Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
CLO 1: Practice and perform correct techniques in handling fitting and machining
works and equipments. (P3)
PLO 3: Design solutions for well-defined technical problems and assist with the design
of systems, components or processes to meet specified needs with appropriate
consideration for public health and safety, cultural, societal, and environmental
considerations (DK5)
NO
NAME REGISTRATION NO
.
CLASS : GROUP :
LECTURER NAME :
SUBMISSION
DATE :
2.0) INTRODUCTION
Marks
3.0) OBJECTIVE
1) ……………………………………………………………………………………………………………………………
2) ……………………………………………………………………………………………………………………………
3) ……………………………………………………………………………………………………………………………
4) ……………………………………………………………………………………………………………………………
Marks
Page 2
Machining Workshop Report
4.0) TOOLS/EQUIPMENT
1) …………………………….………………. 9) …………………………………………………….
2) ……………………………………….……. 10) ……………………………………………………
3) ……………………………………….……. 11) ……………………………………………………
4) ……………………………………….……. 12) ……………………………………………………
5) ……………………………………….……. 13) …………………………………………………….
6) ……………………………………….……. 14) …………………………………………………….
7) ……………………………………………. 15) …………………………………………………….
8) ……………………………………………. 16) …………………………………………………….
Marks
1) ……………………………………………………………………………………………………………………………
2) ……………………………………………………………………………………………………………………………
3) …………………………………………………………………………………………………………………………..
4) ……………………………………………………………………………………………………………………………
5) ……………………………………………………………………………………………………………………………
6) ……………………………………………………………………………………………………………………………
7) ……………………………………………………………………………………………………………………………
8) ……………………………………………………………………………………………………………………………
Marks
Page 3
Machining Workshop Report
Procedures Diagram
Page 4
Machining Workshop Report
Procedures Diagram
Page 5
Machining Workshop Report
Marks
7.0) DISCUSSION
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………….......................................
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
………………………………………………………………………………………………….........................................
Marks
8.0) CONCLUSION
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
Page 6
Machining Workshop Report
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
Marks
9.0) REFERENCES
………………………………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………………………………
Marks
Page 7
POLITEKNIK NILAI, NEGERI SEMBILAN
JABATAN KEJURUTERAAN MEKANIKAL
RUBRIC FOR REPORT (MACHINING) – (10%)
CLO 1: Practice and perform correct techniques in handling fitting and machining works and equipments. (P3).
PLO 3: Design solutions for well-defined technical problems and assist with the design of systems, components or processes to meet specified needs with appropriate
consideration for public health and safety, cultural, societal, and environmental considerations (DK5).
NO SCORE
CRITERIA
3 2 1
Starts with overall concept and explaining
There is some connection to the curriculum,
how this relates to curriculum and all the There is no discussion of important of lab; it
1. INTRODUCTION but most of the central ideas related to the
relevant information discussion in lab is is basically copy from lab sheet.
lab are missing.
included.
Can state the objectives to finished the Can specify the objectives to finished the Can describe the objectives to finished the
2. OBJECTIVE
practical task clearly practical task correctly practical task accurately
All necessary lab material included and listed All necessary lab material included but not There is not a list of the necessary
3. TOOL / EQUIPMENT
in organized manner. list in any particular order. equipment use in workshop
Procedures are listed in clear step and Procedures are listed in clear step but not Safety procedures are listed but not in clear
4. SAFETY PRECAUTION
number and/or in complete sentences. number and/or in complete sentences steps.
4 3 2 1
Procedures are listed in clear step,
Procedures are listed in clear step Procedures are listed in clear
number and/or in complete Procedures are listed but
5. PROCEDURE and number and/or in complete step but not number and/or in
sentences and diagram are included not in clear steps.
sentences. complete sentences.
to describe the set-up.
RUBRIC FORM PRACTICAL REPORT
3 2 1
6. DISCUSSION Related with long life learning Slightly related with long life learning Not related with long life learning
Detailed analyze and integrate acquired Briefly analyze and integrate acquired Hardly analyze and integrate acquired
7. CONCLUSION
information with own ideas information with own ideas information with own ideas
Reference from variable sources; Reference from variable sources ;
8. REFERENCE Reference from 1 book and internet
more than 3 books and internets 2-3 book and internet
Note: This rubric is to be used with lab write-up handout. If any part of write-up is missing, a score of 0 will be given.
Final Total Marks = 25/25 x 100 = 100%