Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
using Solaris Volume Manager and an Oracle database. It's easy to modify these steps
and add more file systems into the script.
Notes: In this example, I make only one instance or zone, called zone1. I used Solaris
Volume Manager in Steps 2 and 3, and I tested this on Oracle 10.1 and 10.2.
2. Make the meta devices. For example, I have three SAN disks, and I want to make a
meta device with the three disks concatenated. (Note: Please type the command all on
one line.)
# newfs /dev/md/rdsk/d61
newfs: construct a new file system /dev/md/rdsk/d61: (y/n)? y
# newfs /dev/md/rdsk/d62
newfs: construct a new file system /dev/md/rdsk/d62: (y/n)? y
# newfs /dev/md/rdsk/d63
newfs: construct a new file system /dev/md/rdsk/d63: (y/n)? y
#
5. Create the mount point for the root file system (/ fs) and /u00 and /u01 for the
Oracle database.
mkdir -p /export/zone1
mkdir /u00
mkdir /u01
mount /export/zone1
6. Execute the following script, which is shown in its entirety after Step 11.
7. Install zone1:
9. Transition the zone to the ready state by running the following command:
create -b
set zonepath=/export/zone1
set autoboot=true
add fs
set dir=/u00
set special=/dev/md/dsk/d62
set raw=/dev/md/rdsk/d62
set type=ufs
end
add fs
set dir=/u01
set special=/dev/md/dsk/d63
set raw=/dev/md/rdsk/d63
set type=ufs
end
add net
set address=10.11.33.144
set physical=ce2
end