Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Features
•Output Current in Excess of 100 mA Pin 1.
2.
Vin
Vout
•Output Adjustable Between 1.2 V and 37 V 8 3. Vout
1 4. Adjust
•Internal Thermal Overload Protection 5. N.C.
SOIC-8
•Internal Short Circuit Current Limiting D SUFFIX 6. Vout
7. Vout
•Output Transistor Safe-Area Compensation CASE 751
8. N.C.
•Floating Operation for High Voltage Applications
•Standard 3-Lead Transistor Package
•Eliminates Stocking Many Fixed Voltages
•Pb-Free Packages are Available
•NCV Prefix for Automotive and Other Applications Requiring Site
and Control Changes
12 1
2
3 3
Simplified Application
STRAIGHT LEAD BENT LEAD
BULK PACK TAPE & REEL
Vin Vout AMMO PACK
LM317L
TO-92 Pin 1. Adjust
Z SUFFIX 2. Vout
R1 CASE 29 3. Vin
240
IAdj
Cin* Adjust + C **
O
0.1mF 1.0mF
ORDERING INFORMATION
R2 See detailed ordering and shipping information in the package
dimensions section on page 10 of this data sheet.
ǒR
Ǔ
Vout + 1.25V 1 ) 2 ) IAdjR2
R1
MAXIMUM RATINGS
Rating Symbol Value Unit
Input-Output Voltage Differential VI-VO 40 Vdc
Power Dissipation
Case 29 (TO-92)
TA = 25°C PD Internally Limited W
Thermal Resistance, Junction-to-Ambient RqJA 160 °C/W
Thermal Resistance, Junction-to-Case RqJC 83 °C/W
Vin
6.8V
350 18k
8.67k
500
130
400
5.1k
200k
http://onsemi.com
2
LM317L, NCV317LB
ELECTRICAL CHARACTERISTICS (VI-VO = 5.0 V; IO = 40 mA; TJ = Tlow to Thigh (Note 3); Imax and Pmax (Note 4);
unless otherwise noted.)
LM317L, LB, NCV317LB
Characteristics Figure Symbol Min Typ Max Unit
Line Regulation (Note 5) 1 Regline - 0.01 0.04 %/V
TA = 25°C, 3.0 V ≤ VI - VO ≤ 40 V
http://onsemi.com
3
LM317L, NCV317LB
VCC
VOH - VOL
Line Regulation (%/V) = x 100
* VOL
VIH VOH
VIL Vin Vout VOL
LM317L
Adjust R1 240 RL
1%
+
Cin 0.1mF IAdj CO 1mF
RL
(max Load)
Adjust 240 RL
R1 1% *
(min Load)
+
Cin 0.1mF IAdj CO 1.0mF
R2
*Pulse Testing Required: 1%
1% Duty Cycle is suggested.
Vin Vout
LM317L IL
Adjust
240
R1 1% Vref RL
IAdj +
VI Cin 0.1mF CO 1mF VO
ISET
To Calculate R2:
R2
Pulse Testing Required: Vout = ISET R2 + 1.250 V
1%
1% Duty Cycle is suggested. Assume ISET = 5.25 mA
http://onsemi.com
4
LM317L, NCV317LB
14.30V
D1 *
Adjust R1 240 RL
1% 1N4002
+
Cin 0.1mF CO 1mF VO
+
1.65K 10mF
R2 1% **
*D1 Discharges CAdj if Output is Shorted to Ground. **CAdj provides an AC ground to the adjust pin.
Figure 5. Ripple Rejection Test Circuit
Δ V out, OUTPUT VOLTAGE CHANGE (%)
0.4 Vin = 45 V
-0.2 70
Vin = 10 V IL = 40 mA
-0.4 Vout = 5.0 V f = 120 Hz
-0.6 IL = 5.0 mA to 100 mA 60 Vout = 10 V
Vin = 14 V to 24 V
-0.8
-1.0 50
-50 -25 0 25 50 75 100 125 150 -50 -25 0 25 50 75 100 125 150
TJ, JUNCTION TEMPERATURE (°C) TJ, JUNCTION TEMPERATURE (°C)
0.50 2.5
V in -Vout , INPUT-OUTPUT VOLTAGE
TJ = 25°C
IO, OUTPUT CURRENT (A)
0.40
2.0
IL = 100 mA
DIFFERENTIAL (V)
0.30
1.5
0.20 TJ = 150°C
IL = 5.0 mA
1.0
0.10
0 0.5
0 10 20 30 40 50 -50 -25 0 25 50 75 100 125 150
Vin-Vout, INPUT-OUTPUT VOLTAGE DIFFERENTIAL (V) TJ, JUNCTION TEMPERATURE (°C)
http://onsemi.com
5
LM317L, NCV317LB
5.0 100
4.5 90
IB , QUIESCENT CURRENT (mA)
Figure 10. Minimum Operating Current Figure 11. Ripple Rejection versus Frequency
1.260 80
Vout = Vref
1.250 65 IL = 10 mA
IL = 100 mA
60
1.240 55
50
Vin = 4.2 V
1.230 Vout = Vref 45
IL = 5.0 mA
40
1.220 35
-50 -25 0 25 50 75 100 125 150 -50 -25 0 25 50 75 100 125 150
TJ, JUNCTION TEMPERATURE (°C) TJ, JUNCTION TEMPERATURE (°C)
-0.2 8.0
-0.4
-0.6 6.0
-0.8
-1.0 4.0
-50 -25 0 25 50 75 100 125 150 -50 -25 0 25 50 75 100 125 150
TJ, JUNCTION TEMPERATURE (°C) TJ, JUNCTION TEMPERATURE (°C)
http://onsemi.com
6
LM317L, NCV317LB
DEVIATION (V)
1.5 0.3
1.0 CL = 1.0 mF; 0.2 CL = 1 mF; CAdj = 10 mF
0.5 CAdj = 10 mF 0.1
0 0 Vin = 15 V
-0.5 Vout = 10 V
-0.1 INL = 50 mA
Vout = 10 V CL = 0.3 mF; CAdj = 10 mF
-1.0
VOTLAGE CHANGE (V)
IL = 50 mA -0.2 TJ = 25°C
TJ = 25°C CL = 0;
ΔV in , INPUT
-1.5 -0.3
CURRENT (mA)
Without CAdj
I L , LOAD
1.0 100
Vin IL
0.5 50
0 0
0 10 20 30 40 0 10 20 30 40
t, TIME (ms) t, TIME (ms)
Figure 16. Line Transient Response Figure 17. Load Transient Response
APPLICATIONS INFORMATION
IAdj
R2
http://onsemi.com
7
LM317L, NCV317LB
Protection Diodes D1
When external capacitors are used with any IC regulator
it is sometimes necessary to add protection diodes to prevent 1N4002
the capacitors from discharging through low current points Vin Vout
into the regulator. LM317L
Figure 14 shows the LM317L with the recommended +
Cin R1 D2 CO
protection diodes for output voltages in excess of 25 V or
high capacitance values (CO > 10 mF, CAdj > 5.0 mF). Diode Adjust 1N4002
D1 prevents CO from discharging thru the IC during an input
R2 CAdj
short circuit. Diode D2 protects against capacitor CAdj
discharging through the IC during an output short circuit.
The combination of diodes D1 and D2 prevents CAdj from
discharging through the IC during an input short circuit.
Figure 19. Voltage Regulator with
Protection Diodes
+25V Vout R1 VO IO
LM317L
Vin 1.25k
D1
Adjust D1 1N4002
R2 1N914 Vin Vout
LM317L
* To provide current limiting of IO 500 D2
+
to the system ground, the source of
1N914
120 1.0mF
the current limiting diode must be tied to
a negative voltage below - 7.25 V. Adjust
1N5314 MPS2222
Vref
R2 ≥ 720 TTL
IDSS Control
1.0k
Vref VSS*
R1 =
IOmax + IDSS Minimum Vout = 1.25 V
Figure 20. Adjustable Current Limiter Figure 21. 5.0 V Electronic Shutdown Regulator
Iout
Vin R1 R2
LM317L
Vout
Adjust IAdj
Vin Vout
LM317L
240 1N4002
Vref 1.25 V
Ioutmax = + IAdj ^
R1 R1
Adjust 50k
http://onsemi.com
8
LM317L, NCV317LB
170 3.2
JUNCTION-TO-AIR ( °C/W)
130 2.4
110
ÎÎÎ ÎÎÎ
ÎÎÎÎÎÎÎÎÎ
Graph represents symmetrical layout 2.0
ÎÎÎÎÎÎÎÎÎ
90 2.0 oz. 1.6
L
Copper
70 1.2
L 3.0 mm
50 0.8
RθJA
30 0.4
0 10 20 30 40 50
L, LENGTH OF COPPER (mm)
Figure 24. SOP-8 Thermal Resistance and Maximum
Power Dissipation versus P.C.B. Copper Length
http://onsemi.com
9
LM317L, NCV317LB
ORDERING INFORMATION
Device Operating Temperature Range Package Shipping†
LM317LBD SOIC-8 98 Units / Rail
LM317LBDG SOIC-8 (Pb-Free) 98 Units / Rail
LM317LBDR2 SOIC-8 2500/Tape & Reel
LM317LBDR2G SOIC-8 (Pb-Free) 2500/Tape & Reel
LM317LBZ TO-92 2000 Units / Bag
LM317LBZG TO-92 (Pb-Free) 2000 Units / Bag
LM317LBZRA TO-92 2000 Tape & Reel
LM317LBZRAG TJ = -40°C to +125°C TO-92 (Pb-Free) 2000 Tape & Reel
LM317LBZRP TO-92 2000 Ammo Pack
LM317LBZRPG TO-92 (Pb-Free) 2000 Ammo Pack
NCV317LBDG* SOIC-8 (Pb-Free) 98 Units / Rail
NCV317LBDR2* SOIC-8 2500/Tape & Reel
NCV317LBDR2G* SOIC-8 (Pb-Free) 2500/Tape & Reel
NCV317LBZG* TO-92 (Pb-Free) 2000 Units / Bag
NCV317LBZRAG* TO-92 (Pb-Free) 2000 Tape & Reel
LM317LD SOIC-8 98 Units / Rail
LM317LDG SOIC-8 (Pb-Free) 98 Units / Rail
LM317LDR2 SOIC-8 2500/Tape & Reel
LM317LDR2G SOIC-8 (Pb-Free) 2500/Tape & Reel
LM317LZ TO-92 2000 Units / Bag
LM317LZG TO-92 (Pb-Free) 2000 Units / Bag
LM317LZRA TO-92 2000 Tape & Reel
TJ = 0°C to +125°C
LM317LZRAG TO-92 (Pb-Free) 2000 Tape & Reel
LM317LZRE TO-92 2000 Tape & Reel
LM317LZREG TO-92 (Pb-Free) 2000 Tape & Reel
LM317LZRM TO-92 2000 Ammo Pack
LM317LZRMG TO-92 (Pb-Free) 2000 Ammo Pack
LM317LZRP TO-92 2000 Ammo Pack
LM317LZRPG TO-92 (Pb-Free) 2000 Ammo Pack
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
* NCV devices: Tlow = -40°C, Thigh = +125°C. Guaranteed by design. NCV prefix is for automotive and other applications requiring site and
control change.
http://onsemi.com
10
LM317L, NCV317LB
PACKAGE DIMENSIONS
TO-92 (TO-226)
Z SUFFIX
CASE 29-11
ISSUE AM
NOTES:
A B STRAIGHT LEAD 1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
BULK PACK 2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
R IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P AND
P BEYOND DIMENSION K MINIMUM.
L
SEATING INCHES MILLIMETERS
PLANE K DIM MIN MAX MIN MAX
A 0.175 0.205 4.45 5.20
B 0.170 0.210 4.32 5.33
C 0.125 0.165 3.18 4.19
D 0.016 0.021 0.407 0.533
X X D G 0.045 0.055 1.15 1.39
H 0.095 0.105 2.42 2.66
G J 0.015 0.020 0.39 0.50
H J K 0.500 --- 12.70 ---
L 0.250 --- 6.35 ---
V C N 0.080 0.105 2.04 2.66
P --- 0.100 --- 2.54
SECTION X-X R 0.115 --- 2.93 ---
1 N V 0.135 --- 3.43 ---
NOTES:
A B BENT LEAD 1. DIMENSIONING AND TOLERANCING PER
R
TAPE & REEL ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
AMMO PACK 3. CONTOUR OF PACKAGE BEYOND
DIMENSION R IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P
P AND BEYOND DIMENSION K MINIMUM.
T
MILLIMETERS
SEATING
PLANE K DIM MIN MAX
A 4.45 5.20
B 4.32 5.33
C 3.18 4.19
D 0.40 0.54
X X D G 2.40 2.80
J 0.39 0.50
G K 12.70 ---
J N 2.04 2.66
V P 1.50 4.00
C R 2.93 ---
V 3.43 ---
SECTION X-X
1 N
http://onsemi.com
11
LM317L, NCV317LB
PACKAGE DIMENSIONS
SOIC-8
D SUFFIX
CASE 751-07
ISSUE AJ
NOTES:
1. DIMENSIONING AND TOLERANCING PER
-X- ANSI Y14.5M, 1982.
A 2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A AND B DO NOT INCLUDE
MOLD PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
8 5 PER SIDE.
5. DIMENSION D DOES NOT INCLUDE DAMBAR
B S 0.25 (0.010) M Y M PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 (0.005) TOTAL
1 IN EXCESS OF THE D DIMENSION AT
4 MAXIMUM MATERIAL CONDITION.
-Y- K 6. 751-01 THRU 751-06 ARE OBSOLETE. NEW
STANDARD IS 751-07.
MILLIMETERS INCHES
G
DIM MIN MAX MIN MAX
A 4.80 5.00 0.189 0.197
C N X 45 _ B 3.80 4.00 0.150 0.157
SEATING C 1.35 1.75 0.053 0.069
PLANE D 0.33 0.51 0.013 0.020
-Z- G 1.27 BSC 0.050 BSC
H 0.10 0.25 0.004 0.010
0.10 (0.004) J 0.19 0.25 0.007 0.010
H M J K 0.40 1.27 0.016 0.050
D
M 0_ 8_ 0 _ 8 _
N 0.25 0.50 0.010 0.020
S 5.80 6.20 0.228 0.244
0.25 (0.010) M Z Y S X S
SOLDERING FOOTPRINT*
1.52
0.060
7.0 4.0
0.275 0.155
0.6 1.270
0.024 0.050
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
http://onsemi.com LM317L/D
12