Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Fluid Data
Flowrate m^3/h 30.00 60.00
Viscosity cP 1.00 0.50
Density Kg/m^3 1000.00 950.00
Calculations
Pipe Cross Sectional Area m^2 0.0048 0.0082
Fluid Velocity m/s 1.747 2.029
Reynold's Number, Re 136157 394280
Flow Turbulent Turbulent
Friction Factor, f (Darcy's) 0.01996 0.01575
K Value for fittings 6.75 8.67
Head Loss
Due to Fittings m 1.050 1.821
Due to Friction m 3.986 1.616
Due to Elevation m 10.000 5.000
Pressure Drop
Total Head Loss m 15.04 8.44
Pressure Drop bar 1.47 0.79
Fittings
90° Elbow
Threaded, r/D = 1 1
Threaded, Long Radius, r/D = 1.5
Flanged, Welded, Bend, r/D = 1
Flanged, Welded, Bend, r/D = 2
Flanged, Welded, Bend, r/D = 4
Flanged, Welded, Bend, r/D = 6
Mitered, 1 Weld, 90°
Mitered, 2 Weld, 45°
Mitered, 3 Weld, 30°
Mitered, 4 Weld, 22.5°
Mitered, 5 Weld, 18° 1
45° Elbow
Standard, r/D = 1 1
Long Radius, r/D = 1.5 1
Mitered, 1 Weld, 45°
Mitered, 2 Weld, 22.5°
180° Bend
Threaded, r/D = 1 1
Flanged/ Welded, r/D = 1 1
Long Radius, r/D = 1.5
Tees
Standard, Threaded, r/D = 1 1
Long Radius, Threaded, r/D = 1.5 1
Standard, Flanged/Welded, r/D = 1
Stub-in Branch
Run Through Threaded, r/D = 1
Run Through Flanged/Welded, r/D = 1
Run Through Stub in Branch 1
Valves
Angle Valve = 45°, β = 1 2
Angle Valve = 90°, β = 1
Globe Valve, β = 1 1
Plug Valve, Branch Flow
Plug Valve, Straight Through
Plug Valve, 3-way, Flow Through
Gate Valve, β = 1 1
Ball Valve, β = 1 1
Butterfly Valve
Diaphragm Valve, Dam Type
Swing Check Valve
Lift Check Valve
Tilting Disk Check Valve
Reducer D2 , mm 38.100 38.100
Square Reduction
Qty
Tapered Reduction
θ° 30 30
Qty 1
Rounded Pipe Reduction
Thick Orifice
L , mm 25.4 25.4
Qty
Tapered Expansion
θ° 45 45
Qty
Pipe Entrances
Flush / Square Edged
Qty
Rounded
r/D 0.02 0.02 0.02 0.02 0.02
Qty
Inward Projecting
Qty
Chamfered
Qty
Pipe Exits
Pipe Exit Qty
Total K Value 6.75 8.67
Disclaimer : These spreadsheets are distributed at no charge on an as-is basis. The author does not assume any liability
for their use.