Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Parametric Exchange
for the Live Transfer of Surfaces to CAD Packages
Proprietary and Restricted Rights Notice
Information in this document is subject to change without notice. No part of this document
may be reproduced in any form or by any means including photocopying, recording, or
microfilming, or by any information storage and retrieval system including a web site, without
the written permission of Geomagic, Inc. No liability is assumed by Geomagic, Inc. with respect
to the use of the information contain herein. While every precaution has been taken in the
preparation of this document, Geomagic, Inc. assumes no responsibility for errors or omissions
that may appear. References in this document do not constitute an endorsement of any
products or services.
Geomagic, the Geomagic logo, Geomagic Studio, Geomagic Qualify, Geomagic Review,
Geomagic Blade, Geomagic Parametric Surfaces, Geomagic eShell and “the magic of making it
Simple” are either trademarks or registered trademarks of Geomagic, Inc.
Other company and product names referenced herein may be trademarks or registered
trademarks of their owners.
Guide History
Date Revision
Contact Information
Geomagic, Inc.
P.O. Box 12219
Research Triangle Park, NC 27709 USA
Phone: +1 (800) 251-551 or +1 (919) 474-0122
Fax: +1 (919) 474-0216
Web Sites
Geomagic, Inc. http://www.geomagic.com
Technical Support http://support.geomagic.com
Training http://training.geomagic.com
Email Addresses
Technical Support support@geomagic.com
Training training@geomagic.com
Services servicesinfo@geomagic.com
Sales salesinfo@geomagic.com
Table of Contents
1.4 Prerequisites 5
2 PARAMETRIC EXCHANGE 6
3 ADDITIONAL RESOURCES 11
This Guide encourages the user to integrate Geomagic Studio into routine engineering
processes by demonstrating the ease of sharing parametric elements between Geomagic
Studio 12 and a CAD package. The steps presented here are fully user-reproducible.
This Guide requires the reader to have working knowledge of Geomagic Studio and one of
the compatible CAD applications.
The Parametric Exchange command is a free add-on for Geomagic Studio 12. It requires a
package-specific plugin and runs in association with any of the following CAD packages:
CATIA, Inventor, Pro/E Wildfire, or SolidWorks.
For details on how to use the Parametric Exchange dialog, hover the mouse over the
Parametric Exchange icon under the Parametric Surfaces tab and press F1 to launch the help
file within the application.
The instructions in this document refer to data files that can be downloaded from the same
web page on which you found the Guide. Download the zip file to a directory of your choice,
double-click it to extract the file PX12-Guide-Fitting.wrp, and start Geomagic Studio 12.
1.4 Prerequisites
This Guide requires Geomagic Studio 12 with the Capture, Wrap, and Parametric Surfacing
module licenses, plus one of the compatible CAD systems.
2 REVERSE ENGINEERING BY PARAMETRIC EXCHANGE
Starting with an aircraft part that has already been scanned, its design intent detected and its
optimized surfaces generated (using the Parametric Surfaces Phase of Geomagic Studio), the
object of this game is:
1. to transfer the Parametric Surfaces to a CAD system (using the Parametric Exchange
command of Geomagic Studio),
2. to transfer the reverse-engineered CAD object back to Geomagic Studio for the purpose
of proving that the reverse-engineered part is true to the original polygon object (again
using the Parametric Exchange command of Geomagic Studio).
Step 1. Open PX12-Guide-Fitting.wrp in Geomagic Studio 12. This object, which represents
an aircraft fitting, is a cleaned-up Polygon object on which Parametric Surfaces have already
been fitted. Expand the model in the Model Manager by clicking the “+” sign. The surfaces
that are to be transferred via Parametric Exchange are listed. The Surfaces have been
renamed to reflect where they are on the model.
Step 1. While the Parametric Surfaces object is highlighted in the Model Manager, navigate
to the Parametric Surfaces tab and click on Parametric Exchange.
Under Exchange Options, select the name of the CAD Package (in this Guide, we are using
SolidWorks 2010).
Step 2. Parametric Exchange can use CAD-like actions when sending surfaces over to CAD
packages. Think of it as creating a solid model with one of the surfaces and then using the
other surfaces to cut into model to recreate your part in CAD.
Notice that Base Extrusion appears under Entity Table in the Parametric Exchange dialog.
Select to create the entity as a Solid and as the Create Operation.
Note: The Operation types will be different depending on what CAD package is being used for
Parametric Exchange to reflect the action names specific to that CAD package. For example,
Join for SolidWorks is Add for CATIA.
Step 3. Click Send. The block will appear in SolidWorks like in the picture below. The new
object appear in the CAD application’s Model Tree.
Extrude the base in the +Y direction to approximately 60”. This is so that we can use
Parametric Exchange to cut into the block with the other model entities. Beware of making
the block too large or the other model entities will not be large enough to cut through the
block completely.
Step 4. In Studio, press CTRL+C to clear the selection of the base. Then, highlight Base Plane,
Extrusion - Right Side, Mid Extrusion, and Extrusion - Left Side in the Graphics Area.
Select to send the Create as Surfaces and to Cut from the model.
Click Send. The four entities have cut away from the model.
Step 5. Repeat the Cut Operation in Step 4 for Arc Extrusion 1 and Arc Extrusion 2.
Step 6. Send the remaining four slot and 2 cylinder entitles to Solidworks. Create them as
Solids and choose to Subtract them from the existing model in CAD.
The completed parametric model now exists in SolidWorks.
Step 1. In the Parametric Exchange dialog of Geomagic Studio (Parametric Surfaces tab >
Parametric Exchange), click the Deviation Analysis button. Geomagic Studio immediately
transfers the engineered part back from the CAD system, compares the original Parametric
Surfaces to the newly engineered CAD object, and presents a colored-coded mapping of the
deviations between the CAD object and the original polygon data.
Step 2. The deviations in this example do not necessarily indicate a problem. In this case, the
reverse-engineered part is even better than the original because it was developed with the
precision of a parametric design process.
If the difference is unacceptable, perform additional work on the part in the CAD system and
press Deviation Analysis again. When the results are acceptable, click OK to exit the dialog.
3 ADDITIONAL RESOURCES
Other interactive user guides are available on the Geomagic Support Center website:
Four Basic Workflows for Geomagic Studio and Basic Workflow for Geomagic Qualify.
The guides provide step-by-step instructions and sample data files that can be loaded into the
software.
In addition to the user guides, self-paced training and product demos are also available.
3.2 Knowledgebase