three or four bundled conductors. The bull-wheel grooves are made up of high resistance interchangeable nylon sectors. The machine is completely electronically controlled.
Tensioner Performance Configuration
Max tension 140 kN Negative self-acting hydraulic brake Max speed 5 km/h Hydraulic dynamometer with set-point and automatic control of maximum pull 2920
Pull-Back Performance Hydraulic oil cooling system
Max pull 140 kN Digital meter counter Max speed 1.8 km/h Control instruments for hydraulic system and Note: the basic machine performance is calculated at Diesel engine 20°C and at sea level Rigid axle for towing at max speed of 30 3960 Characteristics km/h with mechanical parking brake Bull-wheel diameter 1500 mm Hydraulic power pack to control up to 4 reel stands with hydraulic head, not independent Max conductor diameter 40 mm control Mass 6200 kg Hydraulic front stabiliser Engine Grounding connection point 2500
Diesel 48 kW (64 hp) Available Devices
Cooling system water ALL001 Lighting system for the trailer Electrical system 24 V ALL002 Air brake system for the trailer Hydraulic Transmission ALL005 Hydraulic power for an external Hydraulic circuit that provides very sensitive compressor tensioning control and negligible deviations of ALL037 Preheating device for use up to tension in case of speed change. -30°C ALL071 4 hydraulic conductor clamps for drum change operations ALL080 Special nylon sectors kit ALL089 Electronic arrangement for connection of multiple machines and for stringing synchronization
Certified Quality System
ISO 9001:2008 Keep you updated on: www.tesmec.com Tesmec S.p.A. Headquarters Manufacturing facilities Manufacturing facilities Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy 1250 Tel: +39.035.4232911 - Fax: +39.035.4522445 Tel: +39.035.825024 - Fax: +39.035.826375 Tel: +39.031.858311 - Fax: +39.031.853562 Ed. 2015/2016 PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE