Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Exterior Hardware
2009 Collection
Traditional Designs - Exceptional Quality
Snug Cottage Hardware
The Snug Cottage Difference
BPPCG Plus “Ecoat”
(Black Polyester Powder Coat over hot dipped Galvanized)
What sets Snug Cottage Hardware apart is our
commitment to offering product that is
extremely rust resistant. We never powder
coat directly over mild steel. Powder coating
over a hot dipped galvanized surface is very
difficult. The zinc applied to mild steel
product to prevent rusting oxidizes very
quickly. If this layer of oxidation is not
removed completely prior to the application of
the powder coat then adhesion of the
powder coat to the zinc will be very poor.
We powder coat all of our hot dipped
galvanized product in the United States
by an automotive and military accredited
powder coating company.
All product is
subject to a 14
stage immersion
and spray
washing process,
a zinc phos wash for added rust protection,
an “E coat” applied (this is the norm for rust
protection in the automotive industry), and
finally a high quality UV resistant polyester
powder coat is applied prior to heat curing.
Hinges
Pages 6 to 15
Cane Bolts
Pages 22 to 23
The Oak Leaf symbol shown beside a product indicates it is made from Stainless steel
3
Latches
Pages 16 to 21
Rail Gate and Heav
The Maine Boar
3 Rail, 4 Rail, Double Driv
This Simple to Build Design Prod
Cane Bolts
Pages 22 to 23
Hinges
Pages 6 to 15
6
Heavy Duty Hinges
Length of Band Pin Diameter Product Code
Inches Inches BPPCG* Hot Dipped Galvanized**
7 1/2 8292-07SP 8292-072
12 1/2 8292-12SP 8292-122
All Stainless Steel 12” Old Fashioned Hinges 8292-12SS (See Page 8)
14 1/2 8292-14SP 8292-142
16 1/2 8292-16SP 8292-162
18 5/8 8292-18SP 8292-182
20 5/8 8292-20SP 8292-202
24 5/8 8292-24SP 8292-242
30 3/4 8292-30SP 8292-302
36 3/4 8292-36SP 8292-362
48 7/8 8292-48SP 8292-482
* BPPCG = Black Polyester Powder Coated over Hot Dipped Galvanized
Black Stainless Steel 2 inch #12 Wood Screws Included - Sold in Pairs
** Galvanized hinges supplied with 2 inch #12 Dacromet galvanized screws
Carriage Bolts
Please Note: Hinges require that a carriage bolt (preferred) or a lag bolt
be utilized on each hinge as shown in the examples displayed on this page.
These are not included as the length required will vary with the installation.
The use of hot dipped galvanized bolts or lags is recommended
(See Page 15 for hot dipped galvanized carriage bolts). We suggest finishing
the tops with our touch up paint (See Page 15) or black spray paint.
RECENTLY ADDED
48” Steel Hinge Set
12” Stainless Hinge Set (Page 8)
9” & 12” Stainless Adjustable
Hinges (Use on PVC or Wood)
(See Page 32)
7
Wood Hardware 12” Stainless Old Fashioned
Hinges
Heavy Duty Hinges
By Far and
Away the Best
Hinge for
Exterior Use
Available.
Similar design to our Old Fashioned Hinges (8292) but with curved strap. Black Powder coat over hot dipped galvanized mild steel. Strap partially wraps pin.
Pin is welded in place. Gives you the option of mounting with curve down for bow down gates or mounted with curve up for bow up gates. Template can be
downloaded as a PDF document from our web site.
Product Code Description
8292-S12L 12” Curved BPPCG* Hinge (left hand)
8292-S12R 12” Curved BPPCG* Hinge (right hand)
PRICE PRICE
REDUCED * BPPCG = Black Polyester Powder Coat over Galvanized. Sold Individually REDUCED
Please Note: Left hand hinge (8292-S12L) has the pin on the left side and curves down. It can also be used on
the right side with the curve up. Right hand hinge would be used in opposite position. Please specify left or
right when ordering. PDF profile available on our web site.
snugcottagehardware.com
9
Wood Hardware Cranked Bands with Pins
Hinges
• AVAILABLE IN 12”, 18”, 24”, AND 36” LENGTHS
• VERY ROBUST
• TRADITIONAL STYLE
• CAN BE USED MOUNTED FLUSH WITH FRONT OF
POST OR IDEAL WHEN THE GATE NEEDS TO BE SET
FLUSH BACK FROM THE FRONT OF THE POST AND STILL
MOUNTED HAVE A TIGHT FIT (AS LITTLE AS 1/8”) BETWEEN
THE GATE AND THE POST
• BLACK POLYESTER POWDER COAT
FINISH OVER HOT DIPPED GALVANIZED STEEL
• IF INSTALLED WITH BOTH PINS UP THEN THE GATE
CAN BE REMOVED EASILY
Length of Band Pin Diameter Product Code
Inches Inches BPPCG* Hot Dipped Galvanized**
12 1/2 8295-12SP 8295-122
18 5/8 8295-18SP 8295-182
24 5/8 8295-24SP 8295-242
36 3/4 8295-36SP 8295-362
* BPPCG = Black Polyester Powder Coated over Hot Dipped Galvanized
Black Stainless Steel 2 inch #12 Wood Screws Included - Sold in Pairs
** Galvanized hinges supplied with 2 inch #12 Dacromet galvanized screws
JAMB
MOUNTED
Please Note: This style of hinge has a loose fit on the pin. This
slackness will not be evident when both hinges are mounted.
snugcottagehardware.com
10 Phone (800) 637-5427 - Fax (519) 474-3337
Curved Cranked Bands with Pins
Very robust traditional style curved cranked band hinge with pin
on plate. The pin plate is 1.5” wide x 5 3/8” high. From the
center of the pin to the end of the bottom strap is 7”. From the
center of the pin to the end of the top strap is 11”. Template can
be downloaded as a PDF from our web site.
Can be flush mounted or jamb mounted.
A Black Polyester Powder Coat over Hot C
Left Down Dipped Galvanized. Right Down
B D
Left Up Right Up
Product Code Description Product Code Description
A 8295-S12LD Left Mount Curved DOWN C 8295-S12RD Right Mount Curved DOWN
B 8295-S12LU Left Mount Curved UP D 8295-S12RU Right Mount Curved UP
Sold in Set (Top and Bottom Hinge) Sold in Set (Top and Bottom Hinge)
F Also Available in
Also Available in Black Powder Coat Finish
11
Wood Hardware PRICE
REDUCED
Double Straps
3/4” Eye Hinges Eye Position Installations Length
3” BETWEEN DOUBLE STRAPS (SOLD INDIVIDUALLY)
Central Eye Inches
5
12
18
Between Posts or Behind Posts 24
Eye
Straight Eye
5
24
Rear Eye
12”
5
Gap As
Little as 1” 24
Available in
Hot Dipped Galvanized
18” Finish 3.5” BETWEEN DOUBLE STRAPS (SOLD INDIVIDUALLY
or Rear
r Eye
Black Polyester Powder
Coat over Hot 5
Dipper Galvanized
24” (BPPCG)
Gap As
• EXTREMELY HEAVY DUTY Little as 1”
• FABRICATED FROM 2” WIDE BY 1/4” THICK 24
STEEL
• 3” BETWEEN STRAPS
d galvanized
H dipped
Hot di galvanize
l i d carriage bolts, nuts, & washers included (Black touch up paint f
• 3/4” EYE TO FIT OUR 3/4” PINS
• HOT DIPPED GALVANIZED FINISH SINGLE STRAP HINGES (SOLD PER PAIR)
• OPTIONAL BLACK POLYESTER POWDER
COAT FINISH OVER HOT DIPPED GALVANIZED 18
(BPPCG)
• SOLD INDIVIDUALLY 24
12 NEW 36
- Single Straps PRICE
REDUCED
Wood Hardware
Product Code 3/4” Eye Hinges
A. Double Strap Hinge Sets
)
Our best hardware combination for larger field and entrance A
BPPCG * Galvanized gates. Combines heavy duty construction and strength with
8312-65SP 8312-652 easy adjustment. Set includes (12”, 18”, or 24” 8312 top strap,
adjustable bottom gate fitting and two pins (either 8800-002 or
8312-42SP 8312-422 8317-002).
Please Note: Supplied with 8800-002 or 8800-00P pins. If your 8800 Pin
8322-24SP 8322-242 require 8317-002 please specify at time of order.
or
B. Adjustable Bottom Fitting
8324-05SP 8324-052 EASY ADJUSTMENT. Up or down adjustment of the latch end 8317 Pin
of the gate is quick and easy requiring only a few seconds and a
wrench.
10”
13
8251-104 10” long
8307-36P 8307-362
snugcottagehardware.com
Wood Hardware A. 12” Threaded Adjustable E. Gate Hangers for
Pin (8800) Masonry or Stone (8257)
3/4” Diameter Pins Product Code Description Designed to be built into new construction masonry.
Arms are 12” long from center of pin. Arms can be
A 8800-002 Hot Dipped Galvanized
bent to conform to stone work.
8800-00P Black Powder Coat over HDG
now available in Product Code Description
black or galvanized B. 13” Field Gate Pin (8317) 8257-342 Hot Dipped Galvanized
With square section at pin end to prevent rotation in post.
Drill a 3/4” hole right through the post. Pin is driven into F. Pin to Screw (8308)
post until the thread protrudes from the opposite side. It 3/4” pin with 7” of 3/4” threaded shaft. This pin
is then drawn into the desired depth by tightening the nut. does offer an alternative to full bolts but is not as
Suitable for posts 6 to 9 inches thick.
strong or reliable as a pin that is bolted through the
B Product Code Description
entire post and held with a washer and nut.
D E Sold Individually or F
in Sets
Sold Individually or G
in Sets
14 snugcottagehardware.com
Fasteners Wood Hardware
A. Black Stainless Wood Screws Fasteners
Quantity 1 inch #8 1.5 inch # 8 2 inch #12
100 FP-BSS10C FP-BSS15C FP-BSS20C
A
1000 FP-BSS10M FP-BSS15M FP-BSS20M
1.5” #8
B. Carriage Bolts (Hot Dipped Galvanized)
2” #12
3/8” bolts for use with 7” thru 16” 8292 and 8295 hinges. 1/2” bolts are for use with 18” thru 1” #8
36” 8292 and 8295 hinges. 12 nuts, bolts, and washers per package. Use bolts 1/2” longer than
thickness of gate or door.
4
16 snugcottagehardware.com
Hampton Thumb Latch Wood Hardware
Our hampton thumb latch is fashioned on an Latches
old Pennsylvania design that dates back to the
late 1800’s.
• WILL NOT RUST (STAINLESS STEEL & ZINC/ALUMINUM
COMPONENTS)
• SHORT THUMB BAR FOR GATES UP TO 3” THICK
• LONG THUMB BAR FOR GATES 3.25” TO 5” THICK
• EASY TO INSTALL (REQUIRES SINGLE 3/4 INCH ROUND HOLE)
• FITS EITHER RIGHT OR LEFT HAND
• BLACK POLYESTER POWDER COAT FINISH
• SUPPLIED WITH BLACK STAINLESS STEEL
FASTENERS
• ORNATE FLIP OVER MECHANICAL LOCKING MECHANISM
• UP TO 1” GAP BETWEEN GATE AND POST
• 5.5” CAST STAINLESS STEEL BAR
• 7” HIGH ORNATE HANDLE
• CAN BE COMBINED WITH STAINLESS STEEL PADLOCK EYES IF
LOCKING IS REQUIRED (SEE PAGE 9)
Gate Thickness
up to 3” 3.25” to 5”
without Padlock Eyes
4300-WSSP 4300-WLSP
with Padlock Eyes
4300-WSEP 4300-WLEP
17
Wood Hardware Heavy Duty Floating Gravity Catch
Latches
Cast Iron Cabin Hooks
Also Available in
Stainless Steel
Product Code Description
4130-BSS 10” Black Handle (Stainless)
Wood Hardware Products
All stainless steel hardware for wood products supplied
4130-BSC 10” Brushed Stainless Handle by Snug Cottage Hardware are manufactured from 304
Also Available in stainless steel. Available in Black Powder Coat over
Stainless Steel or Natural Color Brushed Stainless Steel. The
Stain
oak leaf symbol indicates a Stainless Steel product
18
A. Mortise Twisted Ring Gate Latch Wood Hardware
This attractive latch features twisted ring pulls on both sides and is
ideally suited for gates that are set back from the front of the posts.
Latches
Black polyester powder coat over hot dipped galvanized laser cut
parts. Fits gates 2.5 to 5 inches thick. Requires 1 inch space between
gate and post.
C. Gate Stop
Mount our stainless steel gate stop on the gate
post to prevent damage to the gate and latch that CALL
can result from severe wind gusts when the gate BACKS
A is left open. Made of 1/8 inch thick stainless steel
with a polyester powder coat. 3.75 inches high, 1
inch stop surface, 1.5 inch mounting surface. Supplied with 1.5 inch B
stainless steel fasteners.
Gate
Gate Gate
Post
Gate
Post
Gate stop positioned to take the force of the gate closing
closing.
Product Code Description
1400-BSS Black Powder Coat Over Stainless Steel
1400-WSS White Powder Coat Over Stainless Steel
Gate Stop for PVC on Page 35.
D. Padlock Eyes C D
If the installation calls for a gate that has to be
lockable our padlock eyes are the solution.
Made from stainless steel with black powder
coat finish. Packaged with 1 inch stainless steel C
fasteners. Padlock not included.
Product Code Description
Black Powder Coat Over
1300-00SP
Stainless Steel
snugcottagehardware.com
19
Wood Hardware A. Cannonball Gate Closer B
Closers Snug Cottage Hardware is pleased to offer this unique and very attractive
gate closer from America’s colonial past. The cannonball closer is an
effective means of ensuring your gate always closes. It requires that an
additional post be installed behind the hinge post. The chain is attached
between this post and the gate with the five pound solid cast iron ball sus-
pended on the chain. Gravity does the rest!
We recommend the use of a gate stop on the gate post with or without a
latch, when using a cannonball gate closer.
Each cannonball closer is supplied with regular fence staples to attach the
chain to the post and gate. See Page 29 for other mounting options.
RUSTING
BUSTING Also Available in
20
A. Throw Over Gate Loop Spring Latch Wood Hardware - Heavy
Duty Latches & Hasps
Latch two gates together. Heavy duty construc- • FABRICATED FROM HEAVY SPRING
tion. Hot dipped galvanized finish or black STEEL
powder coat over galvanized. Fits gates 2 3/4” • VERY ROBUST LATCH, 24” HIGH
to 3 1/8” thick. Notch in throw over gate loop • CAN OPERATE FROM HORSE BACK A
closes over staple on plate. Can be locked with • FITS 3” THICK GATES
a padlock or snap fastener (essential when used • REQUIRES SQUARE POST (MINIMUM
with livestock). Includes fasteners and staple 6 X 6)
on plate. Padlock and clip not included. D. Behind Posts (8326)
Product Code Description • GATE BUILT 1” TO 2”
4200-032 Hot Dipped Galvanized WIDER THAN
OPENING
4200-03SP Black Powder Coat over HDG
• OPENS 180 DEGREES
B. “T” Hasp & Staple AND ALL HARDWARE
A
IS OUT OF THE WAY
Fabricated from 3/16 inch thick steel with hot
WHEN OPEN
dipped galvanized finish. 2” wide hasp. Overall
• LIVESTOCK CAN PUSH
size 6” x 6”.
ON GATE WITH NO
Product Code Description CHANCE OF OPENING IT
4000-002 Hot Dipped Galvanized (no Product Code Description
fasteners included)
8326-002 Hot Dipped Galvanized
4000-00SP BPPCG with Black Screws
8326-00P Black Powder Coat over HDG
C. Swivel Hasp & Staple E. Between Posts
Hasp rotates to be out of the way when open. (8327)
In locked position all screws are covered so it
cannot be defeated by a screwdriver. Fabricated • REQUIRES 4” BETWEEN
from 3/16” steel with hot dipped galvanized GATE AND POST
finish. 2” wide hasp. 8” long.
4
D E
Product Code Description
Product Code Description
4001-002 Hot Dipped Galvanized (no
fasteners included) 8327-002 Hot Dipped Galvanized
4001-00SP BPPCG with Black Screws 8327-00P Black Powder Coat over HDG
PRICE
B C
REDUCED
PRICE
REDUCED
Unlocked
Position
Locked
Position
21
Wood Hardware Cane Bolt
Cane Bolts Stainless Steel
5/8” Diameter Rod x 18” or 24” Long
Black Powder Coat Over Stainless
or
22 Our new retainer (fits on the edge of 1.5” thick lumber) allows for either left or right hand
application. Can also be used to secure the top of a door.
C Cane Bolt - Lockable Wood Hardware
Hot Dipped Galvanized Cane Bolts
NEW
A. Lockable one piece
• AVAILABLE IN 12” (4” DROP), 15” (6” DROP), AND 24” (10”
36” DROP) A
long •
•
LOCKABLE (PADLOCK NOT INCLUDED)
HOT DIPPED GALVANIZED OR BLACK POWDER COAT
OVER HDG
7/8” • HEAVY 5/8” ROD
Length Product Code
rod Inches BPPCG* Galvanized
12 5000-12SP 5000-122
15 5000-15SP 5000-152
24 5000-24SP 5000-242
* BPPCG = Black Powder Coated Over Galvanized
Black Cane Bolts packaged with 2” x 5/16” lag bolts
23
Rolling Door
Hardware
Standoff
Fasteners are included (for doors upto 2” thick). Lag bolts for the track
must be ordered separately. This product line is black
powder coated over an “E coat” rust protection
layer. “E” coating is very common in the auto indus-
try but does not offer the same degree of
protection against rust as hot dipped galvanized.
Product Specifications and Installation
Instructions are available on our web site.
Door Stop
Small Single
Track Stop
Strap hanger
3/16” Chain is only recommended for light duty applications, such as residential installations.
Minimum size recommended for commercial applications is 1/4” chain with maximum post spacing of 6
linear feet. 1/4”, 5/16” or 3/8” is suitable for use with Boston Garden Posts.and Central Park Posts.
3/16”
1/4”
In Victorian England spikes were
welded into landscape chain to
discourage loiterers. Today, this
product is commonly seen
throughout the U.K. adorning
estates, parks, and monuments.
Alternate Link Spiked Chain
5/16”
(3827)
Actual
Every 4th Link Spiked Chain Size
(3827)
3/8”
snugcottagehardware.com
27
Boston Garden Post
Our BOSTON GARDEN POST is a full size reproduction of the
handsome posts and caps that line the walkways of America’s
oldest park, the Boston Botanical Garden.
Our caps are cast in aluminum and secured to the post with
two set screws just like the original. The posts are
constructed from a heavy aluminum extruded “I” beam that
has been notched to accept the chain. Therefore, there is
no chance of rust or corrosion. Both the posts and caps are
coated with a high quality black polyester powder coat.
Central
Park Post
Actual Size
2.25” x 1.75”
28 snugcottagehardware.com
Actual Size
2.25” x 1.75”
Chain Accessories
Staple on 2” Square Cast Iron Hook to fit
Chain Type Quick Links* “D” Shackle Hook on 2” Square Plate
Plate threaded rod **
Nantucket Traditional
• WILL NOT RUST (STAINLESS STEEL & ZINC/ALUMINUM
COMPONENTS
• SHORT THUMB BAR FOR GATES UP TO 3” THICK
• LONG THUMB BAR FOR GATES 3.25” TO 5” THICK
• EASY TO INSTALL (REQUIRES SINGLE 3/4 INCH ROUND
HOLE)
• FITS EITHER RIGHT OR LEFT HAND
• BLACK POLYESTER POWDER COAT FINISH
• SUPPLIED WITH BLACK STAINLESS STEEL “TEK” FASTENERS
• ORNATE FLIP OVER MECHANICAL LOCKING MECHANISM
• UP TO 1” GAP BETWEEN GATE AND POST
• 5.5” CAST STAINLESS STEEL BAR
• 7” HIGH ORNATE HANDLE
• CAN BE COMBINED WITH STAINLESS STEEL PADLOCK EYES
IF LOCKING IS REQUIRED (SEE PAGE 19)
Gate Thickness
up to 3” 3.25” to 5”
without Padlock Eyes
4300-PSSP 4300-PLSP
wrap around padlock eyes
with Padlock Eyes
catch plate (optional)
4300-PSEP 4300-PLEP
A
A. Optional stainless steel padlock
eyes (padlock not included)
available if gate needs a key
locking mechanism
(See version for WOOD installations
latching bar and catch on Page 17)
• ATTRACTIVE
TWISTED
RING LATCH
WITH STAINLESS Front View
STEEL BAR, RETAINER AND CATCH
• FOR GATES UP TO 5” THICK
• BLACK POLYESTER POWDER COAT FINISH
• OPERATES FROM BOTH SIDES
• SUPPLIED WITH BLACK STAINLESS STEEL
“TEK” FASTENERS
• EASY TO INSTALL (REQUIRES
SINGLE 3/4” INCH ROUND HOLE) WRAP
AROUND PLATE IS ALSO THE TEMPLATE FOR
PERFECT INSTALLATION Back View
• CAN BE COMBINED WITH STAINLESS STEEL
PADLOCK EYES IF LOCKING IS REQUIRED (SEE
PAGE 19)
Product Code
Black with screws Black with screws and Stainless Padlock Eyes
4149-P6SP 4149-PESP
Nantucket Traditional
• 304 STAINLESS STRAPS AND
CAST 304 STAINLESS CUPS
• BLACK POLYESTER
POWDER COATED
• SLOTTED STRAP FOR EASY
ADJUSTMENT (ADJUSTS
Beautiful New 1/2” EITHER WAY OF A 1”
England Fence Designs GAP
Dominate the PVC fence industry. BETWEEN GATE AND POST)
• EASY TO INSTALL - GATE
Now Snug Cottage offers
hardware that accentuates those SANDWICHED BETWEEN
designs while offering high STRAPS OFFERS STRENGTH
durability and superior AND SUPPORT - GATE POST
performance. AND GATE STYLE INSERT
RECOMMENDED
• SUPPLIED WITH 5” X 1/4”
BLACK STAINLESS CAR-
RIAGE BOLTS, NUTS, AND
WASHERS FOR GATES UP TO
4” THICK
• BLACK STAINLESS TEK
SCREWS TO ATTACH CUPS
TO POST
• FILLER BLOCKS ARE
REQUIRED IF RAILS ARE
THINNER THAN STILES (THE
USE OF SOLID MATERIAL
Front View SUCH AS AZEK IS
RECOMMENDED)
Strap Detail
Back View
showing AZEK
Filler Blocks
Product Code Description
8292-09PSS 9” Adjustable Black Stainless Strap Hinge
8292-12PSS 12” Adjustable Black Stainless Strap Hinge
1. 2. 3. 4.
place first strap back plate using a 5/16” bit drill three Flip the gate over. attach Attach the strap with pins to
so bend hooks around edge of perpendicular holes at least second back plate on the back front of gate using carriage
post and centered on rails. half way through the side at the same level as the bolts. Pass bolts thru strap,
attach back plate and block thickness of the gate. first back plate. drill holes as both back plates, secure with
using screws. in steps 1 & 2. washers and nuts
Call 800-637-5427
for case quantity pricing
3 1/4” wide by 3 1/2” high, residential wrap around self closing (ten-
sion adjustable) stainless steel hinges. Intended for gates up to 72”
wide by 72” high. Available in either black or white polyester powder
coat finish. Stainless steel “TEK” fasteners included.
Auto Closing Gate Latch
NEW improved
design
separate retainer lets you select
the amount of drop
no awkward protuberances on
the bar to line up Stainless steel gate stop for
use on pvc. “T” profile with each
wing 1.5” wide. Dramatically
24” wrap around stainless decreases gate problems and
steel cane bolt with call backs!! Can be mounted on
separate retainer. The gate or gate post. Use on PVC
separate retainer can be or wood installations.
set so that the bar can be Product Code Description
raised or lowered anywhere 1400-PSS Black Stainless Gate Stop
between 1 and 10 inches. It
1400-PWSS White Stainless Gate Stop
also eliminates the
frustration of lining up
protuberances on the bar
with holes on the guides.
you Gate
Gate
post
Gate thinner
than post
(mount on gate)
snugcottagehardware.com
Stop Absorbs the Force of The
Gate Closing, Protecting the 35
Latch
SNUG COTTAGE HARDWARE
Old Fashioned Hardware - Old Fashioned Quality