge
Linear Diophantine Equations. Algorithms for Linear
and vertex colouring of graphs. Independent sets and perfect
graphs. Extremal graph theory. Diophantine Equations. Diophantine Approximation and
Basis Reduction. Fundamental Concepts and Results on
CSL852 Computational Geometry Polyhedra, Linear Inequalities, and Linear Programming.The
3 credits (3-0-0) Structure of Polyhedra. Polarity, and Blocking and Anti-
Pre-requisites: CSL705 & CSL 356 Blocking Polyhedra. Sizes and the Theoretical Complexity of
Visibility problems and triangulation. Line sweep and
Linear Inequalities and Linear Programming.The Simplex
angle sweep: segment intersection, area, perimeter,
diameter, width. Planar Point location: Kirkpatrick’s hierarchy, Method, Primal-Dual, Elimination, and Relaxation Methods.
Persistent data structure, Multidimensional data structures: The Ellipsoid Method for Polyhedra More Generally.
Segment trees, range trees, orthogonal range searching, Karmarkar’s method for linear programming. Introduction to
Convex hulls and Voronoi diagrams: 2d, 3d hulls, 2d Voronoi Integer Linear Programming. Estimates in Integer Linear
diagrams, dynamic maintenance, Duality between hulls and Programming. The Complexity of Integer Linear
Voronoi diagrams, Duality between lines and points, higher Programming. Totally Unimodular Matrices: Fundamental
order Voronoi diagrams Arrangements : Construction and Properties and Examples. Integral Polyhedra and Total Dual
bounds, k-sets, Zone theorem Algebraic lower bounds: Integrality. Cutting Planes. Further Methods in Integer Linear
Linear Decision model Ben-Or’s theorem Randomized Programming.
algorithms: Random sampling, Incremental construction,
Backward analysis Optimization : Monge matrices, Fixed CSL858 Advanced Computer Networks
dimensional linear programming, Prune and Search 4 credits (3-0-2)
Parametric search: kth intersection, k-th nearest neighbour. Pre-requisites: CSL374
Recent topics : Instructor’s choice. Overlaps with: CSL672
Flow and Congestion Control: Window and Rate Based
CSL853 Complexity Theory
3 credits (3-0-0) Schemes, Decbit, TCP, ATM ABR, hop-by-hop schemes.
Pre-requisites: CSL705 & CSL356 Quality of Service: in ATM, IETF integrated services model,
Turing machines and non-determinism, models of Differentiated Services Model. Flow Identification, Packet
computation like RAM and pointer machines, Relations Classifiers and Filters. Scheduling. Network Management:
between complexity classes, time-space tradeoffs for some ASN, SNMP, CMIP. Issues in the management of large
fundamental problems. Reductions and completeness, networks. Multicast: IGMP, PIM, DVMRP. Mobility: Mobile IP.
Randomized complexity classes, Boolean circuit complexity.
Cryptography and one-way functions. Polynomial hierarchy,
CSL859 Advanced Computer Graphics
P-space completeness. Interactive proofs and Hardness of 4 credits (3-0-2)
approximation, Parallel complexity classes. Pre-requisites: CSL781
Rendering: Ray tracing, Radiosity methods, Global
CSL854 Approximation Algorithms illumination models, Shadow generation, Mapping, Anti-
3 credits (3-0-0) aliasing, Volume rendering, Geometrical Modelling:
Pre-requisites: CSL356 and EC 120 Parametric surfaces, Implicit surfaces, Meshes, Animation:
NP-hardness and approximation algorithms. Different spline driven, quarternions, articulated structures (forward
kinds of approximability. Linear programming and Duality. and inverse kinematics), deformation — purely geometric,
Randomized Rounding. Covering and packing problems.
physically-based, Other advanced topics selected from
Facility location, machine scheduling and bin packing. Primal
research papers.
dual approximation algorithms in graph connectivity and
Network design. Multi-commodity flows and cuts. Graph CSL860 Special Topics in Parallel
embeddings and their application to sparsest cuts, Computation
separators and bandwidth minimization. Feedback arc sets 3 credits (3-0-0)
and Linear ordering problems. Shop scheduling: Open, flow Pre-requisites: CSL201 and EC 120
and job shop. Semi definite programming and applications The course will focus on research issues in areas like
to max-cut, graph colouring. Concept of best possible
parallel computation models, parallel algorithms, Parallel
approximation algorithms, Hardness of approximations.
Computer architectures and interconnection networks,
CSL855 Models of Computation Shared memory parallel architectures and programming with
3 credits (3-0-0) OpenMP and Ptheards, Distributed memory message-
Pre-requisites: EC 120 passing parallel architectures and programming, portable
Computing and the notion of an effective procedure. RAM parallel message-passing programming using MPI. This
model. Primitive and partial recursive functions. Lambda will also include design and implementation of parallel
83
Computer Science and Engineering
numerical and non-numerical algorithms for scientific and CSL869 Special Topics in Concurrency
engineering, and commercial applications. Performance 3 credits (3-0-0)
evaluation and benchmarking high-performance computers. Pre-requisites: EC 120
The course will focus on research issues in concurrent,
CSL861 Special Topics in Hardware Systems
distributed and mobile computations. Some of the following
3 credits (3-0-0)
topics will be covered: Models of Concurrent, Distributed
Pre-requisites: EC 120
and Mobile computation. Process calculi, Event Structures,
Under this topic one of the following areas will be covered:
Petri Nets an labeled transition systems. Implementations
Fault Detection and Diagnosability. Special Architectures.
of concurrent and mobile, distributed programming
Design Automation Issues. Computer Arithmetic, VLSI.
languages. Logics and specification models for concurrent
CSL862 Special Topics in Software Systems and mobile systems. Verification techniques and algorithms
3 credits (3-0-0) for model checking. Type systems for concurrent/mobile
Pre-requisites: EC 120 programming languages. Applications of the above models
Special topic that focuses on state of the art and research and techniques.
problems of importance in this area.
CSN110 Introduction to Computer Science and
CSL863 Special Topics in Theoretical Engineering
Computer Science 2 credits (0-0-4)
3 credits (3-0-0) Overview of the Department’s academic/research
Pre-requisites: EC 120 programmes; state of the computer industry in India and
Under this topic one of the following areas will be covered: abroad.
Design and Analysis of Sequential and Parallel Algorithms.
CSP301 Design Practices in Computer Science
Complexity issues, Trends in Computer Science Logic,
3 credits (0-1-4)
Quantum Computing and Bioinformatics, Theory of
Pre-requisites: CSL201
computability. Formal Languages. Semantics and Verification
Basic design methodology – introduction to the steps
issues.
involved, Familiarization with software practices, tools and
CSL864 Special Topics in Artificial techniques, Software project involving conceptualization,
Intelligence design, analysis, implementation and testing using the tools
3 credits (3-0-0) and techniques learnt.
Pre-requisites: CSL433
CSP315 Embedded System Design Laboratory
Under this topic one of the following areas will be covered:
4 credits (0-1-6)
Issues in Expert Systems. Theorem Proving. Natural
Pre-requisites: CSL211
Language Processing. AI in Speech and Computer Vision.
This course is a project oriented course where a group of
Higher Order Logic Programming, Machine Learning,
students (normally 3 to 5) would be required to work on an
Advanced Neural Networks.
innovative embedded system design project. Though the
CSL865 Special Topics in Computer emphasis would be on implementation, they would be
Applications required to go through all aspects of system design including
3 credits (3-0-0) drawing up proper specifications as well as evaluation of
Pre-requisites: EC 120 alternatives. The tutorial hour would be utilized both for
Special topic that focuses on special topics and research preliminary introduction to embedded components by the
problems of importance in this area. instructor(s) as well as regular presentation by each group
for sharing with other groups.
CSL866 Special Topics in Algorithms
3 credits (3-0-0) CSR310 Professional Practices (CS)
Pre-requisites: CSL356 & CSL705 2 credits (0-1-2)
The course will focus on specialized topics in areas like
Pre-requisites: EC 60
The course would consist of talks by working professionals
Computational Topology, Manufacturing processes,
from industry, government and research organizations. It may
Quantum Computing, Computational Biology, Randomized
also include site visits to various organizations.
algorithms and other research intensive topics.
CSS310 Independent Study (CS)
CSL867 Special Topics in High Speed 3 credits (0-3-0)
Networks Pre-requisites: EC 60
3 credits (3-0-0) Research oriented activities or study of subjects outside
Pre-requisites: EC 120 regular course offerings under the guidance of a faculty
Research level issues and problems of current interest in member. Prior to registration, a detailed plan of work should
the area. be submitted by the student to the Head of the Department
CSL868 Special Topics in Database Systems for approval.
3 credits (3-0-0) CST410 Practical Training (CS)
Pre-requisites: EC 120 Non credit
The contents would include specific advanced topics in Pre-requisites: EC 90 at the end of 5th sem.
Database Management Systems in which research is Expose the students to the actual Industrial environment.
currently going on in the department. These would be Fifty (50) working days or 400 hours of practical training in an
announced every time the course is offered. industry/research laboratory.
84
Computer Science and Engineering
85
Department of Electrical Engineering
EEC410 Colloquium (EE) EED750 Minor Project (EI)
3 credits (0-3-0) 3 credits (0-0-6)
Pre-requisites: registered for EET410 Pre-requisites: EC 120
Students will deliver talks about their experience during A semester-long project usually involving design and
practical training, and on topics of current interest. implementation under the guidance of a faculty member.
86
Electrical Engineering
production of force and EMF. Electro-mechanical energy and random process, characterization of random variables and
conversion. Principles of rotating machines. Electrical and random process, linear systems and random signals.
electronic materials. Laboratory experiments will be based on
EEL207 Engineering Electromagnetics
these topics.
4 credits (3-1-0)
EEL201 Digital Electronic Circuits Pre-requisites: PHL110
4 credits (3-1-0) Review of Maxwell’s equations, wave propagations in
Pre-requisites: EEL101 / EEL102 unbounded medium.Boundary conditions, reflection and
Review of Boolean Algebra, Karnaugh Map and Logic refraction of plane waves.Transmission Lines: distributed
Gates;Designing combinational Circuits using gates and/or parameter circuits, traveling and standing waves, impedance
Multiplexers; Introduction to logic families: TTL, ECL, CMOS; matching, Smith chart, analogy with plane waves.Waveguides:
PLAs and FPGAs; Sequential Circuits: Flip Flops,Counters parallel-plane guide, TE, TM and TEM waves, rectangular and
and Registers; Design of Sequential Circuits: STD and cylindrical waveguides, resonators.Planar transmission lines:
applications; Pipelining and Timing issues; Memories. stripline, microstripline, application of numerical
techniques.Dielectric guides and optical fibres.Radiation:
EEL202 Circuit Theory retarded potentials, Hertzian dipole, short loop, antenna
4 credits (3-1-0) parameters.Radio-wave propagation: ground-wave, sky-wave,
Pre-requisites: EEL101 / EEL102 space-wave.
Overview of network analysis techniques, Network
theorems, Transient and steady state sinusoidal response. EEL209 Power Electronics Devices and
Network graphs and their applications in network analysis. Circuits
Tellengen’s theorem, Two-port networks, z, y,h and 4 credits (3-1-0)
transmission parameters, combination of two ports, Analysis Pre-requisites: EEL101 / EEL102
of common two ports, Resonance, Coupled circuits, Scattering Basic features of semiconductor junctions, the BJT
matrix and its application in network analysis. Network operations at high currents, switching features of the BJT and
MOS transistors. The thyristor operation, distributed gates.
functions, parts of network functions, obtaining a network
IGBT operation, principles and ratings. Boost and buck
function from a given part. Network transmission criteria; delay
converters using BJT and IGBT circuits-problems, design and
and rise time, Elmore’s and other definitions of cascading.
operation. Snubber designs and protection. Firing circuits.
Elements of network sythesis techniques. Butterworth and
Thyristor and BJT based converters-design, phase control,
Chebyshev Approximation.
effects on power factor and harmonics, firing circuits and their
EEL203 Electromechanics designs. Inverter circuits operation. Designs using BJT’s and
4 credits (3-1-0) MOS devices. Base and gate drive circuits, snubbers,
Pre-requisites: EEL101 / EEL102 operational problems. The basic concept of PWM control and
Review of 1-phase, 3- phase circuits and magnetic circuits, advantages against phase control. AC voltage controllers,
transformers- 1-phase and 3-phase, special multiphase choppers and cycloconverters.
transformers and their applications, Electro mechanical Energy EEL212 Measurements and Instrumentation
conversion principles and rotating machines, DC machines- 3 credits (3-0-0)
construction, characteristics, commutation, armature reaction, Pre-requisites: EEL101 / EEL102
speed control of DC motors and applications in drives; Principles of Measurement, bridge measurements,
Synchronous machine-construction, characteristics, oscilloscope, measurements of analog waveforms, Q-meter,
regulation, V-curves, parallel operation; Induction machines- Spectrum Analysis, Special transducers, A/D and D/A,
3-phase and 1- phase- construction, characteristics, starting, Telemetering, Data recording and display, Computer-aided
braking and speed control, Induction generators and Measurement systems.
applications- Fractional kW motors, special machines- PM
machines, SRM, stepper motors and their applications. EEL218 Physical Electronics
3 credits (3-0-0)
EEL204 Analog Electronics Circuits Pre-requisites: EEL101 / EEL102
4 credits (3-1-0) Overlaps with: EPL213, EPL439
Pre-requisites: EEL101 / EEL102 Band model of solids, electrons and holes in
Review of working of BJT, JFET and MOSFET and their semiconductors, carrier statistics, current flow in
small signal equivalent Circuit; Biasing of BJT, JFET and semiconductors, Junction devices, Metal-oxide-semiconductor
MOSFET circuits; Analysis and Design of various single stage devices, Schottky and optoelectronic devices.
amplifier configurations; Multi Stage Amplifiers; Differential
Amplifier and Operational Amplifier; Feedback Amplifiers;
EEL301 Control Engineering - I
Tuned Amplifiers; Oscillators.
4 credits (3-1-0)
Pre-requisites: EEL205
EEL205 Signals and Systems Overlaps with: MEL312, CHL261
4 credits (3-1-0) Introduction to the control problem, Industrial control
Pre-requisites: EEL101 / EEL102 / MAL110 / examples, Transfer function models of suitable mechanical,
MAL111 / MAL115 electrical, thermal and pneumatic systems. Systems with dead
Classification of signals and systems, various system time, Control hardware and their models: Potentiometers,
representation techniques, differential, difference and state- synchros, LVDT, DC and AC servo motors, tachogenerators,
space representations, Fourier transforms and series, electro-hydraulic valves, pneumatic actuators. Closed loop
application to analysis of systems, Laplace transform, its control systems, Block diagram and signal flow analysis, Basic
properties, and its application to system analysis, Z- Characteristics of feedback control systems : stability, steady-
transforms, its properties and applications, Random variables state accuracy, transient accuracy, disturbance rejection,
87
Electrical Engineering
insensitivity and robustness.Basic modes of feedback bus transactions; Input-output Systems: programmed I/O,
control :Proportional Integral, Derivative. Concept of stability DMA and interrupt driven I/O. Illustrations with examples of
and Routh stability criterion.Time response of 2nd order CISC processors from Intel and RISC processors like MIPS
system, steady state error and error constants, Performance and ARM.
specifications in the time domain. Root locus method of
design. Lead and lag compensation. Nyquist stability EEL311 Graph Theory and its Application to
criterion. Frequency response analysis: Nyquist plots, Electrical Engineering
constant M circles, constant N-circles, Bode plots, Nichols 3 credits (3-0-0)
Charts Performance specifications in frequency domain, Pre-requisites: CSL201
Frequency-domain methods of design. Lead and lag. Overlaps with: MAL376, MAL468
Basic of graph theory: trees, f-circuits, f-cutsets, connected
EEL303 Power Engineering - I and seperable graphs etc. Matrices of a graph and relations
4 credits (3-1-0) between them. Generation of network functions of one and
Pre-requisites: EEL203 two-port networks using spanning tree and directed tree
Energy resources, power generation: Thermal, hydro and algorithms. Graph searches like BFS and DFS. Path problems
nuclear power plants. Transmission lines, line parameters, like shortest paths, all paths between a pair of nodes etc.
corona, interference of power lines with communication Generation of directed graphs and their use in the
circuits, line insulators. Cables, per unit system, symmetrical determination of transfer functions of networks. Applications
components, fault analysis, switching surges. Integrated of graph algorithms in routing, assignment and other problems
operation of power systems, basic concepts of load flow, in VLSI design.
economic operation, stability, protection, HVDC transmission.
Load management and tariffs. EEL314 Medical Electronics
3 credits (3-0-0)
EEL305 Electric Drives Pre-requisites: EEL204
4 credits (3-1-0) Basic principles of biomedical, instrumentation and
Pre-requisites: EEL203 techniques. Problems of interfacing biomedical, electrical and
Requirements, components and benchmarks of electric electronic equipments with living systems, measuring
drives. Review of induction motor theory, distinction between instruments for bio-signals e.g. ECG, EMG, EEG and evoked
wound rotor and cage rotor, cases of multiple cages, energy responses. Biomedical transducers for pressure, flow and
efficient motors, synchronous motor theory-equivalent circuit, temperature. Biomagnetic measurement and imaging. Cardiac
extensions as reluctance motors, and permanent magnet output measurement techniques. Dignostic and therapeutic
motors. Stepper motor features and operation. Speed control instruments. Prosthetic devices like pacemaker, hearing-aid
of induction motor-basic issues, the ac power controller, and and myoelectric arm. Functional electrical stimulation and
slip energy recovery schemes. VSI and CSI fed induction algorithms for extremity control. Biotelemetry of biological
motors. Speed control of synchronous motors and associated signals, biosensors. Neonatal monitoring. Special aspects such
machines. Organisation of micro-controllers, key issues like as safety of medical electronic equipment. Telemedicine,
actuation and signal sensing, interrupt handling, timing, and biotechnology and nanotechnology.
priority of tasks in a microcomputer controlled drives.
EEL315 Analog Integrated Circuits
EEL306 Communication Engineering 3 credits (3-0-0)
4 credits (3-1-0) Pre-requisites: EEL 204 & EEL 202
Pre-requisites: EEL205 Review of basic amplifiers. Current Mirrors, Reference
Review of Fourier Series and Transforms. Hilbert Current and Voltage Sources. CMOS Operational Amplifier:
Transforms, Bandpass Signal and System Representation. Structure, Analysis and Design, Frequency Response and
Random Processes, Stationarity, Power Spectral Density,
Compensation Techniques. Switched Capacitor Circuits:
Gaussian Process, Noise. Amplitude Modulation, DSBSC,
Principles of operation, Filter and non filter applications.
SSB, VSB: Signal Representation, Generation and
Sample and Hold Circuits, Comparators. ADC:
Demodulation. Frequency Modulation: Signal Representation,
Characterization, Types of ADC and their relative merits and
Generation and Demodulation. Mixing, Superheterodyne
demerits, Design issues. DAC: Characterization, Types of
Receiver, Phase Recovery with PLLs. Noise: in AM Receivers
DAC and their relative merits and demerits, Design issues.
using Coherent Detection, in AM Receivers using Envelope
Detection, in FM Receivers. Sampling, Pulse-Amplitude EEL316 Digital Communications
Modulation. Quantization, Pulse-Code Modulation. Noise 4 credits (3-0-2)
Considerations in PCM, Time Division Multiplexing, Delta Pre-requisites: EEL306
Modulation. Matched Filter, Error Rate due to Noise. Intersymbol
Interference, Nyquist’s Criterion, Duobinary Signaling.
EEL308 Computer Architecture
Optimum Linear Receiver. Geometric Representation of
4 credits (3-1-0)
Signals. Coherent Detection of Signals in Noise, Probability
Pre-requisites: EEL201
Overlaps with: CSL211 of Error. Coherent Digital Modulation Schemes: MPSK, MFSK,
Organization of a Computer: von Neumann and Harvard MQAM; Error Analysis. Noncoherent FSK, Differential PSK.
architecture; Instruction Set Architecture: RISC and CISC Comparison of Digital Modulation Schemes, Bandwidth
processors; Computer Arithmetic: fixed point and floating Efficiency. Pseudo-Noise Sequences and Spread Spectrum.
point arithmetic; Design of ALU: hardware algorithms for Information Theory, Entropy, and Source-Coding.
addition, multiplication and division of fixed point and floating EEL319 Digital Signal Processing
point numbers; Processor design: Data Path and Control 4 credits (3-0-2)
Design, Microprogramming, Exception Processing, Pre-requisites: EEL205
Pipelining; Memory Organisation: memory hierarchy, cache Review of Signals and Systems, Sampling and data
organization, virtual memory; System Design: bus structure, reconstruction processes. Z transforms. Discrete linear
88
Electrical Engineering
systems. Frequency domain design of digital filters. Pass transistors. Designing Logic gates in CMOS. CMOS
Quantization effects in digital filters. Discrete Fourier sequential circuits. Timing issues, Basic CMOS technology,
transform and FFT algorithms. High speed convolution and Layout design rules and CMOS gate layout, Circuit and Logic
its application to digital filtering. simulation. Layout generations- partitioning, placements and
routing.
EEL322 Integrated Circuits Technology
3 credits (3-0-0) EEL330 Selected Topics in Communication
Pre-requisites: EEL204 Engineering - I
Fabrication of active and passive devices and integrated
3 credits (3-0-0)
Pre-requisites: EEL306
circuits. Basic technological steps – pattern definition, impurity
Topics of recent interest in the area of Commnication
introduction, layer deposition, etching. Simplified process Engineering.
sequences for bipolar, NMOS and CMOS.
EEL331 Electromagnetics and Advanced
EEL324 Digital Hardware Design Electromechanics
3 credits (3-0-0) 3 credits (3-0-0)
Pre-requisites: EEL201 Pre-requisites: EEL203
Overlaps with: CSL316 Review of electromagnetic field concepts, Maxwell’s
Review of combinational and sequential logic; Finite state equations for quasi-stationary fields. Boundary values
machines and optimization of finite state machines; problems in electrostatics: Laplace and Poisson’s
Hardware Description Languages (HDL), HDL based design; equations. Solutions in rectangular, spherical and cylindrical
Introduction to data path and control path synthesis; coordinates: method of Images: field plotting. Conformal
Asynchronous state machine based design; Considerations transformation techniques, numerical methods: finite
of technology; testability and fault-tolerance in design. difference methods, finite element based software.
Magnetostatic fields - vector potential: Boundary value
EEL325 Control Engineering - II problems. Current sheet and flux sheets. Relation between
3 credits (3-0-0) field theory and circuit theory for electric machines. Advanced
Pre-requisites: EEL301 topics in electromechanics, dynamic modelling of D.C.,
Introduction to digital control systems,Principles of signal synchronous and induction machines, d-q transformations.
conversion, sampling and reconstruction. Principle of Transient/dynamic analysis of machines using classical and
discretization. Impulse and step invariance. Finite difference numerical methods. Short circuit studies in synchronous
approximation. Bilinear transformation, Mathematical machines. Effects of saliency, automatic voltage regulators.
models discrete time signals and systems. Transfer function Unbalanced operation of Induction motors. Speed control of
and system response. Stability on the z-domain. Closed loop induction motors.Variable reluctance, permanent magnet and
digital control systems. System with dead time. Commonly stepper motors.
used digital devices. Examples of industrial control systems.
Transform design of digital controllers. Root locus methods EEL338 Antennas and Propagation
and frequency domain method.State variable representation 3 credits (3-0-0)
of continious and discrete time systems. Conversions state Pre-requisites: EEL207
Antennas: Introduction to various types of antennas.
variable models to transfer function models. Conversion of
Fundamentals of electromagnetic radiation, radiation from
transfer function to canonical models. Eigen values and eigen
thin wires and small loops. Different types of linear arrays.
vectors. Solution of state equations. Controllability and
Pattern multiplication, long wire antennas, aperture
observability properties. Pole placement design using state
antennas. Waveguides.
feedback. Dead beat control.
EEL339 Power Conditioning
EEL326 Micromotors and their Applications 3 credits (3-0-0)
3 credits (3-0-0) Pre-requisites: EEL209
Pre-requisites: EEL203 Concepts of nonlinear loads and electric power
Micromotors: dc micromotors: PCB motors, voice conditioning unity power factor rectifier STATCON, (Static
coilmotors, ultrasonic wave motors, coreless motors, PM condenser) SMPS: analysis, design and control. UPS on-
motors, disc motors, servo motors, brushless motors, step line and off-line, power supplies in telecommunication
motors, ac servo motors, synchronous motors, induction systems. High frequency induction heating, dielectric heating
motors, universal motors axial field motors. Applications to Power supplies in automobiles. Passive filters, active filters
information technology equipments, Computers FDD, HDD, for harmonic and reactive power compensation in two wire,
printers and plotters, instruments, Consumers products three wire and four wire ac systems. Harmonic standards,
such as cameras, camcorders, timers, clock, VCR, VCP power quality, surge suppressors, compensation of arc
Wipers, fax machines, casette recorders, copiers etc. furnace and traction loads. Microwave ovens, light and
temperature controllers. Power supplies for appliances such
EEL327 Fault Diagnosis of Digital Circuits as camera, X-ray equipment. Case studies on
3 credits (3-0-0) microcomputer and DSP control in active filters and power
Pre-requisites: EEL201 supplies.
Concepts of faults and fault models; test generation, test
selection, and fault dictionaries. Test generation for fault
EEL340 Selected Topics in Power and
Machines
detection, fault location and fault correction. Some basic
3 credits (3-0-0)
reliability-enhancing design techniques for digital circuits
Pre-requisites: EEL203
and systems. Topics of interest in the relevant areas.
EEL329 VLSI Technology and Design EEL341 Selected Topics in Power Electronics
4 credits (3-0-2) and Drives - I
Pre-requisites: EEL201 3 credits (3-0-0)
Overlaps with: EEL734 Pre-requisites: EEL203 & EEL209
MOS transistors. CMOS and Pseudo NMOS inverters. Topics of special interest in power electronics and drives.
89
Electrical Engineering
90
Electrical Engineering
EEL380 Selected Topics in Electronics - I rotating reference frames, Derivation of equivalent circuits.
3 credits (3-0-0) Correlation of inductances. Run up transients, Dynamics
Pre-requisites: EEL202 and EC 60 under load change, speed reversal and braking. Unbalanced
Topics of interest in areas of electronics; details will be and asymmetrical operation.Modelling and analysis of
provided by the instructor. permanent magnet, switched reluctance and stepper motors.
Development of Computer Software using latest simulation
EEL388 Stepper Motors
tools to predict the behavior of different machines.
3 credits (3-0-0)
Pre-requisites: EEL203 EEL404 Flexible AC Transmission System
Discretisation of angular position by stepper structures, 3 credits (3-0-0)
stepping angle and frequency of excitation. VR and PM rotor Pre-requisites: EEL303
structures and their torque production, torque angle Concepts of reactive power support and voltage stability.
characteristics. The hybrid structure and torque production Compensation at a bus and over a line. The synchronous
by permanent magnet and excitation fluxes. Power electronic condenser, static var compensation, static phase shifter,
converters for stepper motors, control by load angle. Hardware thyristor controlled switched capacitor, STATCON’s and DVR’s,
and software based control. Trajectory and motion definition unified power flow controller, interphase power controller.
in angle and angular speed. Transfer function of stepper Reactive power balance over a network and optimisation.
motors, and control of damping by one-step and one-and-a-
EEL405 Power Engineering Instrumentation
half step excitation.
3 credits (3-0-0)
EEL389 Computer Aided Testing of Electric Pre-requisites: EEL303
Machines The concepts of accuracy and precision, Log errors and
3 credits (2-0-2) sources of measurement errors. Non idealities involved in
Pre-requisites: EEL203 Power instrumentation Instrument transformers, structures of
Data acquisition system, sensors, transducers such as PT’s and CT’s ratio and phase errors. Current probes and
speed torque, temperature, noise, voltage, current, power, their efficiency. DC current measurements by Hall devices,
power factor, harmonics, crest factor etc. Digital signal saturable reactor set, UPS. Electromechanical meters for dc
processing and instrumentation. Recorders, computer and ac measurements-moving coil and moving magnet
interface. Case Studies of Computer Aided testing of different structures. Analog circuits for power instrumentation, voltage
electric machines. followers, buffers, differential amplifiers, specific analog circuits
for peak detection, rms detection, and average computation,
EEL390 Selected Topics in Information and common mode operation and noise analysis of OPAMP based
Communication Technology – I circuits. Filter designs and concepts of operating bandwidth.
3 credits (3-0-0) Digital instrumentation in power application, A/D and D/A
Pre-requisites: CSL201 & EEL205 and EC 60 circuits and their operation, errors Basic concepts of digital
Topics in the emerging areas of information and filtering storage and related circuit design. Microprocessors
communication technology and the interface between the two. in power instrumentation, configuration and software flowcharts
EEL394 Permanent Magnet Motors for basic power measurement involving filtering, arithmetic
3 credits (3-0-0) operations and storage.
Pre-requisites: EEL203 EEL407 Distribution System Planning and
Permanent magnet materials and circuits; Characteristics, Automation
parameters, properties, classification and calculations, 3 credits (3-0-0)
Permanent magnet motors, D.C. brushed motors, design Pre-requisites: EEL303
analysis and control and applications, PM synchronous motors, Configuration of distribution systems load characteristics,
rotor construction such as surface mounted PM, buried PM, distribution transformers, distribution substation design, feeder
inset type PM and interior type PM rotor and cageless rotor design, voltage regulation, protection in distribution systems,
motors, line start and inverter fed control and applications. SCADA, distribution automation.
PM brushless dc motor, theory, operation, control and
applications, axial field disc construction, PM step motors, EEL420 Selected Topics in Electronics - II
hybrid step motors, sensorless control, reduction of torque 3 credits (3-0-0)
pulsations; Case studies such electric vehicles, marine Pre-requisites: EEL202 and EC90
propulsion, spindle drives, commercial and industrial drives, Topics in electronics; details will be decided by the instructor.
PV fed water pumping. EEL421 Selected Topics in Power Electronics
EEL398 Machines and Drives Dynamics and Drives - II
3 credits (3-0-0) 3 credits (3-0-0)
Pre-requisites: EEL203 Pre-requisites: EEL203 & EEL209 and EC90
Topics of current interest in power electronics and drives;
General volt-ampere and torque equations under stationary
details will be provided by the instructor.
and rotating reference frames. Instantaneous symmetrical
components and generalised operational equivalent circuits. EEL422 Computers in Biomedicine
Space vector concepts. Modelling of D.C. machines: analysis 3 credits (3-0-0)
under motoring and generating. Simulation for transient and Pre-requisites: CSL201 and EC 90
dynamic conditions. Modelling of synchronous machines: Introduction to computer simulation in biological sciences.
d-q transformations fixed to field structure-steady state and Simulation of normal and pathological states. Artificial
dynamic equations. Phasor diagram for cylindrical rotor and intelligence and expert systems for medical applications,
salient pole machines-electromagnetic and reluctance Algorithms for automated analysis of bioelectrical signals
torque. Response under short circuit conditions Modelling such as ECG and EEG. Pattern identification and tissue and
of induction machines: Equations under stationary and cell typing. Fractal and chaotic dynamics in biological
91
Electrical Engineering
92
Electrical Engineering
EEL453 Power System Dynamics and Control these architectures.SIMD algorithms-design considerations,
3 credits (3-0-0) masking,vector instructions and data structures.Memory
Pre-requisites: EEL303 allocation techniques.Interconnecting networks.Sorting and
Introduction to power system stability problems, Models of: data broadcasting. Algorithms for shuffle/exchange
synchronous machines, excitation systems, prime mover and networks.MIMD algorithms (shared memory) -
governor, loads, Transient stability analysis, Dynamic stability synchronization,mutual exclusion, hot spots. Distributed
analysis, Dynamic Equivalents, Stabilizers, Levels of power Programming :message passing , RPC and rendezvous ,
system control, AGC, SCADA and Computer control. paradigms for process interaction, implementations.
EEL455 Power System Planning EEL473 Computer Communication
3 credits (3-0-0) 3 credits (3-0-0)
Pre-requisites: EEL303 Pre-requisites: EEL306
Load forecasting, generation system reliability, transmission Overlaps with: CSL 374
system reliability and distribution system reliability. Generation Introduction; Mathematical theory of Networks : birth-death
system expansion planning, Transmission system expansion proceses, M/M/m, M/G/1, simulation techniques for LANs;
planning and distribution system expansion planning, Reactive Local Area Networks, Metropolitan Area Networks, Access
power planning, Integrated power system planning. Techniques, Wide Area Network, Routing algorithms. Case
EEL456 Power Engineering - II studies in network design.
4 credits (3-0-2) EEL481 Testing and Commissioning of
Pre-requisites: EEL303 Electrical Equipment
Integrated operation of power systems, advanced load 3 credits (3-0-0)
flow modelling, advanced fault analysis, stability analysis, Pre-requisites: EEL303
security analysis, optimal power flow, power system control. Testing of Transformers, dc machines, Induction machines
EEL458 Power Systems Optimization synchronous machines and other Electric apparatus. Study
3 credits (3-0-0) of testing standard (BIS and EMC) etc. on electrical equipment
Pre-requisites: EEL303 Type tests and routine tests. Tests before commissioning and
Characteristics of generation units, economic dispatch of after commissioning of electrical equipments. Various testing
thermal plants, unit commitment hydro thermal coordination standards.
maintenance scheduling, emission minimization, optimal EEL482 Mechatronics
power flow, security constrained optimization. 3 credits (3-0-0)
EEL460 Selected Topics in Control Pre-requisites: EEL201 & EEL203 & EEL301
Engineering-II Overlaps with: MEL411, MEL432
3 credits (3-0-0) Mechatronics: definitions and terminology, its elements such
Pre-requisites: EEL301 and EC 90 as mechanics, electronics, microelectronics, power electronics
Topics in control engineering; details will be decided by the and information technology. Mechanical elements with
instructor. integrated electronics suspension systems, vibration dampers,
clutches, bearing mechanical or magnetic, gears etc. Machines
EEL462 Identification and Adaptive Control with integrated electronics, electric drives, pneumatic and
3 credits (3-0-0) hydraulic drives, water steam or gas turbines, combustion
Pre-requisites: EEL301 engines, etc. Generators, pumps, compressors, machines
Review of stochastic process. Models and model tools, robots, printing machines, vehicles: automobiles, ships
classification.The identification problem, some fields of and aircraft. Precision machines with integrated electronics
applications. Classical methods of identification of impulse devices for telecommunication, consumer electronics, data
response and transfer function models, model learning processing devices, sensors, actuators, optical devices and
technique, linear least square estimator, Properties of ISE, medical devices, Power electronics converters.
generalized and weighted least square, Instrumental variable
method. On line identification using recursive least squares, EEL483 Hydro Power Generation
minimum variance algorithm, stochastic approximation and 3 credits (3-0-0)
maximum likelihood method. Simultaneous state and Pre-requisites: EEL303
parameter estimation extended kalman filter, two stage Types of Hydro plants subsystems of hydro plant, turbines,
identification methods. Nonlinear identification, Model hydro alternates hydro plant. Auxiliaries, control of hydro
reference adaptive control. power, micro hydel systems, special problems in hydro plants.
EEL470 Selected Topics in Computers - II EEL486 Illumination and Heating
3 credits (3-0-0) 3 credits (3-0-0)
Pre-requisites: CSL201 and EC 90 Pre-requisites: EEL101 / EEL102 and EC 90
Topics of current interest in the area of Computer Laws of illumination; Types of lamps and fixtures; Energy
Technology; details will be provided by the instructor. conservation measures; Electric heating; Electric welding.
EEL472 Parallel and Distributed Processing EEL487 Intelligent Algorithms for Power
3 credits (3-0-0) Systems
Pre-requisites: EEL308 3 credits (3-0-0)
Overlaps with: CSL830, CSL847, MAL311, Pre-requisites: EEL303
MAL465 Introduction of Artificial Neural Networks (ANN), Multilayer
Motivation for parallel and distributed processing. feed forward networks, back propagation training algorithm,
Classification of Parallel Architectures-SIMD/MIMD,control/ Radial basis function and recurrent networks. ANN based
data flow,distributed/shared memory architectures, Mapping algorithms for: load flow analysis, economic load dispatch,
algorithms onto regular arrays-data dependencies, linear, load forecasting, transient stability, and power system
rectangular mesh and hexagonal arrays and algorithms for stabilizers. Introduction to genetic algorithms.
93
Electrical Engineering
EEL499 Selected Topics in Electrical and Relation with other fields like Data Mining, Information
Machines Retrieval, etc.; Linear Discriminant Functions and its
3 credits (3-0-0) Applications; Bayesian Decision Theory; Maximum-Likelihood
Pre-requisites: EEL203 and EC 90 and Bayesian Parameter Estimation; Component Analysis,
Topics of curent interest related to electrical machines; Expectation Maximisation, Hidden Markov Model; Non-
details will be provided by the instructor. parametric Techniques; Nearest Neighbour, K-NN; Non-metric
EEL702 Computer System Software Methods; Decision Trees, ID3, Grammar based Methods;
4 credits (3-0-2) Neural Network Based Approaches; Introduction to Fuzzy
Pre-requisites: CSL201 & EEL308 Logic Based Techniques; Support Vector Machine;
Overlaps with: CSL728 Applications.
Introduction to Object Oriented Programming and Object EEL710 Coding Theory
Oriented Design. Use of UML in Software design. System
3 credits (3-0-0)
software design issues. Language Translators, Assemblers,
Pre-requisites: EEL306
Linkers and Loaders. Run-time environment management.
Measure of information; Source coding; Communication
EEL703 Computer Networks channel models; Channel Capacity and coding; Block
3 credits (3-0-0) codes; Cyclic codes; BCH codes; Reed Solomon codes;
Pre-requisites: EEL306 Convolutional codes; Trellis coded modulation; Introduction
Overlaps with: CSL374, CSL858 to cryptography.
Introduction to Computer Networks, the Internet and World
Wide Web; Application Layer and network applications; EEL711 Signal Theory
Transport Layer: TCP, UDP and ATM; Network Layer and 3 credits (3-0-0)
Routing; Data Link Layer and Local Area Networks; Physical Pre-requisites: EEL306
Layer and communication media; Network management. Deterministic and random signals; Discrete random
variables (Bernoulli, binomial, Poisson, geometric, negative
EEL704 Robotics and Automation binomial, etc.) and their properties like PDF, CDF, MGF;
3 credits (3-0-0) Continuous random variables: Gaussian, multivariate
Pre-requisites: EEL301 Gaussian; whitening of the Gaussian random vector; complex
Basic component of Robotic systems. Kinematics of
Gaussian random vector, circularity; Rayleigh and Rician;
manipulators, Selection of Coordinate frames,
exponential; chi-squared; gamma; Signal spaces: convergence
Transformations. Solution of kinematics and manipulator
and continuity; linear spaces, inner product spaces; basis,
dynamics. Newton-Euler dynamic formulations. Path planning.
Position, velocity and force control, Computed Torque control. Gram-Schmidt orthogonalization; Stochastic convergence,
Linear and Nonlinear controller design of robot. Introduction law of large numbers, central limit theorem. Random
to robot vision. Application of computer controlled robot in processes: stationarity; mean, correlation, and covariance
manufacturing and programmable automation. functions, WSS random process; autocorrelation and cross-
correlation functions; transmission of a random process
EEL706 Soft Computing through a linear filter; power spectral density; white random
3 credits (3-0-0) process; Gaussian process; Poisson process.
Pre-requisites: MAL220 / MAL250
Overlaps with: MAL717, MAL720, EEL781 EEL713 Microwave Theory and Circuits
Introduction to Soft Computing: Rationale and Basics of 3 credits (3-0-0)
Learning: Neural Networks: Multi-layer Feed-forward Pre-requisites: EEL207
Networks, Recurrent Networks, Self-organising Networks; Review of EM theory: Maxwell’s equations, plane waves in
Fuzzy Logic: Basics, inferencing scheme, Neuro-Fuzzy dielectric and conducting media, energy and
systems; Evolutionary Algorithms: GA and Optimisation, power.Transmission lines and waveguides: closed and
Evolutionary Systems, Genetic Programming; Introduction dielectric guides, planar transmission lines and optical
to Rough Sets, Rough-Fuzzy representations, Belief fibre.Network analysis: scattering matrix other parametrs,
Networks; Principles of SVM; Applications. signal flow graphs and network representation.Impedance
EEL707 Multimedia Systems matching and tuning.Analysis of planar transmission
4 credits (3-0-2) lines.Analysis of design of passive components.
Pre-requisites: EEL205 & EEL358 EEL714 Information Theory
Multimedia Data Types: Image, audio, video, animation;
3 credits (3-0-0)
Compression Technology, System Design: Architecture and
Operating Systems, Multimedia Delivery, Content
Pre-requisites: EEL205
management and retrieval. Entropy, relative entropy, and mutual information.
Asymptotic equipartition property. Entropy rates of a stochastic
EEL708 Information Retrieval process, Markov chains. Data compression: Kraft inequality,
3 credits (3-0-0) Huffman codes. Channel capacity: symmetric channels,
Pre-requisites: CSL201 channel coding theorem, Fano’s inequality, feedback capacity.
Introduction – What is IR; Applications and significance; Differential entropy. The Gaussian channel: bandlimited
retrieval evaluation; Query Modelling and Query Languages; channels, channels with coloured Gaussian noise, Gaussian
Indexing and Searching Text; Multimedia IR; Models, channels with feedback. Rate distortion theory: rate distortion
indexing, searching; User Interfaces and Visualisation; function, strongly typical sequences, computation of channel
Distributed IR; Web Search Engines; Digital Libraries. capacity. Network information theory: Gaussian multiple user
EEL709 Pattern Recognition channels, the multiple access channel, encoding of correlated
3 credits (3-0-0) sources, the braodcast channel, the relay channel, source
Pre-requisites: MAL250 coding and rate distortion with side information, multiterminal
Introduction – What is Pattern Recognition? Applications networks.
94
Electrical Engineering
95
Electrical Engineering
96
Electrical Engineering
EEL862 Selected Topics in Communication commercial, low rating, BJT PWM inverter, and harmonics
Engineering - II analysis of performance.
3 credits (3-0-0)
Pre-requisites: EEL306 and EC 120 EEP211 Design (EE)
Topics of current interest in communication engineering;
2 credits (0-0-4)
details will be provided by the instructor.
Pre-requisites: EEL101 / EEL102
Design activities related to various aspects and applications
EEL863 Selected Topics in Communication of electrical engineering.
Engineering - III
3 credits (3-0-0) EEP221 Design (EP)
Pre-requisites: EEL306 and EC 120 2 credits (0-0-4)
Topics of current interest in communication engineering; Pre-requisites: EEL101 / EEL102
details will be provided by the instructor. Design activities related to various aspects and applications
of electrical power engineering.
EEN110 Introduction to Electrical
Engineering EEP301 Control Engineering Laboratory
2 credits (0-0-4) 1.5 credits (0-0-3)
Discussion with faculty about different aspects of Electrical Pre-requisites: EEL301
Engineering; practical sessions on Electrical Components, First and Second Order Electrical Systems, A.C and D.C
Circuit drawing, PCB design, Winding of transformer, assembly Servo Motors, Synchro Characteristics, D.C Integral Servo
of a motor, disassembly of a computer, assembly of electronic Systems, Characteristics of Hydraulic Servo, Amplifier and
circuits like audio amplifier, radio receiver/transmitter, etc. Servo motor, Pneumatic Process Controller, Process Control
Simulator, Microprocessor based speed control of stepper
EEN120 Introduction to Electrical motor.
Engineering (Power)
2 credits (0-0-4) EEP303 Power Engineering Laboratory
Discussions with faculty about different aspects of Electrical 1.5 credits (0-0-3)
Power Engineering, practical sessions on electrical Pre-requisites: EEL303
components, circuit drawing, PCB design, winding of a Experiments related to EEL303 Power Engineering - I.
transformer, assembly of a motor, etc. EEP305 Drives Laboratory
EEP201 Electronics Laboratory - I 1.5 credits (0-0-3)
1.5 credits (0-0-3) Pre-requisites: EEL305
Pre-requisites: EEL101 / EEL102 Experiments related to course EEL305 Electric Drives.
The laboratory is divided into two parts. In the first part, the EEP306 Communication Engineering
student is required to perform some set experiments to Laboratory
familiarize himself/ herself with basic digital electronic 1.5 credits (0-0-3)
techniques. In the second half of the semester, the student is Pre-requisites: EEL306
required to design and fabricate a digital module. A formal Laboratory experiments on analog, pulse, and basic digital
presentation of the design is required at the end of the modulation and demodulation techniques.
semester.
EEP307 Electromagnetics Laboratory
EEP203 Electromechanics Laboratory 1.5 credits (0-0-3)
1.5 credits (0-0-3) Pre-requisites: EEL207
Pre-requisites: EEL203 Laboratory experiments on different transmission lines,
Experiments on Transformers, DC and AC machines. antennas, microwave sources and passive devices.
EEP204 Electronics Laboratory - II EEP308 Computer Technology Laboratory
1.5 credits (0-0-3) 1.5 credits (0-0-3)
Pre-requisites: EEL101 / EEL102 Pre-requisites: EEL201 & EEP201
To design and test single stage and multi stage amplifiers, Overlaps with: CSL211
power amplifiers and oscillators on bread board. The students Laboratory Experiments will be on: (a) Use of ALU; (b)
will be given the specification and the design to be verified Design and implementation of special purpose hardware for
before wiring up the circuit. The students are encouraged to application specific computation, like HCF; (c) Design and
trouble shoot with hints from the instructor and TAs. implementation of interfacing hardware, eg. Serial I/O; (d)
EEP209 Power Electronics Laboratory Assembly Language programming and interfacing experiment
1.5 credits (0-0-3) with microprocessor/microcontroller kit; (e) Use of Hardware
Pre-requisites: EEL209 Description Language like VHDL; (f) Controller synthesis on
FPGA.
Experiments on measurement of turn on and off
characteristics of various devices on storage CRO computation EEP321 Measurements and Instrumentation
of losses. Assembly and testing of converters and inverters Laboratory
on resistive and inductive loads. Fabrication and testing of 1.5 credits (0-0-3)
firing circuits, base and gate drives. Study of turn on and turn Pre-requisites: EEL212
off characteristics of junction and MOS devices Performance The laboratory is divided into two parts. In the first part, the
of low rating boostand buck converters Design and Testing of student is required to perform some set experiments to
firing circuits for: (a)Thyristorised boost/buck converters.(b) familiarize himself with basic electronic techniques. In the
BJT/IGBT based boost/buck converters Phase controlled second half of the semester, the student is required to design
operation of a six pulse thyristorised converter, and and produce a demonstrable instrument, together with its
harmonics analysis of performance. Performance study of a operating and maintenance manual.
97
Electrical Engineering
98
Electrical Engineering
99
Department of Humanities and Social Sciences
HUL101 English in Practice equalizations theorem. New theories of trade. Economic
3 credits (2-0-2) growth and trade. Effects and sources of growth. Rybczynski
Verb structures and patterns, avoiding common errors, theorem. Technical progress. Gains from trade and trade policy.
vocabulary building, spelling patterns, developing writing skills Tariffs and quotas. Metzier paradox. Stopler-Samuelson
(composition, letter writing) etc. developing listening skills. theorem. ERP. Domestic distortions. Infant industry argument.
Foreign direct investments. Multinational corporation.
HUL211 Introduction to Economics International monetary economics. Balance of payments.
4 credits (3-1-0) Exchange rates-fixed versus flexible. Devaluation. Elasticities
Pre-requisites: HUN100 approach. Absorption approach. Monetary approach. Internal
Current economic problems. Alternative economic systems. and external balance.
An overview of the economy. The market mechanism. National
product and income. Consumption, savings and investment. HUL215 Econometric Methods
Determination of national income. Aggregate demand and 4 credits (3-1-0)
supply. Fiscal policy. The nature of money and monetary policy. Pre-requisites: HUN100
Inflation and unemployment. Basic concepts of price theory. Definition, scope and methodology of econometric research.
Determination of price by supply and demand. Elasticity of Estimation and testing of hypotheses. Simple linear regression.
demand and supply. Theory of production. Theory of costs. OLS and its properties. Gauss-Markov theorem. Statistical
Pricing in competitive and monopoly markets. The gains from tests of significance. Multiple regressions. Statistical tests.
international trade. Theory of exchange rates. Balance of Heteroskedasticity. Autocorrelation. Multicollinearity.
payments. Economic growth, and development. Inequality and Distributed lagged models. Pooling of time series and cross-
poverty. section data. Simultaneous equation systems. Identification
problem. Estimation methods. ILS, 2SLS. Qualitative and
HUL212 Microeconomics limited dependent variables. Maximum likelihood methods.
4 credits (3-1-0) Forecasting.
Pre-requisites: HUN100
Micro versus macroeconomics. Theory of consumer HUL216 Indian Economic Problems and
behavior and demand. Consumer preferences. Indifference Policies
curve. Consumer equilibrium. Demand function. Income and 3 credits (2-1-0)
substitution effects. The Slutsky equation. Market demand. Pre-requisites: HUN100
Elasticities. Average and marginal revenue. Revealed Performance of the Indian Economy since 1951. Agricultural
preference theory of firm. Production functions. Law of variable growth in India. Inter-regional variation in growth of output and
proportions. Laws of return to scale. Isoquants. Input productivity. Institutional changes. Technological changes.
substitution. Equilibrium of the firm. Expansion path. Cost Farm price policy. Food situation. Recent trends in industrial
function. Theory of costs. Short Run and Long run costs. growth. Industrial and licensing policy. Growth of private sector.
Shape of LAC. Economies and diseconomies of scale. Market Problems of public sector units. Industrial sickness. Policy
equilibrium under perfect competition. equilibrium under changes for industrial growth. Economic reforms and
alternative forms of market. Monopoly: pure and liberalization. Population growth. Unemployment and
discriminating. Monopolistic competition. Oligopoly. underemployment in India. Main trends in imports and exports.
Balance of payments position in recent years. Foreign capital.
HUL213 Macroeconomics Indian planning: strategy and objectives. India’s five-year plans.
4 credits (3-1-0) Regional planning. Saving and capital formation. Poverty in
Pre-requisites: HUN100 India. Income inequalities in India. Environmental problems.
Major economic problems. National income accounting.
Expenditure and income approaches to GNP. Measuring HUL231 An Introduction to Literature
inflation and unemployment. Determination of the equilibrium 4 credits (3-1-0)
level of income. Consumption function. Investment demand.
Pre-requisites: HUN100
What is literature? This is the central question that the
Aggregate demand and equilibrium output. The multiplier
course will address through representational readings from
process. Government sector. Fiscal policy. Tax receipts and
different genres. The focus will be less on any given genre
Transfer payments. Foreign spending. Money, interest and
and more on how it becomes possible for the student to
income. Functions of money. Definition of money. Reserve
reconstruct something called ‘literature’ through the variety
Bank of India and Commercial Banks. Creation of money. The
of genres to which he or she is exposed. The course does
instruments of monetary control. The demand for money.
not presuppose any knowledge of literature though students
Investment expenditure and rate of interest. The IS curve.
will be expected to have a strong command of the English
Money market and the LM curve. Liquidity trap. The IS-LM
language. The actual texts chosen to illustrate the different
model. Derivation of the aggregate demand curve. Monetary
forms of literature will not be restricted to any particular culture
and fiscal polices. Keynesian versus monetarist views. The
but will be open ended to include any text that will help the
aggregate supply function: Keynesian and classical. Inflation
class to answer the question of what constitutes the essence
and unemployment. Stagflation. The Phillips curve. The long-
of literary representation.
run Phillips curve. Inflation expectations. The rational
expectations. HUL232 Modern Indian Fiction in Translation
4 credits (3-1-0)
HUL214 International Economics Pre-requisites: HUN100
4 credits (3-1-0) To study the need, the scope and the processes of literary
Pre-requisites: HUN100 translation, with particular reference to the multilingual nature
Trade determination theories. Absolute and comparative of Indian society and the predicaments of the bilingual writers
advantage. Hackscher-Ohlin theorem and factor price in India. Students will be encouraged to work with at least
100
Humanities and Social Sciences
some texts of their own choice and to present their work in after the modernist era. Much of this fiction is an attempt to
an acceptable format. A preliminary list of the possible texts shake off the excessive sense of despair that characterized
will be circulated. This list will be open-ended as it will grow the modernists. It is also preoccupied with the aftermath of
and evolve according to the preferences and the inclinations World War II, the cold war, the great ideological debates
of the people who are actually doing the course. between capitalism and communism, and the return to realist
modes of narration despite the persistence of modernist
HUL233 American Literature
aesthetics. Representative texts will be examined at length to
4 credits (3-1-0)
Pre-requisites: HUN100 understand and work through the issues listed above.
This course aims to acquaint students with a broad spectrum HUL238 Modern Fiction
of issues in the culture of the United States that are reflected 4 credits (3-1-0)
in its literature. It will include texts written by both white and Pre-requisites: HUN100
coloured peoples of the United States including slavery and This course is quite demanding in that it expects students
immigration narratives. Selections of texts include those to have not only an excellent command of the English language
pertaining to the culture of New England Puritanism, The but a preoccupation with the nature of language per se. Since
American Renaissance, Modernism, Postmodernism, etc. It the very essence of modernist aesthetics is based upon a
will also look at the relationship between the categories of preoccupation with the combinatorial possibilities of language
race, class and gender as critical tools and examine how these as opposed to referential or instrumental forms of linguistic
tools force us to revaluate the relationship between culture expression, only students with an excessive capacity for both
and literature. It will also address the perennial question of existential and linguistic self-reflexivity will enjoy the study of
the American Dream and the representation questions that modern fiction. Amongst the writers who will be read include
this notion gave rise to. Hardy, Joyce, Lawrence and Nabokov though others may also
HUL234 Language and Communication be included if time permits.
4 credits (3-1-0) HUL239 Indian Writing in English
Pre-requisites: HUN100 4 credits (3-1-0)
This course builds the skill sets needed to understand the
Pre-requisites: HUN100
basics of both language and communication. It is also
The problem of identity as it emerges in Indian English
interested in exploring the relationship between the two
literature during the nation’s struggle for freedom and
categories (language and communication) in order to work
thereafter. The breakdown of the joint family in the wake of
out how they relate to each other. It will include introductory
independence and its far-reaching consequences. The age-
concepts in semantics, semiotics, syntax, lexicography, and
old conflict between arranged marriages/marital bliss and
discourse analysis. It will also include an analysis of
romantic love as a major preoccupation of the Indian writer.
philosophical problems of reference, representation, rhetoric,
sense, speech acts, and textuality. Students will have to submit The problem of guilt in man torn between a sense of duty
a term paper and make an oral presentation on any aspect of toward family and his need to break away from it for self -
language and/or communication that they wish to explore at fulfillment. The impact of the West on Indian society and mind,
length. Workshops are also included to help students and its various manifestations in Indian fiction in English as it
internalize the concepts of communication to which they have exists now in courses of study.
been introduced. HUL240 Indian English Poetry
HUL235 Technical Communication 4 credits (3-1-0)
4 credits (3-1-0) Pre-requisites: HUN100
Pre-requisites: HUN100 The aim of this course will be to read the poems of Indian
This course is designed to sensitize students of technology English Writers (pre and post Independence), with specific
to the importance of communication. The topics covered reference to the articulation of their identity. Some of the
include the basic principles and models of communication, perspectives from which the poems will be discussed
stylistic considerations in technical writing, types and formats include the notion of home (childhood, family and ancestors);
of technical documents, the process of writing technical land (history, geography, community and contemporary
reports, graphical representation of technical data, technical politics); language (the dialogue between the different
presentations including the use of media to support technical languages in the creative repertoire of the poets); and culture
presentations and collaborative writing. Students will be (ritual, traditions, legends and myths). The course will also
expected to prepare a technical report and make a short oral look at the differences between the resident and expatriate
presentation. poets vis-a-vis the conflicts and resolutions as expressed in
HUL236 An Introduction to Drama their poems. An attempt will be made to make this list as
4 credits (3-1-0) culturally and linguistically representative as possible.
Pre-requisites: HUN100 Students will be expected to choose one poet and make a
This course will introduce students to problems of both presentation and write an assignment.
dramatic and theatrical representation. It will include readings HUL241 Workshop in Creative Writing
from both ancient and modern drama and engage with some 4 credits (3-1-0)
of the leading theorists of drama from Aristotle to Brecht. Pre-requisites: HUN100
Students will be exposed to the generic differences between Introduces the concept of creative writing through an
the different forms of drama like tragedy, comedy, melodrama, analysis of the techniques of writing and stylistics along with
farce, etc. Students will be encouraged to stage scenes from
explorations in the problem of literary creativity. It also
well-known plays as a part of their assessment.
introduces contemporary writing that is relevant to the areas
HUL237 Contemporary Fiction being discussed in the workshop. Students are invited to write
3 credits (2-1-0) in a genre of their choice. Selected readings in the theory and
Pre-requisites: HUN100 practice of creative writing will be used to brainstorm on what
This course aims to acquaint students with fiction written is involved in acquiring a style of writing.
101
Humanities and Social Sciences
102
Humanities and Social Sciences
organization analysis, an organizational behavior approach. Key thinkers and key perspectives. Science, reform and
The early practice of management. Theories of organization. revolutionary social change. The critics of modernity.
Organizational processes and functions. The structural Implications of these thinkers for social science and society
variables, context and environment of work organization, socio- today.
cultural environment, its impact on organizations. Social
HUL272 Introduction to the Sociology of India
dimensions of organizational behavior: formal/informal
4 credits (3-1-0)
organizations. Group dynamics and teams. Motivational
Pre-requisites: HUN100
processes and theories. Communicational technology and This course focuses on understanding the various
interpersonal processes. Leadership processes and Styles. constructions of Indian society from colonial to contemporary
Decision-making. Behaviour implications of decision-making. times. The structural and cultural dimensions of Indian
Behavior oriented decision-making techniques. Creativity and society are explored through the study of village, region nation
group decision making. and civilization. Castes and tribes, kinship and family
HUL265 Personality and Society systems, the diversity of religious traditions and
organizational forms are explored together with contemporary
3 credits (2-1-0)
issues of secularism communalism, religious conversions
Pre-requisites: HUN100
and caste-based affirmative action. Institutions such as
Coping with stress management. Approaches to the study ‘purdah’ and ‘dowry’ allow the understanding of the social
of personality. Freud’s psychoanalytic theory. Jung’s analytic construction of gender in Indian society.
theory. Adler’s individual psychology, Roger’s person centered
approach, Lewin’s field theory, and Skinner’s operant HUL273 Science, Technology and Society
reinforcement theory. Models of healthy personality, the notion 4 credits (3-1-0)
of the mature person, the self-actualizing person, etc. Yoga Pre-requisites: HUN100
and personality. The problem and value of psychological The socio-cultural context of the rise of modern science
growth. Psychotherapeutic techniques and Eastern and technology. The West European case since Copernicus
psychology. (1473-1543). Transfer of science and technology in the
colonial and post-colonial period of Asia and other
HUL266 Industrial Safety: Psychological developing countries. Science and technology for world
Dimensions transformation. From dependency to creative autonomy
4 credits (3-1-0) issues of scientific culture and technological civilization.
Pre-requisites: HUN100 science and technology in modern India. The colonial
Theories/models of accident causation, psychological experiences. Post-Independence development. Criteria for
factors related to cause and effect of accident. Human errors, choice of development alternatives for India.
human factors in the workplace. Safety and health at work. HUL274 Re-thinking the Indian Tradition
Managing and motivating safety behavior and performance, 4 credits (3-1-0)
prevention and control of industrial hazards. Maintaining Pre-requisites: HUN100
industrial hygiene. Occupational health management. The examination of sources, the structure, the texts and
Employee participation. Training and development of exemplars of the Indian tradition provide the theoretical
employees. Technology and development. Social framework for the discussion of contemporary political and
responsibilities of administrators, system designers, managers. social issues. These are economic development and social
Issues related to waste management and accidents. justice religion and the nation, communalism and
secularism, caste class and gender equity and so on. The
HUL267 Positive Psychology political misuse of tradition in programs of reform and revival
4 credits (3-1-0) both in the past and in modern times will be highlighted to
Pre-requisites: HUN100 underline the need for rethinking tradition in an academically
Positive Introductory and historical overview, Positive serious manner.
Prevention and Positive therapy; Identifying strengths: Positive
directions in diagnosis and intervention; Emotion focused HUL275 Environment, Development and
approaches: Subjective well-being, the concept of flow, Self- Society
esteem, positive affectivity, Emotional intelligence and 4 credits (3-1-0)
emotional creativity; Cognitive-focused approaches: The role Pre-requisites: HUN100
of personal control in adaptive functioning, Well-being, Comparative perspective on the nature-culture-technology
optimism and wisdom; Self-based approaches: authenticity, relationship as embodied in human habitats. Nature as
sustenance and as ‘symbol’; religion, folklore, and ecology.
uniqueness seeking; Interpersonal approaches: empathy,
Indigenous systems of natural resource management, the
altruism, moral motivation and forgiveness; Biological
role of development and technological innovation as sources
approaches: Role of neuro-psychology and biopsychology of change, conflicts over the use of natural resources,
in positive psychology; Specific coping approaches: ethnicity, class and gender. State of environmental resources
Meditation, Yoga and spirituality; Special population and - land, water, forests, air. Development projects and their
setting: Positive psychology for Adolescents and other age environmental implications - Narmada Dam, Green
groups. Positive psychology in a multicultural context and Revolution, Social Forestry, Biotechnology issues feature
setting; The future of the field. among the case studies. Environmental protest movements,
major environmental accords (North-South perspectives).
HUL271 Sociology: The Science of Praxis
Engineering and environmental ethics.
4 credits (3-1-0)
Pre-requisites: HUN100 HUL276 Sociology of Knowledge
The rational organization of knowledge and the emergence 4 credits (3-1-0)
of sociology as a scientific discipline. Industrial society in Pre-requisites: HUN100
Western Europe. Industrialism and its scientific programme. The de-mystification of science as a privileged form of
103
Humanities and Social Sciences
knowledge since Copernicus. Re-examining the laboratory, The development of the field. The systems approach and
the factory and the nation-state, structures linked to the West- multidisciplinary nature of the issue systems, methodology
European model of science. Examining systems deemed and planning for social responsibilities. The social sub-
ethno-science or folk-lore, to set up a dialogue with system and science and technology. The human sub-system
institutionalized science. Comparing science with religion and science and technology. Other methodological aspects.
as forms of knowledge having competing power over human Ethics issues in science and technology.
belief and action. Examining Traditional Knowledge (TK)
systems and their relevance for global economy. HUL286 Social Science Approaches to
Development
HUL281 Mind, Machines and Language 3 credits (2-1-0)
4 credits (3-1-0) Pre-requisites: HUN100
Pre-requisites: HUN100 Historical genesis and theories of development and
What is the role of language in the cognitive sciences? underdevelopment. Comparative paths of development.
What are the implications of conceiving the mind as a Soviet Union, Japan, China. India’s path of planning and
machine (computer)? Can theories about language
socialism: development experience in the post
acquisition help us to understand the ways in which humans
independence period. Explanations of the poor
perceive the world? Finally, how are the three categories
achievements of India’s economy in meeting basic needs
(mind, machine and language) related to each other? These
for several decades after independence. Social indicators
are a few of the fundamental questions that will be posed in
this course. It will benefit any student who wishes to think of development, problems of poverty and inequality. Economic
systematically the cognitive structures that he or she inhabits reforms and liberalization. Panchayati Raj and
but otherwise takes for granted. decentralization. Role of religion, caste and family in
development. Interrogation of the accepted paradigm of
HUL282 System and Structure: An development from the point of view of gender, environment
Introduction to Communication Theory and poverty issues. Appropriate technology and
4 credits (3-1-0) development.
Pre-requisites: HUN100
This course is an introduction to theories of communication HUL287 Industry and Work Culture under
for which there is not sufficient time in the other Globalization
communication courses, which are mainly applied in their 4 credits (3-1-0)
orientation. This is an interdisciplinary course. It will examine Pre-requisites: HUN100
how the notion of communication is used in different The course will focus on the sociological dimensions of
disciplines in the humanities and the social sciences. It will industry under globalization. Changing nature of industrial
intersect with problems of organizational structure, linguistic organization (changes in production processes-horizontal and
structure, interpersonal structure and the problem of what is vertical integration), emergence of new industries, changing
involved in changing a structure. This course will include no rhythms and forms of work, the work culture and the decline
components of remedial English, business correspondence of organized industry; the growing importance of the informal
or skill building activities. Only those really interested in sector and the implication of these changes for family and
theoretical questions should enroll. society will be discussed. The transnational nature of much of
HUL283 Industrial Organizations contemporary industry-new phenomena such as out sourcing,
4 credits (3-1-0) call centers etc, Industry and global governance (WTO) the
Pre-requisites: HUN100 new international division of labor. Education and industry
Individuals, organization and their interaction. The linkages, rise of the consumer society and its sociological
development of individual organization relationships: Choice. implications for industry.
Adaptation development processes. Influence on work HUL288 Science and Humanism: Towards a
behavior: structural factors. Structure and context in Unified World View
organizational design. Design of work. Influence on work 4 credits (3-1-0)
behavior: organizational practices and social processes. Pre-requisites: HUN100
Evaluating and rewarding work effectiveness. Social Introduction and orientation to the development of science
influences on members and work effectiveness. Improving up to the 19th century and the concomitant worldview.
organizational effectiveness: methods and goals of Traditional conflict between science and religion - its causes
organizational change. Organizational renewal process. and consequences. Role of science as a promoter of human
HUL284 Participative Management values. Humanism and its true basis. New paradigm
4 credits (3-1-0) emerging from the 20th century Developments in science
Pre-requisites: HUN100 and the implications of the complementarity of science and
Participative management: historical development, humanism- the need for inner development. Education,
philosophy, theoretical framework. Psychosocial factors in development, and planning with the new unified worldview.
participative management as an industrial relations system.
HUL289 Macro Perspective on Science,
Technology for participative management systems.
Technology and Human Development
Participative management in India: its successes and
4 credits (3-1-0)
failures. Implementation strategy in the Indian context.
Pre-requisites: HUN100
Participative management and job design. Participative
The dynamics of scientific discovery, technological
management as a strategy for quality of work life.
innovation and its application to the human scene. Case
HUL285 Social Responsibilities of Scientists histories of some recent developments in physical and
and Technologists biological sciences and their impact on communications,
4 credits (3-1-0) health care, education and defence, interlinking issues such
Pre-requisites: HUN100 as protection of the environment and avoidance of potential
The concept of social responsibilities and its relevance. catastrophes arising out of side effects, techniques of conflict
104
Humanities and Social Sciences
analysis and resolutions of Indian thinkers to the Indian context. Here we will discuss, for example: Patent
development and application of these techniques, the Laws, Gender Issues, Environmental Ethics, Design(er) and
respective roles of the individual and the social organizations Person(al) Technological Aesthetics, Technologies for the
in anticipating and solving problems as well as in optimizing Disabled, Educational Technologies.
the application of science and technology towards human
development. HUN100 Introduction to Humanities and
Social Sciences
HUL290 Technology and Culture 1 credit (1-0-0)
4 credits (3-1-0) This introductory course will expose students to the basic
Pre-requisites: HUN100 concepts, debates, issues, ideas, and the problems of
To examine the relationship between technology and
methodology in the different disciplines of Humanities and
culture through a consideration of modern/current
developments in various specific areas: e.g. Biotechnology Social Sciences like Economics, English, Philosophy,
and Medicine, IT, AI & Robotics, Fashion Technology, Magic Psychology, and Sociology.
Technology, Communications, Defense and Space HUP102 Psychology Laboratory
Research. 1 credit (0-0-2)
To focus on the roles played by the IITs themselves in To familiarize students with psychological concepts
creating ‘knowledge societies’ - that is, in influencing, through practical training in a laboratory through experiments
formulating and envisioning the links between technological pertaining to cognitive psychology, environmental psychology
‘solutions’ and socio-cultural ‘problems’ especially in the and physiological psychology.
105
Department of Management Studies
SML100 Introduction to Entrepreneurial Ventures SML303 Cost Analysis and Control
4 credits (3-1-0) 4 credits (3-1-0)
Nature, Need, Scope and Characteristics of
Pre- requisites: EC 60
Meaning, nature and managerial need of cost analysis. Cost
Entrepreneurship. Indian Economic and Industrial Heritage and
concepts and cost classification relating to income
Entrepreneurial Development. Current economic and Industrial determination, profit planning, control and decision-making.
environment with special reference to Entrepreneurial Ventures.
Elements of costs-material, labour and overheads.
Choice of Technology. Allocation, absorption and apportionment of overheads;
methods of allocation of overheads.
The need, scope and approaches for Project Formulation,
Biography of Indian Entrepreneurs. Cost accounting systems-process and job (contract, unit
and operating). Costing for joint products and by-products.
Elements of Production Process. Production Planning. Full costing system. Variable costing, differential costing and
Leadership. Group Dynamics. Time Management. Elements decision-making. Budget and budgetary control; preparation
of Technical Entrepreneurship. Understanding Human Behavior. of operating budgets, fixed and flexible budgets, cash budget.
Cost-volume-profit relationship and profit planning. Standard
Achievement Motivation. Creativity- coping with uncertainties.
costing and variance analysis.
Attitude towards Wealth and Work. Small-Medium-Large scale
enterprise linkage. SML304 Introduction to Marketing Management
4 credits (3-1-0)
SML101 Management Concepts and Techniques Pre- requisites: EC 60
- An Introduction Marketing Orientation; Consumer Behaviour; Segmentation;
4 credits (3-1-0) Forecasting product life cycle; Product decision; Pricing
Introduction to Management Theory; the system approach decision; Promotion; Distribution; Sales management;
to management. Systems methodology. Management style. Marketing Information Systems; Market Planning and Control;
Managers and their external environment. Introduction to Market Research; Cases and Exercises.
planning: Nature and scope of planning, Type of planning, Long SML305 Organization of Engineering Systems
and short-term plans. Decision-making. Systems approach to and Human Resources Management
decision-making. 4 credits (3-1-0)
Pre- requisites: EC 60
Organizing: Basic departmentation. Line and staff authority
Understanding organization. Concerns of organizing
relationships. Functions of leadership, Nature of leadership, engineering business and systems: Structure, processes,
Control: The system and process of control, Control techniques, design issues in running engineering organization, operating
Control of overall perfomance. organization. Cybernetics, and socio-technical systems, issues
of efficiency and excellence: Man-machine relationship,
Introduction to functional areas of management: Operation
concerns of recruitment, selection, skill formation and
Management, Financial Management, Marketing Management,
redeployment, developing teams and leadership.
Human Resources Management and Organization Understanding motivation and human resources planning.
Management. Indian Industrial law; Managing industrial relations.
SML301 Entrepreneurial Operations SML306 Manufacturing Systems Management
4 credits (3-1-0) 4 credits (3-1-0)
Pre- requisites : EC 60 Pre- requisites: EC 60
Entrepreneurship in India; The Operating cycle; Market Overlaps with : MEL421, MEL322
Segmentation; Market Research; Test Marketing; Essentials Essentials of Manufacturing Management, Manufacturing
of Costing & Pricing; Working Capital Management; Break even Systems Classification, Operations Capacity Planning; Facilities
Analysis; Product Development; Production Planning and Design-Location, Layout & materials handling; Assembly line
Control; Materials Management; Selection and Recruitment Balancing; Organizing Conversion System; Productivity
Group Dynamics; Delegation; Industrial Policy; Project Improvement Techniques; Scheduling Production & Service.
Identification; Techno Economic Feasibility Report. Systems, Production Planning & Inventory Control, Material
Requirements Planning; Quality Management; Advanced
SML302 Entrepreneurship Management Manufacturing System-Introduction to FMS, JIT; CIM, WCM;
4 credits (3-1-0) Maintenance Management, Applications of Operations
Pre-requisites : EC 60 Research Techniques to Manufacturing Systems Management.
Self employment need and mode. Structural base of Indian Case Studies.
economic life. Industrial sector in the national developmental SML307 Information Systems for Managerial
life. Indices of technical entrepreneurship. Opportunity Decision-making
identification and opportunity generation for technical 4 credits (3-1-0)
entrepreneurship. Problem solving, decision-making, conflict Pre- requisites : EC 60
and change in a new industrial enterprise. Systems Role of Information in Managerial decision-making;
consideration in an entrepreneurial venture. Management Information Needs for various Levels of Managerial Decision
reporting and information systems of a new business enterprise. makers; Computer Based Information Systems-Office
Preparing for an entrepreneurial career. Issues in resource Automation Systems; Transaction Processing Systems;
management. Managing innovations. Functional Information Systems, Information Systems Planning,
106
Management Studies
Design & Implementation; Structured Systems Analysis & budgets. Time value of money. Cost of capital and capital
Design; Object oriented Design; Evaluation of an Information budgeting. Determinants of working capital and its
Systems; Introduction to Decision Support Systems; User measurements. Cash management. Receivables management.
Involvement & End User Computing. Case Studies. Introduction to International Finance; Risk Management in
SML401 Managerial Accounting and Financial International Operations.
Management SML402 Industrial Marketing Management
4 credits (3-1-0) 4 credits (3-1-0)
Pre- requisites : EC 90 Pre- requisites : EC 90
Overlaps with: SML303 Fundamentals of Industrial Marketing: Industrial Buyer
Accounting principles underlying preparation of financial Behaviour Models: Decision-making Units; Technology and
statements, Managerial uses of financial data. Ratio analysis Marketing; System Selling; Role of Service; Intangibles in
and interpretation of financial statements. Cost Concepts. Cost Industrial Marketing, Derived Demand Methodologies;
volume-profit relationship and profit planning. Break even Globalization; Contract Review; Selling; Strategies for
analysis. Incremental analysis and managerial decisions. Diversification; Market Planning and Direct Restructuring;
Budgetary control system and preparation of various types of Marketing Strategy; Case Studies.
107
Department of Mathematics
MAC450 Colloquium (MT) functions, intermediate-value theorem. Compactness in
3 credits (0-3-0) metric spaces.
Pre-requisites: registered for MAT450
Differential, differentiability, Leibniz rule, Taylor theorem,
Students will present seminars on topics of their interest
indeterminate forms, Extrema of functions. Riemann integral:
including one on the training taken in the previous summer.
Properties, Fundamental theorem of integral calculus.
MAD35O Mini Project (MT) Applications to arc length, volume and surface area; Improper
3 credits (0-0-6) integrals. Limit and continuity of functions of several variables.
Pre-requisites: EC 80 Partial derivative and total differential. Composite functions;
Design/fabrication/implementation work under the guidance equality of mixed derivatives; Taylor’s theorem; extrema and
of a faculty member. Prior to registration, a detailed plan of saddle points; implicit functions, Jacobian.
work should be submitted by the student to the Head of the
Solution of dy/dx = f(x, y); linear differential operator L, higher
Department for approval. order ordinary differential equation with constant coefficients:
MAD851 Major Project Part 1 (MT) Wronskian, solution space; Euler’s equation; boundary value
6 credits (0-0-12) problem; initial value problem – existence and uniqueness
Pre-requisites: EC 165 theorem.
A student will take up project under the guidance of a faculty MAL115 Multivariable Calculus and Matrix
member in an area of the student’s choice. Projects are to be Theory
executed individually. 4 credits (3-1-0)
MAD852 Major Project Part 2 (MT) Overlaps with: MAL110, MAL111
14 credits (0-0-28) The Riemann integral definition and properties. The
Pre-requisites: MAD851 fundamental theorem of integral calculus, applications and
Students will continue with the projects taken up in the first improper integrals; Gamma function. Existence properties,
part, MAD851, under the guidance of the same faculty member. Sequence and series of functions, Power series, Properties
of functions represented by power series, Fourier series.
MAD853 Major Project Part 1 (MT)
4 credits (0-0-8) Scalar and vector valued functions of several variables:
Pre-requisites: EC 165 limits, continuity, partial derivatives, differentiability, Jacobian,
A student will take up project under the guidance of a faculty Implicit differentiation, gradient and directional derivative,
member in an area of the student’s choice. Projects are to be Taylor’s theorem in one and several variables, maxima and
executed individually. minima, constrained extrema and Lagrange multipliers.
MAD854 Major Project Part 2 (MT) Multiple integrals: definitions, properties, evaluation and
16 credits (0-0-32) applications of double integrals (in Cartesian and polar
Pre-requisites: MAD853 coordinates) and triple integrals (Cartesian, cylindrical and
Students will continue with the projects taken up in the first spherical coordinates), line integrals, Green’s theorem; Proof,
part, MAD853, under the guidance of the same faculty member. first and second forms, Applications, Surface integrals, Gauss
theorem; proof and extensions; Volume integrals, Stokes’
MAL110 Mathematics - I theorem; Proof and applications.
4 credits (3-1-0)
Overlaps with: MAL111, MAL115 Row reduced Echelon matrices, rank of a matrix, systems
Taylor’s theorem and infinite series. Fundamental theorem of linear algebraic equations, Eigen values and Eigen vectors.
of integral calculus. Applications of definite integral to area, Diagonalization of matrices, Hermetian, Unitary and Normal
arc length, surface area and volume. Differential calculus of matrices, Bilinear and Quadratic forms.
functions of several variables with applications; Maxima and MAL120 Mathematics - II
minima; Ordinary differential equations of first and higher order; 4 credits (3-1-0)
Series solution for Legendre and Bessel equations. Laplace Overlaps with: MAL122, MAL124
transform. Vector Field Theory: Vector calculus, arc length, directional
Rank and inverse of a matrix, consistency of linear system derivative, gradient, curl, divergence, line and double integral,
Green’s theorem, surface integral, triple integral, Gauss and
of equations; Eigen values, Eigen vectors and their applications
Stokes’ theorems with applications.
to system of ordinary differential equations; Cayley-Hamilton
theorem; Diagonalization of matrices. Complex analysis: Limit and derivative of a function, analytic
function, Cauchy-Riemann equations, elementary functions,
MAL111 Introduction to Analysis and
line integral, Cauchy’s integral theorem, Cauchy’s integral
Differential Equations
formula, derivatives of analytic function, convergence of
4 credits (3-1-0)
sequence and series, power series, Taylor series, Laurent
Overlaps with: MAL110, MAL115
series, zeros and singularities, residues and residue theorem,
Product of sets; mappings and their compositions;
evaluation of real integrals, Conformal mapping, Linear
denumerable sets’ upper and lower bounds, supremum,
fractional transformations, mapping by elementary functions.
infimum.
Fourier series, Fourier integrals and Fourier transforms.
Metric spaces: Definition and examples, open and
closed subsets; neighborhoods, interior, boundary, MAL122 Real and Complex Analysis
closure, diameter of a subset, boundedness, 4 credits (3-1-0)
separability. Convergence and limit of a sequence, Cauchy Overlaps with: MAL120, MAL124
sequence, complete spaces. Continuous functions, bounded Metric spaces: Definition and examples, open, closed and
108
Mathematics
bounded sets; closure, interior and boundary, convergence Ramsey’s theorem; Basics of Ramsey numbers; Turan’s
and completeness; Bolzano-Weierstass theorem, theorem and external graph theory; system of distinct
completeness of R, Continuity and uniform continuity, representatives and Hall’s marriage theorem; Harems and
connectedness, compactness and separability. tournaments.
Limits, continuity and differentiability of functions of a single MAL180 Discrete Mathematical Structures
complex variable, analytic functions, the Cauchy-Riemann 4 credits (3-1-0)
equations. Definition of integral, Proofs of Cauchy’s integral Overlaps with: CSL105
theorem, Integral formula and derivatives of analytic functions, Propositional Logic: Language of Propositional logic, truth
Morera’s and Liouville’s theorems, Maximum modulus table, natural deduction, Predicate logic: language of
principle, Taylor’s and Laurent series. Isolated singular points. predicate logic, Logical inference with Quantifiers. Proof
Cauchy residue theorem: proof and evaluation of real integrals. Techniques; Combinatorics: Counting techniques:
Conformal and bilinear mappings. recurrence relation and its application to analysis of
algorithm; Basic Discrete Probability, probabilistic counting.
MAL124 Introduction to Algebra and Matrix Graph theory: Graph as a discrete structure, Modelling
Analysis applications using Graphs, Hamiltonian graphs, Planar
4 credits (3-1-0) graphs, Graph colouring, Network flows, Matching. Algebra:
Overlaps with: MAL120, MAL122 Groups and Examples, Cosets and Normal subgroups,
Group theory: Groups, subgroups, Normal subgroups, Factor Lagrange theorem, cyclic groups, permutation groups, Finite
subgroups, Lagrange theorem, Homomorphism and Abelan groups, Homomorphisms, Matrix groups. Rings,
Isomorphism theorems, Permutation groups, Matrix groups, Ideals, Firleds, Finite fields, Polynomial rings, Unique
Abelian groups. Factorization. Introduction to lattices and Boolean algebra.
Rings and Fields, Ideals, Homomorphism, Euclidean MAL210 Optimization Methods and Applications
domains, Finite and Infinite fields, Polynomial rings Matrix rings. 4 credits (3-1-0)
Pre-requisites: MAL110/ MAL111/ MAL115
Linear Algebra and Matrix Theory: Vector spaces, subspaces, Linear programming problem, SIMPLEX algorithm, duality,
direct sums, bases and dimension, Linear transformation, Matrix transportation and assignment problems. Integer linear
of the linear transformation, Change of basis, Eigen values and programming problem, branch and bound and cutting plane
Eigen vectors, The Characteristic and Minimal polynomials, methods. Karmarkar’s algorithm for linear programming.
Diagonalization. Non-linear programming problem, Karush-Kuhn-Tucker
conditions and duality in non-linear programming, Wolf’s
Finite dimensional inner product spaces, Graham Schmidt method for quadratic programming. Applications of linear,
orthogonalization process, Linear functionals, Adjoints of linear integer and quadratic programming to various areas of
operators. Self-adjoint and normal linear operators. Normal science and engineering. Fuzzy linear programming.
linear spaces, Examples of Banach and Hilbert spaces.
MAL220 Basic Probability and Statistical
MAL140 Probability and Statistics Inference
4 credits (3-1-0) 4 credits (3-1-0)
Overlaps with: MAL220, MAL250 Pre-requisites: MAL110/ MAL111/ MAL120
Probability, Conditional probability, random variables, Overlaps with: MAL140/MAL250
expected value, Specific discrete and continuous distributions, Probability space, Conditional probability, Random variable,
e.g. binomial, Poisson, geometric, Pascal, hypergeometric, distribution function, pmf and pdf, Standard probability
Uniform, exponential and normal, Poisson process, distributions, multidimensional random variables, marginal
Multidimensional random variables, Multinomial and bivariate and conditional probability distribution, independence of
normal distributions, moment generating function, Law of large random variables, bivariate normal and multinomial
numbers and central limit theorem, Sampling distributions, distributions, functions of one and more random variables,
Point and interval estimation, Testing of hypothesis, Goodness Expectation, moments, and moment generating functions,
of fit and contingency tables. Linear regression. correlation, moment inequalities, Markov and Chebychev
inequality, conditional expectation and regression, random
MAL145 Number Theory sums, convergence in probability, Weak Law of Large
4 credits (3-1-0) Numbers, Central Limit Theorem, Sampling Distributions,
Congruences, Arithmetical functions, Theory of partitions, unbiased and consistent estimators, moment and maximum
Diophantine approximations, Binary quadratic forms, likelihood estimators, interval estimation, simple and
diophantine equations, Distributions of primes. composite statistical hypotheses, power of statistical test,
standard statistical tests for population means, variances and
MAL146 Combinatorics proportions, Tests of goodness of fit and linearity of regression.
4 credits (3-1-0)
Overlaps with: MAL147 MAL230 Numerical Methods and Computation
Dilworth’s theorem and external set theory, partitions, latin 4 credits (3-1-0)
squares, Hadamard matrices and Reed-Muller codes, (0,1) Pre-requisites: MAL110/ MAL111/ MAL115
matrices and min-max theorems, codes and designs, Errors in computation, instability. Nonlinear equation in
projective and combinatorial geometries, Polya’s theory of one variable: direct and iterative methods, order of
counting. convergence. Iterative methods for systems of nonlinear
equations. Linear systems of equations direct and iterative
MAL147 Combinatorial Mathematics methods, rate of convergence of iterative methods, ill-
4 credits (3-1-0) conditionedness of systems and condition numbers.
Overlaps with: MAL146 Interpolation: Lagrange, Newton divided difference formula,
Elementary counting; Recursions and generating equispaced Newton’s interpolations, errors in interpolation.
functions; Principle of Inclusion and Exclusion; Inversion Approximation: least square and uniform approximations.
formula; Cayley’s Tree theorem; Colourings of graphs; Differentiation: differentiation using interpolation formulas.
109
Mathematics
Integration using interpolation: Newton-Cotes formulas, Fundamental Theorem for Finitely Generated Abelian
Gauss quadrature rules. Ordinary differential equations: Groups. Sylow Theorems and their applications. Free
Taylor, Euler and Runge-Kutta formulas. Computer groups. Rings and Fields. Principal ideal domains, Euclidean
implementation of the methods. domains, Unique factorization domains. Polynomial rings,
Modules over commutative rings. Field extensions. Splitting
MAL240 Algebra fields. Roots of unity and Cyclotomic field extensions.
4 credits (3-1-0)
Pre-requisites: MAL110/ MAL111/ MAL115/ Normal and separable field extensions. Galois theory.
MAL124 Basic concepts of categories and functors.
Definition and examples of group, rings and fields; MAL260 Boundary Value Problems
Subgroups. Normal subgroups and factor groups, Isomorphism 4 credits (3-1-0)
theorems. Sylow theorems of finite groups and applications, Pre-requisites: (MAL110/ MAL111/ MAL115) &
Fundamental theorem for finitely generated Abelian groups. (MAL120/ MAL122/ MAL124)
Nilpotent and solvable groups. Boundary Value Problems, existence and uniqueness of
Commutative rings, Prime ideals, Maximal ideals, solution, shooting method, finite difference method, orthogonal
Polynomial rings in several variables. Algebraic field set of functions, regular and singular Strum Liouville problems,
extensions, Splitting fields, Finite separable and normal Eigen function expansions, Green’s functions, equivalent
extensions, Fundamental theorem of Galois theory. integral equations and numerical methods for their solution,
analytic and numerical solution of BVPs in PDEs, Ritz Galerkin
MAL245 Topology and Functional Analysis and Collocation Methods.
4 credits (3-1-0)
Pre-requisites: MAL122 MAL311 Parallel Algorithms
Basic concepts of toplogical spaces, continuous functions 4 credits (3-0-2)
and homeomorphisms. Hausdorff, Tychonoff and normal Pre-requisites: MAL230
spaces. Compactness and connectedness. Normed linear Parallel architecture: shared/local memory systems,
spaces and Banach spaces. Hahn-Banach Theorem, Open pipelining, hypercubes, mesh toroidal, etc. Degree of
mapping theorem and Closed graph theorem. Principle of parallelism, speed up (Sp) and efficiency (Ep) of a parallel
uniform boundedness. Hilbert Spaces, orthogonal algorithm. Parallel algorithms: Searching and sorting, prime
complements and direct sums, othonormal sets. Reisz finding algorithm, matrix vector and matrix – matrix
representation theorem, self adjoint, unitary and normal linear multiplication for dense, band and triangular matrices. Parallel
operators. algorithms for direct methods for dense, band and triangular
matrices. Choleski method solving recurrence relations.
MAL250 Introduction to Probability Theory Parallel interactive methods for finite difference equations of
and Stochastic Processes elliptic boundary value problems: point-Jacobi, line Jacobi,
4 credits (3-1-0) block-Jacobi methods, 2-colour and multicolour Gauss-
Pre-requisites: MAL110/ MAL111/ MAL115/ Seidel, SOR, SSOR methods. Domain decomposition method
MAL120/ MAL122/ MAL124 in one and two dimensions. Parallel preconditioned conjugate
Overlaps with: MAL140/MAL220 gradient methods. Quadrant interlocking factorization.
Axioms of probability, Probability space, conditional
MAL335 Differential Equations: Theory and
probability, independence, Baye’s rule, Repeated trials,
Numerical Methods
Bernoulli trials, Random variables: discrete r.v., probability
4 credits (3-1-0)
mass functions, c.d.f., common distributions, continuous r.v.,
Pre-requisites: (MAL115/ MAL110/ MAL111) &
probability density and distributions of r.v., joint distributions, (MAL120/ MAL122 & MAL230)
order statistics, expectation; moments, transforms, conditional Overlaps with: EPL333
expectations, stochastic processes, Markov chains and IVPs for scalar and system of ODEs, existence and
Markov processes (birth, death, etc.), Queuing models. uniqueness, method of solving higher order ode’s with
MAL255 Linear Algebra constant coefficients, Laplace transform and applications to
4 credits (3-1-0) IVPs, regular singular points , Frobenius method, regular
Pre-requisites: MAL110/ MAL111/ MAL115 and singular Strum Liouville problems. Numerical methods
Overlaps with: EPL333 for solving IVPs: Difference equations, Routh-Hurwitz
Finite dimensional vector spaces over arbitrary fields. criterion, Test Equation. Single step methods: Taylor series
method, explicit Runge-Kutta methods, convergence, order,
Linear independence, basis, dimension. Direct sum of
relative and absolute stability. Multistep methods:
subspaces. Linear transformations and their matrices. The
Development of linear multistep method using interpolation
minimal and the characteristic polynomials. Eigen values, and undetermined parameter approach, convergence, order,
eigen vectors and digonalization of linear transformations. relative and absolute stability, Predictor Corrector methods.
The primary decomposition theorem. Rational and Jordan
forms. Inner product spaces. Hermitian, unitary and normal MAL341 File Structures and Information
linear operators. Spectral theorem and polar decomposition. Systems Design
Bilinear and quadratic forms. Digonalization of symmetric 4 credits (3-0-2)
bilinear forms. Pre-requisites: CSL201
Secondary storage media, blocking, buffering, External
MAL256 Modern Algebra sorting techniques, Concept of a file, primary key and
4 credits (3-1-0) secondary key, sequential, Indexed and relative file
Pre-requisites: MAL110/ MAL115/ MAL111 organizations. Updation of indexed sequential and random
Overlaps with: MAL124 access files, Creation and Updation of relative files, dynamic
Monoids, Groups and Group actions. Lagrange’s theorem, hashing techniques, list structure, multiring and inverted files,
Cyclic groups. Linear Groups. Permutation groups. grid files, etc. Introduction to concurrent operations on the
Isomorphism theorems. Automorphisms. Direct products. structures.
110
Mathematics
111
Mathematics
Triangulations of ordinary domains - rectangles, polygons, Paths and Distance in Graphs: distance in graphs, center
circles, ellipses, etc. Finite element problems; conforming and median of a graph, activity digraph and critical path;
and non-conforming methods; Ce’a’s Lemma, Interpolation Hamiltonian Graphs: sufficient conditions for Hamiltonian
on simplexes in Rn, different Lagrange and Hermite finite graphs, traveling Salesman problem; Eulerian Graphs:
elements; Affine, isoparametric,sub-parametric, super characterization of Eulerian graphs, The Chinese Postman
parametric finite elements; Triangulation using isoparametric problem; Planar Graphs: properties of planar graphs, a
mapping; approximation of boundary; Numerical integration, planarity testing algorithms, dual graph, genus of a graph;
construction of element stiffness matrices and assembly Graph Colouring: vertex colouring, chromatic polynomials,
into global stiffness matrix, Skyline method of solution of edge colouring, planar graph coloring; Matching and
finite element equations; Solution of model problems and Factorizations: maximum matching in bipartite graphs,
computer implementation procedures; Asymptotic error maximum matching in general graphs, Hall’s marriage
estimate results; Eigenvalue problems of Laplace operator. theorem, factorization; Networks: The Max-flow min-cut
theorem, max-flow algorithm, connectivity and edge
MAL382 Theory of Automata
connectivity, Menger’s theorem; Graph representations;
4 credits (3-1-0)
Graph searching: BFS, DFS. Basic Graph Algorithms: MST,
Pre-requisites: CSL201
shortest paths, biconnectivity, strong connectivity, etc.
Overlaps with: CSL 705
Finite State Automata and regular languages. Structure of MAL710 Database Management Systems
Recognizable sets. Sequential and linear sequential machines. 4 credits (3-0-2)
Infinite Digital Computation. Pushdown automata: Context free Pre-requisites: CSL201
languages. Linear bounded automata: Context sensitive Overlaps with: CSL332/CSL771
languages. Turing machines: Recursive languages. Introduction to database concepts: data independence,
consistency, security and integrity; Relational Algebra and
MAL390 Statistical Methods and Algorithms
Relational Calculus; Query languages; Database design:
4 credits (3-1-0)
Functional dependencies, Normal forms, Decomposition of
Pre-requisites: MAL250
Relations; Indexing, Physical design, Transactions and
Mathematical methods and algorithms predominantly
concurrency control: Schedules and serializability, concurrency
applied to statistical data drawn in social sciences with a desire
control techniques, locking mechanisms; Recovery and
to design of experiments.
security: Types of failures and recovery manager, Transaction
MAL465 Parallel Computing logging and checkpointing; Concepts of Object oriented data
4 credits (3-1-0) bases; Introduction to Distributed databases.
Pre-requisites: MAL342
MAL715 Digital Image Processing
Introduction to Parallel Computing: Need, Scope, issues
4 credits (3-0-2)
and motivation; Models of Parallel Computation: Taxonomy of
Pre-requisites: CSL201
Parallel Architectures- SIMD, MIMD; PRAM model of
Overlaps with: EEL715/CSL783/PHL756
computation; Interconnection Networks: Tree, Hypercube,
Digital image fundamentals - representation, monochrome,
Mesh, etc., dynamic Interconnection Network; Routing and
and colour models, image sampling and quantization, Image
communication mechanisms for static interconnection
transforms, Image representation by stochastic models, Image
networks; elementary Parallel algorithms: Parallel reduction,
enhancement techniques, Image restoration, Image Analysis
Parallel prefix sums, List ranking, preorder Tree traversal,
- edge detection, segmentation, Scene representation and
Merging. Basic Communication Operations: point to point
description, Object recognition and image interpretation.
message transfer, broadcasting, all to all broadcasting, one
Image compression.
to all and all to all personalized communication. Parallel
programming Paradigm: Explicit versus implicit, shared MAL717 Fuzzy Sets and Applications
address space versus Message Passing, data parallelism 4 credits (3-1-0)
versus Control Parallelism; Introduction to Message passing Pre-requisites: EC 90
Interface (MPI); Parallel Programming Using MPI; Fuzzy sets as model for non-deterministic reasoning, logic
Performance and Scalability of Parallel Systems, Basic design and mathematical formalisms, fuzzy theory and algebraic
techniques; Parallel Algorithms for matrix computation, sorting, theories, applications to: automata theory, decision theory,
graph algorithms, Mapping and scheduling. logic, dynamical systems, theory of computation, optimization.
MAL466 Multivariate Statistical Methods MAL720 Neurocomputing and Applications
4 credits (3-1-0) 3 credits (3-0-0)
Pre-requisites: MAL390 Pre-requisites: EC 90
Multivariate Normal Distribution and sampling from it, Overlaps with: EEL781
Hotelling’s T2 and Mahalanobis D2 statistics, Multivariate Biological and Artificial Neuron, Perceptron model, Adaline
analysis of variance, Multivariate regression model, model, Different types of Activation functions, Learning
Discriminant function and classification problems, Canonical Techniques: Supervised and Unsupervised, Multilayered
correlation, Analysis of covariance structures, Principal feedforward networks, Back-propagation algorithm and its
Component Analysis, Factor analysis, cluster analysis, pattern improvements, Applications of Back-propagation algorithm
recognition. to Statistical Pattern Recognition, classification and
regression problems, Advantages of Neural Networks over
MAL468 Graph Theory statistical classification techniques, Recurrent networks,
4 credits (3-1-0) Radial Basis Function Networks as an interpolation model,
Pre-requisites: EC 90 Time delay neural networks for forecasting problems,
Overlaps with: EEL311, MAL376, CSL851 Probabilistic Neural Networks, Kohonen’s self-organizing
Introduction to Graphs: Definition and basic concepts; maps with quadratic functions and its applications to medical
Trees: characterizations of trees, minimum spanning tree; imaging, Adaptive Resonance Theory model, Applications
112
Mathematics
of Art model for knowledge acquisition, Extensive sessions interval tree. Randomized algorithms: Search trees, sorting,
in MATLAB for solving problems. skip lists. Advanced graph algorithm: Graph matching
algorithms, Network flows, Random graphs. String/vector
MAL736 Information Integrity matching algorithm: Rabin Karp algorithm, string matching with
4 credits (3-1-0) FSA, KMP – algorithm, Boyce+Moore, Dynamic programming
Pre-requisites: EC 90 algorithms. NP completeness: Basic concepts, NP
Information Integrity, concepts and definitions; direct integrity completeness and reducibility, Cook’s theorem, Examples
and its mechanism; modelling information error; system’s of NP – complete problems. Approximation Algorithms: Vertex-
view of Information Integrity; open system view of business colour problems, set-covering problem, subset-sum problem.
enterprise system; business process IS view as integral to
close loop information and control system and as information MAL780 Special Topics in Computer
origination process; information envelope, uncertainties Applications
therein, error Implications and loss of Information Integrity; 4 credits (3-0-2)
inadequacy of existing integrity mechanisms; criticality of Pre-requisites: EC 90
Information Integrity for efficient and economic processing of Topic and course contents will be announced before
information in IS view; Usefulness- Usability - Integrity registration by the concerned faculty.
paradigm; cost benefit analysis of Information Integrity; MAL782 Data Mining and Knowledge
mathematical equations for information value and for Discovery
improvement of Information Integrity; design basis for 4 credits (3-0-2)
Information Integrity analyzer and controller. Pre-requisites: MAL342 & MAL372
MAL745 Software Engineering Introduction to Data Mining, Data Cleaning and
4 credits (3-0-2) transformation, Data Warehousing architecture, Front end data
Pre-requisites: CSL201 warehousing operations, data cubes and other visualizations,
data synchronization with operational databases, Classificatory
Overlaps with: CSL740
knowledge Extraction and prediction, Decision Trees,
An introduction to software life cycle models; analysis,
Association Rule Mining, Error analysis, LIFT charts and ROC
design, coding and testing methods, software size estimation;
curves, Bagging and Boosting, Clustering, Sequence analysis,
cost and schedule estimation; project management; risk
Design of parallel and distributed data mining systems, mining
management; formal technical reviews; configuration
complex data. Laboratory assignments: Implementation of the
management and change control; and software reliability
above concepts.
estimation. Emphasis on large development projects.
MAL785 Natural Language Processing
MAL754 Principles of Computer Graphics 4 credits (3-0-2)
4 credits (3-0-2) Pre-requisites: MAL342 & MAL375 & MAL390
Pre-requisites: CSL201 Lingustics Essentials: Parts of Speech and Morphology,
Overlaps with: EEL754/CSL781 Inflectional vs. Derivational Morphology, Phrase Structure
Overview of Graphics Systems, Output primitives and their Grammar (dependency, ambiguity), Syntax and Syntactic
attributes, Geometric primitives in 2D, 2D transformations, 2D Theory, Semantics, Language variations, Pragmatics -
viewing, Clipping, Geometric primitives in 3D, 3D Object language as a means of communication.
representations, 3D transformations, 3D viewing, GUI
primitives, Computational geometry topics – Binary space Study of Words: Frequency, Hypothesis testing, Collocation,
partitioning trees, Triangulation, Polygon partitioning, Visible n-gram models, Word-sense Disambiguation - supervised,
surface detection, Surface rendering, Illumination models, unsupervised, dictionary-based.
Basics of computer animation. Lexical Acquisition: Verb Categorization, Semantic
MAL755 Algebraic Geometry Similarity.
4 credits (3-1-0) Grammar: Markov Models, Parts-of-speech Tagging ,
Pre-requisites: MAL124 / MAL255 Transformation-based learning of taggers, Tagging accuracy,
Polynomials in one and several variables with coefficients Context free Grammars, Parsing and probabilistic parsing,
in an arbitrary field. Affine space and affine varities. study of divergence.
Parametrizations of affine varities. The Hilbert basis theorem Applications: Statistical Alignment techniques (length based,
and Groebner bases. The geometry of cubic curves. The theory word-based, cognate-based), Machine Translation and its
of plane curves. Sphere with handles. Functions and various approaches, Information retrieval (vector-based model,
differentials on a curve, surfaces and hyper surfaces. term distribution model), Text Categorization.
Resolution of singularities of algebraic surfaces. Hilbert’s
nullstallensatz. Radical ideals and the ideal varities MAL786 Cryptology
correspondence. Zariski topology. Irreducible varities and 4 credits (3-1-0)
prime ideals. Decomposition of a variety into irreducibles. Pre-requisites: EC 90
Symmetric polynomials and introduction to invariant theory. Private Key Cryptosystems: classical techniques, modern
Projective algebraic geometry. Projective spaces and techniques, algorithms like DES, IDEA, RC5, Blowfish, etc.,
projective varities. Homogeneous coordinates. Projective confidentiality using Conventional Encryption; Public Key
planes. Intersections of projective curves. Projective invariants. Encryption and Hash Functions: principles of public key
cryptosystems, Diffie-Hellman key exchange, RSA,
MAL760 Advanced Algorithms introduction to elliptic curve cryptography; Introduction to
4 credits (3-0-2) Number Theory: modular arithmetic, Fermat’s and Euler’s
Pre-requisites: MAL342 theorem, primality testing, Chinese remainder theorem,
Overlaps with: CSL758 discrete logarithms; Basics of Finite fields; Message
Algorithm with advanced data structures: R-B tree, B-tree, Authentication and Hash function: MD5, SHa-1, HMAC etc.;
Splay Tree, disjoint set forest, Binomial heap, Fibonacci heap, Digital Signature and authentication protocols: Digital
113
Mathematics
signature, DSS, Authentication protocols; Differential and mathematical software development; hands-on experience
Linear cryptanalysis; existing cryptosystems and their security. with various mathematical and statistical software;
Cryptanalysis of existing systems. Zero-knowledge interactive sessions with professionals from industry and
protocols, One-way functions. Advanced protocols for R&D institutions.
different applications, e.g. e-cheque, e-cash etc. Network
and System level security issues. MAP290 System Design Laboratory
MAL790 Special Topics in Computer Science 2 credits (0-0-4)
4 credits (3-0-2) Pre-requisites: CSL101/CSL102
Pre-requisites: EC 90 Laboratory assignments on various topics covered in
The course contents will be announced by concerned MA754 and MA715.
faculty member before registration.
MAT450 Practical Training (MT)
MAN150 Introduction to Mathematics and
Non credit
Computing
2 credits (0-0-4) Pre-requisites: EC 90 at the end of 5th sem.
Lecture-demonstrations to introduce the art of reasoning Students will work for fifty working days to complete training
in the discrete world and illustrate the complexities of in a research/industrial organization.
114
Department of Mechanical Engineering
MEC410 Colloquium (ME) MED412 Major Project Part 2 (ME)
3 credits (0-3-0) 7 credits (0-0-14)
Pre-requisites: Registered for MET410 Pre-requisites: MED411
Introduction to planning, preparing and making The same student team continues working as per work plan
presentations – preparation of slides, time management, of Part-1. MED411, and facilitators. Using engineering
communication aspects, etc. Making a presentation on drawings, the process sheets are developed based on
practical training with response sheet for testing audience. available materials, machine tools and other fabrication
Reading an assigned project report, making a presentation facilities. Materials and standard components are procured
with audience response sheet and a critique on writing style, and manufacturing is carried out. After inspection, parts are
completeness and editorial get-up. Performing patent searches accepted. Assembly procedure is finalized and the machine
on an allotted product and making a presentation using is assembled. Acceptance tests are carried out vis-à-vis
diagrams/figures only. Preparing posters on practical training specifications from Part-1. Functioning product is displayed
and presenting these at a poster session. at an Open House. Professional quality documentation of all
designs, data, drawings, and results, change history, overall
MEC420 Colloquium (PE) assessment, etc. is mandatory, along with a final presentation.
3 credits (0-3-0)
Pre-requisites: Registered for MET420 MED421 Major Project Part 1 (PE)
Introduction to planning, preparing and making 3 credits (0-0-6)
presentations – preparation of slides, time management, Pre-requisites: EC 120
communication aspects, etc. Making a presentation on Team formation and problem identification. Preparing work
practical training with response sheet for testing audience. plan for Parts 1 and 2, and project management procedure.
Reading an assigned project report, making a presentation Identification of milestones, deliverables and final outcome.
with audience response sheet and a critique on writing style, Literature review, revision of basic courses. Formulating a
detailed problem statement, knowledge base and completing
completeness and editorial get-up. Performing patent searches
about 30% of the total work.
on a production or industrial engineering process/ product and
making a presentation. Preparing posters on practical training MED422 Major Project Part 2 (PE)
and presenting these at a poster session. 7 credits (0-0-14)
Pre-requisites: MED421
MED310 Mini Project (ME)
The same student team continues working as per the work
4 credits (0-0-8)
plan developed in Part-1, MED421, with same guide. Work is
Pre-requisites: EC 80
continued until all stated objectives and deliverables are met.
Team formation. Formulating work plan, learning objectives
The project outcome is displayed at an Open House.
and deliverables. Need identification, assessment of alternative
Professional quality documentation of the entire project is
approaches, defining design and performance specifications. mandatory.
Defining testing and/or validation procedure(s). Detailed work
including preparation of engineering drawings, fabrication and MEL110 Graphic Science
procuring parts. Assembly and testing. Performing 4 credits (2-0-4)
experiments. Model development, writing code, its validation, Orthographic, Axonometric, Isometric, Oblique, Perspective
and user’s and programmers manuals. Display of outcome at projections. Lettering, instruments and line work, free hand
an Open House. Documentation and coding of entire work sketching, plane geometric constructions, auxiliary planes.
and knowledge gained. Intersection and development of surfaces, planes and solids
with their spatial relationships. Transition pieces, rules and
MED320 Mini Project (PE) conventions for sectioning and dimensioning. Introduction to
4 credits (0-0-8) computer aided drawing. Examples of graphic communication.
Pre-requisites: EC 80
Team formation. Formulating and executing the work plan MEL120 Manufacturing Practices
on a topic related to production engineering or industrial 4 credits (2-0-4)
engineering. Nature of work could be either hardware based , The objective of the course is to expose students to basics
theoretical or computer simulation type. Display of outcome of manufacturing as it plays a direct role in improvement of
at an Open House and making a presentation. Documentation quality of human life and creating wealth for the nation. The
second objective of the course is to expose students to hands-
and coding of entire work and knowledge gained.
on practice with common manufacturing processes. It will
MED411 Major Project Part 1 (ME) cover: (i) importance of manufacturing, (ii) relation between
3 credits (0-0-6) materials and manufacturing, (iii) an overview of manufacturing
Pre-requisites: EC 120 processes, (iv) product manufacturing, (v) importance of
Team formation for designing, manufacturing and operating product assembly and inspection, (vi) an overview of
a selected product, formulating project management manufacturing planning, and (vii) manufacturing automation
procedures. Need identification, assessment of alternative and computer aided manufacturing for industry.
designs, selection of design for development, defining design MEL140 Engineering Thermodynamics
and performance specifications, and testing procedure. 4 credits (3-1-0)
Detailed mechanical, thermal and manufacturing-related Introduction to applications. Basic concepts and definitions
design of systems, assemblies, sub-assemblies and – system, boundary, equilibrium, steady state and others.
components culminating in engineering drawings and material Thermodynamic properties of a pure substance – saturated
specifications; preparing bill of materials and identification of and other states. Work and heat – definition and applications.
standard components and bought-out parts. 1st Law – internal energy and enthalpy, applications to non-
115
Mechanical Engineering
flow/closed and flow/open systems (SSSF and USUF), transfer and its measurement, tool life and tool wear
reacting systems and gas-vapor mixtures. 2nd Law – aspects. Theoretical models of shear angle solution, Basic
corollaries, Clausius inequality, entropy. Introduction to concepts of cost and economics of metal cutting operations,
availability, irreversibility and exergy. Carnot cycle. Basics of Tool nomenclature, chip control and design for machining.
gas-vapor mixtures and reacting systems. Vapor power Electrical discharge Machining, Electrochemical Machining,
cycles – Rankine cycle and its modifications. Air standard Ultrasonic machining, Abrasive Jet Machining, Laser Beam
cycles – Otto, Diesel, Brayton cycles. Vapor compression Machining, Water Jet and Electron Beam machining.
and absorption refrigeration cycles. Material deformation, Construction of Machine tools, alignment, metrology and
electro-magnetics and other applications. inspection.
MEL211 Kinematics and Dynamics of Machines MEL234 Metal Forming and Machining
4 credits (3-0-2) 5 credits (3-1-2)
Pre-requisites: AML110 & MEL110 Pre-requisites: MEL120
Kinematic pairs, diagram and inversion. Mobility and range Overlaps with: MEL233
of movements. Displacement, velocity and acceleration Mechanical behaviour of metals in elastic and plastic
analysis of planar linkages. Dimensional synthesis for motion, deformation, stress-strain relationships, Yield criteria,
function and path generation. Cam profile synthesis. Gears Application to tensile testing, Concept of flow stress by true
dynamic force analysis, flywheel, inertia forces and their stress-strain curves, Fundamentals of metalworking, Strain
balancing for rotating and reciprocating machines. rate and temperature in metal working, Hot deformation, Cold
Hydrodynamic and boundary lubrication in journal and thrust working and annealing, Analysis of bulk forming processes
bearings. like forging, rolling, extrusion, wire drawing by slab method,
MEL221 Industrial Engineering and Technology and practice of these processes, Sheet metal
Operations Research forming processes, High Energy rate forming processes,
4 credits (3-0-2) Fundamentals of metal cutting and common machining
Pre-requisites: MAL120 operations, Mechanics of metal cutting, Heat generation in
Introduction to Industrial Engineering, Evolution of key metal cutting, Tool wear and tool life, Nomenclature of cutting
Concepts, Work study, Productivity, Partial and Total tools and cutting tool materials, Cutting fluids, Abrasive
Productivity, Strategies to improve productivity, Management, machining, Surface finish, Economics of machining, Non-
Functions of management, Management Information System, conventional machining processes.
Decision Making, Prescriptive and Descriptive models, Type Laboratory activities on study of bulk and sheet forming
of Production systems and Layouts, Allocation Problems, processes, dies and presses for forming, conventional and
Design of Assembly Line System, etc., Introduction to unconventional machining processes.
Operations Research, Role of modelling, Nature of
Problems, Graphical method, Simplex method, various MEL235 Metrology and Quality Assurance
cases of LP problems, Duality, Sensitivity, Special topics etc. 4 credits (3-0-2)
Pre-requisites: MEL120
MEL231 Casting and Welding Introduction to Metrology and its relevance, standardization,
4 credits (3-0-2) dimensional measurement, limits, fits and tolerances, limit
Pre-requisites: MEL120 gauging, linear and angular measurements and their
Overlaps with: MEL232 applications, surface roughness-quantification and
This course exposes the student to foundry and welding measurement, alignment testing of machine tools, feature
technologies. The course covers introduction, applications, inspection and online inspection. Introduction to quality
basic physics involved in various processes, latest trends, assurance and quality control,Various elements in Quality
basic extractive and engineering physical metallurgy etc. Assurance program, On-line and Off-line quality control,
Familiarization and identification of various raw material,
Statistical concepts in quality, Central limit theorem, Quality
equipment and power sources, melting of metals, properties
Characteristics, QC Tools, Chance and assignable causes of
of sand, castings based on various processes. Welding
quality variation, Process control charts for variables, Control
practice, behaviour of covered electrodes, welding in different
chart parameters, Target process setting/ Centering, Control
positions, Basic exercises in SAW, GMAW, GTAW and
limits and specification limits. Process capability studies,
underwater welding.
Remedial / Corrective actions, Special purpose control charts,
MEL232 Casting, Welding and Forming Reject limits, Variables inspection and attributes Inspection,
4 credits (3-0-2) Control charts for attributes, Defects classification, Sensitivity
Pre-requisites: MEL120 of control charts. Sampling inspection for product acceptance,
Overlaps with: MEL231 single, double, multiple and sequential sampling schemes; OC,
Study of metal casting processes; Study of welding and AOQ, ASN and ATI curves; Design of sampling plans, Standard
other joining processes; Study of metal forming processes; sampling systems; Economics of product inspection, quality
Processing of plastics; Process planning and process analysis costs, ISO 9000 quality system; Problems and illustrations in
casting, welding and forming processes; Economic and quality quality assurance.
issues in casting, welding and forming processes.
MEL241 Energy Conversion
MEL233 Machining, Machine Tools and 4 credits (3-0-2)
Metrology Pre-requisites: MEL140
4 credits (3-0-2) Overview of energy conversion technologies. Combustion
Pre-requisites: MEL120 and applications – IC engines, burners, furnaces and
Overlaps with: MEL234 components. Compressible flow fundamentals – Mach number,
Introduction to machine tools and machining operations. normal shock, adiabatic 1-D flow through variable area
Mechanics of metal machining. Cutting forces, friction, cutting passages. Turbo-machinery – flow through a stationary and
fluids and surface finish, lubrication, temperatures and heat moving passage, velocity triangles, impulse and reaction
116
Mechanical Engineering
principles, characteristics and components of axial and transfer and electrical, pneumatic and vibration systems.
centrifugal turbo-machines. Refrigeration and air- Block diagram and transfer function.Modelling of continuous
conditioning – system analysis, components design, systems. Extraction of reduced order models. Transient and
psychrometry, and air-conditioning calculations. Steam frequency response evaluation using Laplace transform.
generation and its use – power plants, co-generation, Characteristics of hydraulic controller, pneumatic, electronic
combined cycles. Steam and gas turbine construction and controller, electro-hydraulic and electro-pneumatic
performance. Equipment studies and performance controllers. PID control. Stability. Gain and phase
calculations in the laboratory will concurrently accompany margins.Control system design using root and
lectures. compensation. Application to Machine tool, Boiler, Engine
MEL242 Heat and Mass Transfer Governing, Aerospace, Active vibration control, etc. Auto-
4 credits (3-1-0) tuning. Sequence control, Logic diagram. Introduction to
Pre-requisites: AML160 digital control, Implementation using computer. Introduction
Modes of heat transfer in various applications. Conduction: to control of MIMO systems. State Space modelling.
Heat diffusion equation, 1-D steady state conduction in
Practicals include studies on hydraulic, pneumatics,
extended surfaces, infinite and semi-infinite walls, heat
electronic controller. Control of various parameters such as
generation, lumped capacitance and simple transient
models. Convection: Forced and free convection - mass, speed, temperature, level, pressure, etc. Tutorials for control
momentum and energy conservation equations, non- problems in these areas using MATLAB.
dimensional numbers, hydrodynamic and thermal boundary MEL314 Noise Engineering
layers, basics of heat transfer in external and internal laminar 4 credits (3-0-2)
and turbulent flows, and use of co-relations. Boiling and Pre-requisites: MAL110 / MAL120 and EC 60
condensation: physical phenomena and co-relations. Mass Overlaps with: ITL760
transfer – Fick’s law, similarity with convection and Fundamentals of vibrations, vibrations of strings and bars,
correlations. Radiation: properties, Laws, 3-surface network Vibrations of membranes and plates. Acoustic wave equation,
for diffuse-gray surfaces. Heat exchanger fundamentals and
Acoustic energy and sound intensity. Propagation of sound,
design.
Concept of Acoustic impedance.Sound power transmission,
MEL310 Concurrent Engineering Transmission Loss. Human Response and ratings, Various
4 credits (3-1-0) Measures of Sound. Weighting filters, Loudness, Indices of
Pre-requisites: EC 60 Loudness. Acoustic radiation from spherical source and piston
Concurrent Engineering- meaning and need. Review of source. Acoustic sensors. Measuring Techniques and
Engineering Problem Solving methods. Description of Instruments, Octave Filtering, Sound Intensity Measurement,
methods of Analysis, Decision Making, Creativity and Intensity Mapping. Different types of measurement
Information processing and their role in engineering. environment and uses. Response of beam subjected to an
Discussion of Emerging engineering strategies of Total accoustic plane wave. Transmission loss of panels. Sound
Design, Design for Manufacturing and Assembly, Quality absorption coefficient. Noise control measures in building.
Function Deployment, and Constraint networks. Reverberation time and auditorium design. Industrial Noise
Integrating concurrent approaches with those of control, Noise in Machinery, Traffic Noise, Vehicle Noise.
conventional. Implementation of concurrent engineering in Design of silencers and mufflers. Active noise control.Duct
industrial environment especially those of IT and high speed noise control and cabin noise control. Practicals on noise
computation. measurements in different situations.
117
Mechanical Engineering
Work-related Musculoskeletal Disorders; Workplace Design; mechanisms and their assembly, study of machine tool to
Environmental Factors at Work; visual environment; thermal identify the existing limitations and to suggest changes.
environment; auditory environment; Vibration; Ergonomic
Workplace Analysis: Introduction to workplace analysis; MEL332 Design and Manufacturing of
Ergonomics workplace analysis; Ergonomic awareness Composites
checklist; Legal and safety issues, Various case studies. 4 credits (3-0-2)
Pre-requisites: MEL120 & AML140 and EC 60
MEL322 Operations Planning and Control FRP Composites, fiber types, fiber forms and properties,
4 credits (3-0-2) matrices type and properties, lamina, laminate, orthotropy,
Pre-requisites: MEL221 anisotropy, composites – macro and micro-mechanical
Production systems and performance measures. Life Cycle analysis and properties, Failure theories - Tsai-Hill, Tsai-
of a production system. Major managerial decisions in the life Wu, Primary and Secondary Manufacturing - Lay-up,
of a production system, Product design and process selection.
Autoclave Molding Filament Winding, Pultrusion,
Location and Layout of production systems, Product,Process
Compression Molding, RTM, RIM, SRIM, Machining, drilling,
and Cellular layouts, Demand Forecasting, Aggregate
routing etc., design, structural and testing, applications. Metal
production planning, Inventory and MRP, Scheduling decisions
and emerging trends. Matrix Composites and Ceramic Matrix composites -
Manufacturing routes and applications.
MEL323 Investment Planning
4 credits (3-0-2) MEL333 Metrology
Pre-requisites: MEL221 4 credits (3-0-2)
Basic framework of a firm. Investment options. Various Pre-requisites: MEL233
instruments. Portfolio concept. The Basic Theory of Interest, Introduction to Metrology and its relevance, standardization,
Impact of Inflation. Opportunity Cost of Capital. Deterministic dimensional measurement, limits, fits and tolerances, limit
Cash Flows, Project Net present Value, Other Project gauging, linear and angular measurements and their
Evaluation Criteria. Single Period Random Cash Flows, Mean- applications, surface roughness-quantification and
Variance Portfolio Theory, Portfolio Analysis and Management, measurement, alignment testing of machine tools, feature
Mathematical Programming approach, Single Index Models, inspection and Computer Aided inspection.
Capital Asset Pricing Model. Options and Futures. Black
MEL334 Low Cost Automation
Scholes Equation. Risk evaluation. Case studies from various
4 credits (3-0-2)
sectors.
Pre-requisites: MEL233 / MEL234
MEL324 Value Engineering Overlaps with: MEL312/EEL301/CHL261
4 credits (3-0-2) Introduction, Types of systems - mechanical, electrical,
Pre-requisites: MEL221 electronics, fluidics; Hydraulics Systems and components;
Introduction to Value Engineering (V.E.) and Value Analysis, Pneumatic Systems Control; Sequence operation of more
Life Cycle of a Product, Methodology of V.E., Quantitative than two cylinders and motors; Applications of relays/
definition of Value, Use Value and Prestige Value, Estimation switches; Measuring systems, Transducers; Feed back
of product quality/performance, Types of Functions, control systems; Programmable controllers; Small
Relationship between Use Functions and Esteem Functions components feeders; Automatic orientation and assembly;
in product design, Functional Cost and Functional Worth, Effect Design of components for assembly. Cost considerations
of value improvement on profitability, Aims of VE systematic and case studies. Laboratory work will be hands-on design
Approach. and operation of automatic systems.
Introduction to V.E. Job plan / Functional Approach to Value MEL335 Advances in Metal Forming
Improvement, Various phases and techniques of the job plan, 4 credits (3-1-0)
Factors governing project selection, Life Cycle Costing for
Pre-requisites: MEL234
managing the Total Value, Concepts in LCC, Present Value
Elements of theory of plasticity, Formulation of plastic
concept, Annuity concept, Net Present Value, Pay Back period,
deformation problems and different methods of solution,
Internal rate of return on investment (IRR), Examples and
Application of theory of plasticity for solving metal forming
illustrations.
problems, Numerical methods in metal forming, Friction and
Creative thinking and creative judgement, False material, lubrication in cold and hot working, Technological advances
labor and overhead saving, System Reliability, Reliability in metal forming processes- forging, rolling, extrusion, wire
elements in series and parallel, Decision matrix, Estimation drawing and sheet metal forming. Computer aided die design
of weights and efficiencies, Sensitivity analysis, Utility for forging, extrusion and wire drawing, Automation in metal
functions, Fast diagramming, Critical path of functions, forming processes, Advances in sheet metal forming,
DARSIRI method of value analysis, Purchase price analysis. Concept of Formability and its evaluation, Hydro-forming of
MEL331 Machine Tools and CNC Manufacturing sheets and tubes.
4 credits (3-0-2) MEL336 Advances in Welding
Pre-requisites: MEL234 4 credits (3-0-2)
This course exposes the student to conventional machine Pre-requisites: MEL231
tools and classification, machining operations, work and tool This course introduces the concept of welding technology
holding devices, drive systems, structures and guideways, involving metallurgy, designing, automation, welding of high
mechanisms, NC systems, controls, programming, industrial speciality alloys and materials and inspection procedures.
robots and applications, measurement techniques on machine
Familiarization and identification of various processes,
tools.
equipment, power sources, consumables, correlations
Familiarization and identification of various machine tools, between various responses and welding parameters and
study of structural features of machine tools, study of various under water welding.
118
Mechanical Engineering
MEL341 Gas Dynamics and Propulsion operation, system design, components. Psychrometry:
4 credits (3-0-2) definitions, heating, cooling, humidification and
Pre-requisites: MEL241 dehumidification processes, evaporative cooling systems.
Revision of fundamentals. Thermodynamics of compressible Environmental comfort specifications and standards.
flow – wave motion in compressible medium, Mach number Cooling load estimation and use of standards.
and cone, properties. Steady one-dimensional compressible Airconditioning systems and apparatus, air flow ducts, air
flow through variable area ducts. Converging and converging- quality. Control and optimization of HVAC systems.
diverging nozzles and diffusers. Effects of heating and friction
in duct flow, Rayleigh and Fanno lines. Flows with normal
MEL345 Internal Combustion Engines
shocks. Oblique shocks and reflection. Expansion waves.
4 credits (3-0-2)
Prandtl-Meyer flow. Flow over bodies. Measurements and
Pre-requisites: MEL140 and EC 60
Thermodynamics of fuel-air cycles, real cycles; Unburned
applications. Jet propulsion – types of engines, propulsion
and burned gas mixture charts; Ignition, normal and abnormal
fundamentals. Compressor, combustor and turbines
combustion in SI and CI engines; Conventional and alternative
construction and performance. Rocket propulsion – basics,
fuels for engines; Conventional and electronic fuel
solid and liquid propelled engines, parametric studies,
management systems for SI and CI engines; Design of
construction features, single and multi-stage rockets. Thrust
combustion chamber for SI and CI engines; Engine emissions;
chamber and nozzle models. Studies of in-use engines.
Lubrication; Cooling; Supercharging and Turbocharging;
Environmental aspects.
Modern developments in IC engines.
MEL342 Power Plant Technologies
4 credits (3-0-2) MEL346 Turbo-machinery
Pre-requisites: MEL241 & AML160 4 credits (3-0-2)
Introduction to power systems and technologies. Demand
Pre-requisites: MEL140 & AML160 and EC 60
Revision of fundamentals. Types of turbomachines and
variation and forecasting. Grid features. Siting and costing.
their applications. Dimensional analysis and performance
Diesel generators: systems, equipment and layout. Fossil-
fuelled steam power plants: Boiler and accessories, turbine parameters. Cascade theory: types of cascades, flow and
and accessories, feed cycle equipment, generator. Combined geometric parameters, boundary layer development. Wind
cycle power plants: gas turbine, heat recovery boiler. Nuclear tunnels: types, designs, construction features and
power: nuclear reactions, fuel, moderator and coolant, Neutron instrumentation. Axial flow turbines, axial flow compressors,
life cycle. Light water, Heavy water, Gas-cooled and fast propellers, centrifugal fans, blowers and compressors – fluid
reactors. Hydroelectric plants: Features and siting, Pelton, flow, types of blading, velocity triangles, diffusers and nozzles,
Francis, Kaplan and propeller turbines construction, mini- and pressure change, multi-staging, stall, enthalpy-entropy
micro-turbines. Renewable energy: solar, geothermal, wind, diagram, efficiency, acoustics, applications. Wind turbines –
biomass, ocean, fuel cells, unique features of decentralized types, analysis, site, atmospheric aspects. Solar plant
systems. Co-generation systems. Environmental issues, turbines: principles, construction features and performance.
sustainability and future scenarios. Future trends.
119
Mechanical Engineering
MEL412 Advanced Mechanical Design decompositions and null spaces. Interpolation in 3-D
4 credits (3-0-2) spaces, dual numbers, quaternions and screws. Dynamics
Pre-requisites: MEL311 of manipulators, EL and NE formulations. Parallel
Concepts of fatigue and creep design. Production Manipulators. Basics of vision systems. Robotic AI
considerations in design. Advanced concepts for design of Paradigms and Navigation.
spur, bevel, worm and other types of gear drives, bearings,
rotating discs, pressure vessels, etc. Optimization in design
MEL417 Lubrication
4 credits (3-0-2)
and computer aided design methods.
Pre-requisites: MEL311
MEL413 Design of Mechanisms Importance of lubrication, mechanisms and regimes of
4 credits (3-1-0) lubrication. Viscosity and its measurement. Bearing varieties
Pre-requisites: MEL211 and EC 90 and selection. Hydrodynamic lubrication-Journal and Thrust
Study of existing mechanisms used in industry, machine Bearings. Lubricants. Bearing materials. Rolling Bearings.
tools, vehicles, high speed machinery. Classification of MEL420 Total Quality Management
mechanisms. Structural analysis and synthesis for conceptual 4 credits (3-0-2)
design. Theory of path curvature and finitely movements. Pre-requisites: Completion of Practical Training in
Kinematic and dynamic design. Spatial Mechanisms. Errors any program (xxT4y0)
in mechanisms and machines. Coding, evaluation and Evolution of quality paradigms, Customer-orientation,
dimensional synthesis of mechanisms. Quality philosophies, TQM in manufacturing and services.
MEL414 Computer Aided Mechanical Design Tools and improvement cycle (PDCA). Life cycle approach to
4 credits (3-0-2) quality costs-Prevention; Appraisal and Failure costs.
Pre-requisites: MEL311 Organizational, Communicational and Team
Overlaps with: AML710 requirements. Attitude, value system and behavioral
Introduction and overview. Need and scope of Computer patterns. Use of teams in process management. Group
Aided Machine Design. Role of Geometric Modelling and Finite dynamics, Quality circles, high performance and self-directed
Element Method (FEM). Introduction to computer graphics teams, Empowerment. Seven QC tools and their applications,
technology and overview of hardware available for use in CAD, Quality Function Deployment. Statistical process
Geometric transformations and Projections. Windowing and Control,Process capability, Total Productive Maintenance,
view-porting. Geometric modeling; Modelling of curves, cubics, Importance of Standardization (National and international)
splines, beziers and b-splines, Modelling of surfaces, Modeling Quality Systems, Quality Manuals, Quality Information
Systems and documentation. Auditing. Basics of ISO-9000
of solids – b-rep, CSG, octree, feature based modeling,
and ISO 14000:Relevance and misconceptions, Six-sigma
Introduction to the Finite Element Method, principle of potential
philosophy Quality strategy and policy. Motivation and
energy, 1D elements, Derivation of Stiffness and Mass matrices leadership theories. Continuous vs. breakthrough
for a bar, a beam and a shaft, Comparison with Analytical results, improvements. Management of change. Quality award
Solution of static problems and case studies in stress analysis models and role of self-assessment. Benchmarking. Impact
of mechanical components, FEA using 2D and 3D elements. on society-Environment implications. Implementation
Automatic meshing techniques, Interfacing with CAD software, barriers to TQM practices.
Case studies using FEM for Design of simple element
geometries. Introduction to Dynamic analysis, Non-linear MEL421 Production Management
problems and FEA for plastic materials.
4 credits (3-0-2)
Pre-requisites: MET410
MEL415 Vibrations Engineering Design The generalized model of a production system. Financial
4 credits (3-0-2) evaluation of new product polices. Profit Volume Charts, Risk
Pre-requisites: MEL312 analysis, Product mix decisions, Location and layout analysis,
Overview. Need of vibration engineering design for Product, process and cellular layouts, Demand forecasting,
mechanical equipment. Theoretical and Experimental routes Aggregate production planning, Materials planning, MRP and
to dynamic design., Modelling and simulation to predict inventory management, scheduling in job and flow shops.
vibration behavior of mechanical systems and products. MEL422 Project Management
Techniques for vibration control including designing for 4 credits (3-0-2)
reduced excitation, choice of materials and configurations, Pre-requisites: MET410 / MET420
isolation, passive and active techniques etc. Finite Element The nature of projects, the project as a non-repetitive unit
model updating. Vibration engineering design production system, the project as an agent of change. Project
Identification considering objectives and SWOT analysis,
Using techniques of modal testing, Finite element model
Screening of Project Ideas, Technical, Market, Financial, Socio-
updating, system identification and structural dynamic
economic and Ecological Appraisal of a project. Work break
modification. Integration of dynamic design in mechanical
down structure and network development. Basic Scheduling,
engineering design. Some case studies of actual systems like Critical Path and four kinds of floats. Scheduling under
machine tools, pumps, compressors, turbines, transportation probabilistic durations, Time Cost tradeoffs, Project Monitoring
systems. etc. with PERT/Cost, Organizational aspects, Computer packages
MEL416 Robotics Engineering and Project Completion.
4 credits (3-1-0) MEL423 Computers in Manufacturing
Pre-requisites: MEL311 & (EEL101 / EEL102) and Enterprises
EC 90 4 credits (3-0-2)
Evolution of automatons, manipulators and autonomous Pre-requisites: MET420
systems. Forward and Inverse Kinematics. Velocity control, Evolving Manufacturing Environment, Role of IT,
Jacobian control of abundant systems, singular value Manufacturing Enterprise System Concepts, Application of
120
Mechanical Engineering
Computers in Manufacturing Enterprise Systems, Automation MEL427 Manufacturing Economics and Analysis
Strategies, Hard Automation, Programmable Automation, 4 credits (3-0-2)
Flexible Automation, Flexible Manufacturing Systems, Pre-requisites: MET420 & MEL221
Computer Integrated Manufacturing Systems (CIMS), Basics of Engineering economic analysis, concepts of
Enterprise Resource Planning (ERP), Supply Chains, varous types of costs, Decision making: Investment in a new
Extended Enterprises, e-manufacturing, e-Business, machine, Replacement of the existing machine, Make-or-
Concurrent Engineering (CE), Group Technology, Artificial buy, break-even point, Decision about the product mix,
Intelligence in Manufacturing, Expert System Applications, Justifying the investment in advanced manufacturing
Computer Simulation, Modelling, Towards Agile technology, Various economic measure: NPW, IRR, Pay-back
Manufacturing Enterprises etc. period etc.
MEL424 Knowledge Management for Concept and various methods of depreciation, tax
Competitiveness considerations, Stochasticity analysis.
4 credits (3-0-2)
Pre-requisites: MET420 & MED421 Multi-attribute decision-making framework, concept of
Knowledge Management (KM) Introduction, Definitions, utility. The traditional accounting system (standard costing)
Industrial Relevance, Evolving Industrial Competition (Multi- and contemporary costing systems such as Activity Based
Attributed Competition), Complex and Dynamic Systems, Costing (ABC), Target Costing, and Information system
Growing Need for Knowledge and its Effective Management, required for analysis.
Role of IT, KM and CRM, KM Technical Concepts: (Data .vs. MEL431 CNC Machines and Programming
Information vs. Knowledge), The Knowledge Edge, Knowledge 4 credits (3-0-2)
Engineering, KM Framework (Process Steps), Aligning KM Pre-requisites: MEL331 / MEL233
with Manufacturing Strategy, Business Strategy etc.),Design An overview of CNC machines - need, benefits and
and Deployment of KM in Industrial Enterprises (KM Team,
limitations, classification of CNC machines, Constructional
KM System Analysis, Developing Effective Systems,
features of CNC machines, CNC part programming -
Knowledge Audit), IT based Tools (Role of Simulation,
Preparatory and Miscellaneous codes, transformations,
Intelligent Systems) KM Challenges and Opportunities,
subroutines, canned cycles for CNC lathe and milling, CNC
Managing Innovations, Performance Measurement, KM and
program verification tools, CNC program generation from
Competitiveness Link, Applications, Cases, Presentations.
CAD, CNC controller and motion control in CNC system,
Group Exercises.
Applications of CNC and recent advances in CNC machines.
MEL425 Flexible Manufacturing Systems
4 credits (3-0-2) MEL432 Microprocessor Applications in
Pre-requisites: MET410 / MET420 Manufacturing
Flexible Manufacturing Systems: Introduction, Definitions,
4 credits (3-0-2)
Industrial Relevance, Need for FMS, Problems of conventional
Pre-requisites: (MET410 / MET420) & (EEL101 /
batch manufacturing systems, Role of Information
EEL102)
Technology, Overview of Multi model and mixed model flexible
Overlaps with: MEL411/EEL375/CSP413
Review of manufacturing and need and integration of
lines, Understanding Flexibility, Types of Flexibility in FMS,
microprocessor applications. Digital electronics review:
Flexible and Dynamic Manufacturing Systems, IT facilitated
number system, gates, flip-flops, counters, registers, tri-state
flexibility, integration and automation, Role of Integrated and
concept, TTL and CMOS circuits, memories, op-amps,
automated material handling systems, Typical FMS
comparators, etc.
operation, IT based Tools: Computer simulation and AI for
FMS, Group technology, Decision Support Systems, Design, Microprocessors: Microprocessor architecture and
Planning, Scheduling and Control Issues in FMS, Real time computer systems, timing diagrams and machine cycles,
control strategies, Various FMS configurations, Computer interrupts, instruction set, memory and I/O interfacting,
configurations, FMS as mini-CIM, Benefits and Justification programming techniques, PPI, Timer/Counters, Serial
for FMS, Future challenges and research issues etc. Interfacing and communications, Interfacing to keyboards
and displays, Standard busses.Microcontrollers and their
MEL426 Materials Management
applications. 8051 architecture and instruction set.
4 credits (3-0-2)
Pre-requisites: MET420 & MEL221 Microprocessor based measurement and control: D/A and
Introduction, Relevance of Materials Management, Need A/D conversion, data acquisition systems, optical
for Integrated approach, Deterministic models: EOQ, EPQ, interrupters and couplers, incremental encoders, interfacing
Discount, backlogging, multi-item models etc., sensitivity of motors and transducers, open loop and closed loop
analysis, basic systems of inventory management , inventory systems, PID control, motion control and robotics.
costing. Aggregate inventory models, Stochastic inventory
models, service level, single period model, etc., Role of Case studies of applications in process and discrete
uncertainty, Selective Inventory control. Material planning, manufacturing.
forecasting, Warehousing, Storage etc., documentation for MEL433 Micro- and Nano-Manufacturing
purchasing etc. MRP- concepts, logic, computerized models, 4 credits (3-0-2)
implementation issues, case studies. JIT-Philosophy, logic, Pre-requisites: MEL120 and EC 90
applications, implementation. Vendor selection, and An overview of micro and nano mechanical systems and
evaluation, Vendor relations, consolidation of vendor base, their applications in Mechanical Engineering, MEMS
single sourcing. Information systems for Materials, Microfabrication methods, Silicon Micromachining methods,
Documentation , e-procurement and internet based Laser Micromachining methods, Mechanical Micromachining
purchasing, e-commerce and materials management. techniques, Nanomanufacturing methods, CAD/CAM Tools
Organizational issues, and evaluation of materials function. for Micro- and Nanomanufacturing processes.
121
Mechanical Engineering
MEL434 Design for Manufacturing and Assembly and physiology, blood rheology, Vessel structure and
4 credits (3-0-2) mechanical properties. Heart and pumping process. Blood
Pre-requisites: MEL331 / MEL233 and EC 90 flow in body tissues. Engineering applications – dialysis,
An overview of three stages of product design, generating heart-lung machines. Lung and airways system network and
and evaluating conceptual alternatives from manufacturability physiology. Air and particle flow in airway passages, Alveolar
point of view, selection of materials and processes, Evaluating dynamics. Eye, ear and nose system. Fluid mechanics of
part configurations for manufacturability, Evaluating parametric flight and swimming. Heat transfer: Body temperature and
designs for manufacturability, DFM analysis for various moisture regulation, heat balance and control system,
manufacturing processes, Product design for manual applications to abnormal conditions. Bioheat equation,
assembly, product design for high-speed automatic assembly temperature distribution in tissue, applications to abnormal
and product design for robot assembly. situations. Heat transfer in animals, fish, birds and insects.
Thermodynamics of muscle. Micro-scale heat transfer and
MEL435 Geometric Modelling for bio-systems. Properties of tissue. Laws, codes and
Manufacturing regulations. Applications, plants, food processing, eco-
4 credits (3-0-2) systems.
Pre-requisites: MEP201 and EC 90
Geometric representation of curves, surfaces and solids, MEN110 Introduction to Mechanical
Machining of free-form surfaces from geometric models, Engineering
geometric modelling for die/mold design, geometric model 2 credits (0-0-4)
driven process simulation and process planning, use of Exposure to a wide range of applications of mechanical
geometric models in inspection of curved geometries and engineering through a variety of activities, including hands-on
reverse engineering, realization of free-form solids by layered assembly and disassembly of machines, such as, bicycle,
manufacturing, computational geometry for manufacturing and sewing machine, pumps, engines, air-conditioners, machine-
inspection. tools, amongst others; observational study of complex systems
via cut sections, visits, videos and computer simulations;
MEL436 Injection Molding and Mould Design design of simple machines/systems including specifications
4 credits (2-0-4) formulation; visits to industries, and discussions with senior
Pre-requisites: MEL311 students and alumni.
Nature of engineering plastics, visco-elasticity, design
methods and grade selection MEN120 Introduction to Production and
Industrial Engineering
Principles of Injection Molding, Injection molding machine 2 credits (0-0-4)
and types, capacity and clamping tonnage, mold size, Exposure to a wide range of production engineering and
plasticating extruder concepts, molding properties and control industrial engineering applications through hands-on
parameters, molding cycle. experience in assembly-disassembly of machines and
Injection Molds for thermoplastics, cavity and core- integer machine-tools, use of machines to produce simple parts;
and insert type, product consideration, material consideration, simulation (physical and/or computer) of manufacturing and
shrinkage, flow length, mold temperature, molding stresses, assembly processes; applications of industrial engineering,
parting line, feeding system design - sprue, runner, gate, weld such as, quality control and production management, amongst
line strength, ejection system design, mold cooling systems, others. Several visits to factories will be included as also video
runnerless molding, gas assisted and thermosets molding. and computer simulations on manufacturing processes and
systems, and discussions with industry representatives.
Exercises on CAD/ CAM of molds, mold flow analysis,
molding of articles, process control and defect identification. MEP201 Mechanical Engineering Drawing
3 credits (1-0-4)
MEL441 Modelling and Experiments in Heat Pre-requisites: MEL110
Transfer Introduction to design process and drawings. Review of
4 credits (2-0-4) sectioning, drawing standards, dimensioning and notes.
Pre-requisites: MEP341 & MEL242 Fasteners – screws, bolts and nuts, riveted joints, pins,
Introduction Geometrical and physical models of heat locking devices, welded joints, pipe joints, unions and valves.
transfer applications, comparison with experimental data, Assembly drawings with sectioning and bill of materials.
assumptions and their implications. Property data and its Cotter and Knuckle Joints. Assemblies involving machine
modelling. Mathematical models: algebraic, ordinary and elements like shafts, couplings, bearing, pulleys, gears, belts,
partial differential equations, boundary and initial conditions, brackets. Tool drawings including jigs and fixtures. Engine
solution methodologies. Results: representation and mechanisms-assembly and disassembly. Detailed part
interpretation, uncertainty and error bands. Heat transfer drawings from assembly drawings. Production drawings -
experiments: design, uncertainty analysis, selection of limits, fits and tolerances, dimensional and geometric
tolerances, surface finish symbols. Layout drawings.
geometrical and physical parameters, engineering drawings,
Schematics, process and instrumentation diagrams, piping
fabrication and instrumentation, rig calibration. Temperature,
drawings. Structural drawings - examples for reading and
pressure and flow rate measurements. Systemic errors in interpretation. Computer aided design and use of software
temperature measurement: thermocouple and thermowell packages for engineering drawings.
conduction, radiation and other phenomena. Data acquisition
systems: basics and applications. Project-type work involving MEP202 Design Innovation and Manufacturing
modelling, and designing and performing experiments 2 credits (0-0-4)
related to heat transfer applications. Pre-requisites: MEL110 & MEL120
Practical exercises involving: (a) Identification of
MEL442 Thermal Analysis of Bio-systems engineering solution parameters like materials,
4 credits (3-0-2) manufacturing and configuration variables, (b) Study and
Pre-requisites: MEL242 and EC 90 improvement of existing designs, (c) Open ended design
Introduction. Bio-fluid dynamics: Blood system network problems for generating innovative designs/solutions and
122
Mechanical Engineering
engineering problem solving, and (d) Product design with MET410 Practical Training (ME)
other life-cycle considerations in mind such as Non credit
manufacturing, maintenance and environmental Pre-requisites: EC 90 at the end of 5th sem.
considerations. Prior to training, students and faculty identify industries
MEP311 Mechanisms Laboratory where training that will meet the course objectives, in
1 credit (0-0-2) particular, linkages to the core mechanical engineering
Pre-requisites: MEL211 curriculum. An evaluation and monitoring plan is drawn
A set of 10 experiments based on Reuleaux basic up. Students spend at least 50 working days in the industry
mechanical devices, Grashoff mechanisms, Linkages, gear and submit regular progress reports to training
and gear trains, gear tooth profile, cams, belts, brakes, coordinator. Training activities comprise study and
clutches, bearings and lubrication, friction, Coriolis participation in various aspects of a manufacturing
acceleration, gyroscopic couple, balancing of rotating and enterprise and impacts on humans/society and
reciprocating masses, free and forced vibrations, environment. Before returning, each student submits a
transmission system of automobile vehicles, etc. comprehensive training report, report(s) on projects,
posters, presentation, response sheet and self-
MEP331 Process Engineering and Tool Design assessment. Training in academic institutions, software
Project industry, laboratories, and organizations with narrow
3 credits (1-0-4)
specialization is not permitted.
Pre-requisites: MEL231 & MEL234 & MEL235
Introduction to process planning, part print analysis, make- MET420 Practical Training (PE)
or-buy decision, product drawing analysis, establishing the Non credit
sequence of processes, economic processing Pre-requisites: EC 90 at the end of 5th sem.
considerations, machine selection, payback comparison, In the year prior to training, students and faculty identify
tooling costs, process documentation, routing, operation industries where training will meet the course objectives,
sheets, tolerance charting, computing dimensions and in particular, linkages to the core production and industrial
tolerances and computer aided process planning. engineering curriculum. An evaluation and monitoring plan
MEP341 Thermal Engineering Laboratory is drawn up. Student spends at least 50 working days in
1.5 credits (0-0-3) the industry and submits regular progress reports to
Pre-requisites: MEL242 & MEL241 program’s training coordinator. Before returning, each
Experiments related to courses MEL242 Energy student submits a comprehensive training report, report(s)
Conversion and MEL243 Heat and Mass Transfer courses. on projects executed, posters, presentation, an audience
Application of uncertainty analyses. Experiments will be response sheet and self-assessment of training.
conducted in a group of two students. A professional report The work will focus on production and/or industrial
is to be prepared for each experiment. engineering.
123
Department of Physics
EPC410 Colloquium (PH) rings; Michelson interferometer. Multiple Beam
3 credits (0-3-0) interferometery: Fabry Perot interferometer, Resolution and
Pre-requisites: registered for EPT410 Free spectral range; Interference filters; Fraunhofer diffraction:
This course will cover the presentations of the work carried diffraction by a single slit, double slit, circular aperture;
out by students during the Practical Training and will be Resolving power of microscopes and telescopes; Diffraction
attended by all students. grating, Resolving power and Dispersive power; Fresnel
diffraction: diffraction of a Gaussian beam, Polarization:
EPD310 Mini Project (PH) Concept of linear, circular and elliptical polarizations;
3 credits (0-0-6) Brewster’s law and Malus’s law; Double refraction by crystals;
Pre-requisites: EC 80 Interference of polarized light, half wave and quarter wave
The project details to be worked out by the faculty giving plates; Analysis of polarized light; Fermat’s Principle, Ray
the project keeping in view the learning needs of the student. equation and its solutions. Ray paths in inhomogeneous
EPD411 Major Project Part 1 (PH) media. Applications in fiber optics, mirage formation;
3 credits (0-0-6) Introduction to lasers; interaction of radiation with matter,
Pre-requisites: EC 120 Einstein coefficients, line shape function, condition for
To set the objectives, deliverables, work plan, logistics amplification, optical resonators, threshold for laser
planning and milestones with discernible outputs and then to oscillation.
demonstrate the feasibility through some initial work. EPL107 Electromagnetics
EPD412 Major Project Part 2 (PH) 4 credits (3-1-0)
7 credits (0-0-14) Revision of vector algebra and coordinate systems.
Electrostatics; Electrostatic field in matter: Electric field and
Pre-requisites: EPD411
potential due to a dipole, Dielectrics; displacement;
Working out the detailed work plan and implementation of
electrostatic energy in dielectrics; Magnetostatics: Magnetic
the project.
field due to a moving charge, motion of charged particles in
EPL101 Classical Mechanics and Relativity electric and magnetic fields; divergence and curl of a magnetic
4 credits (3-1-0) field; Magnetic field in matter and magnetic circuits;
Degrees of freedom, Generalized co-ordinates; D’Alemberts Electromagnetic Induction: Faraday’s law, Lenz’s law, energy
Principle; Hamilton’s Principle, Lagrange equations, in magnetic field Maxwell’s equations and electromagnetic
generalized monenta, cyclic coordinates and conservation waves: Displacement currents, generalisation of Ampere’s law,
laws, Applications; Motion in a noninertial frame, Coriolis force; Maxwell’s equations, EM wave equation, plane waves; Energy
Motion in a central force field; Kepler’s problem and its flow in EM waves.
solutions; Scattering of particles and the Rutherford Law; Rigid EPL202 Quantum Mechanics and its
bodies, Independent coordinates and their orthogonal Applications
transformations, Cayley Kein parameters, Euler’s theorem, 4 credits (3-1-0)
Moment of inertia tensor. Principal axis transformation, Force Pre-requisites: PHL110 / PHL120 / EPL101
free motion of a rotating body and methods of solving the Euler Formalism of quantum mechanics, Operators, Schrodinger
equations; Motion of tops, precession and nutation; Hamilton’s and Heisenberg pictures; Stationary Schroedinger Equation,
equations, Legendre transformations, cyclic coordinates, Harmonic oscillator, H-atom, Bound states, scattering states;
Canonical transformations, Poisson brackets and Liouville’s Quantum Mechanical theory of Angular Momentum, Spin,
Theorem; Hamilton Jacobi Theory; Dynamical systems: Basic Addition of Angular Momenta and Clebsch-Gordon
theory, phase slow, eqilibrium and stability, fixed points, Coefficients; Time-independent Perturbation Theory and
nonlinearity and bifurcation, strange attractor and chaos; application to bound states, Perturbation of an oscillator,
Lorentz Transformations, Tensor analysis, Time dilation, Degenerate case, Zeeman effect without spin, First-order and
Length contraction and velocity addition, Invariants and second order Stark effect; Hartree-Fock, Variational and WKB
conserved quantities, Newton’s equations of motion in methods; Time-dependent Perturbation Theory, Interaction
relativistic form. Picture, First-order and Harmonic Perturbations, Transition
probability, Sudden and Adiabatic Perturbations. Semiclassical
EPL103 Mathematical Physics Theory of radiation, Einstein Coefficients, Principles of Laser
4 credits (3-1-0) radiation; Quantum Mechanical Scattering Theory, Scattering
Sturm-Liouville Equation, Hermite and Laguerre Amplitude, Differential and Total Cross-sections, Born
Polynomials, Laplace, Poisson, Heat diffusion and wave Approximation, Unitary and sum rules; Density matri and its
equations; Integral equations; Fredholm and Volterra properties, applications. Many particle wave functions. Identical
equations; Green’s functions, applications of Green’s function Particles, Symmetric and anti-symmetric wave functions, and
in Quantum Mechanics and Solid State Physics; WKB, the Pauli Principle.
Perturbation and Variational methods; Cartesian tensors with
applications in Physics; Matrices. EPL204 Thermal and Statistical Physics
4 credits (3-1-0)
EPL105 Optics Pre-requisites: PHL110 / PHL120 / EPL103
4 credits (3-1-0) First and second laws of thermodynamics, micro and macro-
Overlaps with: PHL795 states, entropy and disorder, the Carnot cycle; Some practical
Wave propagation, 1-D and 3D dimensional wave equations, cycles; Entropy in quantum theory: the density of states,
Sinusoidal waves, Phase and Group velocities; Superposition general definition of temperature; The canonical probability
of waves, Interference by division of wavefront, Concept of distribution, spin paramagnetism, the partition function
spatial and temporal coherence; Interference by division of technique, photons and phonons, computation of the density
amplitude: Anti-reflecting films; Colour of thin films; Newton’s of modes, radiation pressure, radiative flux, entropy and
124
Physics
evolution. Sound waves and phonons; The chemical migration, metal-semiconductor reactions, silicides,
potential; adsorption; the quantum ideal gas, occupation Diffusion barriers, Oxidation-basic models, impurity
numbers and their estimation; fermions and bosons at low redistribution during epitaxial growth and oxidation; Ion
temperatures, white dwarf stars, Bose-Einstein implantation: profiles of implanted ions, Annealing
condensation and liquid He; The free energies: Helmhotz, mechanisms and their role in epitaxy and ion-implantation,
Gibbs; chemical equilibrium, phase equilibrium, adiabatic Rapid thermal annealing; laser modification effects.
cooling; superfluidity, Gibbs’ phase rules, vander Waals EPL213 Fundamentals of Semiconductors
equation of state, The Maxwillian gas equipartition theorem; 4 credits (3-1-0)
Third law of thermodynamics, negative absolute temperature. Pre-requisites: PHL110 / PHL120
EPL206 Solid State Physics Overlaps with: EEL218
4 credits (3-1-0) Motion of electron in periodic potential: Effective mass and
Pre-requisites: PHL110 / PHL120 / EPL101 Brillouin zone, Kronig Penneg Model, Nearly free electron
Crystal structure, Quasi crystals, Diffraction by a discrete model, Energy band gap in semiconductors, Holes, Methods
lattice; X-ray, electron and neutron diffraction; Defects; Lattice of calculating band structure; Density of States in intrinsic
vibration: concept of Debye and Einstein temperatures; thermal carrier concentration, Donors and acceptors, carrier-drift
diffusion, band structure; Phonons and scattering
conductivity.
mechanisms: Electron-Phonon, electron-electron
Dielectric properties of insulators: Types of polarisations, interactions, Ionized Impurity scattering; Generation and
local field and Clausius-Mossotti equation, dielectric constants Recombination Processes: Basic mechanisms- Thermal
and dielectric loss, dielectric strength and insulation and Shockley-Read, Hall, Impact-ionization and its transition
breakdown, capacitor dielectric materials, piezo, ferro and pyro rate; Optical Absorption in Semiconductors: Optical
electricity. Quartz oscillators and filters, piezo-spark constants, Kramer-Kronig relations, free carrier absorption,
generators, uni- and multi-axial ferroelectrics, pyroelectric plasma and cyclotron resonance, fundamental absorption,
detectors and devices. direct and indirect transitions, exciton, impurity and lattice
absorption; Photo-conductivity: traps, photoconductive gain,
Magnetic properties: Unpaired d-electrons in solids, photovoltaic effect, photo magnetic effect, emission of
classification of magnetic materials: dia, para, ferro, radiation from semiconductors; Junctions: Homojunctions,
antiferromagnetism; magnetic domains, soft and hard heterojunctions, metal- semiconductor and MIS junctions in
magnetic materials; ferrites equilibrium; junctions under non-equilibrium, current flow.
Superconductors, Meissner effect, flux quantisation, field EPL331 Vacuum Technology and Surface
penetration and high frequency effects, coherence, energy Physics
gap, Josephson junctions, SQUID, soft and hard 3 credits (3-0-0)
superconductors, superconducting magnets, HTSC. Pre-requisites: EC 60
Vacuum: its need in research and industry. Principles of
EPL208 Principles of Electrodynamics and low, high and ultra-high vacuum: production and
Plasmas measurement. Design aspects of vacuum systems for
4 credits (3-1-0) different applications, materials for vacuum systems.
Pre-requisites: PHL110 / PHL120 / EPL107
Basic laws of electrodynamics; Wave propagation in Surface Properties: Structural-surface structure and
dielectrics, semiconductors and conductors: attenuation, reconstruction, Electronic-contact potential and work function,
dispersion, phase and group velocities; Wave propagation in surface states and band bending, plasmas and surface
plasma: Basics of plasma, methods of plasma production, optics; Atomic motion-surface diffusion, surface melting and
electron motion in E and B fields, plasma wave, ion acoustic chemisorption
wave, electromagnetic waves, ionospheric propagation; Surface Analytical Techniques: Electron spectroscopic
Surface wave propagation, medium frequency communication; techniques (AES, XPS): Principles and applications in
Waveguides: rectangular and cylindrical, Resonators; Antenna: materials/devices; Imaging of atoms and nano-clusters
dipole antenna, antenna pattern, antenna array, radar; using tunneling and ultra-low forces (STM and AFM); Surface
Instabilities: two stream instability Cerenkov free electron laser; structure by LEED.
Relativistic covariance of Maxwell’s equations, Lienhard-
Wichart Potentials, radiation from accelerated charges. EPL332 Nuclear Science and Engineering
3 credits (3-0-0)
EPL211 Principles of Material Synthesis Pre-requisites: EC 60
4 credits (3-1-0) Basics of Nuclear Physics, Nuclear particle detectors,
Pre-requisites: PHL110 / PHL120 activation analysis, Carbon dating, fission and fusion,
Overlaps with: PHL702 principle/design/types of nuclear reactors, effect of nuclear
Thin films in solid state devices; Vacuum evaporation-Hertz- radiation on materials, radiation protection and environment,
Knudsen equation, film thickness uniformity; Glow discharge nuclear tracer techniques in industry, nuclear radiography,
and plasmas, DC, RF and microwave excitation; Sputtering thickness, density and other gauges, applications of
processes- Sputtering of alloys; Reactive sputtering, Plasma radioisotopes in agriculture and medical areas
chemistry, plasma etching mechanisms; CVD Deposition- Fusion Energy: Nuclear kinetics; reaction analysis,
Thermodynamics of CVD, gas transport, growth kinetics; Coulomb scattering; field effect trajectories; magnetic field
Nucleation and Growth:models for 3D and 2D nucleation, grain configurations; particle transport; energy viability; burn cycles.
structure and microstructure and its dependence on deposition
parameters; Epitaxy: lattice misfit and imperfections; epitaxy EPL333 Computational Physics
of compound semiconductor, theories of epitaxy, Role of 4 credits (3-0-2)
interfacial layer, Artificial semiconductors, Band-gap Pre-requisites: EC 60
engineering; Stresses in thin films-internal stresses, Adhesion; Overlaps with: MAL235
Diffusion, Interdiffusion and Reactions in Thin Films: Electro- Introduction to Numerical Methods: Locating Roots of
125
Physics
Equations, Interpolation and Numerical Differentiation, phototransistors, solar cells and CCDs; Photovoltaic Cells:
Numerical Integration, Systems of Linear Equations, Ordinary Single junctions under illumination, photon and carrier loss
Differential Equations, Smoothing of data – Method of Least mechanism, graded and tandem junction devices;
Squares, Fourier Transform Techniques; Simulation Optoelectronic integrated circuits (OEICs) .
Techniques: Random Number Generation and Monte Carlo
EPL337 Materials Science and Engineering
Methods, The Metropolis algorithm, Variational Methods and
4 credits (3-1-0)
Optimization Techniques; Applications of Computer
Pre-requisites: EC 60
Simulations in Physics: Random Walk and its Applications to
Overlaps with: PHL703
Polymers, Percolation and Fractal Phenomena, Aggregation
Elementary materials science concepts; Diffusion processes
Diffusion Models for growth, Chaos and Non-Linear Systems,
and their industrial applications; Phase diagrams: Gibbs phase
Ising Model Simulations of Magnetic Solids and Phase
rule, zone refining and pure Si crystals, First and Second order
Transitions, Simulations of simple Neural Network Models, Ray
phase transitions; martensitic transformation and spinodal
tracing algorithms in graded refractive index media.
decomposition; Electrical and thermal behaviour; solid
EPL334 Lasers solutions and Nordheim’s rule,Skin effect, thin metal films and
3 credits (3-0-0) integrated circuit inter-connections; thermoelectricity, seebeck,
Pre-requisites: EC 60 Thomson and Peltier effects, thermoelectric heating and
Overlaps with: PHL795 refrigeration, thermoelectric generators, the figure of merit;
The Einstein coefficients, Spontaneous and stimulated Elastic behaviour of solids, Anelasticity, thermoelasticity,
emission, Optical amplification and population inversion; viscoelastic deformation, Corrosion and Degradation of
Lineshape functions: Homogeneous and inhomogeneous Materials: Electrochemical considerations, corrosion
broadening, Natural, Doppler and Collision broadening; Laser environments, corrosion prevention, Materials Selection and
Rate Equations: Two level, Three level and Four level laser Design Considerations; Economic, Environmental and Societal
systems, Gain saturation; Optical amplifiers: Rare earth doped issues in Materials Science and Engineering.
fiber amplifiers; Optical Resonators: Fabry Perot cavity,
EPL338 Non-linear Phenomena in Physics and
Spherical mirror resonators, Stable and unstable resonators,
Engineering
Longitudinal and Transverse modes of the cavity, Threshold
4 credits (3-1-0)
condition for laser oscillation, Optimum output coupling; Q-
Pre-requisites: EC 60
switching and mode locking in lasers, Single longitudinal and
The dynamical system and its mathematical model,
single transverse mode oscillation; Laser systems: Ruby,
classification of dynamical systems; Oscillatory system and
Nd:Yag, Nd: Glass lasers; Tunable lasers: Ti-Sapphire laser;
its properties, illustrative examples; Linear Oscillators, damped
He-Ne, Argon ion, Carbon dioxide and Excimer lasers; Fiber
and driven oscillators, phase portraits, examples of
lasers; Semiconductor lasers: Fundamentals, Operation
applications in physics and engineering; Nonlinear oscillators,
Characteristics, Quantum well lasers, Distributed Bragg
fixed points, stability Bifurcation theory, applications to
reflector (DBR) and Distributed feedback (DFB) lasers; Laser
electrical circuits, chemical reaction dynamics, duffing
safety.
oscillator, transmission lines; Period doubling bifurcations,
EPL335 Low Dimensional Physics strange attractor, chaos, applications to Lorentz model and
4 credits (3-1-0) Van der Pol oscillator; Linear waves, weakly nonlinear and
Pre-requisites: EC 60 dispersive waves, solitons, Kdv, NLS, Sine-Gordon systems,
Overlaps with: PHL726 examples of applications in physics and engineering; Nonlinear
Concept of dimensionality of solids, 3D to 0D; Energy band optical phenomena: second harmonic generation, parametric
structure in low dimensions, motion of electron in bands, processes, optical solitons, soliton-based all optical
Density of states, Quantum wells and low dimensional communication systems; Nonlinear phenomena in condensed
systems, Tunneling transport in low dimensional solids, matter physics: Phase transitions, quasi-crystals, symmetry-
Behaviour of low dimension solids under electric and magnetic breaking,.
fields, Quantum mechanical treatment of low dimensional EPL439 Microelectronic Devices
solids, Photon and phonon transport, optical absorption, 3 credits (3-0-0)
interband absorption, optical properties, inter sub-band Pre-requisites: EC 90
transitions, Two dimensional electron gas. Overlaps with: EEL218
EPL336 Semiconductor Optoelectronics Basic Semiconductor: energy bands, donors and
4 credits (3-1-0) acceptors, carrier concentration, carrier transport, generation-
Pre-requisites: EC 60 recombination, high field effects, basic equations for device
Overlaps with: PHL793 operation; p-n junctions: electrostatics, space charge, abrupt
Review of Semiconductor Device Physics: Fermi level and and linearly graded, current-voltage and capacitance-voltage
quasi Fermi levels. p-n junctions, Schottky junction and ohmic characteristics, junction breakdown, transient behaviour
contact. Semiconductor optoelectronic materials, band gap hetero-junctions; Bipolar Transistor: transistor action, current
modification, quantum well structures; Semiconductor Photon gain, static characteristics, frequency response, transient
Sources: Interaction of photons with electrons and holes in a behaviour, junction breakdown, modelling-Ebers-Moll/
semiconductor, Rates of emission and absorption. Gummel-Poon, thyristor; Metal-Semiconductor contact:
Electroluminescence; the LED-materials, structure and device Schottky effect, metal-semiconductor contacts, current-
characteristics; Semiconductor Laser: basic structure, theory voltage characteristics, ohmic contacts; Field Effect
and device characteristics, DFB, DBR, Quantum well and Transistor: Junction field effect, MESFET, metal-insulator-
VCSE Lasers, Laser diode arrays; Semiconductor semiconductor (MIS), MOS diode, MOSFET, characteristics,
Photodetectors: Types of photodetectors: photoconductors and threshold voltage, frequency response, device scaling,
modelling, charge couple devices (CCD).
photodiodes, PIN diodes and APDs. Noise in photodetection.
Detector characteristics and device performance, Integrated Circuits: standard-bipolar/MOS/CMOS
126
Physics
technology, circuit realization, semiconductor memories, efficiency; Recording medium for holograms; Applications
RAM, ROM and PROMs, static and dynamic memories, of holography: display, microscopy; memories, interferometry,
design aspects, VLSI and ULSI. NDT of engineering objects, etc.; Holo-optical elements.
Analog optical information processing: Abbe-Porter
EPL440 Quantum Electronics experiment, phase contrast microscopy and other simple
3 credits (3-0-0) applications; Coherent image processing: vanderLugt filter;
Pre-requisites: EC 90 joint-transform correlator; pattern recognition, image
Overlaps with: PHL792 restoration; Data processing from synthetic aperture radar
Propagation of light waves through bulk media, Review of
(SAR), acousto-optic signal processing, discrete analog
electromagnetic waves, plane waves, Poynting vector,
processors.
polarization, diffraction; propagation through anisotropic media,
Nonlinear optical effects, Nonlinear polarization; Second order EPL444 Functional Nanostructures
effects: Second harmonic generation, Sum and difference 3 credits (3-0-0)
frequency generation, Parametric amplification, parametric Pre-requisites: EC 90
fluorescence and oscillation, Periodically poled materials and Overlaps with: PHL726
their applications in nonlinear devices; Third order effects: Self Basics of low dimensional (0D, 1D, 2D) structures,
Phase modulation, Temporal and spatial solitons, Cross Phase Quantum dots wires and wells, Nanoparticles-free and
modulation, Four wave mixing, Phase conjugation; dispersed, Nanocrystalline and nanostructured films, Self
Quantization of the electromagnetic field; Coherent states and organized structures; Nanostructures for optical and
their properties; Squeezed states of light and their properties; electronic applications, Quantum dot diodes, lasers and
Application of optical parametric processes to generate detectors, Single electron devices and logic applications,
squeezed states of light; Optical resonance and two-level Optical computing and Information processing; Carbon
atoms, atom cooling and trapping; Ultra-intense laser matter based nanostructures, Electrical, mechanical and chemical
interactions. properties of carbon nanotubes, Sensors and drug delivery
EPL441 Applications of Lasers in Technology vehicles, Data processing; Bulk nanostructured material and
3 credits (3-0-0) Photonic crystals; Nanostructures for Magnetic applications,
Pre-requisites: EC 90 Giant and Colossal Magnetoresistance. Nanostructured
Overlaps with: PHL752 ferromagnetism, Random Accsses Memories;
Brief review of laser principles and operative mechanisms. Nanostructures for catalysis and hydrogen storage,
Laser systems in Industrial research and development. CO2, Nanoclays, colloids and hydrogen storage nano materials.
YAG, Excimer and Ruby lasers in material processing, Laser Organic and Biological nanostructures. Nanomachines and
beam hardening; Lasers in material processing, thermal and supra molecular devices.
non-thermal laser induced processes, laser applications in EPL445 Engineering Optics
metal welding, cutting, drilling and nano-particle generation; 3 credits (3-0-0)
Laser ablation and thin film deposition; Laser processing of Pre-requisites: EC 90
semiconductors; Rapid thermal annealing and alloying; Overlaps with: PHL751, IDL731
Production of nano-structured Si and compound Lens systems and basic concepts in their design; Optical
semiconductors and their characterisation by laser Raman and components: Mirrors, prisms, gratings and filters; Sources,
photoluminesence spectroscopy; recent development in laser detectors and their characteristics; Optical
source technology; use of lasers in data storage, systems:Telescopes, microscopes, projection systems,
communication, information technology and medical photographic systems, interferometers and spectrometers;
instrumentation. Concepts in design of optical systems; Applications in industry,
EPL442 Fiber and Integrated Optics defense, space and medicine; LCD, CCD, compact disc,
3 credits (3-0-0) scanner, laser printer, photocopy, laser shows, satellite
Pre-requisites: EC 90 cameras, IR imagers.
Overlaps with: PHL790, PHL791 EPL446 Spintronics and Data Storage
Propagation in planar optical waveguides-concepts of 3 credits (3-0-0)
modes, prism film coupling, Effective index theory for 2-D Pre-requisites: EC 90
waveguides, Coupled mode theory for directional couplers and Basic magnetism, Spin polarization, Magneto and
periodic waveguides, I.O. devices, propagation in step and magneto-optical transport, Magnetic storage devices and
graded index fibers-pulse dispersion, Single-mode fibers and
other means of data storage, Ferromagnetic semiconductors
characteristics, Fiber technology and fiber characterisation,
and their use in recording media, Basics of GMR in materials
Optical communication system designs and recent trends,
and its applications in read heads, Spin valve and spin-tunnel
Non-linear fiber optics, Solitons, optical fiber sensors.
devices in data storage, Magnetic RAMs, Superparamagnetic
EPL443 Holography and Optical Information limit, Magnetic nanostructures for very large density recording,
Processing Future directions in data storage.
3 credits (3-0-0)
Pre-requisites: EC 90 EPN110 Introduction to Engineering Physics
Overlaps with: PHL756,PHL758,IDL734 2 credits (0-0-4)
Signals and systems, Fourier transform (FT), sampling Demonstration and interactive sessions with faculty in the
theorem; Review of diffraction theory: Fresnel-Kirchhoff areas of optics, photonics and photonic information
formulation and angular spectrum method, FT properties of processing; materials design and nano-technology;
lenses and image formation by a lens; Frequency response computational physics and device simulation; lasers, fiber
of a diffraction-limited system under coherent and incoherent optics and communication technology; plasma processing
illumination. Basics of holography, in-line and off-axis and technology; microelectronics. Visit to major facilities like
holography, plane and volume holograms, diffraction TEM, SEM, XRD, AFM and R&D institutions and/or industry.
127
Physics
128
Physics
PHL110 Fields and Waves Harmonic oscillator and Hydrogen atom problems,
4 credits (3-1-0) Application to semiconductor doping, Non-periodic
Gauss law and its applications in electrostatics in vector materials; Tunneling of particles and examples, Tunneling
form, electric polarization, permittivity, energy density in an through multiple barriers and semiconductor junctions;
electric field, Ampere’s law, charged particle motion in E and Interaction among quantum wells: materials under electric
B fields, magnetization, Faraday’s law of electromagnetic and magnetic fields, magnetic resonance effects;
induction; Equation of continuity, generalized Ampere’s law, Nanostructures – Concepts of electrons in low dimensional
Maxwell’s equations, wave equation, plane wave solutions, confinement, Quantum wells and Super-lattices leading to
electromagnetic wave propagation in dielectrics and new device concepts; Lasers – Einstein coefficients,
conductors, reflection/refraction, polarization, interference, Population inversion, Light amplification, Optical resonators,
Fraunhoffer diffraction; Origin of quantum hypothesis, de Characteristics of lasers; Superconductors – Vortex, Flux
Broglie’s hypothesis of matter waves, Uncertainty principle, quantization, SQUID, Levitation and its applications.
Wave function and wave mechanics, Schroedinger equation, PHP100 Physics Laboratory
QM operators, Expectation value, one-dimensional solutions: 2 credits (0-0-4)
zero potential, step potential, potential barrier and potential well.
Typical experiments on elastic constants, mechanically
PHL120 Physics of Materials coupled oscillator systems, surface tension and viscosity of
4 credits (3-1-0) liquids, thermal conductivity of bad conductors, black body
Nature of waves and particles, Wave-packets and radiation, interference, diffraction and polarization of light,
uncertainty, Wave particle duality, Wave mechanics and its Planck’s constant determination, photoelectric effects,
mathematical tools, Classical and quantum statistics, studies of a power source characteristics, charging
Statistics of discrete energy levels, Black body spectral discharging of a capacitor, electromagnetic induction, Study
density, Bose condensation; Free electrons, density of states, of AC circuit elements of inductor and capacitor, and analysis
Kronig-Penny model, Effective mass, Band structure, of the behavior of RC, LR and LCR circuits, Measurement of
Electrons in various types of solids, Particle in quantum well, phase by superposition.
129
Department of Textile Technology
TTC410 Colloquium (TT) processes. Effect of parameters on fibre breakage and fibre
3 credits (0-3-0) structure. Importance of dry jet wet spinning of PAN.
Pre-requisites: Registered for TTT410
Introduction to drawing and heatsetting in thermoplastic
Evaluation will be based on practical training and
fibres.
presentation.
TTL221 Yarn Manufacture - I
TTD310 Mini Project (TT)
4 credits (3-1-0)
3 credits (0-0-6)
Pre-requisites: CYL120 / MAL110 / PHL110
Pre-requisites: EC 80
Impurities in natural fibres. Separation of trash and lint. Pre-
Project type design/fabrication work under the guidance of
baling operations for wool. Purpose of opening, cleaning,
a faculty member. Prior to registration, a detailed plan of work
mixing and blending of fibres. Opening elements. Principles
should be submitted by the student(s) to the head of the
of fibre opening in blow room and card. Sequence of opening
department.
machines. Principles of cleaning. Influence of process
TTD411 Major Project Part 1 (TT) parameters on opening and cleaning. Analysis of opening and
3 credits (0-0-6) cleaning processes. Principles and methods of fibre mixing
Pre-requisites: EC 120 and blending. Mass transportation. Collection of waste.
Formation of project team (up to two students and up to Objectives and principles of drafting. Purpose and principle of
two faculty guides); formulation of work plan; completing condensation of fibres. Causes of mass variation of fibrous
targetted work for the semester and presentation of complete assembly and control. Automation and recent developments.
work of progress for award of grade.
TTL222 Yarn Manufacture - II
TTD412 Major Project Part 2 (TT) 4 credits (3-1-0)
7 credits (0-0-14) Pre-requisites: TTN110
Pre-requisites: TTD411 Fibre fractionation and combing. Sequence of operations
Continuation of planned tasks started in Project Part 1, in a rectilinear comber. Comber machine elements. Preparation
TTD411, to completion, thesis writing and presentation of of fibre assembly for combing. Theory of fibre fractionation.
complete work for the award of grade. Twist and yarn strength. Flyer twisting; types and design
aspects of flyers. Principles of ring twisting; design aspects of
TTL211 Structure and Physical Properties of
spindles, rings and travellers. Doubling and twisting of yarns.
Fibres
Twist insertion using rotors. Yarn formation using air-jets.
3 credits (3-0-0)
Twisting by friction drums. TFO and three for one twisting.
Pre-requisites: PHL110 / MAL110 / CYL120
Formation of laps. Packing of slivers in cans. Winding of
Molecular architecture, configuration, conformation,
rovings; Principle and design aspects of builder motion in
amorphous and crystalline phases, glass transition,
roving frame. Formation of cop build packages in ring frame.
plasticization, crystallization, melting, factors affecting Tg and
Package formation in rotor, air-jet, friction spinning and TFO
Tm. Basic structure of a fibre-one dimensional oriented,
twisting machines. Automation and recent developments in
semicrystalline, structure of fibrils. Role of molecular
spinning machinery .
entanglement on fibre formation. Formation of structure in
viscose and thermoplastic fibres i.e. PET, nylon, PP, and TTL231 Fabric Manufacture - I
acrylic. Methods of investigating physical structure of fibres 4 credits (3-1-0)
such as WAXD, SAXD, DSC, DMA/TMA, FTIR, birefringence, Pre-requisites: CYL120 / MAL110 / PHL110
and sonic modulus. Introduction to various fabric manufacturing methods. Yarn
Moisture absorption properties. Rate of moisture preparation for fabric formation. Winding: objectives, types,
absorption, Heat of sorption, water retention and swelling. basic features, and automation. Different types of packages.
Theories of moisture absorption- general view, absorption Pirn winding: objectives, types, basic features and
in crystalline and amorphous regions, quantitative theories. automation. Warping: Objectives, comparison of various
Theories of mechanical properties of natural and man-made types of warping machine, basic features, creels and control
fibres, viscoelastic behaviour, comparison of properties of devices. Sizing: Objectives, features of sizing machine,
various fibres. Fibre friction. Optical properties, Introduction machine elements and process parameters, sizing
to electrical properties such as dielectric properties and static materials, size preparation and application, size fibre
charge generation. Thermal properties – heat-setting. interaction. Drawing-in and knotting.
TTL212 Manufactured Fibre Technology Weaving: Loom elements, classification of looms, primary,
4 credits (3-1-0) secondary and auxiliary motions of loom, multiple boxes,
Pre-requisites: CYL120 / MAL110 / PHL110 over and under picking, beat-up, take up, let-off, weft stop
Polymerization of nylon-6, nylon-66, poly(ethylene and warp stop motion, weft feeler, warp protecting device
terephthalate), and polyacrylonitrile. Important reactions and and box motion. Cam design for shedding and picking.
their kinetic rate equations. Batch versus continuous reactors. Dobbies and Jacquards: classification, mechanism and
Modification of PET and nylons. design developments. Automatic loom, basic features, pirn
changing and shuttle changing mechanism. Loom winder
Introduction to polymer transport phenomena, Polymer
and box loader.
rheology, Shear flow through a capillary, elongational flow in
a spinning line. Melt instabilities. Melt spinning lines, stress Fabric structure: classification, notation of weave, draft and
induced crystallization in high speed melt spinning. peg plan, plain weave with its derivatives and ornamentation,
Characteristic features of PET, polyamide and polypropylene basic twill and satin weaves. Analysis of simple fabrics and
spinning. Spin finish and its components. Wet and dry spinning calculations pertaining to yarn requirements.
130
Textile Technology
Calculation for production and efficiency related to winding, Pass/Fail criterion and shade sorting. Colour
warping, sizing and weaving. communication. Using computer colour matching software.
TTL232 Fabric Manufacture - II TTL310 High Performance Fibrous Structures
4 credits (3-1-0) and Composites
Pre-requisites: TTN110 3 credits (3-0-0)
Shuttleless Looms: Principles of weft insertion, power of Pre-requisites: EC 60
picking, velocity and acceleration and picking elements, Introduction to fibres for high performance composites.
energy consumed, timings, drive to sley and healds, fabrics Different fibre architectures used for composites and their
quality and productivity of projectile, rapier, air-jet and water- characteristics and properties. Influence of fibre architectures
jet looms. Comparison of various weft insertion systems. on the properties of composites. Unidirectional, planar, 3D and
Theoretical analysis of weft insertion in shuttle less looms. net-shaped performing. Introduction to matrix types and their
Principles of fabric formation on two phase, multiphase, properties. Polymeric matrices for rigid and flexible composites.
circular and narrow fabric weaving. Carpets: basic features Reinforcing materials and the effect of their geometry on the
and manufacturing process of hand/machine knotted, woven properties of composites. The fibre-matrix interface; role of
(Brussel, Wilton, Axminster) and Tufted carpet. Leno weaving, coupling agents. Mechanism of stress transfer. Toughness and
Triaxial weaving. Multiphase weaving. Denim manufacturing. thermal behaviour of composites. Various techniques of
composites design and fabrication. Composites for structural
Basic weft and warp knitted constructions; primary and engineering, electrical, civil, aerospace, defense, automobile,
secondary knitting elements; sequence of loop formation on sporting goods and other applications. Design and analysis of
warp and weft knitting machines; relation between machine textile structural composites.
gauge and yarn count; productivity of knitting machines;
geometry of a loop in plain knitted fabric; control of loop length, TTL311 High Performance and Specialty Fibres
fabric weight and dimensions. Properties of knitted fabric. 3 credits (3-0-0)
Nonwoven fabrics: Definitions and classifications; production Pre-requisites: TTL211 / TTL212 / TTP211
technology, selection criteria and important properties of Polymerization, spinning and properties of aromatic
fibres used. Different types of webs and bonding techniques. polyamides, high molecular weight polyester, rigid rod and
Production and properties of needle punched, stitch bonded, ladder polymers such as BBL, PBZT, PBO, PBI. Manufacturing
adhesive bonded, spunlaced, spun bonded and meltblown of carbon fibres from PAN precursors, viscose and pitch fibres.
fabrics. Glass fibres. Liquid crystal fibres. Gel spinning of polyethylene.
Hollow and profile fibres, design of spinnerette for such fibres.
TTL241 Technology of Textile Preparation and Membrane technology. Blended and bicomponent fibres.
Finishing Medical textiles. Superabsorbent fibres. Plasma modification.
3 credits (3-0-0) Radiation processing. Industrial tapes. Biaxially oriented films
Pre-requisites: CYL120 / MAL110 / PHL110 and film fibres. Barrier films and coatings.
Natural and added impurities in textiles. Singeing,
desizing, scouring, bleaching, mercerisation and optical TTL321 Mechanics of Spinning Machinery
whitening of cotton. Combined preparatory processes 3 credits (2-1-0)
Carbonisation, scouring and bleaching of wool, degumming Pre-requisites: TTL211 & TTL222
of silk. Preparation of synthetic fibres and blends, heat setting. Types of gears. Nomenclature of spur and helical gears.
Machinery for preparation of textiles. Surfactants and their Conjugate action and involute tooth profile. Interference.
application. Introduction to chemical and mechanical Force analysis in gear drives. Thrust loads. Bevel and worm
finishes. Chemical finishes for hand modification. gears. Velocity ratio of epicyclic gear trains. Differential
Biopolishing, easy care, oil, water and soil repellent finishes. gearing in roving frame and comber. Design of cone drums
Fire retardancy, antimicrobial finishes. Finishes for wool. for scutcher and roving frame. Flat, V, round and timing belts.
Mechanical finishes like shrinkproofing and calendering; Tape drives. Belt drives for special purposes. Adjustment of
Raising, sueding and emerising. Low liquor application belt tensions. Chain drives and polygonal effect. Analysis of
techniques and machinery; Stenters and dryers. tensions, torque, bending forces and power transmission in
drives. Jaw, friction, cone and centrifugal clutches. Block and
TTL242 Technology of Textile Colouration other brakes. Force analysis in clutches and brakes. Sliding
4 credits (3-1-0) contact bearings, friction in journal bearings. Classification
Pre-requisites: TTN110 and use of ball and roller bearings. Equivalent bearing load
The principles of dyeing and printing of textile materials. and load-life relationship. Design of transmission shaft and
Basic characteristics of dyes, chemical structure of dyes, and drafting rollers: Safety factor, tensile, compressive, shear,
classification of dyes. Dyeing equipment and the specific dyes bending and torsional stresses. Design for static load, lateral
and procedures used to dye textiles. Evaluation of Fastness. and torsional rigidities. Balancing of machines and
Methods of printing namely, roller, screen, transfer, ink jet and vibrations, flexible spindles.
the preparation of printing paste. Direct, discharge and resist
printing styles. Physical chemistry of fibre/fabric dyeing. TTL322 Mechanics of Spinning Processes
Physicochemical theories of the application of dyestuffs to 3 credits (3-0-0)
textile and related materials, including the thermodynamics Pre-requisites: TTL221 & TTL 222
Forces acting on fibre during opening and cleaning
and kinetic principles involved.
processes. Carding process. Analysis of cylinder load and
Discussion of colour science and computer match transfer efficiency. Fibre configuration in card and drawn sliver.
prediction in dyeing fibres, yarns, and fabrics. Objective Fibre straightening and hook removal. Sliver irregularity. Fibre
specification of colour, colour difference measurements, and movement in drafting field. Suppression of drafting wave.
various colour spaces. Based on colour theory and numerical Drafting force. Roller slip, roller eccentricity and vibration. Fibre
analysis, computer match prediction algorithms. Setting of fractionation in comber. Analysis of forces on yarn and traveller.
131
Textile Technology
Spinning tension in ring and rotor spinning. Twist flow in ring Jacquard, working on CAD, development of various designs
and rotor spinning. End breaks during spinning. False twisting for Jacquard, level and carpet. Development of design
principles. Blending of fibres. Evaluation of blending efficiency. samples.
TTL323 Process Control in Spinning TTL333 Process Control in Weaving
3 credits (3-0-0) 3 credits (3-0-0)
Pre-requisites: TTL221 & TTL222 Pre-requisites: TTL231 & TTL232
Importance of process control. Control of mixing quality and Importance and consideration for evolving a system for
cost using LP. Bale management. Control of cotton process control. Machine and energy audit. Housekeeping and
contamination. Control of cleaning efficiency and waste in material handling. Statistical interpretation of data on waste and
blow room and card. Control of waste in comber. Control of quality. Controls for quality, machine stoppage and productivity
neps in sliver. Control of imperfections and faults in yarns. in winding, warping, sizing, drawing, prin winding and weaving.
Control of yarn count and count CV%. Control of strength, Standard norms for settings speeds and production rates. Fabric
and strength CV%. Control of periodic mass variations. defects and their control. Control and norms of hard waste in
Machine and energy audit. Analysis and interpretation of various processes. Care, selection and consumption norms of
statistical data. Total quality control. accessories. Importance and types of maintenance,
maintenance schedule in winding, warping sizing and loom
TTL324 Spinning of Man-made Fibres and shed. Machine audit: Energy norms in winding, warping sizing
Blends and loom shed and scope of its control. Calculations pertaining
3 credits (3-0-0) to production, efficiency and machine allocation in winding,
Pre-requisites: TTL221 & TTL222 warping, pirn winding, sizing and loom shed.
Significance of manmade fibre sector. Fibre characteristics
and spinnability of manmade fibres. Fibre properties and end
TTL341 Polymers and Surfactants for Textiles
3 credits (3-0-0)
uses. Relationship between fibre properties and yarn quality
Pre-requisites: CYL230 / TTL241 / TTL242
and yarn characteristics. Role of spin finish and fibre crimp in
Surfactants, Classification and organic chemistry of
processing. Blending and its objectives. Estimation of blend
surfactants, micellization. Application of surfactants in textiles-
intimacy and blend irregularity and factors affecting them. emulsification, foams, wetting, solid dispersions in liquids,
Migration. Selection of blend constituents. Rotor, Friction and solubalization, detergency etc. Applications of polymers in
Air-jet spinning. Process changes for spinning of dope-dyed textiles. Properties and requirements for polymers for sizes,
and fibre-dyed fibres. Effect of blend composition on yarn thickeners, binders, adhesive, coating polymers and finishing
properties. Processing of man-made fibres and blends on agents. Chemistry of following polymer/copolymer systems –
cotton and worsted system of spinning. Production of bulk yarn. preferred polymerization technique, desirable comonomers).
TTL331 Fabric Structure and Analysis Commercial process, properties and specific applications:
3 credits (2-0-2) Modified natural polymers-starch/ cellulose/ Guar gum based
Pre-requisites: TTL231 / TTL232 / TTL221 / polymers, poly acrylic/ methacrylic acid, poly (vinyl acetate)
TTL222 and Poly (vinyl alcohol), polyurethanes, Poly (vinyl chloride)/
Introduction to various conventional fabrics like poplin, PVDC/ Fluoro polymers, rubbers/ styrene based polymers,poly
sheeting, cheese cloth, damask, denim, drill and jean, and (siloxanes) and other related polymers.
gabardine etc. Characteristics and building up of granite TTL351 Apparel Technology
weaves. Diamond and diaper weaves. Geometric patterns 3 credits (2-0-2)
in checker board weaves. Colour effects in woven fabrics. Pre-requisites: TTL231 / TTL232 / TTL241 /
Honeycomb and huckaback weaves. Leno and gauge TT242
structure. Study of whipcord and Bedford cord. Pique. Concept of clothing design and proportion. Fabric
Wadded structure. Extra warp and extra weft figuring. Detailed properties and their effect on garment properties, production
treatment of backed and double clothes. Interchanging warp and quality. Anthropometrics; Clothing sizes. Pattern making
and weft structure with figure effects. Center stitched double and grading. Principles of marker making; spreading and
fabrics. Warp and weft pile fabrics. Velvet and velveteen. cutting. Cutting methods. Quality control in the cutting room.
Analysis of fabrics referred to above for constructing weave Stitch classification, seam types and their applications.
(with draft and peg plan), constructional details and loom Sewing faults, their causes and remedies. Choice of sewing
particulars etc. Computerized designing. Overview of Indian needles and threads. Principles and comparison of
traditional woven textile designs. machines available for a variety of sewing operations. Work
aids-folders, special presser feet, feeding systems.
TTL332 Computer Aided Fabric Manufacturing Interlinings-classification and application. Fusing and
3 credits (2-0-2) pressing machines. Garment breakdown analysis. Clothing
Pre-requisites: TTL231 & TTL232 production systems and material handling. Garment dyeing
Electronic Dobby: Working principle, machine parameters, and finishing.
microelectronics electronics, design features, drive
arrangement, systems for pattern data transfer and design TTL352 Clothing Science
development. Electronic Jacquard: working principle, 3 credits (3-0-0)
constructional variants, various electronic jacquard systems, Pre-requisites: TTL211 / TTL232 / TTL231
selection system, pattern data, transfer and management. Factors involved in the study of clothing. General functional
CAD for dobby, jacquard, label and carpet: Design algorithm, description of clothing. Physiological and psychological
development of Jacquard designs, process of drafting and aspects of fabric comfort. Heat and moisture relations in
clothing. Physical properties of clothing and clothing
sketch design, development of figures, composition of
materials in relation to comfort; thermal resistance, water
design, geometric ornamentation, arrangement of figures,
vapor resistance, wicking and air-permeability. Influence of
weave simulation.
environmental conditions of the protective performance of
Practicals: Working on electronic dobby and electronic garments. Field studies on the thermal protection of clothing.
132
Textile Technology
Bending and shear proeprties, clothing fit and drape. Fabric production, properties and application of coated fabrics.
friction, static electricity and comfort. Aesthetic aspects of Flame retardant fibers and fabrics and their use in protective
clothing. Influence of fiber yarn characteristics and fabric clothings. Textiles in miscellaneous industrial applications.
construction parameters on clothing comfort. Current trends TTL364 Intelligent and Functional Textile
and new developments in the study of clothing. New 2 credits (2-0-0)
materials and finishes, new techniques, new concepts. Pre-requisites: TTL211 / TTP211 / TTL232 /
TTL361 Textile Testing TTL222
3 credits (3-0-0) Definition of smart and intelligent textiles. Passive and
Pre-requisites: TTL211 / TTL212 / TTL221 / active functionality. Textile with high protection and comfort
TTL232 properties. Extreme winter clothing with low heat
Introduction to textile testing. Selection of samples for transmission, heat absorbing, heat storing systems. Phase
change materials, incorporation of PCMs in fibres and
testing. Random and biased samples. The estimation of
fabrics. Breathable textile. Multifunctional textiles with
population characteristics from samples and the use of
incorporated electronics for integrated communication,
confidence intervals. Determination of number of tests to be
music, health monitoring, defence support functions,
carried out to give chosen degree of accuracy. Significant
wearable computers. Environmentally sensitive textiles-
testing of means and variance. Quality control charts and photochromic and thermochromic (chameleonic) fabrics,
their interpretation. Standard tests, analysis of data and test camouflage (radar shielding) fabrics, variable heat absorption
reports. surfaces, stimuli sensitive polymers such as temperature,
Measurement of length, fineness and crimp of fibres. pH, ionic, magnetic sensitive materials, design and their
Determination of maturity, foreign matter, and moisture applications to textile. Fibres as solar cells, Recent advances
content of cotton. Measurement of twist, linear density and in multifunctional textiles.
hairiness of yarn. Evenness testing of silvers, rovings and TTL365 Costing and its Application in Textiles
yarns. Analysis of periodic variations in mass per unit length. 4 credits (3-1-0)
Uster classimat. Spectrogram and V-L curve analysis. Pre-requisites: EC 60
Tensile testing of fibres, yarns and fabrics. Automation in Costing as an aid to management. Cost terms related to
tensile testers. Tearing, bursting and abrasion resistance income measurement, profit planning and cost control for
tests for fabrics. Pilling resistance of fabrics. Bending, shear textile industry. Costing of materials, labour and factory
and compressional properties of fabrics. Fabric drape and overheads and their control; methods of inventory costing
handle. Crease and wrinkle behaviour. Air, water and water- for textile industry, accounting of labour, factory over head
vapour transmission through fabrics. Thermal resistance of absorption rate, overhead cost allocation in a composite mill.
fabrics. Testing of interlaced and textured yarns. Special tests Job-order costing for a garment industry. Batch costing.
for carpets and nonwoven fabrics. Process costing; waste cost and its control in a textile mill.
Joint and by-product costing. Unit cost; costs of yarns and
TTL362 Theory of Textile Structures fabrics, fabric processing cost. Absorption and variable
5 credits (3-2-0) costing; short-term decision making. Profit planning; cost-
Pre-requisites: TTL211 / TTL221 / TTL222 / volume-profit-analysis, break-even point, contribution
TTL232 margin, margin of safety and capital budgeting. Cost control;
Types of yarn, Consolidation mechanism, Influence of standard costs, cost and revenue variances. Financial
fibre parameters on yarn structure, Coaxial helix model, information; balance sheet and profit and loss account.
Significance of twist, Yarn contraction, Influence of fibre Statement of changes in financial position. Ratio analysis.
properties and process parameters on yarn diameter and
TTL724 Textured Yarn Technology
density, Packing of fibres in yarn, spinning–in coefficient,
3 credits (3-0-0)
fibre migration, stress–strain behaviour of filament and
staple yarns, Failure mechanism of staple yarn, Geometry
Pre-requisites: EC 90
Principles of texturing and modern classification; False
folded yarn Elements of fabric geometry. Flexible and rigid
twist texturing process- mechanisms and machinery,
thread models. Crimp interchanges in woven fabrics and
optimization of texturing parameters, barre’, structure-property
crimp balance of elastic threads. Practical applications of
correlation of textured yarns; Draw-texturing- the need and
cloth geometry. Fabric sett, cover and areal density. Fabric fundamental approaches; Friction texturing- the need and
deformation in tension (uniaxial and biaxial). Bending development, mechanics of friction texturing, latest
behaviour of fabric: bending hysterisis, clustering ratio, development in twisting devices, optimization of quality
bending of set and unset fabric, bending in bias direction. parameters. Noise control in texturing.
Shear, drape, buckling and compressional behaviour,
mechanical properties of knitted fabric. Fabric mechanical Air jet texturing - Principle, mechanisms, development of
property in relation of making up. jets and machinery, process optimization and
characterization, air jet texturing of spun yarns.
TTL363 Technical Textiles
4 credits (3-1-0) Air interlacement - Principle and mechanism, jet
development and characterization.
Pre-requisites: TTL211 / TTP211 / TTL222 /
TTL232 Bulked continuous filament yarns - Need, principle,
Growth of industrial textiles. Engineering textile structures technology development.
for industrial purposes. Properties and use of textiles in the
Hi-bulk yarns - Acrylic Hi-bulk yarn production, mechanism
design of flexible composites like tyres, hoses and belts.
and machines involved, other such products.
Use of textiles in rigid composites, properties and
applications. Textiles in filtration. Agricultural application of Solvent and chemical texturing - Need, texturing of synthetic
textiles. Textiles in civil engineering applicaitions. Design, and natural fibres.
133
Textile Technology
TTL744 Environment Management in Textile to technically critical applications. A trip to a textile industry
and Allied Industries and short seminar series by students will make an integral
3 credits (3-0-0) part of this course.
Pre-requisites: EC 90
Importance of ecological balance and environmental TTP200 Design of Textile Products and
protection; Definition of waste and pollutant; Pollutant Processes
categories and types; International and Indian legislation 2 credits (0-0-4)
and enforcing agencies in pollution control; Waste Pre-requisites: TTN110 / MEL110 / MEL120
management approaches; Environmental Management Individual or group of students would be offered predefined
Systems – ISO 14000; Environmental impact along the textile product or process design project under the guidance of a
chain from fibre production to disposal: Toxicity of faculty members. Emphasis of the projects set should be on
intermediates, dyes and other auxiliaries etc.; Pollution load achieving set objectives using known technological
from different wet processing operations; Textile effluents components, rather than new or fundamental research.
and their characterisation; Technology and principles of
effluent treatment; Advanced colour removal technologies, TTP211 Introduction to Fibres
Recovery and reuse of water and chemicals; Air and noise 2 credits (1-0-2)
pollution and its control; Eco labelling schemes; Industrial Pre-requisites: PHL110 / MAL110 / CYL120
hygiene and safe working practices; Analytical testing of eco Classification of fibres-natural and manmade. Basic
and environmental parameters; Eco friendly textile structure of a fibre. General properties of a fibre such as
processing: waste minimisation, standardisation and moisture absorption, tenacity, elongation, initial modulus,
optimisation, process modification; safe and ecofriendly dyes yield point, toughness, elastic recovery.
and auxiliaries; Industrial hygiene and safe working
Detailed chemical and physical structure of natural fibres-
practices; Solid waste (fibre and polymer) recycling; Fibre
cotton, wool and silk, their basic properties. Introduction to
waste modification; Environmental management systems:
important bast fibres.
ISO 14000; Certification and criteria; case studies.
TTL762 Management of Textile Production Laboratory exercises would include experiments on fibre
3 credits (3-0-0) identification through physical appearance, microscopic-
Pre-requisites: EC 90 optical SEM, and burning behaviour. Chemical identification
Indian textile industry senario, production and exports, through solvent treatment and FTIR. Identification using DSC
handloom sector. Textile Policy. Sicknes in Textile industry, (melting point and glass transition temperature), density
analysis and options. Production planning and control; product measurement.
mix linear programming concepts. Inventory control models. TTP212 Manufactured Fibre Technology
Replacements and maintenance problems. Techniques of Laboratory
project evaluation. Mill planning. Forecasting, concept and time
1 credit (0-0-2)
series models. Management information systems. Sequencing.
Pre-requisites: CYL120 / MAL110 / PHL110
Assignment techniques. Method study. Marketing
Experiments related to fibres production processes. For
management research and planning. Zero defect concept.
example, determination of moisture in chips. Effect of
Modernization.
moisture and temperature on MFI of PET and PP. Melt
TTL773 Design of Experiments and Statistical spinning of PET, nylon-6 filament yarn on laboratory spinning
Techniques machines. Single and two stage drawing of the as spun
3 credits (3-0-0) yarns and POY. Demonstration of high speed spinning
Pre-requisites: EC 90 machine. Heat setting of PET and nylon drawn yarns on
Objectives and principles of experimental design. heaters, in oil bath and steam. Effect of temperature, slack/
Experimental design terminology. Increasing accuracy of taut condition on heatsetting. Determination of structure and
experiments. Completely randomized designs. Blocking mechanical properties of as spun, POY, drawn and heat set
designs Latin square designs. Analysis of variance (ANOVA). yarns using DSC, x-ray, FTIR, density, sonic modulus.
Two-level and three-level factorial designs. Complete 2n Determination of polymer solution rheology using Brookfield
factorial and fractional factorial designs. Response surface
rheometers and ball-fall method. Effect of shear rate,
designs. Central composite and Box-Behnken designs. Use
temperature on viscosity of solutions. Wet spinning or dry jet
of statistical packages. Fitting data. Linear regression with one
wet spinning of PAN copolymers. Demonstration of false
and more variables. Polynomial models. Correlation and
twist and air jet texturing processes. Determination of
coefficient of determination. Partial correlation. Rank
structure of textured yarn under microscope.
correlation Coefficient of concordance. Acceptance sampling
by attributes and variables. OC curves. Average run length. TTP221 Yarn Manufacture Laboratory - I
Control charts. Choice of sample size. 1 credit (0-0-2)
TTN110 Introduction to Textile Technology Pre-requisites: CYL120 / MAL110 / PHL110
2 credits (0-0-4) Practicals related to the theory course TTL211.
This course is an introduction to second year level courses TTP222 Yarn Manufacture Laboratory - II
in the department. The students are encouraged to self learn 1 credit (0-0-2)
basic principles of relevant technology and its technical jargon Pre-requisites: TTN110
by conducting simple experiments, making observations, and Practicals related to the theory course TTL222.
reading brief handouts. This includes learning the importance
of textile materials and structures in comparison to other known TTP231 Fabric Manufacture Laboratory - I
structural materials such as metals, ceramics, concrete, etc. 1 credit (0-0-2)
Introduction to development of various structures of textile, Pre-requisites: CYL120 / MAL110 / PHL110
such as fibres, yarn, fabric, and their conversion into everyday Experiments related to TTL231.
134
Textile Technology
135
Centre for Atmospheric Sciences
ASL410 Numerical Simulation of Atmospheric Numerical methods: (a) Finite difference methods -
and Oceanic Phenomena advection equation, stability analysis, oscillation equations,
4 credits (3-0-2) (b) Galerkin Methods - transform method, application of
Pre-requisites: EC 90 spectral and finite element methods to barotropic vorticity
Laws governing the motion of atmosphere and ocean, equation. Boundary layers: Prandtl layer, Ekman layer,
density stratification and static stability, equations of motion Monin-Obukhov similarity theory and surface layer, Closure
of a rotating fluid, scale analysis, hydrostatic approximation, assumption, eddy diffusion and K-theory, one-dimensional
vorticity and divergence, a coordinate system for planetary models of boundary layer. Objective analysis and
scale motion, Saint-venant (shallow-water) equations; initialization: data preparation, need for initialization of
Waves and instabilities; sound waves, surface gravity numerical models, dynamic and normal mode
waves, internal gravity waves, Rossby waves, vertically initialization, variational methods and four-dimensional data
propagating waves, barotropic and baroclinic instability; assimilation.
136