Sei sulla pagina 1di 9

Technical Datasheet DS05

SuperFlux LEDs
Introduction
This revolutionary package design allows the lighting designer to
reduce the number of LEDs required and provide a more uniform
and unique illuminated appearance than with other LED solutions.
This is possible through the efficient optical package design and
highcurrent capabilities.

The low profile package can be easily coupled with reflectors or


lenses to efficiently distribute light and provide the desired lit
Key Benefits
appearance. This product family employs the world's brightest red,
redorange, amber, blue, cyan, and green LED materials, which ΠRugged Lighting Products
ΠElectricity Savings
allow designers to match the color of many lighting applications ΠMaintenance Savings
like vehicle signal lamps, specialty lighting, and electronic signs.
Features
ΠHigh Luminance
HPWAMH00 ΠUniform Color
HPWTMH00 ΠLow Power Consumption
HPWADH00 ΠLow Thermal Resistance
HPWTDH00 ΠLow Profile
HPWTRD00 ΠMeets SAE/ECE/JIS
HPWTBH00 Automotive Color
HPWTMD00 Requirements
HPWTRL00 ΠPackaged in tubes for use with
HPWTDD00 automatic insertion equipment
HPWTML00
HPWTBD00
HPWTDL00 Typical
HPWTRH00 Applications
HPWTBL00
HPWNMB00 ΠAutomotive Exterior Lighting
HPWNMC00 ΠElectronic Signs and Signals
HPWNMG00 ΠSpecialty Lighting
Outline Drawings Selection Guide

Table 1

Total Flux ΦV (LM)


@
HPWA,
70 mA[1](H Total Included
HPWT) Angle θ90V
50 mA (HPWN) (Degrees) [2]
Device Type LED Color Typ. Typ.

HPWAMH00 AS AlInGaP RedOrange 1.5 95


HPWADH00 75

HPWTRD00 44 X 88
HPWTMD00 TS AlInGaP Red 3.5 100
HPWTDD00 70
HPWTBD00 50

HPWTRH00 44 X 88
HPWTMH00 TS AlInGaP RedOrange 4.2 100
HPWTDH00 70
HPWTBH00 50

HPWTRL00 44 X 88
HPWTML00 TS AlInGaP Amber 1.7 100
HPWTDL00 70
HPWTBL00 50

HPWNMB00 InGaN Blue 2.0 110

HPWNMC00 InGaN Cyan 5.0 110

HPWNMG00 InGaN Green 4.5 110

Notes:
1.Φv is the total luminous flux output as measured with
an integrating sphere after the device has stabilized.
(RθJA = 200°C/W, TA = 25ºC)
2.θ0.90 V is the included angle at which 90% of the total
luminous flux is captured.

Absolute Maximum Ratings at


TA = 25ºC
Table 2

Parameter HPWA HPWT HPWN Units

DC Forward Current [1]


70 70 50 mA
Power Dissipation 187 221 233 mW

Reverse Voltage (IR = 100 µA) 10 10 0.55 V

Operating Temperature Range 40 to +100 ºC

Storage Temperature Range 55 to +100 ºC

High Temperature Chamber 125ºC, 2 Hours

LED Junction Temperature 125ºC

Solder Conditions [2]


Preheat Temperature 85 +/ 15°C, 20 sec (Max 30 sec)
Solder Temperature 235 +/ 5°C, 2.5 +/ 0.5 sec
[1.5mm (0.06 in) below seating plane

SuperFlux LEDs Technical Datasheet DS05 (7/05) 2


Optical Characteristics at Electrical Characteristics at TA=25°C
TA = 25°C, IF = 70 mA (HPWA, HPWT),
Table 4
IF = 50 mA (HPWN), RθJA = 200°C/W
Forward Voltage
VF (Volts) Reverse
Table 3
@ Breakdown Capacitance Thermal
Total Luminous IF = 70mA (HPWA, VR (Volts)[1] C (pF) Resistance Speed of
Peak Dominant Included Intensity/ Viewing HPWT) @ IR = 100 VF = 0, RθJPIN Response
Wavelength Wavelength Angle θ0.90 V Total Flux Angle θ1/2 IF = 50 mA (HPWN) µA F = 1MHz. (°C/W) τs (ns) [2]
Device λpeak (nm) λdom(nm)[1] (Degrees)[2] Iv(cd)/ Φv(lm) (Degrees)
Device
Type Typ. Typ. Typ. Typ. Typ.
Type Min Typ Max Min Typ. Typ. Typ. Typ.
HPWAMH00 624 618 95 0.6 90
HPWAxH00 1.83 2.1 2.67 10 20 40 155 20
HPWADH00 75 0.9 60
HPWTxD00 2.19 2.5 3.03 10 20 40 125 20
HPWTRD00 44 X 88 1.25 25 x 68
HPWTMD00 640 630 100 0.6 70 HPWTxH00 2.19 2.5 3.03 10 20 40 125 20

HPWTDD00 70 1.5 40 HPWTxL00 2.19 2.6 3.15 10 20 40 125 20


HPWTBD00 50 2.0 30
HPWNxB00 3.29 3.8 4.66 0.55 0.65 1900 130 20
HPWTRH00 44 X 88 1.25 25 x 68
HPWNxC00 3.29 3.8 4.66 0.55 0.65 1900 130 20
HPWTMH00 626 620 100 0.6 70
HPWTDH00 70 1.5 40 HPWNxG00 3.29 3.9 4.66 0.55 0.65 1900 130 20
HPWTBH00 50 2.0 30

HPWTRL00 44 X 88 1.25 25 x 68
HPWTML00 596 594 100 0.6 70
Notes:
HPWTDL00 70 1.5 40 1.Operation in reverse bias is not recommended.
HPWTBL00 50 2.0 30 2.τs is the time constant, et/τs.
HPWNMB00 460 470 110 0.9 90
HPWNMC00 503 505 110 0.9 90
HPWNMG00 520 525 110 0.9 90

Notes:
1.The dominant wavelength is derived from the CIE
Chromaticity Diagram and represents the perceived color
of the device.
2.θ0.90 V is the included angle at which 90% of the total lumi
nous flux is captured.

SuperFlux LEDs Technical Datasheet DS05 (7/05) 3


Part Number Selection
Red
Part Number Description Viewing Angle Min. Flux[1] Max Flux Minimum Maximum
θ1/2 (Degrees) Φv (lm) Φv (lm) Intensity (cd) Intensity (cd)
HPWTRD0000000 25 X 68 1.5 1.9
HPWTRD00D4000 25 X 68 2.0 4.8 2.5 6.0
HPWTRD00E4000 25 X 68 2.5 6.1 3.1 7.6
HPWTRD00F4000 25 X 68 3.0 7.3 3.8 9.1
HPWTBD0000000 30 1.5 3.0
HPWTBD00D4000 30 2.0 4.8 4.0 9.6
HPWTBD00E4000 30 2.5 6.1 5.0 12.2
HPWTBD00F4000 SuperFlux 30 3.0 7.3 6.0 14.6
HPWTDD0000000 LED 40 1.5 2.3
HPWTDD00D4000 40 2.0 4.8 3.0 7.2
HPWTDD00E4000 40 2.5 6.1 3.8 9.2
HPWTDD00F4000 40 3.0 7.3 4.5 11.0
HPWTMD0000000 70 1.5 0.9
HPWTMD00D4000 70 2.0 4.8 1.2 2.9
HPWTMD00E4000 70 2.5 6.1 1.5 3.7
HPWTMD00F4000 70 3.0 7.3 1.8 4.4

Note:
1. Φv is the total luminous flux output as measured with an integrating sphere after the device has stabilized.

SuperFlux LEDs Technical Datasheet DS05 (7/05) 4


RedOrange
Part Number Description Viewing Angle Min. Flux Max Flux Minimum Maximum
θ1/2 (Degrees) Φv (lm) Φv (lm) Intensity (cd) Intensity (cd)
HPWTRH0000000 25 X 68 1.5 1.9
HPWTRH00D4000 25 X 68 2.0 4.8 2.5 6.0
HPWTRH00E4000 25 X 68 2.5 6.1 3.1 7.6
HPWTRH00F4000 25 X 68 3.0 7.3 3.8 9.1
HPWTRH00G4000 25 X 68 3.5 9.7 4.4 12.1
HPWTRH00H4000 25 X 68 4.0 12.0 5.0 15.0
HPWTBH0000000 30 1.5 3.0
HPWTBH00D4000 30 2.0 4.8 4.0 9.6
HPWTBH00E4000 30 2.5 6.1 5.0 12.2
HPWTBH00F4000 30 3.0 7.3 6.0 14.6
HPWTBH00G4000 30 3.5 9.7 7.0 19.4
HPWTBH00H4000 30 4.0 12.0 8.0 24.0
HPWTDH0000000 40 1.5 2.3
HPWTDH00D4000 SuperFlux 40 2.0 4.8 3.0 7.2
HPWTDH00E4000 LED 40 2.5 6.1 3.8 9.2
HPWTDH00F4000 40 3.0 7.3 4.5 11.0
HPWTDH00G4000 40 3.5 9.7 5.3 14.6
HPWTDH00H4000 40 4.0 12.0 6.0 18.0
HPWTMH0000000 70 1.5 0.9
HPWTMH00D4000 70 2.0 4.8 1.2 2.9
HPWTMH00E4000 70 2.5 6.1 1.5 3.7
HPWTMH00F4000 70 3.0 7.3 1.8 4.4
HPWTMH00G4000 70 3.5 9.7 2.1 5.8
HPWTMH00H4000 70 4.0 12.0 2.4 7.2
HPWAMH00B4000 90 1.0 3.6 0.6 2.2
HPWADH00B4000 40 1.0 3.6 1.5 5.4
HPWAMH00C4000 90 1.5 4.2 0.9 2.5
HPWADH00C4000 40 1.5 4.2 2.3 6.3

Amber
Part Number Description Viewing Angle Min. Flux Max Flux Minimum Maximum
θ1/2 (Degrees) Φv (lm) Φv (lm) Intensity (cd) Intensity (cd)
HPWTRL0000000 25 X 68 1.0 1.3
HPWTRL00C4000 25 X 68 1.5 4.2 1.9 5.3
HPWTRL00D4000 25 X 68 2.0 4.8 2.5 6.0
HPWTBL0000000 30 1.0 2.0
HPWTBL00C4000 30 1.5 4.2 3.0 8.4
HPWTBL00D4000 SuperFlux 30 2.0 4.8 4.0 9.6
HPWTDL0000000 LED 40 1.0 1.5
HPWTDL00C4000 40 1.5 4.2 2.3 6.3
HPWTDL00D4000 40 2.0 4.8 3.0 7.2
HPWTML0000000 70 1.0 0.6
HPWTML00C4000 70 1.5 4.2 0.9 2.5
HPWTML00D4000 70 2.0 4.8 1.2 2.9

SuperFlux LEDs Technical Datasheet DS05 (7/05) 5


Green
Part Number Description Viewing Angle Min. Flux Max Flux Minimum Maximum
θ1/2 (Degrees) Φv (lm) Φv (lm) Intensity (cd) Intensity (cd)
HPWNMG0000000 SuperFlux 90 3.0 2.7
LED

Cyan
Part Number Description Viewing Angle Min. Flux Max Flux Minimum Maximum
θ1/2 (Degrees) Φv (lm) Φv (lm) Intensity (cd) Intensity (cd)
HPWNMC0000000 SuperFlux 90 3.0 2.7
LED

Blue
Part Number Description Viewing Angle Min. Flux Max Flux Minimum Maximum
θ1/2 (Degrees) Φv (lm) Φv (lm) Intensity (cd) Intensity (cd)
HPWNMB0000000 SuperFlux 90 1.0 0.9
LED

SuperFlux LEDs Technical Datasheet DS05 (7/05) 6


Figures

Figure 3. HPWA/HPWTxx00 Relative Luminous Flux


Figure 1a. Relative Intensity vs. Wavelength vs. Forward Current.
70
1.0

60

MAXIMUM DC CURRENT (mA)


HPWN-MC00 50
Rth(j-a) = 300 C/W
Rth(j-a) = 400 C/W
HPWN-MG00 40
RELATIVE INTESITY

Rth(j-a) = 500 C/W


HPWN-MB00
30 Rth(j-a) = 600 C/W

0.5
20

10

0
0 20 40 60 80 100
AMBIENT TEMPERATURE (C)

0.0
Figure 4a. HPWAxx00 Maximum DC Forward Current
350 400 450 500 550 600 650
WAVELENGTH (nm) vs. Ambient Temperature.
Figure 1b. Relative Intensity vs. Wavelength (HPWN)
70

60
MAXIMUM DC CURRENT (mA)

50

40
Rth(j-a) = 300 C/W
30 Rth(j-a) = 400 C/W
Rth(j-a) = 500 C/W
20 Rth(j-a) = 600 C/W

10

0
0 20 40 60 80 100
AMBIENT TEMPERATURE (C)

Figure 4b. HPWTxx00 Maximum DC Forward Current


vs. Ambient Temperature.
Figure 2a. Forward Current vs. Forward Voltage
50
MAXIMUM DC CURRENT (mA)

40

Rth(j-a) = 300
30
Rth(j-a) = 400
Rth(j-a) = 500
20
Rth(j-a) = 600

10

0
0 20 40 60 80 100 120 140
AMBIENT TEMPERATURE - (C)

Figure 4c. HPWNxx00 Maximum DC Forward Current


vs. Ambient Temperature.
Note:
Figure 2b. Forward Current vs. Forward Voltage 1.24mm2 of Cu pad per emitter at cathode lead is recom
mended for lowest thermal resistance.
SuperFlux LEDs Technical Datasheet DS05 (7/05) 7
Figure 5e. HPWA(T)Dx00 Relative Luminous Intensity
Figure 5a. HPWTRx00 Relative Luminous Intensity vs.
vs. Off Axis Angle.
Off Axis Angle.

Figure 5f. HPWTBx00 Relative Luminous Intensity


vs. Off Axis Angle.
Figure 5b. HPWTRx00 Relative Luminous Intensity
vs. Off Axis Angle. IsoIntensity Contour Plot.

1.4

1.3

1.2

1.1
RELATIVE LUMINOUS INT

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2 Typical Upper Bound


0.1 Typical Lower Bound
0
-100 -80 -60 -40 -20 0 20 40 60 80 100

OFF AXIS ANGLE (DEGREES)

Figure 5g. HPWNMx00 Relative Luminous Intensity


Figure 5c. HPWAMx00 Relative Luminous Intensity
vs. Off Axis Angle
vs. Off Axis Angle.

Figure 5d. HPWTMx00 Relative Luminous Intensity


vs. Off Axis Angle.

SuperFlux LEDs Technical Datasheet DS05 (7/05) 8


Company Information
Lumileds is a worldclass supplier of Light Emitting Diodes (LEDs)
Lumileds may make process or materials
producing billions of LEDs annually. Lumileds is a fully integrated changes affecting the performance or
supplier, producing core LED material in all three base colors (Red, other characteristics of our products.
These products supplied after such
Green, Blue) and White. Lumileds has R&D development centers in changes will continue to meet published
specifications, but may not be identical
San Jose, California and Best, The Netherlands. Production capabili to products supplied as samples or
under prior orders.
ties in San Jose, California and Malaysia.
Lumileds is pioneering the highflux LED technology and bridging the
gap between solid state LED technology and the lighting world.
Lumileds is absolutely dedicated to bringing the best and brightest
LED technology to enable new applications and markets in the
lighting world.

www.luxeon.com
www.lumiledsfuture.com

For technical assistance or the


location of your nearest sales
office contact any of the
following:

North America:
+1 888 589 3662 or
askluxeon@futureelectronics.com

Europe:
00 800 443 88 873 or
luxeon.europe@futureelectronics.com

Asia:
©2005 Lumileds Lighting U.S., LLC. All rights reserved. Lumileds Lighting is a joint venture between Agilent 800 5864 5337 or
Technologies and Philips Lighting. Luxeon is a registered trademark of Lumileds Lighting. Product specifications
are subject to change without notice.
lumileds.asia@futureelectronics.com

Potrebbero piacerti anche