Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Minimum Order for Free UK Delivery • £100 (Nett invoice value). Returns (cont) • Any unauthorised returns will not be processed and goods will be scrapped
after 30 days if return is not resolved by the customer.
Carriage Charges • £12.50 carriage for orders under £100. • A minimum 30% re-stocking charge will be applied on all agreed returns
• Same day or express delivery at customer request - additional charges at • Non-standard finishes, non-stocked lines and special/bespoke items will
cost. not be accepted back for credit.
Same Day Despatch • Unless agreed otherwise with our Customer Care Centre, orders requiring Faulty Returns • All requests for product to be returned, which is claimed to be faulty, must
same day despatch must be received before 3.00pm. Supply/despatch first be authorised by the Technical Support dept.
will be subject to availability and cannot be guaranteed. The Technical Support dept will arrange collection of product for
inspection by our Quality dept. If the product is found to be faulty
Additions to Existing Orders • These will only be accepted if original order has not already been due to materials/assembly/etc and within warranty, then a free of charge
processed/entered by us. replacement or credit will be issued (whichever is preferred by the
customer.) (Please note customers without accounts will be eligible for
Order Amendments and/or • All amendments and cancellations must be agreed/approved in writing by free of charge replacement(s) only.)
Cancellations our Customer Care Centre. Where the product is found not to be faulty, or if the fault has occurred
• In some cases it is possible that these will not be accepted or a due to misuse/abuse/mis-specification etc, then the product will be
cancellation/amendment charge may be applied. returned to the customer, who will be liable for the collection and
• Cancellations/amendments for special, bespoke or 'to order' items will not associated carriage costs.
be accepted if goods have already been produced or are already in transit
to us from one of our overseas facilities/suppliers. The fact that we have Delivery Discrepancies • Delivery discrepancies (shortages etc) MUST be reported/confirmed in
not yet despatched such items to you does not mean an amendment or writing within 14 working days of goods being delivered.
cancellation can or will be accepted. • Requests for Proof of Delivery MUST be received in writing within 14 days
of date of invoice.
Prices/Discounts • Requests for confirmation of Discounts and/or Nett prices need to be
made to our Customer Care Centre in writing via fax or email - these will Site Visits • Where required/requested/appropriate/necessary, IRST will arrange for a
not be confirmed verbally (UK Mainland) technical representative/engineer of the Company to attend site in order
• Only Retail Prices will be confirmed verbally to investigate a reported fault.
• This service will be provided free of charge initially - however, where it is
Delivery Dates • Planned Despatch Dates (PDD) is an indicator of when goods are subsequently proved that the fault/problem was not as a direct result of
scheduled to be despatched - these dates may be subject to change from faulty manufacture or defect in materials and it is proved that the problem
time to time without advance notice. had developed resulted due to other factors (incorrect installation, wiring,
incorrect specification, abuse, misuse etc) a minimum site visit charge of
Returns • No goods will be accepted back for credit unless authorisation has been £250 will be invoiced.
obtained from our Customer Care Centre and an Authorised Returns Note • In some instances, a purchase order may be requested/required prior to a
(valid for 30 days) has been issued by a member of the Customer Care site visit being made/agreed.
Centre Team.
• Where a return has been authorised, goods need to be sent back by the Contra Charges • Unless specifically agreed in writing in advance by IRST, the Company will
customer. If Ingersoll Rand Security Technologies (IRST) are required to not accept any Contra Charges, costs, fines or penalties in relation to
arrange collection, a minimum charge of £20 will be made for such possible late supply of product/orders/services etc.
collection. If return visits have to be made to collect goods, further
subsequent charges will be made.
• If upon receipt the goods are found to be in a 'non saleable' condition, no
credit will be issued and goods will be returned and an Admin charge
(min. £25) may be invoiced.
®
Customer Care Centre Tel: 0191 430 2500 Fax: 0191 229 1789
UK Oval Range
UK Oval Range 1.2 - 1.3
Astral Range
Astral Euro Range 1.3 - 1.4
Astral Oval Range 1.4
Astral Rim & Mortice Range 1.5
Astral Keys & Passing Charges 1.5
Astral S Euro Range 1.5 - 1.6
AP3 Range
AP3 Euro Range 1.6 - 1.7
AP3 Keys & Passing Charges 1.8
All Ranges - Accessories 1.8
Special Applications 1.8
CISA Cylinders - C2000 Euro Profile Range
Euro Double Cylinder SB NP PB Misc Unit
0G300.07 C2000 Euro Double 30/30 (59mm Overall) - 3 Keyed 12.34 12.34 Each
0G300.12 C2000 Euro Double 30/40 (69mm Overall) - 3 Keyed 13.48 13.48 Each
0G300.13 C2000 Euro Double 35/35 (69mm Overall) - 3 Keyed 12.34 12.34 Each
0G300.17 C2000 Euro Double 30/50 (79mm Overall) - 3 Keyed 15.76 15.76 Each
0G300.18 C2000 Euro Double 40/40 (79mm Overall) - 3 Keyed 15.76 15.76 Each
0G300.19 C2000 Euro Double 35/45 (79mm Overall) - 3 Keyed 15.76 15.76 Each
0G300.20 C2000 Euro Double 30/60 (89mm Overall) - 3 Keyed 18.05 18.05 Each
0G300.21 C2000 Euro Double 40/50 (89mm Overall) - 3 Keyed 18.05 18.05 Each
0G300.23 C2000 Euro Double 50/50 (99mm Overall) - 3 Keyed 20.33 20.33 Each
0G300.25 C2000 Euro Double 40/60 (99mm Overall) - 3 Keyed 20.33 20.33 Each
0G300.28 C2000 Euro Double 35/40 (74mm Overall) - 3 Keyed 15.76 15.76 Each
0G300.29 C2000 Euro Double 45/45 (89mm Overall) - 3 Keyed 18.05 18.05 Each
0G300.30 C2000 Euro Double 40/45 (84mm Overall) - 3 Keyed 16.88 16.88 Each
0G300.31 C2000 Euro Double 35/50 (84mm Overall) - 3 Keyed 16.88 16.88 Each
0G300.32 C2000 Euro Double 35/55 (89mm Overall) - 3 Keyed 18.05 18.05 Each
0G300.42 C2000 Euro Double 40/55 (94mm Overall) - 3 Keyed 19.25 19.25 Each
0G300.43 C2000 Euro Double 45/55 (99mm Overall) - 3 Keyed 20.33 20.33 Each
0G300.54 C2000 Euro Double 45/60 (104mm Overall) - 3 Keyed 21.55 21.55 Each
1.1
CISA Cylinders - C2000 Euro Profile Range
Euro Single Cylinder SB NP PB Misc Unit
0G304.02 C2000 Euro Single 30/10 (39.5mm Overall) - 3 Keyed 11.05 11.05 Each
0G304.03 C2000 Euro Single 40/10 (49.5mm Overall) - 3 Keyed 11.33 11.33 Each
0G304.07 C2000 Euro Single 35/10 (44.5mm Overall) - 3 Keyed 11.05 11.05 Each
1.2
CISA Cylinders - UK Oval Range
UK Oval Single Cylinder SB NP PB Misc Unit
09026.02 UK Oval Single 33/10 (42.5mm Overall) - 3 Keyed 13.22 13.22 Each
09026.03 UK Oval Single 37/10 (46.5mm Overall) - 3 Keyed 13.77 13.77 Each
09026.07 UK Oval Single 43/10 (52.5mm Overall) - 3 Keyed 14.32 14.32 Each
1.3
CISA Cylinders - Astral Euro Range
Euro Cylinder with Turn SB NP PB Misc Unit
0A312.42 Astral Euro Cylinder & Turn 40/55 (94mm Overall) - 3 Keyed 29.57 29.57 Each
0A312.43 Astral Euro Cylinder & Turn 45/55 (99mm Overall) - 3 Keyed 30.67 30.67 Each
0A312.84 Astral Euro Cylinder & Turn 45/40 (84mm Overall) - 3 Keyed 27.33 27.33 Each
0A312.85 Astral Euro Cylinder & Turn 45/35 (79mm Overall) - 3 Keyed 26.20 26.20 Each
1.4
CISA Cylinders - Astral Rim & Mortice Range
Rim Nightlatch Cylinder SB NP PB Misc Unit
0A510.50 Astral Rim Night Latch Cylinder - 2 Keyed 14.52 14.52 Each
1.5
CISA Cylinders - Astral S Euro Range
Euro Double Cylinder SB NP PB Misc Unit
0A3S1.30 Astral S Euro Double 40/45 (84mm Overall) - 3 Keyed 34.74 34.74 Each
0A3S1.31 Astral S Euro Double 35/50 (84mm Overall) - 3 Keyed 34.74 34.74 Each
0A3S1.32 Astral S Euro Double 35/55 (89mm Overall) - 3 Keyed 36.20 36.20 Each
0A3S1.39 Astral S Euro Double 45/50 (94mm Overall) - 3 Keyed 37.64 37.64 Each
0A3S1.42 Astral S Euro Double 40/55 (94mm Overall) - 3 Keyed 37.64 37.64 Each
0A3S1.43 Astral S Euro Double 45/55 (99mm Overall) - 3 Keyed 39.09 39.09 Each
1.6
CISA Cylinders - AP3 Euro Range
Euro Double Cylinder SB NP PB Misc Unit
0H3S0.23 AP3 Euro Double 50/50 (99mm Overall) - 3 Keyed 68.09 68.09 Each
0H3S0.25 AP3 Euro Double 40/60 (99mm Overall) - 3 Keyed 68.09 68.09 Each
0H3S0.28 AP3 Euro Double 35/40 (74mm Overall) - 3 Keyed 62.46 62.46 Each
0H3S0.29 AP3 Euro Double 45/45 (89mm Overall) - 3 Keyed 65.96 65.96 Each
0H3S0.30 AP3 Euro Double 40/45 (84mm Overall) - 3 Keyed 64.91 64.91 Each
0H3S0.31 AP3 Euro Double 35/50 (84mm Overall) - 3 Keyed 64.91 64.91 Each
0H3S0.32 AP3 Euro Double 35/55 (89mm Overall) - 3 Keyed 65.96 65.96 Each
0H3S0.43 AP3 Euro Double 45/55 (99mm Overall) - 3 Keyed 68.09 68.09 Each
1.7
CISA Cylinders - AP3 Keys & Passing Charges
AP3 Additions SB NP PB Misc Unit
M.AP3.D AP3 Extra Servant (Differ) Keys Suppied with Order 4.96 Each
1.8
This section includes:
• C2000 Euro Range
• UK Oval Range
• Primus S Euro & Oval Range
• 7500 Series Euro & Oval Range
• Astral Euro & Oval Range
• Astral S Euro Range
C2000 Euro Range Astral Euro & Oval Range CISA - Masterkey Systems Finishes
C2000 Euro Range 2.1 - 2.2 Astral Euro Range 4.1 - 4.2 SB Satin brass
NP Nickel plated
C2000 Rim & Mortice Range 2.2 Astral Oval Range 4.2
PB Polished brass
C2000 Keys & Passing Charges 2.2 Astral Rim & Mortice Range 4.2 - 4.3
C2000 Other Cylinders 2.2 Astral Keys & Passing Charges 4.3
UK Oval Range Astral S Euro Range 4.3 - 4.4
UK Oval Profile Range 2.2 - 2.3 Astral S Keys & Passing Charges 4.4
2.1
CISA Master Key Systems - C2000 Euro Profile Range
Euro Single Cylinder PB SB NP PC SNP Misc Unit
M.0G304.02 C2000 Euro Single 30/10 (39.5mm Overall) - Differ Keys Not Included 10.62 10.62 Each
M.0G304.03 C2000 Euro Single 40/10 (49.5mm Overall) - Differ Keys Not Included 10.90 10.90 Each
M.0G304.07 C2000 Euro Single 35/10 (44.5mm Overall) - Differ Keys Not Included 10.62 10.62 Each
2.2
CISA Master Key Systems - UK Oval Profile Range
UK Oval Double Cylinder PB SB NP PC SNP Misc Unit
M.09010.80.0 UK Oval Double 43/43 (85mm Overall) - Differ Keys Not Included 21.22 21.22 Each
2.3
CISA Master Key Systems - Primus S Euro Range (Unrestricted)
Euro Cylinder With Turn SNP PB PC Misc Unit
MSEK3030T Primus S Euro Cylinder & Turn 60MM MK - Differ Keys Not Included 23.35 27.89 37.80 Each
MSEK3035T Primus S Euro Cylinder & Turn 65MM MK - Differ Keys Not Included 37.11 43.70 51.57 Each
MSEK3040T Primus S Euro Cylinder & Turn 70MM MK - Differ Keys Not Included 37.11 43.70 51.57 Each
MSEK3045T Primus S Euro Cylinder & Turn 75MM MK - Differ Keys Not Included 37.11 43.70 51.57 Each
MSEK3050T Primus S Euro Cylinder & Turn 80MM MK - Differ Keys Not Included 37.11 43.70 51.57 Each
MSEK3055T Primus S Euro Cylinder & Turn 85MM MK - Differ Keys Not Included 41.13 45.66 55.58 Each
MSEK3530T Primus S Euro Cylinder & Turn 65MM MK - Differ Keys Not Included 37.11 43.70 51.57 Each
MSEK3535T Primus S Euro Cylinder & Turn 70MM MK - Differ Keys Not Included 23.35 27.89 37.80 Each
MSEK3540T Primus S Euro Cylinder & Turn 75MM MK - Differ Keys Not Included 37.11 43.70 51.57 Each
MSEK3545T Primus S Euro Cylinder & Turn 80MM MK - Differ Keys Not Included 37.11 43.70 51.57 Each
MSEK3550T Primus S Euro Cylinder & Turn 85MM MK - Differ Keys Not Included 41.13 45.66 55.58 Each
MSEK3555T Primus S Euro Cylinder & Turn 90MM MK - Differ Keys Not Included 41.13 45.66 55.58 Each
MSEK4030T Primus S Euro Cylinder & Turn 70MM MK - Differ Keys Not Included 37.11 43.70 51.57 Each
MSEK4035T Primus S Euro Cylinder & Turn 75MM MK - Differ Keys Not Included 37.11 43.70 51.57 Each
MSEK4040T Primus S Euro Cylinder & Turn 80MM MK - Differ Keys Not Included 24.74 29.49 39.20 Each
MSEK4045T Primus S Euro Cylinder & Turn 85MM MK - Differ Keys Not Included 41.13 45.66 55.58 Each
MSEK4050T Primus S Euro Cylinder & Turn 90MM MK - Differ Keys Not Included 41.13 45.66 55.58 Each
MSEK4055T Primus S Euro Cylinder & Turn 95MM MK - Differ Keys Not Included 41.13 45.66 55.58 Each
MSEK4530T Primus S Euro Cylinder & Turn 75MM MK - Differ Keys Not Included 37.11 43.70 51.57 Each
MSEK4535T Primus S Euro Cylinder & Turn 80MM MK - Differ Keys Not Included 37.11 43.70 51.57 Each
MSEK4540T Primus S Euro Cylinder & Turn 85MM MK - Differ Keys Not Included 41.13 45.66 55.58 Each
MSEK4545T Primus S Euro Cylinder & Turn 90MM MK - Differ Keys Not Included 41.13 45.66 55.58 Each
MSEK4555T Primus S Euro Cylinder & Turn 100MM MK - Differ Keys Not Included 41.13 45.66 55.58 Each
MSEK5030T Primus S Euro Cylinder & Turn 80MM MK - Differ Keys Not Included 37.11 43.70 51.57 Each
MSEK5035T Primus S Euro Cylinder & Turn 85MM MK - Differ Keys Not Included 41.13 45.66 55.58 Each
MSEK5040T Primus S Euro Cylinder & Turn 90MM MK - Differ Keys Not Included 41.13 45.66 55.58 Each
MSEK5050T Primus S Euro Cylinder & Turn 100MM MK - Differ Keys Not Included 41.13 45.66 55.58 Each
MSEK5055T Primus S Euro Cylinder & Turn 105mm MK - Differ Keys Not Included 41.13 45.66 55.58 Each
MSEK5530T Primus S Euro Cylinder & Turn 85mm MK - Differ Keys Not Included 41.13 45.66 55.36 Each
MSEK5535T Primus S Euro Cylinder & Turn 90mm MK - Differ Keys Not Included 41.13 45.66 55.58 Each
MSEK5540T Primus S Euro Cylinder & Turn 95mm MK - Differ Keys Not Included 41.13 45.66 55.58 Each
3.1
CISA Master Key Systems - Primus S Euro Range (Unrestricted)
Euro Cylinder With Turn SNP PB PC Misc Unit
MSEK5545T Primus S Euro Cylinder & Turn 100mm MK - Differ Keys Not Included 41.13 45.66 55.58 Each
MSEK5550T Primus S Euro Cylinder & Turn 105mm MK - Differ Keys Not Included 41.13 45.66 55.58 Each
MSEK5555T Primus S Euro Cylinder & Turn 110mm MK - Differ Keys Not Included 41.13 45.66 55.58 Each
3.2
CISA Master Key Systems - Primus S Euro Range (Unrestricted)
Euro Single Cylinder SNP PB PC Misc Unit
MSES40 Primus S Euro Single 40MM MK - Differ Keys Not Included 15.80 19.18 27.10 Each
MSES45 Primus S Euro Single 45MM MK - Differ Keys Not Included 15.80 19.18 27.10 Each
MSES50 Primus S Euro Single 50MM MK - Differ Keys Not Included 28.85 34.22 40.14 Each
MSES55 Primus S Euro Single 55MM MK - Differ Keys Not Included 28.85 34.22 40.14 Each
MSES75 Primus S Euro Single 75MM MK - Differ Keys Not Included 28.85 34.22 40.14 Each
3.3
CISA Master Key Systems - Primus S Other Cylinders, Keys & Service
Other Cylinders SNP PB PC Misc Unit
MSCL1 Primus S Camlock MK - Differ Keys Not Included 26.67 31.04 37.39 Each
MSPL650EUX Primus S Padlock - Open Shackle MK - Differ Keys Not Included 56.27 Each
MSPL650P Primus S Padlock - Close Shackle MK - Differ Keys Not Included 98.85 Each
MSPL652 Primus S Padlock - Open Shackle MK - Differ Keys Not Included 58.66 Each
MSPL653 Primus S Padlock - Open Shackle MK - Differ Keys Not Included 61.06 Each
MSPL730EUX Primus S Padlock - Open Shackle MK - Differ Keys Not Included 89.35 Each
MSPL732EUX Primus S Padlock - Open Shackle MK - Differ Keys Not Included 87.92 Each
MSPL733EUX Primus S Padlock - Open Shackle MK - Differ Keys Not Included 90.42 Each
MSPL860EUX Primus S Padlock - Open Shackle S.STEEL MK - Differ Keys Not Included 118.41 Each
MSPL860PEUX Primus S Padlock - Close Shackle S.STEEL MK - Differ Keys Not Included 161.00 Each
MSRC Primus S Rim Cylinder MK - Differ Keys Not Included 12.62 15.59 24.15 Each
MSRMC Primus S Rim Mortice MK - Differ Keys Not Included 16.84 20.44 27.78 Each
MSSKD Primus S Scandinavian Double MK - Differ Keys Not Included 51.27 56.92 72.74 Each
MSSKE Primus S Scandinavian External MK - Differ Keys Not Included 23.24 26.69 34.01 Each
MSSKI Primus S Scandinavian Internal MK - Differ Keys Not Included 23.24 26.11 34.01 Each
CISA Master Key Systems - Primus S Other Cylinders, Keys & Service
Keys SNP PB PC Misc Unit
MSKEYS Primus S Differ Keys When Supplied With Cylinder 3.45 Each
MSMASTER KEYS Primus S Master Keys 12.94 Each
SKEYS LATER Primus S Differ Keys Cut and Supplied Later 12.94 Each
CISA Master Key Systems - Primus S Other Cylinders, Keys & Service
Service SNP PB PC Misc Unit
Barricade (6) Anti Barricade Function* 7.12 Each
Classroom (7) Classroom Function* 8.41 Each
Construction Key Construction Keying Function (Price Per Cylinder Side)* 5.56 Each
PR-TURND1 Addition For Large Vertical DDA Turn 12.76 13.80 16.77 Each
PR-TURND2 Addition For Large Horizontal DDA Turn 12.76 13.80 15.31 Each
Stamping Charge Special Stamping Requests (Price Per Cylinder) 1.38 Each
Std Primus Standard Differ Deduct 2.38 Each
*Additional cost to Cylinder
3.4
CISA Master Key Systems - Primus S Turn Only Cylinders
Service SNP PB PC Misc Unit
EKK3030T Primus S Euro Turn & Turn 60MM 33.31 36.28 40.44 Each
EKK3535T Primus S Euro Turn & Turn 70MM 33.31 36.28 40.44 Each
ESK40T Primus S Euro Single 40MM Turn Only 20.66 22.00 27.19 Each
ESK45T Primus S Euro Single 45MM Turn Only 20.66 22.00 27.19 Each
OKK3030T Primus S Oval Turn & Turn 60MM 33.31 36.28 40.44 Each
OKK3535T Primus S Oval Turn & Turn 70MM 33.31 36.28 40.44 Each
OSK40T Primus S Oval Single 40MM Turn Only 20.66 22.00 27.19 Each
OSK45T Primus S Oval Single 45MM Turn Only 20.66 22.00 27.19 Each
3.5
CISA Master Key Systems - 7500 Euro Range (Patented)
Euro Cylinder With Turn SNP PB PC Misc Unit
7530.ME4540T 7500 Euro Cylinder & Turn 85mm MK - Differ Keys Not Included 39.33 44.08 53.59 Each
7530.ME4545T 7500 Euro Cylinder & Turn 90mm MK - Differ Keys Not Included 39.33 44.08 53.59 Each
7530.ME4555T 7500 Euro Cylinder & Turn 100mm MK - Differ Keys Not Included 39.33 44.08 53.59 Each
7530.ME5030T 7500 Euro Cylinder & Turn 80mm MK - Differ Keys Not Included 35.35 40.10 49.61 Each
7530.ME5035T 7500 Euro Cylinder & Turn 85mm MK - Differ Keys Not Included 39.33 44.08 53.59 Each
7530.ME5040T 7500 Euro Cylinder & Turn 90mm MK - Differ Keys Not Included 39.33 44.08 53.59 Each
7530.ME5050T 7500 Euro Cylinder & Turn 100mm MK - Differ Keys Not Included 39.33 44.08 53.59 Each
7530.ME5055T 7500 Euro Cylinder & Turn 105mm MK - Differ Keys Not Included 39.33 44.08 53.59 Each
7530.ME5530T 7500 Euro Cylinder & Turn 85mm MK - Differ Keys Not Included 39.33 44.08 53.59 Each
7530.ME5535T 7500 Euro Cylinder & Turn 90mm MK - Differ Keys Not Included 39.33 44.08 53.59 Each
7530.ME5540T 7500 Euro Cylinder & Turn 95mm MK - Differ Keys Not Included 39.33 44.08 53.59 Each
7530.ME5545T 7500 Euro Cylinder & Turn 100mm MK - Differ Keys Not Included 39.33 44.08 53.59 Each
7530.ME5550T 7500 Euro Cylinder & Turn 105mm MK - Differ Keys Not Included 39.33 44.08 53.59 Each
7530.ME5555T 7500 Euro Cylinder & Turn 110mm MK - Differ Keys Not Included 39.33 44.08 53.59 Each
3.6
CISA Master Key Systems - 7500 Euro Range (Patented)
Euro Double Cylinder SNP PB PC Misc Unit
7520.ME4055 7500 Euro Double Cylinder 95mm MK - Differ Keys Not Included 46.11 50.27 58.59 Each
7520.ME4545 7500 Euro Double Cylinder 90mm MK - Differ Keys Not Included 46.11 50.27 58.59 Each
7520.ME4555 7500 Euro Double Cylinder 100mm MK - Differ Keys Not Included 48.49 52.65 60.97 Each
7520.ME5050 7500 Euro Double Cylinder 100mm MK - Differ Keys Not Included 48.49 52.65 60.97 Each
3.7
CISA Master Key Systems - 7500 Oval Range (Patented)
Oval Single Cylinder SNP PB PC Misc Unit
7510.MO40 7500 Oval Single Cylinder 40mm MK - Differ Keys Not Included 22.35 25.79 31.86 Each
7510.MO45 7500 Oval Single Cylinder 45mm MK - Differ Keys Not Included 22.35 25.79 31.86 Each
CISA Master Key Systems - 7500 Other Cylinders, Keys & Service
Other Cylinders SNP PB PC Misc Unit
7540.MR 7500 Rim Cylinder MK - Differ Keys Not Included 24.18 27.71 33.89 Each
7550.MM 7500 Threaded Mortice Cylinder MK - Differ Keys Not Included 28.18 31.71 37.08 Each
7560.MC 7500 Cam Lock Cylinder MK - Differ Keys Not Included 36.21 38.86 44.92 Each
7570.MSE 7500 Scandinavian External Cylinder MK - Differ Keys Not Included 29.65 32.44 39.38 Each
7570.MSI 7500 Scandinavian Internal Cylinder MK - Differ Keys Not Included 29.00 32.44 39.38 Each
CISA Master Key Systems - 7500 Other Cylinders, Keys & Service
Service SNP PB PC Misc Unit
7000.002 7500 Security Escutcheon 27.33 29.71 29.71 Each
Baricade (6) 7500 Anti Barricade Function* 7.12 Each
Classroom (7) 7500 Classroom Function* 8.41 Each
Construction Key 7500 Construction Keying Function (Price Per Cylinder Side)* 5.56 Each
PR-TURND1 7500 Addition For Large Vertical DDA Turn 12.76 13.80 16.77 Each
PR-TURND2 7500 Addition For Large Horizontal DDA Turn 12.76 13.80 15.31 Each
Stamping Charge 7500 CISA Special Stamping Requests (Price Per Cylinder) 1.38 Each
Std Differ Briton 7500 Special Stamping Requests (Price Per Cylinder) 2.16 Each
*Additional to price of cylinder
CISA Master Key Systems - 7500 Other Cylinders, Keys & Service
Keys SNP PB PC Misc Unit
7500.D 7500 Additional Keys Supplied with Cylinder 4.21 Each
7500.KEY 7500 Differ Keys Later 13.37 Each
7500.M 7500 Master Keys 13.37 Each
3.8
CISA Master Key Systems - Astral Euro Range
Euro Double Cylinder PB SB NP Misc Unit
M.0A310.07 Astral Euro Double 30/30 (59mm Overall) - Differ Keys Not Included 25.22 25.22 Each
M.0A310.12 Astral Euro Double 30/40 (69mm Overall) - Differ Keys Not Included 26.34 26.34 Each
M.0A310.13 Astral Euro Double 35/35 (69mm Overall) - Differ Keys Not Included 25.22 25.22 Each
M.0A310.17 Astral Euro Double 30/50 (79mm Overall) - Differ Keys Not Included 27.45 27.45 Each
M.0A310.18 Astral Euro Double 40/40 (79mm Overall) - Differ Keys Not Included 27.45 27.45 Each
M.0A310.19 Astral Euro Double 35/45 (79mm Overall) - Differ Keys Not Included 27.45 27.45 Each
M.0A310.20 Astral Euro Double 30/60 (89mm Overall) - Differ Keys Not Included 29.68 29.68 Each
M.0A310.21 Astral Euro Double 40/50 (89mm Overall) - Differ Keys Not Included 29.68 29.68 Each
M.0A310.23 Astral Euro Double 50/50 (99mm Overall) - Differ Keys Not Included 31.90 31.90 Each
M.0A310.25 Astral Euro Double 40/60 (99mm Overall) - Differ Keys Not Included 31.90 31.90 Each
M.0A310.28 Astral Euro Double 35/40 (74mm Overall) - Differ Keys Not Included 27.22 27.22 Each
M.0A310.29 Astral Euro Double 45/45 (89mm Overall) - Differ Keys Not Included 29.68 29.68 Each
M.0A310.30 Astral Euro Double 40/45 (84mm Overall) - Differ Keys Not Included 28.56 28.56 Each
M.0A310.31 Astral Euro Double 35/50 (84mm Overall) - Differ Keys Not Included 28.56 28.56 Each
M.0A310.32 Astral Euro Double 35/55 (89mm Overall) - Differ Keys Not Included 29.68 29.68 Each
M.0A310.42 Astral Euro Double 40/55 (94mm Overall) - Differ Keys Not Included 30.29 30.29 Each
M.0A310.43 Astral Euro Double 45/55 (99mm Overall) - Differ Keys Not Included 31.90 31.90 Each
4.1
CISA Master Key Systems - Astral Euro Range
Euro Single Cylinder PB SB NP Misc Unit
M.0A314.02 Astral Euro Single 30/10 (39.5mm Overall) - Differ Keys Not Included 12.75 12.75 Each
M.0A314.03 Astral Euro Single 40/10 (49.5mm Overall) - Differ Keys Not Included 13.29 13.29 Each
M.0A314.07 Astral Euro Single 35/10 (44.5mm Overall) - Differ Keys Not Included 12.75 12.75 Each
4.2
CISA Master Key Systems - Astral Rim & Mortice Range
Mortice Rim PB SB NP Misc Unit
M.0A810.00 Astral Single Screw In (Threaded) Cylinders - Differ Keys Not Included 17.92 17.92 Each
4.3
CISA Master Key Systems - Astral S Euro Range
Euro Cylinder with Turn PB SB NP Misc Unit
M.0A3S2.07 Astral S Euro Cylinder & Turn 30/30 (59mm Overall) - Differ Keys Not Included 29.23 29.23 Each
M.0A3S2.13 Astral S Euro Cylinder & Turn 35/35 (69mm Overall) - Differ Keys Not Included 29.23 29.23 Each
M.0A3S2.18 Astral S Euro Cylinder & Turn 40/40 (79mm Overall) - Differ Keys Not Included 32.12 32.12 Each
M.0A3S2.19 Astral S Euro Cylinder & Turn 35/45 (79mm Overall) - Differ Keys Not Included 32.12 32.12 Each
M.0A3S2.21 Astral S Euro Cylinder & Turn 40/50 (89mm Overall) - Differ Keys Not Included 35.01 35.01 Each
M.0A3S2.23 Astral S Euro Cylinder & Turn 50/50 (99mm Overall) - Differ Keys Not Included 37.81 37.81 Each
M.0A3S2.29 Astral S Euro Cylinder & Turn 45/45 (89mm Overall) - Differ Keys Not Included 35.01 35.01 Each
M.0A3S2.42 Astral S Euro Cylinder & Turn 40/55 (94mm Overall) - Differ Keys Not Included 36.42 36.42 Each
M.0A3S2.43 Astral S Euro Cylinder & Turn 45/55 (99mm Overall) - Differ Keys Not Included 37.81 37.81 Each
M.0A3S2.84 Astral S Euro Cylinder & Turn 45/40 (84mm Overall) - Differ Keys Not Included 33.56 33.56 Each
M.0A3S2.85 Astral S Euro Cylinder & Turn 45/35 (79mm Overall) - Differ Keys Not Included 32.12 32.12 Each
4.4
This section includes:
• Hardened Steel CISA offer a full range of padlocks comprising of Hardened
Steel, Quality Brass and Contract Padlocks providing
• Quality Brass strength, reliability and performance.
• Contract
• Shutter Locks
Contents - Padlocks Finishes - Padlocks
Guide to finish codes available under each of the main headings in the Cylinders section of this price list.
Please refer to technical product brochures for details of base materials and finish applications.
5.1
CISA Hardened Steel Padlocks
Slide Bolt Shackle-Steel Body NP NP/PB Misc Unit
28552.85.0 DIFFER Slide Bolt Shackle (14mm thick) - Steel Body (84mm) - 36mm BG / 17.5mm SC* - 2 Keyed 97.94 Each
*BG - Bolt Gap / SC - Shackle Clearance
5.2
CISA Quality Brass Padlocks
Standard Shackle - Brass Body NP NP/PB Misc Unit
22010.30.0 DIFFER Standard Shackle (5.0mm thick) - Brass Body (30mm) - 17.0mm shackle clearance - 2 Keyed 9.98 Each
22010.30.0 KA Standard Shackle (5.0mm thick) - Brass Body (30mm) - 17.0mm shackle clearance - 2 Keyed 9.98 Each
22010.40.0 DIFFER Standard Shackle (6.0mm thick) - Brass Body (40mm) - 23.0mm shackle clearance - 2 Keyed 11.15 Each
22010.40.0 K/A Standard Shackle (6.0mm thick) - Brass Body (40mm) - 23.0mm shackle clearance - 2 Keyed 11.15 Each
22010.50.0 DIFFER Standard Shackle (8.0mm thick) - Brass Body (50mm) - 27.5mm shackle clearance - 2 Keyed 12.80 Each
22010.50.0 K/A Standard Shackle (8.0mm thick) - Brass Body (50mm) - 27.5mm shackle clearance - 2 Keyed 14.02 Each
22010.60 0 DIFFER Standard Shackle (10.0mm thick) - Brass Body (60mm) - 37.5mm shackle clearance - 2 Keyed 16.03 Each
22010.60.0 K/A Standard Shackle (10.0mm thick) - Brass Body (60mm) - 37.5mm shackle clearance - 2 Keyed 16.03 Each
5.3
CISA Contract Padlocks
Marine Quality Padlocks NP NP/PB Misc Unit
21710.30.0 DIFFER CISA 'Logo' Line - 29mm body - 4.75mm thick shackle - 13.8mm shackle clearance - 2 Keyed 10.51 Each
21710.40.0 DIFFER CISA 'Logo' Line - 40mm body - 6.35mm thick shackle - 22.5mm shackle clearance - 2 Keyed 13.55 Each
21710.50.0 DIFFER CISA 'Logo' Line - 50mm body - 7.14mm thick shackle - 26.0mm shackle clearance - 2 Keyed 19.64 Each
21710.60.0 DIFFER CISA 'Logo' Line - 60mm body - 7.94mm thick shackle - 32.2mm shackle clearance - 2 Keyed 22.68 Each
5.4
CISA Shutter Locks
Accessories NP NP/PB Misc Unit
06302.60 Hasp for Rolling Shutter Doors 43.45 Each
5.5
This section includes:
• Electronic Locks
• ElettriKa
Electronic Locks
Electric Rim Locks for Steel Doors and Gates 12V Fail Safe Misc Unit
07120.00.1 Coil Set for above series. 12V ac.(1=right hand) 15.55 Each
07120.00.2 Coil Set for above series. 12V ac.(2=left hand) 15.55 Each
11721.60.1 Lock with protective back plate and spacer. RH inward opening. 60mm b/set 86.15 Each
11721.60.2 Lock with protective back plate and spacer. LH inward opening. 60mm b/set 86.15 Each
11731.60.1 Lock, protective back plate, spacer, push button, Hold open. RH inward opening. 60mm b/set 87.98 Each
11731.60.2 Lock, protective back plate, spacer, push button, Hold open. LH inward opening. 60mm b/set 87.98 Each
11761.60.1 Lock, manual throw dead bolt, protective back plate, spacer. RH inward opening. 60mm b/set 92.74 Each
11771.60.1 Lock, manual throw dead bolt, protective back plate, spacer.push button. RH inward opening. 60mm b/set 75.83 Each
11823.80.1 Lock, for up and over doors, protective back plate. RH opening. 80mm b/set 84.78 Each
11823.80.2 Lock, for up and over doors, protective back plate. LH opening. 80mm b/set 84.78 Each
11921.50.1 Lock with Striker. RH inward opening. 50mm b/set 73.96 Each
11921.60.1 Lock with Striker. RH inward opening. 60mm b/set 73.96 Each
11921.60.2 Lock with Striker. LH inward opening. 60mm b/set 73.96 Each
11921.60.3 Lock with Striker. RH outward opening. 60mm b/set 82.36 Each
11921.60.4 Lock with Striker. LH outward opening. 60mm b/set 82.36 Each
11931.60.1 Lock for Outward Opening, push button, hold open device. RH inward opening. 60mm b/set 79.30 Each
11931.60.2 Lock for Outward Opening. push button, hold open device. LH inward opening. 60mm b/set 79.30 Each
11931.60.3 Lock for Outward Opening. push button, hold open device. RH outward opening. 60mm b/set 86.91 Each
11931.60.4 Lock for Outward Opening. push button, hold open device. LH outward opening. 60mm b/set 86.91 Each
6.1
Electronic Locks
Electric Rim Locks for Wooden Doors 12V ac Fail Safe Misc Unit
11540.40.2 Lock with inside push button LH inward opening. 40mm b/set 78.04 Each
11560.40.1 Lock with inside push button and cylinder. Hold open device. RH Inward opening. 40mm b/set 87.19 Each
11610.60.1 Lock with inside push button. RH inward opening. 60mm b/set 73.97 Each
11610.60.2 Lock with inside push button. LH inward opening. 60mm b/set 73.97 Each
11610.60.3 Lock with inside push button. RH outward opening. 60mm b/set 82.34 Each
11610.60.4 Lock with inside push button. LH outward opening. 60mm b/set 82.34 Each
11630.60.1 Lock with inside push button and cylinder. Hold open. RH inward opening. 60mm b/set 82.34 Each
11630.60.2 Lock with inside push button and cylinder. Hold open. LH inward opening. 60mm b/set 82.34 Each
11630.60.3 Lock with inside push button and cylinder. Hold open. RH outward opening. 60mm b/set 95.72 Each
11630.60.4 Lock with inside push button and cylinder. Hold open. LH outward opening. 60mm b/set 95.72 Each
Electronic Locks
Accessories Misc Unit
07017.10.1 Grey Lacquered Striker with roller (RH inward opening) for lock series 11610, 11630 9.45 Each
07017.10.2 Grey Lacquered Striker with roller (LH inward opening) for lock series 11610, 11630 9.45 Each
07017.10.3 Grey Lacquered Striker with roller (RH outward opening) for lock series 11610 9.45 Each
07017.10.4 Grey Lacquered Striker with roller (LH outward opening) for lock series 11610 9.45 Each
07018.10.3 Striker Set with Slide, anchor plate and screws (RH outward opening) for Lock series 11610 13.38 Each
07018.10.4 Striker Set with Slide, anchor plate and screws (LH outward opening) for Lock series 11610 13.38 Each
ElettriKa
ElettriKa for Timber Doors Misc Unit
1A610.00.0 12V Lock, inner push button. Non Handed 95.08 Each
1A611.00.0 12V Lock, inner push button. Brass Escutcheon. Non Handed 96.75 Each
1A630.00.0 12V Lock, inner push button. Hold Open Device. Non Handed 103.31 Each
1A631.00.0 12V Lock, inner push buton.Hold Open Device. Brass Escutcheon Non Handed 105.00 Each
6.2
ElettriKa
ElettriKa for Steel Doors Misc Unit
1A721.00.0 12V Lock, back plate for lock & striker to be welded. Non Handed 103.48 Each
1A731.00.0 12V Lock, back plate for lock/striker to be welded. Push button. Hold Open Non Handed 105.72 Each
ElettriKa
Accessories Misc Unit
01070.10.1 Keys 7.55 Each
07021.00.0 Striker for A721 and A731 5.83 Each
07021.05.0 Backplate for lock and striker to be welded. For Lock A721 and A723 7.93 Each
07022.00.0 Booster. To adapt 12V dc-24V dc - 24Vca. To reduce power absorption. To operate hold open. Boost low power supply 39.20 Each
07120.00.0 Coil Set 12V ac CE for locks A610, A611, A630, A631, A721, A731 15.55 Each
KA.EL.600 Keyed Alike Charge 3.24 Each
KA.STD.SGL.EL Keyed Alike Charge 3.24 Each
PSTL12 Elettrika Power Supply Unit 12Vac 3Amp 71.50 Each
6.3
This section includes:
• Heavy Duty Modular
7.1
CISA Heavy Duty Modular Lockcases
Deadlock - Square Forend PB SS Unit
52780.60.0 Square forend and striker 60mm backset 37.19 37.19 Each
52780.70.0 Square forend and striker 70mm backset 37.19 37.19 Each
52780.80.0 Square forend and striker 80mm backset 37.19 37.19 Each
7.2
Index
Part Number Page Part Number Page Part Number Page Part Number Page Part Number Page Part Number Page
01070.10.1 6.3 09010.10 1.2 0A312.84 1.4 0A3S2.85 1.6 0G302.18 1.1 0H3S2.19 1.7
02649.01 5.2 09010.15 1.2 0A312.85 1.4 0A510.50 1.5 0G302.19 1.1 0H3S2.21 1.7
02900.00 1.2 09010.80 1.2 0A314.02 1.4 0A610.00 5.2 0G302.21 1.1 0H3S2.42 1.7
06300.14 5.4 09023.10 1.2 0A314.03 1.4 0A710.10 1.4 0G302.42 1.1 0H3S2.43 1.7
06300.18 5.4 09023.15 1.2 0A314.07 1.4 0A710.15 1.4 0G302.43 1.1 0H3S2.84 1.7
06301.50 5.4 09023.80 1.2 0A3S1.07 1.5 0A710.80 1.4 0G302.84 1.1 0H3S2.85 1.7
06301.60 5.4 09026.02 1.3 0A3S1.12 1.5 0A713.10 1.4 0G302.85 1.1 11540.40.2 6.2
06302.25 5.4 09026.03 1.3 0A3S1.13 1.5 0A713.15 1.4 0G304.02 1.2 11560.40.1 6.2
06302.60 5.5 09026.07 1.3 0A3S1.17 1.5 0A713.80 1.4 0G304.03 1.2 11610.60.1 6.2
07009.00.0 6.1 0A310.07 1.3 0A3S1.18 1.5 0A714.02 1.4 0G304.07 1.2 11610.60.2 6.2
07017.10.1 6.2 0A310.12 1.3 0A3S1.19 1.5 0A714.03 1.4 0G500.50 1.2 11610.60.3 6.2
07017.10.2 6.2 0A310.13 1.3 0A3S1.20 1.5 0A714.07 1.4 0H314.02 1.7 11610.60.4 6.2
07017.10.3 6.2 0A310.17 1.3 0A3S1.21 1.5 0A810.00 1.5 0H314.03 1.7 11630.60.1 6.2
07017.10.4 6.2 0A310.18 1.3 0A3S1.23 1.5 0G300.07 1.1 0H314.07 1.7 11630.60.2 6.2
07018.10.3 6.2 0A310.19 1.3 0A3S1.25 1.5 0G300.12 1.1 0H3S0.07 1.6 11630.60.3 6.2
07018.10.4 6.2 0A310.20 1.3 0A3S1.28 1.5 0G300.13 1.1 0H3S0.12 1.6 11630.60.4 6.2
07021.00.0 6.3 0A310.21 1.3 0A3S1.29 1.5 0G300.17 1.1 0H3S0.13 1.6 11721.60.1 6.1
07021.05.0 6.3 0A310.23 1.3 0A3S1.30 1.6 0G300.18 1.1 0H3S0.17 1.6 11721.60.2 6.1
07022.00.0 6.3 0A310.25 1.3 0A3S1.31 1.6 0G300.19 1.1 0H3S0.18 1.6 11731.60.1 6.1
07120.00.0 6.3 0A310.28 1.3 0A3S1.32 1.6 0G300.20 1.1 0H3S0.19 1.6 11731.60.2 6.1
07120.00.1 6.1 0A310.29 1.3 0A3S1.39 1.6 0G300.21 1.1 0H3S0.20 1.6 11761.60.1 6.1
07120.00.2 6.1 0A310.30 1.3 0A3S1.42 1.6 0G300.23 1.1 0H3S0.21 1.6 11771.60.1 6.1
07586.04 5.2 0A310.31 1.3 0A3S1.43 1.6 0G300.25 1.1 0H3S0.23 1.7 11823.80.1 6.1
07586.05 5.2 0A310.32 1.3 0A3S2.07 1.6 0G300.28 1.1 0H3S0.25 1.7 11823.80.2 6.1
07586.08 5.2 0A310.42 1.3 0A3S2.13 1.6 0G300.29 1.1 0H3S0.28 1.7 11921.50.1 6.1
07586.09 5.2 0A310.43 1.3 0A3S2.18 1.6 0G300.30 1.1 0H3S0.29 1.7 11921.60.1 6.1
08210.02.0 1.8 0A312.07 1.3 0A3S2.19 1.6 0G300.31 1.1 0H3S0.30 1.7 11921.60.2 6.1
08210.05.0 1.8 0A312.13 1.3 0A3S2.21 1.6 0G300.32 1.1 0H3S0.31 1.7 11921.60.3 6.1
08210.13.0 1.8 0A312.18 1.3 0A3S2.23 1.6 0G300.42 1.1 0H3S0.32 1.7 11921.60.4 6.1
08210.18.0 1.8 0A312.19 1.3 0A3S2.29 1.6 0G300.43 1.1 0H3S0.43 1.7 11931.60.1 6.1
08220.02.0 1.8 0A312.21 1.3 0A3S2.42 1.6 0G300.54 1.1 0H3S2.07 1.7 11931.60.2 6.1
08230.02.0 1.8 0A312.42 1.4 0A3S2.43 1.6 0G302.07 1.1 0H3S2.13 1.7 11931.60.3 6.1
08230.06.0 1.8 0A312.43 1.4 0A3S2.84 1.6 0G302.13 1.1 0H3S2.18 1.7 11931.60.4 6.1
1
Part Number Page Part Number Page Part Number Page Part Number Page Part Number Page Part Number Page
12010.50.0 6.1 28050.56.0 DIFFER 5.1 52710.80.0 7.1 7510.ME45 3.7 7530.ME3530T 3.5 7560.MC 3.8
12011.60.0 6.1 28050.57.0 DIFFER 5.1 52730.60.0 7.1 7510.ME50 3.7 7530.ME3535T 3.5 7570.MSE 3.8
1A610.00.0 6.2 28050.70.0 DIFFER 5.1 52730.70.0 7.1 7510.ME55 3.7 7530.ME3540T 3.5 7570.MSI 3.8
1A611.00.0 6.2 28050.71.0 DIFFER 5.1 52730.80.0 7.1 7510.ME75 3.7 7530.ME3545T 3.5 Baricade (6) 3.8
1A630.00.0 6.2 28050.72.0 DIFFER 5.1 52750.60.0 7.1 7510.MO40 3.8 7530.ME3550T 3.5 Barricade (6) 2.2, 3.4
1A631.00.0 6.2 28052.55.0 DIFFER 5.1 52750.70.0 7.1 7510.MO45 3.8 7530.ME3555T 3.5 CI PASS 1.2
1A721.00.0 6.3 28052.56.0 DIFFER 5.1 52750.80.0 7.1 7520.ME3030 3.6 7530.ME4030T 3.5 CI PASS AP3 1.7
1A731.00.0 6.3 28052.57.0 DIFFER 5.1 52755.60.0 7.1 7520.ME3035 3.6 7530.ME4035T 3.5 CI PASS ASTRAL 1.5
21610.50.0 DIFFER 5.4 28052.70.0 DIFFER 5.1 52755.70.0 7.1 7520.ME3040 3.6 7530.ME4040T 3.5 Classroom (7) 2.2, 3.4, 3.8
21610.63.0 DIFFER 5.4 28052.71.0 DIFFER 5.1 52755.80.0 7.1 7520.ME3045 3.6 7530.ME4045T 3.5 Construction Key 2.2, 3.4, 3.8
21610.70.0 DIFFER 5.4 28052.72.0 DIFFER 5.1 52760.60.0 7.1 7520.ME3050 3.6 7530.ME4050T 3.5 CYL-REPAIR 4.4
21610.90.0 DIFFER 5.4 28350.62.0 DIFFER 5.1 52760.70.0 7.1 7520.ME3055 3.6 7530.ME4055T 3.5 EKK3030T 3.5
21710.30.0 DIFFER 5.4 28350.73.0 DIFFER 5.1 52760.80.0 7.1 7520.ME3535 3.6 7530.ME4530T 3.5 EKK3535T 3.5
21710.40.0 DIFFER 5.4 28352.62.0 DIFFER 5.1 52780.60.0 7.2 7520.ME3540 3.6 7530.ME4535T 3.5 ENG CHARGE 5.3, 5.2
21710.50.0 DIFFER 5.4 28352.73.0 DIFFER 5.1 52780.70.0 7.2 7520.ME3545 3.6 7530.ME4540T 3.6 ESK40T 3.5
21710.60.0 DIFFER 5.4 28550.66.0 DIFFER 5.1 52780.80.0 7.2 7520.ME3550 3.6 7530.ME4545T 3.6 ESK45T 3.5
21810.65.0 DIFFER 5.4 28550.67.0 DIFFER 5.1 52840.60.0 7.2 7520.ME3555 3.6 7530.ME4555T 3.6 KA.EL.600 6.3
21810.80.0 DIFFER 5.4 28550.75.0 DIFFER 5.1 52840.70.0 7.2 7520.ME4040 3.6 7530.ME5030T 3.6 KA.LIM.SGL 5.2
22010.30.0 DIFFER 5.3 28550.84.0 DIFFER 5.1 52840.80.0 7.2 7520.ME4045 3.6 7530.ME5035T 3.6 KA.SP.SGL 5.2
22010.30.0 KA 5.3 28550.85.0 DIFFER 5.1 52842.60.0 7.2 7520.ME4050 3.6 7530.ME5040T 3.6 KA.STD.SGL 5.3
22010.40.0 DIFFER 5.3 28552.66.0 DIFFER 5.1 52842.70.0 7.2 7520.ME4055 3.7 7530.ME5050T 3.6 KA.STD.SGL.EL 6.3
22010.40.0 K/A 5.3 28552.67.0 DIFFER 5.1 52842.80.0 7.2 7520.ME4545 3.7 7530.ME5055T 3.6 KEY.0A 4.4, 4.3
22010.50.0 DIFFER 5.3 28552.75.0 DIFFER 5.1 52844.60.0 7.2 7520.ME4555 3.7 7530.ME5530T 3.6 KEY.LIM.MK.L 5.2
22010.50.0 K/A 5.3 28552.84.0 DIFFER 5.1 52844.70.0 7.2 7520.ME5050 3.7 7530.ME5535T 3.6 KEY.LIM.MK.W 5.2
22010.60 0 DIFFER 5.3 28552.85.0 DIFFER 5.2 52844.80.0 7.2 7520.MO3030 3.7 7530.ME5540T 3.6 KEY.LIM.SER.L 5.2
22010.60.0 K/A 5.3 41510.78.0 5.4 52871.60.0 7.2 7520.MO3535 3.7 7530.ME5545T 3.6 KEY.LIM.SER.W 5.2
22011.30.0 DIFFER 5.3 41525.78.0 5.4 52871.70.0 7.2 7520.MO4040 3.7 7530.ME5550T 3.6 KEY.SP.MK.L 5.2
22011.30.0 K/A 5.3 41525.78.1 5.4 52871.80.0 7.2 7530.ME3030T 3.5 7530.ME5555T 3.6 KEY.SP.MK.W 5.2
22011.40.0 DIFFER 5.3 41525.78.2 5.4 7000.002 3.8 7530.ME3035T 3.5 7530.MO3030T 3.7 KEY.SP.SER.L 5.2
22011.40.0 K/A 5.3 41526.78.0 5.4 7500.D 3.8 7530.ME3040T 3.5 7530.MO3535T 3.7 KEY.SP.SER.W 5.2
22011.50.0 DIFFER 5.3 433021002 1.8, 4.4 7500.KEY 3.8 7530.ME3045T 3.5 7530.MO4040T 3.7 KEY.STD C01 2.2
22011.50.0 K/A 5.3 52710.60.0 7.1 7500.M 3.8 7530.ME3050T 3.5 7540.MR 3.8 KEY.STD.MK.L 5.3
28050.55.0 DIFFER 5.1 52710.70.0 7.1 7510.ME40 3.7 7530.ME3055T 3.5 7550.MM 3.8 KEY.STD.MK.W 5.3
2
Part Number Page Part Number Page Part Number Page Part Number Page Part Number Page Part Number Page
KEY.STD.SER.L 5.3 M.0A310.43 4.1 M.0A3S2.18 4.4 M.0G300.29 2.1 MSED3545 3.2 MSEK5030T 3.1
KEY.STD.SER.W 5.3 M.0A312.07 4.1 M.0A3S2.19 4.4 M.0G300.30 2.1 MSED3550 3.2 MSEK5035T 3.1
KEY0A.S01 1.5 M.0A312.13 4.1 M.0A3S2.21 4.4 M.0G300.31 2.1 MSED3555 3.2 MSEK5040T 3.1
KEYAP3.S01 1.7 M.0A312.18 4.1 M.0A3S2.23 4.4 M.0G300.32 2.1 MSED4040 3.2 MSEK5050T 3.1
KEYSTD C01 1.2 M.0A312.19 4.1 M.0A3S2.29 4.4 M.0G300.42 2.1 MSED4045 3.2 MSEK5055T 3.1
M.02900.00 2.2 M.0A312.21 4.1 M.0A3S2.42 4.4 M.0G300.43 2.1 MSED4050 3.2 MSEK5530T 3.1
M.09010.10.0 2.2 M.0A312.42 4.1 M.0A3S2.43 4.4 M.0G300.54 2.1 MSED4055 3.2 MSEK5535T 3.1
M.09010.15.0 2.2 M.0A312.43 4.1 M.0A3S2.84 4.4 M.0G302.07 2.1 MSED4545 3.2 MSEK5540T 3.1
M.09010.80.0 2.3 M.0A312.84 4.1 M.0A3S2.85 4.4 M.0G302.13 2.1 MSED4555 3.2 MSEK5545T 3.2
M.09023.10.0 2.3 M.0A312.85 4.1 M.0A510.50 4.2 M.0G302.18 2.1 MSED5050 3.2 MSEK5550T 3.2
M.09023.15.0 2.3 M.0A314.02 4.2 M.0A710.10 4.2 M.0G302.19 2.1 MSEK3030T 3.1 MSEK5555T 3.2
M.09023.80.0 2.3 M.0A314.03 4.2 M.0A710.15 4.2 M.0G302.21 2.1 MSEK3035T 3.1 MSES40 3.3
M.09026.02.0 2.3 M.0A314.07 4.2 M.0A710.80 4.2 M.0G302.42 2.1 MSEK3040T 3.1 MSES45 3.3
M.09026.03.0 2.3 M.0A3S1.07 4.3 M.0A713.10 4.2 M.0G302.43 2.1 MSEK3045T 3.1 MSES50 3.3
M.09026.07.0 2.3 M.0A3S1.12 4.3 M.0A713.15 4.2 M.0G302.84 2.1 MSEK3050T 3.1 MSES55 3.3
M.0A.D 1.5, 4.4, 4.3 M.0A3S1.13 4.3 M.0A713.80 4.2 M.0G302.85 2.1 MSEK3055T 3.1 MSES75 3.3
M.0A.M 4.4, 4.3 M.0A3S1.17 4.3 M.0A714.02 4.2 M.0G304.02 2.2 MSEK3530T 3.1 MSKEYS 3.4
M.0A310.07 4.1 M.0A3S1.18 4.3 M.0A714.03 4.2 M.0G304.03 2.2 MSEK3535T 3.1 MSMASTER KEYS 3.4
M.0A310.12 4.1 M.0A3S1.19 4.3 M.0A714.07 4.2 M.0G304.07 2.2 MSEK3540T 3.1 MSOD3030 3.3
M.0A310.13 4.1 M.0A3S1.20 4.3 M.0A810.00 4.3 M.0G500.50 2.2 MSEK3545T 3.1 MSOD3535 3.3
M.0A310.17 4.1 M.0A3S1.21 4.3 M.0G.D 1.2, 2.2 M.AP3.D 1.8 MSEK3550T 3.1 MSOD4040 3.3
M.0A310.18 4.1 M.0A3S1.23 4.3 M.0G.M 1.2, 2.2 MC.LIM.SGL 5.2 MSEK3555T 3.1 MSOK3030T 3.3
M.0A310.19 4.1 M.0A3S1.25 4.3 M.0G300.07 2.1 MC.SP.SGL 5.2 MSEK4030T 3.1 MSOK3535T 3.3
M.0A310.20 4.1 M.0A3S1.28 4.3 M.0G300.12 2.1 MC.STD.SGL 5.3 MSEK4035T 3.1 MSOK4040T 3.3
M.0A310.21 4.1 M.0A3S1.29 4.3 M.0G300.13 2.1 MSCL1 3.4 MSEK4040T 3.1 MSOS40 3.3
M.0A310.23 4.1 M.0A3S1.30 4.3 M.0G300.17 2.1 MSED3030 3.2 MSEK4045T 3.1 MSOS45 3.3
M.0A310.25 4.1 M.0A3S1.31 4.3 M.0G300.18 2.1 MSED3035 3.2 MSEK4050T 3.1 MSPL650EUX 3.4
M.0A310.28 4.1 M.0A3S1.32 4.3 M.0G300.19 2.1 MSED3040 3.2 MSEK4055T 3.1 MSPL650P 3.4
M.0A310.29 4.1 M.0A3S1.39 4.3 M.0G300.20 2.1 MSED3045 3.2 MSEK4530T 3.1 MSPL652 3.4
M.0A310.30 4.1 M.0A3S1.42 4.3 M.0G300.21 2.1 MSED3050 3.2 MSEK4535T 3.1 MSPL653 3.4
M.0A310.31 4.1 M.0A3S1.43 4.3 M.0G300.23 2.1 MSED3055 3.2 MSEK4540T 3.1 MSPL730EUX 3.4
M.0A310.32 4.1 M.0A3S2.07 4.4 M.0G300.25 2.1 MSED3535 3.2 MSEK4545T 3.1 MSPL732EUX 3.4
M.0A310.42 4.1 M.0A3S2.13 4.4 M.0G300.28 2.1 MSED3540 3.2 MSEK4555T 3.1 MSPL733EUX 3.4
3
Part Number Page
MSPL860EUX 3.4
MSPL860PEUX 3.4
MSRC 3.4
MSRMC 3.4
MSSKD 3.4
MSSKE 3.4
MSSKI 3.4
OKK3030T 3.5
OKK3535T 3.5
OSK40T 3.5
OSK45T 3.5
PR-TURND1 2.2, 3.4, 3.8
PR-TURND2 2.2, 3.4, 3.8
PSTL12 6.3
SKEYS LATER 3.4
Stamping Charge 3.4, 3.8
Std Differ Briton 3.8
Std Primus 2.2, 3.4
4
Terms & Conditions of Sale
1. GENERAL - The Terms and Conditions of sale outlined herein (hereinafter referred to as “the Contract”) shall apply to the sale by Ingersoll Rand 8. SET OFF’S - Neither the Purchaser nor any affiliated company or assignee shall have the right to claim compensation or to set off any claims
Security Technologies Limited (hereinafter referred to as “the Company”) to the person, firm or company to whom the Company’s offer is made (hereinafter against any amounts which become payable to the Company under this Contract or otherwise.
referred to as “the Purchaser”) of products, equipment and parts relating thereto (hereinafter referred to as “the Equipment”).
Unless otherwise agreed in writing by the Company it shall be understood that the company proceeding with any work shall be in accordance with the 9. PATENTS - The Company shall defend any action or proceedings brought against the Purchaser and shall pay any adverse judgement entered
terms and conditions outlined herein. THESE TERMS AND CONDITIONS SHALL PREVAIL OVER ANY TERMS PUT FORWARD BY THE PURCHASER, therein so far as such action or proceeding is based upon a claim that the use of the Equipment thereof manufactured by the Company and furnished
UNLESS THE COMPANY AGREED TO THEM EXPRESSLY IN WRITING. NO CONDUCT BY THE COMPANY SHALL BE DEEMED TO CONSTITUTE under this Contract constitutes infringement of any patent of a country where the Equipment is sold, or of a country where the Company is aware at the
ACCEPTANCE OF ANY TERMS PUT FORWARD BY THE PURCHASER. Unless otherwise agreed between the parties, the Terms of Payment are net cash date of the sale that the Equipment will be used, providing the Company is promptly notified in writing and given authority, information and assistance
within 30 days of invoice and prices charged will be those ruling at the date of despatch. for defence of same, and the Company shall, as its option, procure for the Purchaser the right to continue to use said Equipment or modify it so that it
The Company reserves the right to charge interest at 5% over the Base Rate, from time to time, of Barclays Bank Plc on all overdue accounts, such interest becomes non-infringing, or replace the same with non-infringing equipment, or remove said equipment and refund the purchase price. The foregoing shall
shall accrue on a day to day basis. not be construed to include any agreement by the Company to accept any liability whatsoever in respect of patents for inventions including more than the
If payment is agreed to be made by installments, in the event of default in payment of any one installment, all other sums payable under the Contract shall Equipment furnished hereunder, or in respect of patents for methods and processes to be carried out with the aid of said Equipment. The foregoing states
become due. If any clause of this Contract is held by any competent authority to be invalid or unenforceable in whole or in part, the other clauses of the the entire liability of the Company with regard to patent infringement which is limited by Condition 11 hereof.
Contract and the remainder of the clause in question shall not be affected thereby.
10. WARRANTY - Unless a longer warranty period is agreed in writing between the Company and the Purchaser, the Company warranty that the
2. TITLE Equipment manufactured by it and delivered hereunder, will be free of defects in materials and workmanship for a period of six (6) months from the date
of shipment. Should any failure to conform to this Warranty be reported in writing to the Company within said period, the Company shall at its option, cor-
a. Until one payment in full has been made of all sums due to the Company under the Contract (or in the case of the Company accepting any
rect such nonconformity, by suitable repair to such Equipment or by furnishing a replacement part Ex-works, provided the Purchaser has properly stored,
cheque, bill of exchange or promissory note, until the same has been honoured) the property in the Equipment supplied by the Company, even if affixed to
installed, maintained and operated such Equipment in accordance with good industrial practices and has complied with the specific recommendations of
other goods of the Purchaser or a third party, shall remain in the Company.
the Company. Accessories or equipment furnished by the Company, but manufactured by others shall carry whatever warranty the manufacturers have con-
b. The Purchaser shall be at liberty to sell the goods as principal in the ordinary course of business, however the proceeds of any such sale and the veyed to the Company and which can be passed on to the Purchaser. The Company shall not be liable for any repairs, replacements or adjustments to the
benefit of any such contract of sale shall be the property of the Company and held in trust for the Company absolutely, provided always that the Company Equipment or any costs of labour performed by the Purchaser or others without the Company’s prior written approval. The effects of corrosion, erosion and
may by written notice terminate the Purchaser’s power of sale at any time if it appears to the Company that the Purchaser may go or threatens to go normal wear and tear are specifically excluded from the Company’s Warranty.
into receivership or liquidation and at any time after the termination of the power of sale, the Company may repossess the Equipment. If necessary the
Performance warranties are limited to those specifically stated within the Company’s proposal. Unless responsibilities for meeting such performance war-
Company shall have the right to enter on to the Purchaser’s premises to recover the Equipment or any part of it.
ranties are limited to specific shop or field tests, the Company’s obligation shall be to correct in the manner and for the period of time provided above.
THE COMPANY EXCLUDES ALL OTHER CONDITIONS, WARRANTIES OR REPRESENTATIONS OF ALL KINDS EXPRESS OR IMPLIED, STATUTORY OR
3. RISK - Not withstanding that the property in the Equipment may not have passed to the Purchaser as provided in Condition 2 hereof, the risk OTHERWISE (EXCEPT THAT OF TITLE) INCLUDING ALL IMPLIED WARRANTIES AND CONDITIONS RELATING TO SATISFACTORY QUALITY AND FITNESS
in the Equipment shall pass to the Purchaser at the time of the first tender of delivery to the Purchaser, his agent or carrier. FOR A PARTICULAR PURPOSE. Corrections by the Company of non-conformities whether patent or latent, in the manner and for the period of time
provided above shall constitute fulfillment of all liabilities for the Company for such non-conformities, whether based on contract, warranty, negligence,
4. ASSIGNMENT - Neither party shall assign or transfer the Contract without the prior written consent of the other party. The Company shall indemnity, strict liability or otherwise with respect to or arising out of such Equipment.
however, be permitted to assign or transfer without the prior written consent of the Purchaser the Company’s right to receive all or any portion of the pay-
ment due from the Purchaser under the Contract. 11. LIMITATION OF LIABILITY - THE REMEDIES OF THE PURCHASER SET FORTH HEREIN ARE EXCLUSIVE AND THE TOTAL LIABILITY OF
THE COMPANY WITH RESPECT TO THIS CONTRACT OR THE EQUIPMENT AND SERVICES FURNISHED HEREUNDER, IN CONNECTION WITH THE
5. DELIVERY - Delivery dates shall be quoted by the Company. Such dates shall be interpreted as estimated and in no event shall such dates be PERFORMANCE OR BREACH THEREOF, OR FROM THE MANUFACTURE, SALE, DELIVERY, INSTALLATION, REPAIR OR TECHNICAL DIRECTION COVERED
construed as falling within the meaning of “time is of the essence”. BY OR FURNISHED UNDER THIS CONTRACT, WHETHER BASED ON CONTRACT, WARRANTY, TORT, NEGLIGENCE, INDEMNITY, STRICT LIABILITY OR
OTHERWISE, SHALL NOT EXCEED THE PURCHASE PRICE OF UNIT OF THE EQUIPMENT UPON WHICH SUCH LIABILITY IS BASED.
Without prejudice the Company shall not be liable for loss, damage, detention or delay due to war, riots, civil insurrection or acts of the common enemy,
fire, flood, strikes or other labour difficulties, including the Company’s own plants, acts or omissions of the Purchaser, embargo, transport shortage, dam- THE COMPANY AND ITS SUPPLIERS SHALL IN NO EVENT BE LIABLE TO THE PURCHASER, ANY SUCCESSORS IN INTEREST OR ANY BENEFICIARY
age or delay in transportation, inability to obtain necessary labour or materials from usual sources, faulty forgings or castings, or other causes whatsoever OR ASSIGNEE OF THIS CONTRACT FOR ANY CONSEQUENTIAL, INCIDENTAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES ARISING OUT OF THIS
beyond reasonable control of the Company. CONTRACT, OR ANY BREACH HEREOF, OR ANY DEFECT IN, OR FAILURE OF, OR MALFUNCTION OF THE EQUIPMENT SUPPLIED HEREUNDER,
WHETHER BASED UPON LOSS OF USE, LOST PROFITS, REVENUE OR INTEREST, LOST GOODWILL, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS,
In the event of delay in performance due to any such cause the date of delivery of time for completion will be adjusted to reflect the actual length of time LOSS BY REASON OF SHUTDOWN OR NON-OPERATION, INCREASED EXPENSES OF OPERATION, COST OF PURCHASE OF REPLACEMENT POWER
lost by reason of such delay to properly reflect the delay. The Purchaser’s acceptance of Equipment shall constitute a waiver of any claims for delay. OF CLAIMS OF THE PURCHASER OR CUSTOMERS OF THE PURCHASER FOR SERVICE INTERRUPTION WHETHER OR NOT SUCH LOSS OR DAMAGE IS
BASED ON CONTRACT, WARRANTY, TORT, NEGLIGENCE, INDEMNITY, STRICT LIABILITY OR OTHERWISE.
6. ACCEPTANCE OF THE GOODS BY THE CUSTOMER - Without prejudice to the provision of Condition 10 the Customer shall be deemed
to have accepted the Goods as being in accordance with the Contract unless within 14 working days of receipt of the Goods the Customer notifies the 12. GOVERNING LAW - The rights and obligations of the Purchaser and the Company shall be governed and construed in accordance with the
Company in writing of any defect in materials or workmanship or failure to comply with designs. drawings, specifications or other data supplied by the Laws of England and the Purchaser submits to the non-exclusive jurisdiction of the English Courts.
Customer or any failure of the Goods to conform with the Contract which would be apparent upon such inspection and testing of the Goods as it is reason-
able for the Customer to undertake within 14 working days. 13. EXECUTION - The Company shall not be bound by any contract or any modification thereto until approved in writing by an officer of the
Company. The Contract when so approved, shall supersede all previous communications either oral or written.
7. TAXES - All prices are exclusive of taxes (including without limitation any value added sales or similar tax), port rates, transportation, insurance,
custom dues, licence fees or other charges.
Ingersoll Rand Security Technologies is a leading global provider of products and services that make environments safe, secure
and productive. The sector’s market-leading products include electronic and biometric access control systems; time and attendance
and personnel scheduling systems; mechanical locks and portable security; door controls, exit devices and architectural hardware;
performance steel doorsets and automated openings; and other technologies and services for global security markets.