Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
MBRD340, MBRD350,
MBRD360
MBRD320, MBRD340 and MBRD360 are Preferred Devices
SWITCHMODE
Power Rectifiers http://onsemi.com
DPAK Surface Mount Package
SCHOTTKY BARRIER
These state−of−the−art devices are designed for use as output RECTIFIERS
rectifiers, free wheeling, protection and steering diodes in switching 3.0 AMPERES, 20 − 60 VOLTS
power supplies, inverters and other inductive switching circuits.
Features
1 4
• Extremely Fast Switching
• Extremely Low Forward Drop 3
MARKING DIAGRAM
YWW
B
3x0G
Y = Year
WW = Work Week
B3x0 = Device Code
x = 2, 3, 4, 5, or 6
G = Pb−Free Package
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 3 of this data sheet.
MAXIMUM RATINGS
MBRD
Rating Symbol Unit
320 330 340 350 360
Peak Repetitive Reverse Voltage VRRM 20 30 40 50 60 V
Working Peak Reverse Voltage VRWM
DC Blocking Voltage VR
Average Rectified Forward Current (TC = +125°C, Rated VR) IF(AV) 3 A
Peak Repetitive Forward Current, TC = +125°C IFRM 6 A
(Rated VR, Square Wave, 20 kHz)
Nonrepetitive Peak Surge Current IFSM 75 A
(Surge applied at rated load conditions halfwave, single phase, 60 Hz)
THERMAL CHARACTERISTICS
Rating Symbol Value Unit
Maximum Thermal Resistance, Junction−to−Case RqJC 6 °C/W
Maximum Thermal Resistance, Junction−to−Ambient (Note 2) RqJA 80 °C/W
ELECTRICAL CHARACTERISTICS
Maximum Instantaneous Forward Voltage (Note 3) VF V
iF = 3 Amps, TC = +25°C 0.6
iF = 3 Amps, TC = +125°C 0.45
iF = 6 Amps, TC = +25°C 0.7
iF = 6 Amps, TC = +125°C 0.625
Maximum Instantaneous Reverse Current (Note 3) iR mA
(Rated dc Voltage, TC = +25°C) 0.2
(Rated dc Voltage, TC = +125°C) 20
1. The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dPD/dTJ < 1/RqJA.
2. Rating applies when surface mounted on the minimum pad size recommended.
3. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
http://onsemi.com
2
MBRD320, MBRD330, MBRD340, MBRD350, MBRD360
ORDERING INFORMATION
Device Package Shipping†
MBRD320 DPAK 75 Units / Rail
MBRD320G DPAK 75 Units / Rail
(Pb−Free)
http://onsemi.com
3
MBRD320, MBRD330, MBRD340, MBRD350, MBRD360
TYPICAL CHARACTERISTICS
100 100
40 TJ = 150°C
20
10
0.02
0.01 25°C
10
0.004
0.002
0.001
0 10 20 30 40 50 60 70
VR, REVERSE VOLTAGE (VOLTS)
*The curves shown are typical for the highest voltage device in the
150°C voltage grouping. Typical reverse current for lower voltage selections
TJ = 25°C can be estimated from these curves if VR is sufficient below rated VR.
Figure 2. Typical Reverse Current
125°C
http://onsemi.com
4
MBRD320, MBRD330, MBRD340, MBRD350, MBRD360
8.0 4.0
I F(AV) , AVERAGE FORWARD CURRENT (AMPS)
1.0 0.5
0 0
80 90 100 110 120 130 140 150 160 0 20 40 60 80 100 120 140 160
TC, CASE TEMPERATURE (°C) TA, AMBIENT TEMPERATURE (°C)
1K
700
500
300
C, CAPACITANCE (pF)
200
TJ = 25°C
100
70
50
30
20
10
0 10 20 30 40 50 60 70
VR, REVERSE VOLTAGE (VOLTS)
http://onsemi.com
5
MBRD320, MBRD330, MBRD340, MBRD350, MBRD360
PACKAGE DIMENSIONS
SOLDERING FOOTPRINT*
6.20 3.00
0.244 0.118
2.58
0.102
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent
rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur.
Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries,
affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury
or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an
Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
http://onsemi.com MBRD320/D
6