Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
2:1061DD
ACTUATOR
POSITIONER
LEVER
PEDESTAL
W6245-1/IL W6246-1/IL
2
Bulletin 61.2:1061DD
Specifications (Continued)
Dimensions Limit Switches: J Type 304 limit switch for one
Damper Drive Pedestal: To meet your through six single-pole, double-throw contacts (see
requirements. Specify the dimensions shown in separate bulletin), J GO(4) proximity switches for
figure 6 one or two single-pole, double-throw contacts, or
Actuator: See Bulletin 61.2:1061 J Micro-Switches or NAMCO switches for one or
Positioner: See Bulletin 62.1:3610 two single-pole, double-throw or double-pole,
double-throw contacts
Options Locking Mechanism: The locking mechanism is
Positioner: J Supply pressure gauge, J tire available for sizes J 30, J 40, J 60, and J 68
valves, or J plugs actuators.
Actuator: FlowScannert: Quick disconnect connections are
377 Series trip valves are available with available for use with the portable FlowScanner
J lock-in-last position, J fail-up, or J fail-down microprocessor-based diagnostic testing unit.
action (see separate bulletins)
Potentiometer: For remote rotation indication
1. This term is defined in ISA Standard S51.1.
2. For direct action, an increasing input signal extends actuator rod. For reverse action, an increasing input signal retracts actuator rod.
3. Actual actuator torque available depends on specific construction, degrees of rotation, and cylinder pressure. For information on torque
requirements of the valve being considered, contact your Fisher sales office.
4. The GO proximity switches are not available for size 80, 100 or 130 actuators.
3
Bulletin 61.2:1061DD
ACTUATOR ROD
CAM
FEEDBACK LEVER
POSITIONER
LEVER
OUTPUT
SHAFT
W3783-1/IL
CROSSOVER
ADJUSTMENT
DIRECT/
REVERSE
PLATE
ZERO
ADJUSTMENT
COARSE SPAN
ADJUSTMENT
MINOR LOOP
GAIN
ADJUSTMENT
FINE SPAN
ADJUSTMENT
W4900-1/IL
4
Bulletin 61.2:1061DD
ÇÇÇ
125
SIZE 100
ÇÇÇ
SIZE 30 SIZE 60
SUPPLY PRESSURE, PSIG
100
SIZE 68
85
65
50
0
2 4 6 8 12
0 10,000 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 110,000 120,000 130,000 140,000 150,000 160,000
45,000 65,000 175,000
AVAILABLE TORQUE, INCH-POUNDS
NOTES:
1. CYLINDER PRESSURE EQUALS SUPPLY PRESSURE FOR AN ACTUATOR WITHOUT A
POSITIONER OR FOR A TYPE 3620JP POSITIONER AND ACTUATOR COMBINATION. WHEN
ANOTHER POSITIONER IS USED, ASSUME CYLINDER PRESSURE IS 90% OF SUPPLY PRESSURE.
2 FOR SIZE 100, DO NOT EXCEED 6290 NSm (55,700 LBFSIN) WITH STANDARD 63.5 mm (2-1/2 INCH)
OUTPUT SHAFT.
A2216-2 / IL
5
Bulletin 61.2:1061DD
254
(10-INCH)
mm
(INCH)
A6352/IL
Figure 6. Dimensions
FlowScanner, Fisher, and Fisher-Rosemount are marks owned by Fisher Controls International, Inc. or Fisher-Rosemount Systems, Inc.
All other marks are the property of their respective owners.
EFisher Controls International, Inc. 1994, 2001; All Rights Reserved
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express
or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specifications of such products at any time without notice.
6
Printed in U.S.A.