Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Hi Friend's
I appeared in the placement procedure of the company and faced all the rounds namely.
Aptitude:-
• Simplification
• Time and distance (average speed logic)
• Sudoku(3 by 3)
• Probability
• Permutation and combination
• English (Passage small one; fill in the blanks easy)
Technical Written:-
• DBMS
• C Language
• Microprocessors Basics
• Micro-controllers Basics
• Operating Systems Basics
• DCS Basics
• Number Conversions (Decimal, Binary, Octal, Hexadecimal)
Essay Writing:-
You have to write an essay on one of the topics and nearly 5-6 topics are provided. Just to
check whether you can write efficiently in English.
Communication Round:-
Question: Tell Me Something About Yourself.
Just to check whether you can speak fluently in English or not (simple one).
Technical Interview:-
1
• C Language (Basics)
HR Round:
If you clear the Technical Interview you have done 99% job. In HR they just ask about your
family background, any issue for shift changing Relocation. That's an easy one.
Best of Luck
Hi Friends
I am Balaji from siddharth Institute of Engineering and Technology. I attended for CSC held at
VIT , as we registered for VIT. CSC came on 28-01-2011.
The placement started at 10am and they gave brief introduction about their company and
benefits provided by them. At 11am they started the written exam.
Aptitude: (40 questions 40min)in half hour they will announce the short listed candidates for
Technical written
Technical: (75 questions 40min) along with that we should write essay (10min)
Aptitude paper is damn easy to attempt because they will give basic questions anybody can
attempt but some of the questions will very tough to attmept
You people start the paper from 26-40 you can complete it in 10-15min In 1-25 questions max
10 questions can be easy and find the easy questions and attempt it first and then you may
have 4-5 minutes left see the questions and make a guess on it you can easily score 30
marks...
questions may be
2.if A(0,y)=y+1
A(x,0)=x
A (x,y)=A(0,A(0,y))
A(0,0)=1
they find A(0,3), A(1,2) you will have 5 questions which can attended damn easy
2
you will get 2 questions some what tuff to find
4. total 75 students will be der, 25 know typing and 45 know short hand and 10 know neither
typing and shorthand. find how many know both typing and shorthand
5. synonym-1,
These are the questions in remember first 8 questions may be some what tough but can be
answered start from the last you can easily answered the questions coming to Technical
written As you already come to know that previous questions will be given....it is
truth...definitely you will be given the same questions without changing the question number
and options Refer the previous questions posted in the Fresher world and check the answer
once searching in the goggle. you can attempt more than 65 questions. there ends the exam
they will announce the short listed candidates for the next round with in half or one hour
Nearly 500 students attended among them 288 cleared the aptitude among 288 members
190 cleared the technical written These numbers will rise your anxiety that how many people
had selected finally let me explain it and the next day we prepared well and went to the VIT
campus and the panel members came and announced the batches per batch 10 members will
be der mine was 5th batch for each batch, they will give you a topic and should be talked for 1
min just like Jam session The HR people will be cool There will be two persons one men and
one women while the jam starts one will listen to your words and the other will correct your
essay we are all in the seminar hall and the panel people came and announced the names of
9 we thought that they are promoted to the next round we all shock that she told them that
you can leave for day every body stranded and can't understand what is going on finally we
came to know that they need only few people in the replacements talk they had given a
number that, they will recruit in the 1:30 ratio that mean for 30 people only one will be
selected all the people attended the jam section they disqualified entire batches...and they
selected few members. Here ends my journey I also disqualified from my college 2 members
are short listed for the Technical Interview.I am happy to tell that, he is my batch mate in the
project. I came to know that from him....they will check our confidence level.asked him to write
the program for prime number while he is writing he asked him to come...just they will test our
confidence. then he said you are promoted to the next round take the break and come again
and for the interview. If you complete the communication round( JAM) 75% you are selected...
3
Now total number of students attend is 500(approx)
• Aptitude-288
• Written-190
• Finally selected - 10
Directions (Q. 1-5): In these questions @, #,$,,% are used with different meanings as follows:
'P#Q' means 'P is neither greater than nor smaller than Q'.
In each of the following questions assuming the given statements to be true, find out which of the
two conclusions I and II given below them is/are definitely true.
6. Statements: F$W,W#T,T K
Conclusions: I. FK
II. W$K
7. Statements: R@M,M%D,D$H
Conclusions: I. R@H
II. DR
4
8. Statements: J$L,L#B,B@E
Conclusions: I. E$L
II. E%L
9. Statements: A$V,V#R,R@U
Conclusions: I. UR
II. U#R
Conclusions: I. F@H
II. G@J
Directions (Q.11-15): In each question below is given a statement followed by two assumptions
numbered I and II. An assumption is something supposed or taken for granted. You have to consider the
statement and the following assumptions and decide which of the assumptions is implicit in the
statement.
11. Statement: ?Enroll with us before 30th November to get the advantage of our 20% discount
offer?. -An advertisement by a coaching class
Assumptions:
II. Even those students who cannot afford to pay the fees of coaching classes may join this class.
12. Statement: ?Join our Yoga institute to keep yourself completely fit.?----An advertisement
Assumptions:
II. There is an awareness to a great extent about Yoga exercises among people.
13. Statement: If you want to get a good job you must have at least the basic knowledge of
computers.
5
Assumption:
II. Computer knowledge has been made an essential criterion by most of the companies nowadays.
14. Statement: As a measure to avoid occurrence of the epidemics due to monsoon the civic
authorities have organized free vaccination camps all over the city.
Assumptions:
II. people are generally aware about the need for vaccination.
15. Statements: In view of the large number of cases of suicides committed by the farmers in State X
the State Government has decided to waive off the agriculture loans granted to the farmers.
Assumptions:
I. This may stop further cases of suicides committed by the farmers in State X.
II. This move of the Government may be welcomed by the public at large.
Answers
1. (4)
2. (2)
3. (2)
4. (5)
5. (5)
6. (5)
7. (2)
8. (4)
9. (5)
10. (4)
11. (2)
12. (5)
13. (3)
14. (5)
15. (5)
NETWORKS
1) whn u open web browser, thn wht will happen wht do u do first thing?
2) wht u write first thing, i said DNS or webaddress concept thtn he asked complete web
adress like i told thn he asked meaning of each word-http,www,com etc
3) wht is URL
4) tel complete procedure how a site open after opening explorer
5) other layers understand DNS or not if not thn wht will happen (concept of mapping to
ip adress comes here) thy asked how mapping takes place and at wich layer
6) dns procedure use wht tcp/ip or osi
6
7) how many layers in tcp/ip and wich layers are extra in osi model
8) tcp/ip conection oriented or conectionless
9) wht is DNs he was trying to ask in detail but as i havnot read so i said tht
10) wht is arp
11) wht is rarp
12) wht is ATM(asynchronous mode transfer)
DBMS
1) wht is primary key
2) if ther is no primary key how will u uniquely identify each tuple (i said composite key
or super key)
3) diff between tuple and attribute
4) wht r anomalies explain each in detail (like insertion anomaly deletion and
modification anomaly)
5) wht is foreign key constraint
6) if i want to delete a tuple from a table having reference in so other table thn wht will
happen (concept of cascade comes else error)
7) wht r triggers explain
8) if i want to hav som tuples havind null value wht to do (outer join)
9) wht if i join two tables and no primary key (spurious tuples generate redundant data)
10) diff betweenoracle 9i and oracle 8
11) diff between dbms, rdbms, ordbms
OS
1) wht is os
2) wht is a process
3) diff between process and thread
4) if threads share data section wht will happen (concept of semaphore and crtitcal
section comes so )
5) wht is semaphore
6) wht other thing semaphore do except synchronisation
7) wht else happen in threads and process so deadlock concept comes
8) deadlocks, and i told abt 4 conditons of deadlocks also
9) in os wher do u use stacks and queues (like stacks for saving process satate , on system
call context switch etc and queue in scheduling so he asked do we hav only fifo
scheduling)
10) so types of scheduling
Data Structure
1) u hav fifteen boxes in kitchen and ur mom asked u to make foos for 1 month, wht will
u do to make food fast (thn concept of sorting came) i said i will put name tag on boxes
and thn sort thm in ascending order or i can put thm in order of color shade firstly lightest
and thn little darker and soon but tht can create confusion so first is better way
2)u hav 1000 names in unorder manner and i asked u to pick any name of my choice
randomly and thn giv me complete info of tht person so wht ds will u use
i said firstly i will sort thm thn i will use hashing/btrees as thy r faster in decreasing
search domain, thy asked wich sort will u use i said radix as good for strings , he asked if
7
one more name increase or decrease i said radix sort take linear time so doesnot affect
much on time he said if names r vary in length like one is venkateshraman other is raj i
said sort from 3rd last letter or use padding.
3) wht is heapsort, concept . wher u can apply it
4) wht all ds u know i said heaps binomial fiboncaai, liked list stacks queues trees arrays
etc
5) advantage and disadvantage of linked list and array over each other in temrs of
memory allocation
6) insert and delete a node in a linked list write a code(not from me) basically thy asked
asll application based question on data structure
java/c/c++
1) he write a java code of swapping to name via calling object as parameter and asked
whther result will reflect in main or not (as object passed as a reference so reuslt will be
reflected)
2) in java we use call by reference or call by value
3) wht r interfaces
4) diff between interfaces and abstraction
Company : CSC
2. data structured system devolepment (DSDD) is also called one of the below which
is evolved from work on information domain analysis
a.j.d.methodology
b.yourdon methodology
c.warnier-or methodology
d.Kevin-yenn methodology
3.
a. COCOMO estimation model is a single valued mode to compute software development
effort(and cost)as a function of program size expressed in estimated lines of codes.
b. PUTNAM model is single valued model assuming a specific distribution of effort over
8
life of software development project.
a. only a)is correct
b. only b)is correct
c.a ) and b)is correct
d.a)and b)is wrong
9
a.data cycle complexity
b.path complexity metric
c.cyclomatic complexity
d.none of above (question is not cleared so try to understand it)
9.a relatively small project is to be developed by a small team with good applocation
experience needing to fulfull less than rigid requirements. Using the basis
COCOMA model calculate the effort in person-months if the estimated lines of code
is 33200
a.95 person-months.
b.111 perso n-months
c.102 person-months
d.87 person-moths
10.CRC modeling provides a way for identifying classes their respomnsibilities and
their collaboration .a collabration refers to.
a.services provided by a class to other classes
b.requests sent by a class to ther classes to fulfill its own responsibility.
c.taxonomy of class types
10
d.characterstics of a class
12.a software was developed using component assembly model.after some time and
old componet is to be replaced by a new one without disturbing the overall
fuctioning of the softwarwe.following statements is true.
a.the new component should be developed in the same language as the old one
b.the new component should have exactly the same attribute as the old one.
c.the new component should inplement exactly the same methods as the old one.
d.The new component should provide exactly the same interface as the old one.
13.a real time system is to be developed .the choice of database would most
appropriately be
a.distributed databases because the reduce redundancy of data.
b.distributed databases because the facilate parallel data processing through miultitasking
c.centralized databases because of high computing power the server.
d.centralized databases because they provide better deadlock handling mechanism .
11
c.$!
d.$$
21.what is socket ? how many required to make connection between two systems
12
a.a socket is 2-tuple having protocol and port number and requires 4sockets
b.a socket is 3-tuple having protocol address and port number and requires 4 sockets
c.a socket is 2-tuple having protocol and address and requires 2 sockets
d.a socket is 3-tuple having protocol address and port number and requires 2 sockets
22.TCP/IP runs on
a.an Ehtener
b.a token ring
c.an x.25 net
d.all of the above
13
d.none
26. what would be the output of the following echo command in sequence?
$x=1
$echo'x=2'>setx
$sh setx
$echo $x
$x=3
$setx
$echo $x
a.2,2
b.1,2
c2,3
d.1,3
29.which of the following instruction is used to load 2050h address toHL register
pair?
a.LOD H,2050H
14
B.LOAD H,2050H
C.LXIH,2050H
D.LDAH,2050H
30.what will be the value of the accumalator having AAH after executing RLC
instruction twice?
a.55h
b.abh
c.bah
d.aah
31.the top of the stack contains 5A&next byte down the stack is 14(all address in
hexadecimal) the stack pointer (sp) containts 3A56.an instruction call subroutint
stored at location 67AE whick is 3 bytes long is located at memory address 013F.
What shall be the contents of Program Counter, SP and stack respectively after the
call instruction is executed?
PC SP stack
a. 67AE 3A58 42,01,5A,14
b. 0142 3A58 01,42,5A,14
c. 67AE 3A56 42,01,5A,14
d. 0142 3A56 01,42,5A,14
32. Time oriented metrics is one of the below i.e. times it takes to analyze change
request, design an appropriate modification, implement the change, test it and
distribute to all users
Hi friends, I am Dhivyaa. K.S from Ganadipathy Tulsi’s Engineering College, Vellore. Recently I
had appeared for off-campus interview conducted by ANNA UNIVERSITY PLACEMENT
PROGRAMME on 17th & 18th June 2010 at Sai Ram Engineering College, Chennai and am very
glad to say that I got selected. Here I would like to share my interview experience with you.
15
• Aptitude
• Technical
• Group Discussion
• Technical HR
• Personal Interview
I. APTITUDE
In this round, they asked 40 questions in 40 minutes which includes
You have to fill the numbers from 1-9 in the boxes, such that it should have 15 from
top to bottom and across the diagonal, then you would have the box as like the one
below:
825
147
693
From this you might have questions like, summing up the numbers which are right
and left to the number 2. For us, three questions were asked from this:
• Some four questions were asked from the four different passages.
• One problem based on age. (easy)
• Three questions based on Speed and Distance.
• One from permutation
• Percentage ( easy )
• Few questions based on functions. (very easy one)
II. TECHNICAL
It consists of 75 questions and duration is 40 minutes. We had the questions from previous
year papers.
2.any large single block of data stored in a database, such as a picture or sound file, which
does not include record fields, and cannot be directly searched by the database’s search
engine.
a) TABLE
b) BLOB
c) VIEW
16
d) SCHEME
Ans: b
3.A reserved area of the immediate access memory used to increase the running speed of the
computer program.
a) session memory
b) bubble memory
c) cache memory
d) shared memory
Ans: c
4.a small subnet that sit between a trusted internal network and an untruster external
network, such as the public internet.
a) LAN
b) MAN
c) WAN
d) DMZ
Ans: d
5.technologies that use radio waves to automatically identify people or objects,which is very
similar to the barcode identification systems,seen in retail stores everyday.
a) BLUETOOTH
b) RADAR
c) RSA SECURE ID
d) RFID
Ans: d
6.main(){
float fl = 10.5;
double dbl = 10.5
if(fl ==dbl)
printf(“UNITED WE STAND”);
else
printf(“DIVIDE AND RULE”)
}
7.main(){
static int ivar = 5;
printf(“%d”,ivar--);
if(ivar)
main();
}
17
What is the output?
a)1 2 3 4 5
b) 5 4 3 2 1
c)5
d) Compiler error:main cannot be recursive function.
Ans: b
8.main()
{
extern int iExtern;
iExtern = 20;
printf(“%d”,iExtern);
}
10.main()
{
void vpointer;
char cHar = ‘g’, *cHarpointer = “GOOGLE”;
int j = 40;
vpointer = &cHar;
printf(“%c”,*(char*)vpointer);
vpointer = &j;
printf(“%d”,*(int *)vpointer);
vpointer = cHarpointer;
printf(“%s”,(char*)vpointer +3);
}
18
11.#define FALSE -1
#define TRUE 1
#define NULL 0
main() {
if(NULL)
puts(“NULL”);
else if(FALSE)
puts(“TRUE”);
else
puts(“FALSE”);
}
12.main() {
int i =5,j= 6, z;
printf(“%d”,i+++j);
}
13.main() {
int i ;
i = accumulator();
printf(“%d”,i);
}
accumulator(){
_AX =1000
}
What is output?
a)1
b)10
c)100
d)1000
Ans: d
14.main() {
int i =0;
while(+(+i--)!= 0)
i- = i++;
19
printf(“%d”,i);
}
15.main(){
int i =3;
for(; i++=0;)
printf((“%d”,i);
}
16. main(){
int i = 10, j =20;
j = i ,j?(i,j)?i :j:j;
printf(“%d%d”,i,j);
}
17.main(){
extern i;
printf(“%d\t”,i);{
int i =20;
printf(“%d\t”,i);
}
}
20
18.int DIMension(int array[]){
return sizeof(array/sizeof(int);}
main(){
int arr[10];
printf(“Array dimension is %d”,DIMension(arr));
}
What is output?
a) array dimension is 10
b) array dimension is 1
c) array dimension is 2
d) array dimension is 5
Ans: b
19. main(){
void swap();
int x = 45, y = 15;
swap(&x,&y);
printf(“x = %d y=%d”x,y);
}
void swap(int *a, int *b){
*a^=*b, *b^=*a, *a^ = *b;
20.main(){
int i =257;
int *iptr =&i;
printf(“%d%d”,*((char*)iptr),*((char *)iptr+1));
}
What is output?
a)1, 257
b)257 1c)0 0d)1 1
Ans: d
21.main(){
int i =300;
char *ptr = &i;
*++ptr=2;
printf(“%d”,i);
}
What is output?
a) 556
b) 300
21
c) 2
d) 302
Ans: a
22.#include
main(){
char *str =”yahoo”;
char *ptr =str;
char least =127;
while(*ptr++)
least = (*ptr
printf(“%d”,least);
}
24.void main(){
int I =10, j=2;
int *ip = &I ,*jp =&j;
int k = *ip/*jp;
printf(“%d”,k);
}
25.main(){
char a[4] =”GOOGLE”;
printf(“%s”,a);
}
22
d) linkage error.
Ans: c
27.There is a circuit using 3 nand gates with 2 inputes and 1 output,f ind the output.
a) AND
b) OR
c) XOR
d) NAND
Ans: b (not sure)
30.What action is taken when the processer under execution is interrupted by TRAP in
8085MPU?
a) Processor serves the interrupt request after completing the execution of the current
instruction.
b) processer serves the interrupt request after completing the current task.
c) processor serves the interrupt immediately.
d) processor serving the interrupt request depent deprnds upon the priority of the current task
under execution.
Ans: a
23
c) flag register
d) flag register part of PSW (program status word)
Ans: c
33.The OR gate can be converted to the NAND function by adding----gate(s)to the input of the
OR gate.
a) NOT
b) AND
c) NOR
d) XOR
Ans: a
35.An 8085 based microprocessor with 2MHz clock frequency,will execute the following chunk
of code with how much delay?
MVI B,38H
HAPPY: MVI C, FFH
SADDY: DCR C
JNZ SADDY
DCR B
JNC HAPPY
a) 102.3
b)114.5
c)100.5
d)120
36.In 8085 MPU what will be the status of the flag after the execution of the following chunk of
code.
MVI B,FFH
MOV A,B
CMA
HLT
a) S = 1, Z = 0, CY = 1
b) S = 0, Z = 1, CY = 0
c) S = 1, Z = 0, CY = 0
d) S = 1, Z = 1 ,CY = 1
37.A positive going pulse which is always generated when 8085 MPU begins the machine
cycle.
a) RD
b) ALE address latch enable…
c) WR
24
d) HOLD
Ans: b
38.when a ----- instruction of 8085 MPU is fetched , its second and third bytes are placed in the
W and Z registers.
a) JMP
b) STA
c) CALL
d) XCHG
Ans: c
39.what is defined as one subdivision of the operation performed in one clock period.
a) T- State
b) Instruction Cycle
c) Machine Cycle
d) All of the above
Ans: a
40.At the end of the following code, what is the status of the flags.
LXI B, AEC4H
MOV A,C
ADD HLT
a) S = 1, CY = 0, P = 0 , AC = 1
b) S =0 , CY = 1, P = 0,AC = 1
c) S = 0, CY = 1, P = 0 , AC = 1
d) S = 0, CY = 1, P = 1 , AC = 1
41.In 8051 micro controller what is the HEX number in the accumulator after the execution of
the following code.
MOV A,#0A5H
CLR C
RRC A
RRC A
RL A
RL A
SWAP A
a)A6
b)6A
c)95
d)A5.
Ans: a
44.K6 processor
25
a) Hitachi b) toshiba c) zilog d) AMD. Ans: d
45. What is the control word for 8255 PPI,in BSR mode to set bit PC3.
a)0EH b)0FH c)07H d)06H. ans:c
46.The repeated execution of a loop of code while waiting for an event to occur is called
---------.The cpu is not engaged in any real productive activity during this period,and the
process doesn’t progress towards completion.
a) dead lock b) busy waiting c) trap door d) none.
Ans: b
48.Either all actions are carried out or none are. users should not have to worry about the
effect of incomplete transctions.DBMS ensures this by undoing the actions of incomplete
transctions.this property is known as
a) Aggregation b) atomicity c) association d) data integrity.
ans : B…
49.------ algorithms determines where in available to load a program. common methods are
first fit,next fit,best fit.--------- algorithm are used when memory is full , and one process (or
part of a process) needs to be swaped out to accommodate a new program.The -------------
algorithm determines which are the partions to be swaped out.
a) placement, placement, replacement
b) replacement, placement, placement
c) replacement, placement, replacement
d) placement, replacement, replacement Ans: D
50.Trap door is a secret undocumented entry point into a program used to grant access
without normal methods of access authentication. A trap is a software interrupt,usually the
result of an error condition.
a)true b)false.
Ans: A
51. Given a binary search tree,print out the nodes of the tree according t5o post order
traversal.
4
/\
25
/\
13
a)3,2,1,5,4. b)1,2,3,4,5. c)1,3,2,5,4. d)5,3,1,2,4. Ans: C
26
53.which of the following needs the requirement to be a binary search tree.
a) 5
/\
27
/
1
b) 5
/\
67
c) 5
/\
27
/\
16
d) none.
54.in recursive implementations which of the following is true for saving the state of the steps
a) as full state on the stack
b) as reversible action on the stack
c) both a and b
d) none
27
that for every functional dependency XY,X must be a candidate key
a)1 NF
b)2 NF
c)3 NF
d)5 NF
59) a _________sub query can be easily identified if it contains any references to the parent sub
query columns in the _________ clause
A) correlated ,WHERE
b) nested ,SELECT
c) correlated,SELECT
d) none
60) hybrid devise that combines the features of both bridge and router is known as
a)router b)bridge c)hub d)brouter
65.In binary search tree which traversal is used for ascending order values
a) Inorder b)preorder c)post order d)none
Ans: a
66.You are creating an index on ROLLNO colume in the STUDENT table.which statement will
you use?
a) CREATE INDEX roll_idx ON student, rollno;
b) CREATE INDEX roll_idx FOR student, rollno;
c) CREATE INDEX roll_idx ON student( rollno);
28
d) CREATE INDEX roll_idx INDEX ON student (rollno);
Ans: c
67.A________class is a class that represents a data structure that stores a number of data
objects
a. container b.component c.base d.derived
Ans: a
71.Let A and B be nodes of a heap,such that B is a child of A. the heap must then satisfy the
following conditions
a)key(A)>=key(B)
b)key(A)
c)key(A)=key(B)
d)none
29
until u return to the original node.
Ans: c
74.sentinel node at the beginning and /or at the end of the linkedlist is not used to store the
data
a) true
b) false
Ans:a
2. GROUP DISCUSSION
CSC is mainly looking in your communication and how well you are confident at. These guys
are giving chance to everyone in putting their own points. i.e., they are conducting it in orderly
fashion. She gave us: Should sex education be included in academic of school children. I was
the first to start the GD, so, I went with the topic and No time was given to prepare. Results
were immediately announced. In my batch, only one got eliminated. So guys, be confident
while putting your points.
3. TECHNICAL HR
Initially the HR was started with my project, I explained my project entirely. And he raised few
questions from that. I answered for all those. So, you must have thorough knowledge of your
project you had done.
Besides, he raised questions like difference between array and Linked list then Stack, Queue
from Data Structures, DBMS, and Operator Overloading, paging concept from Operating
System, few concepts from Mobile Computing and some more. It took some 25-30 minutes for
me.
Depending on the panel, you will get questions. You brush up all the concepts from Data
Structure, DBMS, Operating System and Programming Languages.
If you are belonging to ECE, concentrate much on Microprocessor. (This info was given by my
friend).
You just give your answers if you are sure, otherwise, you say, sorry mam/sir, at present, I
could not recollect. Do not try to give related or fake answers.
4. PERSONAL INTERVIEW
Once you get into this round, you can stay relaxed. He asked me the general questions like,
30
friend said the same thing before.)
But, I do not like to lie, so I said him, I gathered from my friends.
Once you get info about recruiting process, you please go through that company website.
Then he asked whether you are comfort when you are relocated to different locations and
night shifts, I confidently said, Yes sir.
Guys be honest, confident and success will be yours. GOOD LUCK…!!!!!!!!! SEE YOU AT
CSC…!!!!!!!
31