Sei sulla pagina 1di 7

SanoLuxe Automatic Sanitizer Dispenser

Installation and Use Instructions


(Model: SL-201)

Thank you for choosing our company's intelligent


temperature measurement and disinfection products,
please read and follow the instructions below to install
and use this product. Please visit our website to
download our most recent documentation for this product.

www.sanoluxe.com
PRODUCT STRUCTURE DESCRIPTION

Filler opening
Temperature sensor
Infrared sensor for human body

Red indicator light for abnormal functioning /


Green indicator light for proper functioning

LCD Body temperature display screen

Spray / gel nozzle for disinfectant

Drip catcher tray

ON/OFF dispenser switch

DC Power interface
DISPENSER AND BATTERY INSTALLATION

1. Battery installation
Pull down the battery cover on the back of the dispenser to access
the battery slots. Insert 4 AA batteries according to the positive and
negative signs and then put back the cover.

1 2

4 AA batteries
(not included)

2. Assemble the drip catching tray


Insert the back panel into the tray and then slide it into the channels
on the back of the dispenser. Secure it with the 2 included screws

3 4
INSTALLATION METHOD

1. Wall-mounted dispenser

Measure the distance Drill 2 holes in the wall Insert the plastic Place the dispenser
between the holes on at the desired location anchors and screws on the screws
the back of the with the measured into the holes like You are done.
dispenser. distance between them in the picture above

2. Free-standing dispenser
TEMPERATURE MEASURING
Install the two round fasteners around the stand pole
and secure them with the 4 included screws
Place your hands within 3-5cm of the sensor for 2
seconds before you sanitize your hands, do not use
the back of your hand. The LCD screen will indicate
the measured body temperature and will change its
color to red if the temperature is higher than normal.
FILLING THE DISINFECTANT

Open the cap at the top of the dispenser and take out the directed air cover,
then fill the container with liquid spray disinfectant or gel hand sanitizer. Put
the air cover back on. Turn on the dispenser after you put batteries or you
connected the DC adapter cable. Put your hands in the detecting area of the
dispenser sensor a few times so that the liquid reach the nozzle. The liquid
output of the dispenser is 0.5ml/time for the liquid disinfectant and 1ml/time
for the gel hand sanitizer.

ATTENTION
1) Please keep your hands dry and clean before testing the temperature.
The temperature deviation is +0.3 oC. The color of the LCD screen will
be green for normal temperature, orange for slightly higher temperature
and red for high body temperature.
2) When the disinfectant in the dispenser is insufficient, the red indicator
light will flash continuously. When the dispenser is running low on
batteries the indicator light will start flashing and you should change
the batteries or connect it to the DC adapter. With new batteries the
dispenser is able to spray liquid around 5000 times.
3) Make sure you turn on the switch on the right side of the dispenser
before use
PRODUCT SPECIFICATION

Model SL-201
Operating Voltage DC5V±10%
Verification Mode High precision infrared sensing test
Method of hand
Liquid disinfectant and gel disinfectant
disinfection

Category Spray type and gel type


Quantity of liquid Gel: 1.2-1.5ml Spray: 0.5ml
LCD HD Screen Green (normal temperature) ; Red (high temperature)
Measuring range 35.5°C - 42°C (Non-medical product functions)
Accuracy Accuracy: ±0.3°C Hand distance 3cm - 5cm
Infrared induction, strong anti-interference, not
Trigger mode
affected by light changes and skin color
Margin The red light turns on when the liquid is low
Capacity 1300ml fillable inner bottle
Pump head Service life for more than 300,000 times
Power supply 4AA batteries or external 5V 1A included adapter
Size 131mm (wide) x 399mm (height) x 138mm (depth)
Shell material ABS material
Installation Wall-mounted , Desktop, Freestand
Using environment Indoor environment: 10°C - 40°C

WARNING: the function of measuring temperature of this product


is not a medical DEVICE, it is only used TO quick check THE human
body temperature! After POWERING ON, the temperature measuring
module should be LEFT for 15 minutes before entering the normal
temperature test.
Deekoo Retail Services LLC warrants its SL-201 Automa c Dispenser to be made of first class materials, free from defects of
material or workmanship under normal use and to perform the service for which they are intended in a thoroughly reliable and
efficient manner when properly installed and serviced, for a period of three years (1 year for special finishes) from date of
purchase. During this period, Deekoo Retail Services LLC will, at its op on, repair or replace any part or parts which prove to
be thus defec ve if returned to Deekoo Retail Services LLC, at customer’s cost, and this shall be the sole remedy available
under this warranty. No claims will be allowed for labor, transporta on or other incidental costs. This warranty extends only to
persons or organiza ons who purchase Deekoo Retail Services LLC’s products directly from Deekoo Retail Services LLC for
purpose of resale.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENT
IS DEEKOO RETAIL SERVICES LLC RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES OF ANY MEASURE WHATSOEVER.

Potrebbero piacerti anche