Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
4. Internal Loadings Developed in Structural Members 4. Internal Loadings Developed in Structural Members
SHEAR AND MOMENT DIAGRAMS FOR A FRAME SHEAR AND MOMENT DIAGRAMS FOR A FRAME
A frame is composed of several connected members that are either Sketch the shear and moment diagrams for each member of the frame.
fixed or pin connected at their ends. To analyze the problem, the Assume the support A is a pin and D is a roller. Assume that the beam
procedure outlined in the shear and moment diagrams in the beams can and column connection is fixed.
be used. Note: all loadings are resolved into components acting parallel
and perpendicular to the member’s axis.
When drawing the moment diagram, always draw the moment diagram
positive on the compression side of the member.
4. Internal Loadings Developed in Structural Members 4. Internal Loadings Developed in Structural Members
SHEAR AND MOMENT DIAGRAMS FOR A FRAME SHEAR AND MOMENT DIAGRAMS FOR A FRAME
60 kN/m 8m
40 kN/m 2m
3m
A
A D
10m 4m 4m
4. Internal Loadings Developed in Structural Members 4. Internal Loadings Developed in Structural Members
1
9/18/2018
4. Internal Loadings Developed in Structural Members 4. Internal Loadings Developed in Structural Members
Draw the moment diagrams for the beam using the method of super- Draw the moment diagrams for the beam using the method of super-
position. Consider the beam to be cantilevered from pin at A. position.
5 kN/m
50 kN/m
150 kN-m
A B B
A C
12 kN-m
6m 6m
5m 15m