No. Confirmed) 1 Are drafting contents like dimension text, lines, grid number, grid circle, hidden line graphics, user defined graphics etc. are as per the Work Instruction BKE 7301 EMC01? 2 All the parts applicable to concerned support shown in continuous and other entities as dotted 3 Is title block/ revision block / drawing in line with the Work Instruction BKE 7301 EMC01? 4 Is drawing scale agreed with customer/project team implemented 5 Is title block / revision block complete as per Work Instruction BKE 7301 EMC01? 6 Is building mentioned correctly 7 Does the support KKS match with the support at line 8 Is nominal piping diameter correct 9 Is the support function matching with stress analysis report 10 Is the support function code matching with PDS model 11 Is the insulation thickness matching with PDS model 12 Is the coordinate system axis shown 13 Key plan with respect to nearest grid correct 14 Does the location(E, N, EL) of support in drawing match to that in PDS model 15 Is KKS of Pipe(s) appearing in drawing correct 16 Is the support dimensioned completely in X and Y directions 17 Is the auxiliary/ existing structures and concrete located in X, Y and Z directions wherever appropriate 18 Does the dimension of the support matches with model and confirm to drawing scale 19 Is view direction for section detail is sufficient and complete 20 Dimensions rounded of to next mm 21 For Springs hangers/ rod hanger/ snubbers presetting, if any to meet the 4 deg criteria 22 Are all part number appearing in the drawing mentioned in BOM 23 Is quantity of Part members correct 24 Description of part members correct 25 Check whether existing insert plates are used or plate with anchor bolts 26 Is the standard notes is complete for the concerned project