Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Ratings definitions:
Ratings are in accordance with ISO8528 and are based on a 50 Deg C ambient/air inlet temperature, 100 M altitude and 80%
relative humidity and are based on 0.8 lagging power factor.
Cylinders 12 12 12 12 12
Configuration V V V V V
Aspiration ` Turbocharged Turbocharged Turbocharged Turbocharged Turbocharged
Air/Water Air/Water Air/Air Air/Air Air/Air
charge cooled charge cooled charge cooled Charge cooled Chargecooled
Compression ratio 13:1 13:1 13:1 13:1 13:1
Bore x stroke mm 160 x 190 160 x 190 160 x 190 160 x 190 160 x 190
Displacement Litres 45.8 45.8 45.8 45.8 45.8
Mean piston speed m/sec 9.5 9.5 9.5 9.5 9.5
Thermal efficiency % 39.8 39.7 44 43.8 41
BMEP (PRP) kPa 1942 2106 2110 2317 2610
Cooling capacity Litres 201 201 210 210 210
Lub. oil capacity Litres 177 177 177 177 177
Airflow M3/s 28 28 32.4 32.4 37
Duct kPa 0.125 0.125 0.2 0.2 0.125
Exhaust gas flow M3/min 235 245 280 320 350
(ESP)
Exhaust back kPa 5 5 5 5 5
pressure
Control panel Powder coated steel enclosure flexibly mounted above alternator
terminal box
Alternatively the sets can be installed into an acoustic & weatherproof ISO container
Options
Each set within the Tempest range can be supplied with a number of options to tailor the set to
a specific duty.
Mains coolant heater Assists starting and load acceptance capability at low
ambient temperatures
Heat exchanger cooling For operation with remote radiator or cooling tower
Alternator winding and bearing RTD’s Provides temperature readout of windings and
bearing(s)
High specification fuel/water separator with alarm Minimises damage to fuel systems and provides alarm
contact indication
4 pole ACB
Motor operator
Earth fault protection
Custom built enclosures Purposely designed tailor made canopies for specific
installations such as water authorities
Critical exhaust silencer systems
Open Sets
We have a policy of continuous product development and reserve the right to alter specifications without
notice
August 2015
Issue 1