Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Textiles (TT-03)
ABSTRACT
The benefits to science and society from Nanotechnology are substantial. If the criterion is
to produce very minute particle size fibers and materials the nano technology is the only way to
achieve the same. This article elucidates about the nano finishing in textile. Techno-science
recently introduced some nano finishes for textile substrateshas been reviewed here. The logic
of using low molecular weight fiber-reactive fluorocarbons that from the basics of Nano-Care
finish durable hydrophobic characteristic to fabrics. And mechanisms proposed to explain the
photo-catalytic self-cleaning effect of TiO2 have been described.
Developments in the production and evaluation of nano silver and wound care devices based on
anti microbial activity of silver have been covered in detail. Anti pollen finish by using the polymer
which have antistatic or electro conductive composition, flame retardant finish by using colloidal
antimony pentoxide, Odour fight finish by using tourmaline, UV protection finish by using nano
clay particles, Self cleaning suits by using film polymer mixed with silver nano particles and
characteristics of nano finishing in Garments have been described.
CONTENTS
INTRODUCTION
NANO TECHNOLOGY
INTRODUCTION OF NANO-FINISHES
FUNCTIONAL FINISHING
APPLICATION OF NANO-FINISHES
• ANTI-MICROBIAL FINISH
• PHOTO CATALYTIC SELF-CLEANING FINISH
• ANTI-POLLEN FINISH
• FLAME RETARDANT FINISH
• ODOUR FIGHTS FINISH
• UV PROTECTION FINISH
• SELF CLEANING SUITS
CONCLUSION
INTRODUCTION
The term Nano in Nano technology comes from a Greek word “Nanos” which means
‘dwarf’. The dictionary meaning of dwarf is abnormally small.
One nanometer is one billionth of a meter or 10-9 meters. One Nano meters is about
100000 times smaller than the diameter of the human hair.
Unique properties of Nano materials have attracted not only scientist and research
workers but also the businessmen, especially the textile, because of their high economical
potential.
NANO TECHNOLOGY
In 1974, Prof.Nario Taniguchi states that “Nano tech mainly consists of the processing
of Separation, consolidation and deformation of materials by one atom or one molecule.
Nano tech is the design characterization production and application structures, devices
and system by controlling shape & size at the nano scale.
This technology that can work at the Molecular level, atom by atom to create large
structures with improved molecular organization.
T
To
T op
opp down approach
Bottom up approach
Top down approach involving breaking down the bulk materials to nano sizes (Eg. Mechanical
alloying)
Bottom up approach the nano particles also made by building atom by atom
(Eg. Inert gas condensation)
One of the trends in synthesis process is to pursure nano scale emulsification through which
finishes can be applied to textile materials in more through, even and precise manner. Finishes
can be emulsified into nano-micielles made into nano sols (or) wrapped in nano capsules, that
can be adhere to textile substrates more evenly.
INTRODUCTION OF NANO-FINISHES
The first commercial application of Nano tech in textile and clothing industry is found in
the form of Nano particle (some times called nano bead) through a finishing process, which is
generally known as nano finishing.
The impact of nano technology in the textile finishing area has brought up innovative
finishing as well as new application technique. Particular attention has been paid in making
chemical finishing more controllable and more thorough, ideally discrete molecules or nano
particles of finishes can be brought individually to designated sites on textile materials in a
specific orientation and trajectory through thermodynamic, electrostatic or others technical
approaches.
It is known that atoms & molecules posses totally different behaviour than those of bulk
materials. While this properties are formerly described by quantum mechanics and latter
governed by classic mechanics.
FUNCTIONAL FINISHING
The application of ultra fine particles, produced using nano technology, in textile finishing
is fast growing. These application, are aimed at imparting multi functional properties such as ultra
violet resistant, anti bacterial, moisture control to apparel products, made from natural fibres
including, cotton, wool, silk and also synthetic fibres such as polyester and nylon. These
multifunctional properties are achieved through changing fabric at molecular level by nano
technology process.
Unstainable apparels based on nano technology are becoming widely popular. The nano
technology finish creates care free fabrics that minimize stains, superior liquid repellency and
provide wrinkle resistance. These enhanced fabric allow water and oil spills to easily bead and
roll of the fabric without penetrating the fibres and maintain in the fabric throughout the life of the
garment.
2. By modifying a rough surface using materials with low surface free energy.
Both these approaches have been used to give a hydrophobic finish to textile substrates.
Fluorocarbons are a class of organic chemicals that contain a perfluoroalkyl residue in which all
the hydrogen atoms have been replaced by Fluorine. These chemicals have very high thermal
stability and low reactivity. They considerably reduce the surface tension.
In the fluorocarbon finishes, the critical surface tension depends on the chain length of fluorinated
side chain and is minimum for chain length of n=9. The effect of the chain length on the oil and
water repellency is shown in table bellow.
• The attached multifunctional molecule can impart wrinkle resistance by Cross- linking
cellulose chains by maleic anhydride residues and also impartWater-repellency, crease-
repellency, soil resistance, detergent free washing,Increased speed of drying, improved
strength and abrasion resistance without affecting its air permeability or breathability
• The durability of the finish is much better than the conventional fluorocarbon acrylate
polymers based finish.
• The nano finish originally named as Nano Care ™, and marketed by Nano-Tex
ANTI MICROBIAL FINISH
“Silver” has been used in jewellery and for food utensils. It is a well known fact that the growth of
bacteria and microorganisms in food or water is prevented when stored in silver vessels due to its
antibacterial properties. The anti-bacterial properties of silver are now scientifically recognised.
Silver ions have broad spectrum of anti microbial activities.
The method of producing durable silver containing antimicrobial finish is to encapsulate a silver
compound or nano particle with a fibre reactive polymer like poly (styrene co-maleic anhydride)
• Prof.Yang has patented a process for preparing a silver nano particle containing
functional microcapsule having the intrinsic anti-microbial and therapeutic functions of
silver as well as additional functions of the products contained in the inner core of the
capsule.
• In these microcapsules, the silver nanoparticles are on the surface of the capsule.
• Instead of perfume, we may use thermo sensitive pigment, thermal storage materials or
pharmaceutical preparation in the inner core.
• The treated yarns showed effective anti-microbial activity against various bacteria, fungi
and chlamydia that included escherichia coli, citrobacter, bacillus subtilis etc.,
• This finished goods is used in medical industry as a safe & effective means of controlling
medical growth in the wound bed.
During the last two decades, advanced orientation processes that are combination of
powerful oxidizing agents (catalytic initiators) with UV or near – UV light have been applied for the
removal of organic pollutants and xenobiotics from textile effluents among them, TiO2 has been
proved to be an excellent catalyst in the photo degradation of colorants and other organic
pollutants.
Photo catalytic propensity of semi conductors such as TiO2 has been attributed the
valence band to the conduction band brought above by the absorption of a photon of ultra-band
gap light.
In the coating composition developed by XIN and Daoud, a sol mixture may be prepared
at Room temp by mixing titanium tetraisopropoxide, ethanol and acetic acid in a molar ratio of
1:100:0.05 respectively.
The fabric to be coated was dried at 1000C for 30 min, dipped in the above mentioned
nanosol for 30sec and then pressed at a nip pressure of 2.75 kg/cm2 .The pressed substrates
were then dried then at 800C for 10 min in a pre-heated oven to drive off ethanol and finally cured
at 1000C for 5 min in a pre-heated curing oven.
Nano sized TiO2 particles show high photo catalytic activities because they have a large
surface area per unit mass and volume as well as diffusion of the electron/ holes before
recombination.
This finish also have anti bacterial properties after having been subject to 55 washes
through home laundry machine & UV protection characteristics for 20 washes.
ANTI-POLLEN FINISH
• The smoothness of the finish on the surface and the anti-static effect does not let pollen
or dust come close.
• This is achieved by using the polymer which have antistatic or electro conductive
composition. (Eg. Fluoroalkyl – (meth) acrylate polymers)
• It is used in coats, blousons, hats, gloves, arm covers, bedding covers, etc.,
• Nyacol nano technologies, Inc has been the world’s leading supplier of colloidal
antimony pentoxide which is used for flame retardant finish in textile.
• It offers colloidal antimony pentoxide us fine particle dispension for use as a flame
retardant synergist with halogenated flame-retardants. (The ratio of halogen to antimony
are 5:1 to 2:1)
• Nano antimony pentoxide used with Halogenated flame-retardants for a flame retardant
finishes.
• 10 parts of nycal in 1550 parts of aqueous dispersion, with pH 7 and add 40 parts of H2O
and sufficient ammonia add for bring out pH 9, mix this with 50 parts of rubber latex and
spray to the Non-woven material.
• A Taiwanesse nanotech firm Greensheild has created underwear that fights odour.
This is achieved through nanotechnolgy.
• The underwear fibers release undetectable negative ions and infrared rays that destroy
odour-causing bacteria.
• The negative ions create a magnetic field that inhibits the reproduction of bacteria, thus
eliminating odour and lowering the risk of skin infection or irritation.
• Far infrared rays are absorbed by cells not just in the skin but throughout the body –
causing all the individual atoms being vibrated at a higher frequency, which speeds up
the metabolism and the elimination of wastes.
• Tourmaline a natural mineral limits a low-level radiation which in contact with oxygen,
carbon di oxide and water molecules in the air promotes electrolytic dissociation and
emits negative ions.
• This Nano finish can eliminate upto 99.99% of bacteria, 90% of odour and 75% sticky
moisture within the cloth as well as contributing to the overall health of wearer.
UV PROTECTION
Nano clay particles of montmoriblonite being one of most commonly used UV blocker.
It also increases 40% tensile strength, 60% flexural strength.
Sending your favorite suit to dry cleaning for one day become very infrequent practice.
Silver nano particles are used in a patented coating. A film polymer (poly glycidyl acrylate) mixed
with silver nano particles can be permanently integrated into any common fabric including cotton,
silk, polyester or blends; in the long run it can save time and money by reducing dry-cleaning
expenses. It is also eco-friendly and contains no fluorine compounds.
The research team is also trying to engineer anti-microbial particles / odour free agents in
to the coating, which could help to repel strong odours such as body odours & cigarette odours.
The coating would be flow essential also permanent for wear, without by dry cleaning
1. Nano – processed garments have protective coating, which is water and beverage
repellent.
3. When a substance is manipulated at sizes of approximately 100 nm, the structure of the
processed clothing becoming more compressed. This makes clothing stain and dirt
resistant.
9. Garments stay bright, fresh looking and are more durable than ordinary materials.
CONCLUSION
Nano finishes being developed for textile substrates are at their infantile stage .The basic
mechanisms and the logic of some of this finishes has been explained by the inventors. The
probability of the type of commercial finishing applications covered in this article occurring within
the next few years is quite high. Nano finishing can replaced traditional finishing technique of
textile products and readymade clothing with products of superior quality and lower production
costs. In feature, one can expect to see many more developments in textiles based on Nano
Technology.
REFERENCES
1. M. J Wadia & U.M Mimkas, nano technology: A boon to textile Auxillary industries.
Colorage Jan 2006 pp-51-56
3. M. Subramanian & Senthilkannan , Nano technology part2 ATJ- 2004 nov pp 117-121
5. K. A Aravindan & D. Gopalakrishan- A big future for small science : Nano technology in
textiles MMTI Apr 2006 pp- 128-130
6. http:/www.ntcresearch.org
7. http:/www.nanostatics.com
9. www.nanovip.com
10. www.nanocor.com
11. Prof. M.L Gulrajani – Nano finishes- Indian journal of fibers & textile research Vol 31,
March 2006 pp 187-201
12. Ritu Jain & Saurabh Agarwal – Recent innovation in textiles part1 Nano technology ATJ
Sep 2005 pp 55-59
13. Edward Menezes, Will Nano technology be commercially viable- Clothesline Aug 2004 pp
79-84
Aravin Prince .P & Raja .P are Final Year students in Department Of Textile Technology, RVS
College Of ENGG. & TECH. DINDIGUL-624005
E-mail : aravinprince@gmail.com & rajastex@gmail.com
To read more articles on Textile, Fashion, Apparel, Technology, Retail and General please
visit www.fibre2fashion.com/industry-article/
To promote your company, product and services via promotional article, follow this link:
http://www.fibre2fashion.com/services/featrued-article/featured_article.asp