Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Clipper Energy Supply Co. es una Empresa fundada en 1985 con el objetivo de
proveer equipos y partes para la Industria en general. Está conformada por la Casa
Matriz, localizada en Houston – USA y una Sucursal domiciliada en Quito, la misma
que fue creada en Febrero del 2000 con el fin de atender de una manera
personalizada a nuestros Clientes en Ecuador.
Clipper Energy Supply Co. cuenta con Profesionales altamente calificados y de gran
experiencia totalmente bilingües, una Base de Datos de los más importantes
fabricantes y distribuidores de Estados Unidos, Canadá y Europa, amplias oficinas
equipadas con todos los sistemas de comunicación actuales, todo lo cual nos permite
brindar a nuestros Clientes una eficiente provisión de equipos, materiales, partes y
piezas originales y el servicio de ingeniería de diseño de equipos de producción y de
instrumentación y control, entre otros.
Clipper Energy Supply Co. cuenta con varias representaciones que se detallan más
adelante para su referencia, lo que nos ha permitido ser uno de los más importantes
proveedores en Latinoamérica, con ventas en Costa Rica, Honduras, Guatemala,
Panamá, Venezuela, Colombia, Ecuador, Perú, Bolivia, Brasil, Argentina y Chile.
Entre los últimos proyectos que hemos realizado, podemos mencionar los siguientes:
3
www.clipperenergy.com
Juan León Mera 1741 y Orellana, 4to Piso 3355 West Alabama, Suite 1100
Quito – Ecuador Houston – Texas 77098 -USA
593-2-2543000 – Fax: 593-2-2523400 713-965-0006 – Fax: 713-965-0209
ventas@clipperenergy.com sales@clipperenergy.com
REPRESENTANTE / DISTRIBUIDOR
DE LO SIGUIENTE:
BTC
Bombas de lodos
FERGUSSON BEAUREGARD
4
www.clipperenergy.com
Juan León Mera 1741 y Orellana, 4to Piso 3355 West Alabama, Suite 1100
Quito – Ecuador Houston – Texas 77098 -USA
593-2-2543000 – Fax: 593-2-2523400 713-965-0006 – Fax: 713-965-0209
ventas@clipperenergy.com sales@clipperenergy.com
Sistemas de levantamiento por émbolos
FMC
Bombas de émbolo
Chicksan swivel joints
HYDRIL
Conexiones Premium para Tubing y Casing.
Pulsation Dampeners.
LUFKIN INDUSTRIES
Bombas y equipos para levantamiento mecánico
Cintas de Medición
K-TEK
Instrumentos para Control de Nivel y Flujo
OHM INTERNATIONAL
• Distribuidor mundial de equipos, materiales y repuestos eléctricos originales
de más de 390 fabricantes.
• Cables eléctricos Okonite, Houston Wire, etc.
• Motores eléctricos y Controles.
• Sistemas de Protección.
• Cajas de Conexión NEMA 4, 4X, 7, 7X, Class 1, Div 1 & 2, etc.
• Accesorios para Conexión.
5
www.clipperenergy.com
Juan León Mera 1741 y Orellana, 4to Piso 3355 West Alabama, Suite 1100
Quito – Ecuador Houston – Texas 77098 -USA
593-2-2543000 – Fax: 593-2-2523400 713-965-0006 – Fax: 713-965-0209
ventas@clipperenergy.com sales@clipperenergy.com
OPTICAL CABLE CORPORATION
• Cable de Fibra Óptica.
RIG-A-LITE
Equipos y Accesorios para Iluminación en áreas clasificadas
Equipo Eléctrico para Control y Distribución.
SPILL-TECH
Equipos para Control Ambiental tales como: Desnatadores,
Absorbentes, Dispersantes, Barreras, Botes de respuesta rápida, Equipos de
contingencia, etc.
TEK-RAP
Sistema de Revestimiento para tubería.
TEL-TRU
Instrumentos para Medición de Presión y Temperatura.
TYCO/ AG-CROSBY
• Safety Relief Valves
TEXAS PRODUCTS
Pup Joint API
Subs API
Herramientas para Workover y Wireline
WIRE MASTERS
Estranguladores de orificio
Choques ajustables tipo Merla
Bridas API
Anillos RTJ
WUAKESHA – PEARCE
Repuestos Wuakesha
6
www.clipperenergy.com
Juan León Mera 1741 y Orellana, 4to Piso 3355 West Alabama, Suite 1100
Quito – Ecuador Houston – Texas 77098 -USA
593-2-2543000 – Fax: 593-2-2523400 713-965-0006 – Fax: 713-965-0209
ventas@clipperenergy.com sales@clipperenergy.com
LISTA ALFABÉTICA DE PRODUCTOS DE DISTRIBUCIÓN
7
www.clipperenergy.com
Juan León Mera 1741 y Orellana, 4to Piso 3355 West Alabama, Suite 1100
Quito – Ecuador Houston – Texas 77098 -USA
593-2-2543000 – Fax: 593-2-2523400 713-965-0006 – Fax: 713-965-0209
ventas@clipperenergy.com sales@clipperenergy.com
*Master or Exclusive Distribution for Ecuador
8
www.clipperenergy.com
Juan León Mera 1741 y Orellana, 4to Piso 3355 West Alabama, Suite 1100
Quito – Ecuador Houston – Texas 77098 -USA
593-2-2543000 – Fax: 593-2-2523400 713-965-0006 – Fax: 713-965-0209
ventas@clipperenergy.com sales@clipperenergy.com
CAMERON® WKM® DEMCO® FOSTER®
THORNHILL CRAVER™ NUTRON® FCC-FLOW
CONTROL®
AHORA EN ECUADOR!
Clipper Energy Supply Co. tiene stock de válvulas de bola WKM®
1) 1/2 ” hasta 8” Serie 310 WKM
2) Ansi 150 a Ansi 600 (285 hasta 1480 psi WOG)
3) 3000 psi hasta 2” (roscadas)
4) Cuerpo de Acero al Carbono, Acabado de Acero Inox 316
5) Válvulas certificadas a NACE MR-01-75
6) Firesafe según API 6FA
7) Ensayos según API 6D
8) Locking Device para la seguridad en el campo
½ 16.6 3’ 189 GP
’’ GPM ’ M
¾ 25.1 4’ 542 GP
’’ GPM ’ M
1’ 89.9 6’ 790 GP
’ GPM ’ M
2’ 132 8’ 220 GP
’ GPM ’ 0 M
Cv Caída de Presión en las Válvulas Clase 150 Puerta Regular WKM Serie 310
(En GPM para producir 1 psi de caída de presión)
9
www.clipperenergy.com
Juan León Mera 1741 y Orellana, 4to Piso 3355 West Alabama, Suite 1100
Quito – Ecuador Houston – Texas 77098 -USA
593-2-2543000 – Fax: 593-2-2523400 713-965-0006 – Fax: 713-965-0209
ventas@clipperenergy.com sales@clipperenergy.com
REVESTIMIENTO PARA TUBERÍA
3 Capas en frío, el primero y único
Sistema de Protección Coextruido en el Mundo
Forma una excelente barrera anticorrosiva
10
www.clipperenergy.com
Juan León Mera 1741 y Orellana, 4to Piso 3355 West Alabama, Suite 1100
Quito – Ecuador Houston – Texas 77098 -USA
593-2-2543000 – Fax: 593-2-2523400 713-965-0006 – Fax: 713-965-0209
ventas@clipperenergy.com sales@clipperenergy.com
REVESTIMIENTO PARA TUBERÍA
11
www.clipperenergy.com
Juan León Mera 1741 y Orellana, 4to Piso 3355 West Alabama, Suite 1100
Quito – Ecuador Houston – Texas 77098 -USA
593-2-2543000 – Fax: 593-2-2523400 713-965-0006 – Fax: 713-965-0209
ventas@clipperenergy.com sales@clipperenergy.com
AUMENTE LA PRODUCCIÓN CON FILTRACIÓN MICRÓNICA
Filtros Clipper “CA” Absolutos
Una tecnología comprobada que
proteja su inversión.
o Filtración Absoluta:
2 micrones 99% (Beta 100)
10 micrones 99.98% (Beta 5000)
o Cumplen recomendaciones de
SPE:
Varios estudios de la Sociedad de
Ingenieros
Petroleros recomiendan el uso de
filtros absolutos en la intervención
de pozos.
o Calidad de Fabricación:
Calidad y materiales Americanos
con la mejor tecnología en la
industria petrolera.
o Un Seguro Barato:
El costo de filtración en una o Stock en Lago Agrio, Ecuador:
intervención de pozo es de $2000 Clipper mantiene un stock de los tamaños
a $4000. Compárese esto con más populares.
$1,000.000 o más en disminución
de la producción.
Los filtros de cartucho, Clipper “CA” Absolutos, pueden extender la vida y la
productividad de los pozos petroleros.
Los filtros micrónicos Clipper “CA” Absolutos son el mejor seguro para evitar daños y
la pérdida de producción.
12
www.clipperenergy.com
Juan León Mera 1741 y Orellana, 4to Piso 3355 West Alabama, Suite 1100
Quito – Ecuador Houston – Texas 77098 -USA
593-2-2543000 – Fax: 593-2-2523400 713-965-0006 – Fax: 713-965-0209
ventas@clipperenergy.com sales@clipperenergy.com
Notas Técnicas
Eficiencia del Filtro
Cociente Beta
(ß)Eficiencia del Filtro
(%)10099.00100099.90
500099.98
PermeabilidadTamaño PoroRango
Crítico(milidarces)(micras)(micras)10010.03.3 a
1.4*25015.85.2 a 2.250022.47.4 a 3.275027.49.1 a
3.9100031.610.5 a 4.5150038.712.9 a
5.5200044.714.9 a 6.3
13
www.clipperenergy.com
Juan León Mera 1741 y Orellana, 4to Piso 3355 West Alabama, Suite 1100
Quito – Ecuador Houston – Texas 77098 -USA
593-2-2543000 – Fax: 593-2-2523400 713-965-0006 – Fax: 713-965-0209
ventas@clipperenergy.com sales@clipperenergy.com
*Indica el rango de partículas sólidas que hay que filtrar del agua para proteger la
formación
No usar filtros, o usar filtros que no dan una protección absoluta es una economía
falsa. 30 Bls de fluido con 500 ppm de sólidos contienen 145.5 pulgadas3, esto
significa que en 30 bls hay suficientes contaminantes para llenar el 60% de los
huecos perforados y toda la porosidad en las zonas punzadas de 10 pies 4 dpp.
La Conclusión Es Lógica:
Utilice los filtros absolutos de la Serie Clipper CA que le dan:
• Filtración Absoluta de calidad americana, stock en el Oriente con buenos
precios, variedad de tamaños con capacidad de filtración
Absorbentes de Polipropileno para Petróleo
-Fibras de Polipropileno
meltblown, son
hidrofóbicas (repelen el
agua) y oleofílicas
(atraen el petróleo)
-Demande calidad,
compre los rollos Heavy
Weight de 3/8" y los
pads de 3/16" de
espesor, fabricados bajo
las patentes de 3M® en
EE-UU.
14
www.clipperenergy.com
Juan León Mera 1741 y Orellana, 4to Piso 3355 West Alabama, Suite 1100
Quito – Ecuador Houston – Texas 77098 -USA
593-2-2543000 – Fax: 593-2-2523400 713-965-0006 – Fax: 713-965-0209
ventas@clipperenergy.com sales@clipperenergy.com
Son los más conocidos de los pañales absorbentes, con propiedades oleofílicas e
hidrofóbicas Deben estar en cada sitio donde existe una probabilidad de pequeños o
grandes derrames que tienen que ser contenidos y absorbidos.
Clipper Energy tiene en Stock dos tamaños diferentes:
Pañales tipo P200S (Absorbe 40.5 Gal), por paca 3/16’’ x 15’’ x 19’’, 4 pies cúbicos,
(aprox. 200 pads)Rollos tipo R144H (Absorbe 77 Gal), por rollo 3/8’’x 38’’x144’’,
(10 pies cúbicos)
15
www.clipperenergy.com
Juan León Mera 1741 y Orellana, 4to Piso 3355 West Alabama, Suite 1100
Quito – Ecuador Houston – Texas 77098 -USA
593-2-2543000 – Fax: 593-2-2523400 713-965-0006 – Fax: 713-965-0209
ventas@clipperenergy.com sales@clipperenergy.com
Ahora en Ecuador, Sacos
de:
10 Kg. comprimidos USD
15 Kg. comprimidos USD
Aplicaciones
K-Sorb Hydrophobic®
Estabilización de derrames.
Contenimiento de líquidos
hidrocarburíficos.
Limpieza de tanques.
Stock en nuestras bodegas de Lago Agrio!
16
www.clipperenergy.com
Juan León Mera 1741 y Orellana, 4to Piso 3355 West Alabama, Suite 1100
Quito – Ecuador Houston – Texas 77098 -USA
593-2-2543000 – Fax: 593-2-2523400 713-965-0006 – Fax: 713-965-0209
ventas@clipperenergy.com sales@clipperenergy.com
OIL SPILL CLEAN UP MACHINE
“THE OILFANTE”
LBS PARA
ABSORBER 1
COSTO
PRODUCTO GAL DE
RELATIVO
HIDROCARBUR
O
K-Sorb Fibra
Hidrofóbic 0.6 USD 1.00
o
Musgo de fibra
de 2.10 USD 2.95
Madera
17
www.clipperenergy.com
Juan León Mera 1741 y Orellana, 4to Piso 3355 West Alabama, Suite 1100
Quito – Ecuador Houston – Texas 77098 -USA
593-2-2543000 – Fax: 593-2-2523400 713-965-0006 – Fax: 713-965-0209
ventas@clipperenergy.com sales@clipperenergy.com
5 Tons de K-SORB u otros absorbentes por hora
18
www.clipperenergy.com
Juan León Mera 1741 y Orellana, 4to Piso 3355 West Alabama, Suite 1100
Quito – Ecuador Houston – Texas 77098 -USA
593-2-2543000 – Fax: 593-2-2523400 713-965-0006 – Fax: 713-965-0209
ventas@clipperenergy.com sales@clipperenergy.com
BOLTING – EMPERNADO
19
www.clipperenergy.com
Juan León Mera 1741 y Orellana, 4to Piso 3355 West Alabama, Suite 1100
Quito – Ecuador Houston – Texas 77098 -USA
593-2-2543000 – Fax: 593-2-2523400 713-965-0006 – Fax: 713-965-0209
ventas@clipperenergy.com sales@clipperenergy.com
• Potencial: Torque hasta el equivalente a 63,000.00 lbs/pie, en acero seco,
10,000.00 lbs/pie con lubricante de molibdeno especial. (Ver fotografía)**
20
www.clipperenergy.com
Juan León Mera 1741 y Orellana, 4to Piso 3355 West Alabama, Suite 1100
Quito – Ecuador Houston – Texas 77098 -USA
593-2-2543000 – Fax: 593-2-2523400 713-965-0006 – Fax: 713-965-0209
ventas@clipperenergy.com sales@clipperenergy.com
TEXAS PRODUCTS, INC
DRILLING AND WELL SERVICE EQUIPMENT
21
www.clipperenergy.com
Juan León Mera 1741 y Orellana, 4to Piso 3355 West Alabama, Suite 1100
Quito – Ecuador Houston – Texas 77098 -USA
593-2-2543000 – Fax: 593-2-2523400 713-965-0006 – Fax: 713-965-0209
ventas@clipperenergy.com sales@clipperenergy.com
Fishing Tools o Heavy Duty Ditch
Magnets
• Overshots o Fishing Magnets
o Series 10 Sucker Rod o Fishing Magnet Chargers
Overshots
o Series 20 Short Catch Drilling, Milling and Cutting Tools
Sucker Rod Overshots
o Series 70 Short Catch • Junk Subs - Integral Welded Cup
Overshots Type
o Series 150 Releasing • Junk Subs - Removable
and Circulating Threaded Cup Type
Overshots • Rotary Subs / Cross-over Subs
• Series 150 Overshots • Junk Mills - Concave, Flat
Accessory Equipment Bottom, Econo Types
o Extension Sub • Taper Mills
o Oversized Guides • Pilot Mills
o Wall Hook Guides • Window Mills
o Hollow Mill Extension • String Mills
Subs • Tungsten Carbide, Tinning Rod,
o Hollow Mill Inserts Brazing Flux
o Mill Guides
o Cross-over Bushings • Standard External Cutters
• Lead Impression Blocks • Hydaulic External Cutters
o Impression Block • Internal Cutters
o Die Collars • Multi-String Pressure Pipe
• Fishing Tools - Internal Cutters
Catch
o Releasing Spears Accessory Fishing Tools
o Releasing Spear
Packoffs • Tubular Wireline Jars
o Releasing Spear Stop • Hydraulic Wireline Jars
Subs • Hydraulic Fishing Jars
o Taper Taps • 'Z' Type Hydraulic Jars
o Crank Shaft Rope Spears
• Jar Energizers
o Center Prong Rope
• Fishing Bumper Subs
Spears
• Lubricated Fishing Bumper
o Marine Spears
Subs
• Fishing Tools - Junk
• Surface Bumper Jars
Retrieval
• Hydraulic Drilling Jars
o Core Type Junk Baskets
• Mechanical Drilling Jars
o Reverse Circulation Junk
• Coarse Thread Safety Joints for
Baskets
Tubing, Drill Pipe and Washover
o Full Flow Reverse Junk
Pipe
Baskets
• Cable Hangers and Liners
• Light Duty Ditch Magnets
22
www.clipperenergy.com
Juan León Mera 1741 y Orellana, 4to Piso 3355 West Alabama, Suite 1100
Quito – Ecuador Houston – Texas 77098 -USA
593-2-2543000 – Fax: 593-2-2523400 713-965-0006 – Fax: 713-965-0209
ventas@clipperenergy.com sales@clipperenergy.com
QUALITY CONTROL STATEMENT
Clipper Energy Supply Co. will exercise various • Material safety data sheets or DOT
levels of quality control in regards to Purchasing, requirements for transport.
Shipping and Invoicing, depending on the needs • Installation, operation,service or
of the customer. This quality control will be similar manuals or information sheets
divided into three groups for new equipment, should be ordered to include with
such as pipe, valves, fittings and other similar shipment. If extra copies are available
materials. they will also be included with the
Quality Control Levels in Purchasing, Inspecting, billing.
Crating, Shipping and Billing C. Ordering of copies of MTR's when
applicable. These MTR's can be copies of
QC Level 1: originals, but must be legible and complete.
This is the minimum level of The name of the original supplier can be
quality/documentation control for goods changed on this quality control level, and
procured by Clipper for sale to customers. It will before being sent to the customer we can
include the following steps at a minimum level: change the name of the original purchaser,
A. Comparison of customer’s PO with using a Clipper tag. No other modification of
Supplier’s offer to assure they match. If any an MTR will be allowed under QC level 2.
discrepancies are found, or if items are not The materials for which MTR's are required
correctly specified or are illegible, the for level 2 are:
person quoter in charge will contact the
customer for clarification. • Steel fittings, forged, welded or
B. Ordering of following materials when formed, such as A105, A234 WPB, 316L,
Clipper’s PO is sent to the supplier: (if etc.
applicable) • Steel pipe, Seamless and ERW or
o Product catalog to accompany Fusion Welded, or Sprial Welded, to any
billing of the usual pipe norms (A53, A106, API
o Material safety data sheets or DOT 5L, Grades A-D), etc.
requirements for transport. • Steel plate and structurals to any
o Installation, operation,service or common industry standard (A36, A516,
similar manuals or information sheets A515, A283, etc.)
should be ordered to include with D. Under QC 2 for other components
shipment (sent to the warehouse, purchased by Clipper, a Manufacturer's
unless shipment will leave from some Compliance Certificate (MCC) is acceptable,
other point). If extra copies of these or, if unavailable then a Supplier's
materials are available they will be Compliance Certificate (SCC) from the
included with the documentation and wholesaler is acceptable.
billing to the customer (but not sent to E. Under QC 2 Clipper's warehouse will be
the bank with L/C documents) responsible for confirming that the MTR's
C. All quality control paperwork for QC 1 and/or MCC's and SCC's correspond
projects will be sent with billing to the generally to the materials shipped on the
customer, with no need to maintain copies order. The warehouse supervisor is
for Clipper Shipping Files. reponsible for filling in a QC Checklist for
projects which are QC2 or QC3. If the
QC Level 2: materials on a QC2 project do not pass
This is the intermediate level of through our warehouse, then we will provide
quality/documentation control for goods the supplier with a Supplier's QC Checklist,
procured by Clipper for sale to customers. It will on Clipper Stationary, unless the supplier
include the following steps at a minimum level: has provided Clipper previously with a copy
A. Comparison of customer’s PO with of their QC manual.
Supplier’s offer to assure they match. If any F. All Quality Control paperwork for QC2
discrepancies are found, or if items are not projects will be sent to customer with billing,
correctly specified or are illegible, the and will also be maintained in a copy in the
person in charge (see table below) will shipping file for a period of six months after
contact the customer for clarification. shipment has occurred.
B. Ordering of following printed materials when
Clipper’s PO is sent to the supplier: (if QC Level 3:
applicable) This is thehighest level of quality control and will
• Product catalog to accompany apply whenever third party quality control or
billing ASME/API/ISO requirements are in effect
according to customer’s PO. Tthis will also
23
www.clipperenergy.com
Juan León Mera 1741 y Orellana, 4to Piso 3355 West Alabama, Suite 1100
Quito – Ecuador Houston – Texas 77098 -USA
593-2-2543000 – Fax: 593-2-2523400 713-965-0006 – Fax: 713-965-0209
ventas@clipperenergy.com sales@clipperenergy.com
include any project that has more stringent o Steel plate and structurals to any
standards than usual, such as Charpy Impacts, common industry standard (A36, A516,
Hydrostatic Tests, Flow Tests, Operational Tests, A515, A283, etc.)
Ultrasonic, HIC requirements, etc. E. Under QC 3 for other components
A. Comparison of customer’s PO with purchased by Clipper, a Manufacturer's
Supplier’s offer to assure they match. If any Compliance Certificate (MCC) is acceptable,
discrepancies are found, or if items are not but a vendor’s supplier certificate is not
correctly specified or are illegible, the acceptable alone, without the supporting
Quoter in charge will contact the customer documentation from the original
for clarification. manufacturer.
B. Backup comparison of Customer PO, F. Under QC 3 Clipper's warehouse will be
Supplier Quote and Clipper PO by Clipper responsible for confirming that the MTR's
Expeditor and/or MCC's correspond exactly to the
C. Ordering of following printed materials when materials shipped on the order. The
Clipper’s PO is sent to the supplier: (if warehouse supervisor is reponsible for filling
applicable) in a QC Checklist for projects which are QC2
o Product catalog to accompany or QC3. If the materials on a QC2 project do
billing not pass through our warehouse, then we
o Material safety data sheets or DOT will provide the supplier with a Supplier's QC
requirements for transport. Checklist, on Clipper Stationary, unless the
o Installation, operation,service or supplier has provided Clipper previously
similar manuals or information sheets with a copy of their QC manual.
should be ordered to include with G. All Projects which have third party
shipment. If extra copies are available inspection requirements will be considered
they will also be included with the QC3. Also projects in which materials are
billing. supplied to manufacturers with API, ASME or
o MTR’s, which must be provided similar certifications which require materials
with Billing and with material shipment verification, will be handled as QC3, even if
to Clipper warehouse. (Advise seller of no third party inspection is required
requirement to provide MTR´s with according to the Customer PO.
Truck Bill of Lading. H. All Quality Control paperwork for QC3
D. Ordering of copies of MTR's is required. projects will be sent to customer with billing,
These MTR's can be copies of originals, as and with the materials if possible. Since this
long as they are signed in original by the is not possible with plate, pipe and
seller if the seller is not the original structurals, these originals must be sent
manufacturer,but in any case all MTR’smust with the billing, but for fittings, valves and
be legible and complete. The name of the other materials, MTR’s, in clear and legible
original supplier cannot be changed on this condition must be crated with the product,
quality control level of quality control. No and will also be maintained in a copy in the
modification of an MTR will be allowed under shipping file for a period of 5 years after
QC Level 3 The materials for which MTR's shipment has occurred, or until the file is
are required for level 3 destroyed after a minimum of 5 years from
o Steel fittings, forged, welded or the date of shipment.
formed, such as A105, A234 WPB, 316L,
etc. Jeffrey Casey
o Steel pipe, Seamless and ERW or President
Fusion Welded, or Sprial Welded, to any
of the usual pipe norms (A53, A106, API Maria Reyna Lopez
5L, Grades A-D), etc. Quality Documentation Manager
24
www.clipperenergy.com
Juan León Mera 1741 y Orellana, 4to Piso 3355 West Alabama, Suite 1100
Quito – Ecuador Houston – Texas 77098 -USA
593-2-2543000 – Fax: 593-2-2523400 713-965-0006 – Fax: 713-965-0209
ventas@clipperenergy.com sales@clipperenergy.com
25
www.clipperenergy.com
Juan León Mera 1741 y Orellana, 4to Piso 3355 West Alabama, Suite 1100
Quito – Ecuador Houston – Texas 77098 -USA
593-2-2543000 – Fax: 593-2-2523400 713-965-0006 – Fax: 713-965-0209
ventas@clipperenergy.com sales@clipperenergy.com