Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
This is a Quad Throttle Bodies (4 throttles) from Toyota Corolla Levin / Trueno AE101. It is also some times refer
to as ITB (Individual Throttle Bodies).
The brake vacuum is taken from throttle 1 & 4 via a side port. They are summed by a T-joint before connected to
the brake servo. Since throttle 4 is far from brake servo hence it is connected to another pipe then to the T-joint
(not shown).
1. Brake vacuum
2. Fuel input
3. ISCV input
5. Pressurized output for power steering idle up valve at steering rack & pinio
8. To Charcoal Filter
Idle Speed Control Valve - output then finally into intake via the red circle below.
Notice the old 4 throttles (shown below) does not have the opening (shown above) and that the injectors output
spray is significantly hindered when comparing 4 throttles from generation year 91 against year 93 June till
20vMAP edition. The year 93 unit is so much better.
But this does not mean the old 4 throttle does not have all 4 ISCV holes. They are hidden from current view, but
shown by the 4 purple arrows.
1. Brake vacuum from side of throttle 1 behind butterfly (big hole)
Red color
1. ISCV
2. ISCV
3. ISCV
4. ISCV
Pictures below courtesy Mr. Wong Yee Yong (forum member www.zerotohundred.com)
HOME - CHIN Fa Cheng's Technical Website for Acoustics, Audio and Car
Malaysia Boleh
Starting May 2007 I work in Hong Kong with frequent travel to Guang Dong Provinces. If you are near welcome to meet up, my email.