Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
BALL F316
TRIM
ROD F316
STEM 'O' RING / PACKING GRAFOIL
SPRINGS INCONEL
FIRE SAFE API SPC 6FA
NOTES: 1) Valves shall comply with specification of this document and AGIP 15801.PIP.MEC.SDS. 18) Stem roughness shall be of 63 Ra maximum.
5) Antistatic device must be provided. 23) The extension welds shall be checked with dye penetrant.
RATING 7) Designations " non corrosive", " corrosive" and " NACE" are clarified on AGIP 15801.PIP.MEC.SDS. 24) The valves must be supplied with plug at vent and drain location. The sizes shall be according
°C bar °C bar 9) For cryogenic test see AGIP 11544.PIP.MME.SDS. to API SPEC 6 D
-196 148.9 10) For transition nozzles, if any, see AGIP 15801.PIP.MEC.SDS. 26) Valves shall be double block and bleed in the trunnion construction.
38 148.9 11) Graphite density shall be of 1.1 gr. / cm³ minimum. 27) Valves will be fitted with an extension drain plug.
M 50 144,3 12) Internal diameter of piping element to be connected shall be specified for butt-welding type valves. 28) Valves will be trunnion mounted type.
O 100 126,6
D
. 120 121,1 DIMENSIONS (mm) , WEIGHTS (kg)
M VALVE SIZE (inch) 1/2 3/4 1 1½ 2 3 4 6 8 10 12 14 16 18 20 24 26 28 30 32 34 36
E
FACE TO FACE RF - 381.0 457.2 609.6 736.6 838.2 965.2 1028.7 1130.3
C
. OR BW - 381.0 457.2 609.6 736.6 838.2 965.2 1028.7 1130.3
V END TO END RJ - 384.2 460.4 612.8 739.8 841.4 968.4 1038.2 1139.8
L
Tolerances - +/-1.6 +/-3.2
I
. TEST BORE DIAMETER min. - 76 101 152 203 254 304 323 374
HYDROSTATIC bar HANDWHEEL Center to top 225 265 315 349 427 475 499 556
0
SHELL 223.9 Diameter -
0
5 SEAT 153.8 OPERATOR WRENCH GEAR
/ AIR bar WEIGHT Flanged - 98 181 387 557 819 1128 1609 2009
1
SEAT 5.5 (appr.) BW - 78 136 296 432 637 1030 1264 1591
S
H BALL VALVES
0 Agip Internal Normalization VB 536 AG DR
1 RATING : 900 lb API SPEC 6D
VALVE ENDS : FLANGED / BUTT WELDING Sheet Prep'd 28.02.2006
BODY / ENDS MATERIAL : ASTM A 182 F316 / ASTM A 351 CF8M 1 / 1 Rev . 0 05656.PIP.MEC.STD
This document is Company property. The Company lawfully reserves all rights.