Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Full-Size Header
Card Reducer
Edge Adapter
(if permitted—see
i t
interposer Half-Size
Half Size Header
description)
1
Overview of PCIe Probe Systems
s Interposers Multi-lead Probes MidBus Probes
2
Overview of PCIe Probe Systems
s Interposers Multi-lead Probes MidBus Probes
Compatible
p Systems
y
Legacy Analyzers (no longer sold
d) (legacy systems) For
Details
Summit PETracer See Page
Part Number Description T2-16 ML
Probes for PCIe 1.0a (Supporting data rate of 2.5 GT/s)
800-0110-00 Gen1 Passive Slot Interposer
PE007UIA-X Gen1 AMC Interposer
PE036UIA-X Gen1 XMC Interposer
PE006UIA-X
PE006UIA X Gen1 ExpressCard Interposer
PE032UIA-X Gen1 ExpressModule Interposer
PE005ACA-X PETracer Multi-lead Probe
PE001UAA-X Gen1 x8 MidBus Probe Kit (Full Size)
PE004ACA-X Gen1 x4 MidBus Probe Kit (Half Size)
Probes for PCIe 2.0 (Supporting data rates of 2.5 GT/s and
d 5 GT/s)
PE075UIA-X Gen2 x16 Passive Slot Interposer
PE074UIA-X Gen2 x8 Passive Slot Interposer
4
PE073UIA-X Gen2 x4 Passive Slot Interposer
PE072UIA-X Gen2 x1 Passive Slot Interposer
PE018UIA-X Gen2 Active Slot Interposer (up to x16) 4
PE069UIA-X Gen2 Active Slot Interposer (up to x8) 4
PE060UIA-X Gen2 AMC Interposer 5
PE048UIA-X Gen2 XMC Interposer 5
PE070UIA-X Gen2 VPX Interposer 6
PE049UIA-X Gen2 Mini Card Interposer (Mini-to-Mini)
6
PE051UIA-X Gen2 Mini Card Interposer (Mini-to-PCIe)
PE055UIA X
PE055UIA-X Gen2 ExpressCard Interposer 5
PE050UIA-X Gen2 External Cable Interposer 6
PE061UIA-X Gen2 CompactPCI Serial Interposer 5
PE037UIA-X Gen2 HP BladeServer Interposer 6
PE041ACA-X Gen2 x16 Summit Multi-lead Probe
PE040ACA-X Gen2 x8 Summit Multi-lead Probe
10
PE039ACA-X Gen2 x4 Summit Multi-lead Probe
PE038ACA-X Gen2 x1 Summit Multi-lead Probe
PE061ACA-X Gen2 x8 MidBus Probe Kit (Full Size)
8
PE062ACA-X Gen2 x4 MidBus Probe Kit (Half Size)
Note: Systems marked with ““ use legacy connection cable PE012UCA-X.
3
Passive and Active Slot Interposers Interposers Multi-lead Probes MidBus Probes
Part Numbers: PE018UIA-X (up to x16) The Gen2 Active Slot Interposers are designed for use
Gen2 Active Slot Interposer PE069UIA-X (up to x8) with the Summit Analyzers, and support lane widths up
to x16 (PE018UIA-X) or up to x8 (PE069UIA-X). For lane
Summit T3-16 widths up to x8, one iPass Y-cable is required
Analyzer
y (PE010UCA-X). For x16 applications, two iPass Y-cables
are required. For Summit T24, use PE013UCA-X.
If you need to install these interposers into a smaller
lane width slot, use a card reducer edge adapter
(PE002UIA-X, PE003UIA-X, or PE004UIA-X).
iPass Y-Cables For convenience, these products are also sold in kits
1 m PN: PE010UCA-X that include the required iPass cables (PE019UIA-X for
x16, PE068UIA-X for x8).
One cable supports x8 applications,
Two are required for x16 applications.
Gen3 M
M.2
2 Interposer P Numbers:
Part N b PE089UIA X (NVMe
PE089UIA-X (NVM x4)4) The Gen3 MM.22 Interposer is designed for testing SSD
modules designed to M.2 specifications. PE089UIA-X is
PE090UIA-X (SATA Express x2) designed to support socket 3 memory modules using
iPass Y-Cable
e NMVe x4. PE090UIA-X is designed for socket 2
1 m PN: PEE010UCA-X memory modules using SATA Express x2.
Both interposers support M.2 memory modules in
Summit T3-8 SSD
lengths of 42mm x 22mm, 60mm x 22mm, 80mm x
Analyzer under
22mm and 110mm x 22mm. The device under test is
test
mounted on the interposer, and the cables provide a
Host connection to the host M.2 slot.
Slot
One iPass Y-cable (PE010UCA-X) is required for Summit
T3-16, T3-8 and T28 systems. For Summit T24, use a
PE013UCA-X iPass x4-to-x8 cable.
4
Specialty Interposer Systems Interposers Multi-lead Probes MidBus Probes
5
Specialty Interposer Systems Interposers Multi-lead Probes MidBus Probes
6
Specialty Interposer Systems Interposers Multi-lead Probes MidBus Probes
ExpressModule
E M d l 1 meter Y-cable.
Y cable
Card Under Test
7
MidBus Probe Systems Interposers Multi-lead Probes MidBus Probes
Gen2 MidBus Probe Kit for Summit T24 The Gen2 MidBus Probe Kit for the Summit T24
Part Number: PE081ACA-X support lane widths from x1 to x4 at data rates of
2.5 GT/s and 5.0 GT/s.
To prepare a PCB for use with the Gen2 MidBus
Summit T24 Analyzer Probe, an attachment pad is designed into the
layout, and a retention module is mounted to this
pad. A header cable attaches from this header to
iPass Cable (1m) the MidBus Probe Pod, and a reference clock
PN: PE013UCA-X cable (PE014UCA-X)
(PE014UCA X) also connects from the PCB
One cable supports to the pod. The pod then attaches to the Summit
up to x4 applications T24 analyzer using an iPass cable (PE013UCA-X).
PE075ACA-X
Half-size MidBus
Probe Head
Retention Module:
PE076ACA-X Universal
PE014UCA-X
Ref Clock Cable
Gen2 MidBus Probe Kit The Gen2 MidBus Probe Kits support lane widths
Part Numbers: PE061ACA-X from x1 to x16 at data rates of 2.5 GT/s and 5.0
PE062ACA-X GT/s.
To prepare a PCB for use with the Gen2 MidBus
Probe, an attachment pad is designed into the
layout, and a retention module is mounted to this
pad.
d Ah header
d cable
bl attaches
tt h ffrom thi
this h
header
d tto
the MidBus Probe Pod, and a reference clock
iP
Pass Y-Cables (1m)
cable (PE014UCA-X) also connects from the PCB
PN: PE010UCA-X
PE014UCA-X to the pod. The pod then attaches to the Summit
Ref Clock Cable On
ne cable supports analyzer using an iPass Y-cable (PE010UCA-X).
MidBus x8 applications, For x16, use two x8 Pods and two iPass Y-cable
Probe Pod Tw
wo are required for assemblies.
(PE071UIA-X) x16 applications.
Note: A customer using this
One pod configuration can also create
supports x8, an interposer card using the
two are required PE027UIA-X
PE027UIA X Dual MidBus
for x16. PE008ACA-X Interposer.
Full-size MidBus
8
MidBus Probe Systems Interposers Multi-lead Probes MidBus Probes
G 3 MidBus
Gen3 MidB Probe
P b Kit The Gen3 MidBus Probe is designed for use with
Part Number: PE050ACA-X (Full Size) the Summit T3-16 and Summit T3-8 Analyzers,
PE051ACA-X (Half Size) and supports lane widths from x1 to x16 at data
rates of 2.5 GT/s, 5 GT/s and 8 GT/s.
To prepare a PCB for use with the Gen3 MidBus
Probe, an attachment pad is designed into the
iPass Y-Cable
layout, and a probe connector is mounted to this
PE010UCA-X
pad. A probe cable attaches from this connector
One cable supports to the PE054UIA-X Gen3 MidBus Probe Pod, and
x8 applications,
applications a reference clock cable also connects from the
Two are required for PCB to the pod. The pod then attaches to the
x16 applications. Summit analyzer using an iPass Y-cable
(PE010UCA-X). For x16, use two Pods and two
cable assemblies.
PE054ACA-X
Gen3 MidBus Pod
x16 Configuration (shown here) uses two
One pod supports x8, Pods, cable assemblies, and headers.
two are required for x16
PE014UCA X
PE014UCA-X
Ref Clock Cable
Probe Cable
PE052ACA-X Full-Size
PE053ACA-X Half Size Probe Connector
PE047UIA-X Full-Size
PE054UIA-X Half Size
Gen2 Multi-lead Probe Kit for Summit T24 The Gen2 Multi-lead Probe Kit for the Summit
PE080ACA X G2 x4 Multi
PE080ACA-X Multi-lead
lead Probe Pod T24 Analyzer supports lane widths of x1 to x4
at data rates up to 5 GT/s.
PE086ACA-X G2 x1 Multi-lead Probe Set Summit T2
24 Analyzer
The Gen2 Multi-lead Probe for Summit T24
consists of a probe pod (PE083UIA-X) which
PE0014UCA-X
can support up to sixteen coax cables
Ref Clock
C Cable
(PE036ACA-X) which connect in pairs to multi-
lead flex tips (PE020ACA-X). Each flex tip
PE013UCA-X PE
E036ACA-X allows the user to solder connections to traces
iPass Cable Coax Cable on the PCB under test.
The connection from the pod to the Summit
T24 analyzer is made using an iPass x4-to-x8
PE
E020ACA-X
cable (PE013UCA-X).
Multi-lead Probe Pod Flex Tip
PE083UIA-X
9
Multi-lead Probe Systems Interposers Multi-lead Probes MidBus Probes
Gen2 Multi
Multi-lead
lead Probe The Summit Gen2 Multi-lead
Multi lead Probe is designed
Part Number: PE0___ACA-X Bus Width x1 x4 x8 x16 for use with the Summit Family of Protocol
fill in PN Analyzers (except Summit T24, see page 9 for
Part Number 38 39 40 41
Summit T24 Multi-lead probe). The probe
Y-Cable* consists of 1 to 4 probe pods which are
1* 1* connected to the analyzer using either iPass Y-
PE010UCA-X
Cables (for x1 and x4) or straight x4-to-x8 iPass
iPass Cables cables (for x8 and x16). Each probe pod supports
2 4
PE013UCA-X
up to 8 Flex Tips, with each Flex Tip connected
x4 via two coax cables.
x4 Probe Pods
Configuration 1 1 2 4
PE067UIA-X
Sh
Shown H
Here The Flex Tips are soldered directly to exposed
Coax Cables bus traces located anywhere on the PCB within
4 16 32 64 approximately 40 cm (16”) of the probe pod, and
PE036ACA-X
provide a high impedance connection to maintain
Flex Tips (470Ω) the signal integrity of the PCI Express bus.
2 8 16 32
PE037ACA-X
Lane Widths x1, x2, x4 x1, x4, x8, x16 x1, x4,
x x8, x16 x1, x2, x4 x1, x4, x8, x16 x1, x4, x8, x16
2.5 GT/s, 2.5 GT/s, 2.5 GT/s, 2.5 GT/s, 2.5 GT/s, 2.5 GT/s,
Data Rates
5 GT/s 5 GT/s T/s, 8 GT/s
5 GT 5 GT/s 5 GT/s 5 GT/s, 8 GT/s
iPass from iPass from iPass from
Power Source 12V DC external iPass frrom analyzer 12V DC external
analyzer analyzer analyzer
x4-to-x8 iPass x4-to
o-x8 iPass iPass Y-Cable(s) iPass Y-Cable(s)
Analyzer Connector x4-to-x8 iPass (x8, x16) or (x88, x16) or x4-to-x8 iPass via Gen2 via Gen3 MidBus
Y-Cable (x1, x4) Y-Cabble (x1, x4) MidBus Pod Pod
Pod Required x4 PE083UIA-X x4 PE067UIA-X x4 PE
E065UIA-X x4 PE082UIA-X x4 PE071UIA-X x4 PE054UIA-X
See product datasheets for complete specification information
10
Specifications for Interposers
Dimensions 5.75” x 6.6” 8.6” x 7.0” 15” x 3.1” 7” x 14” 4.25” x 9” 3.9” x 11.9” 3.9” x 11.9”
x1, x2, x4, x1, x2, x4, x1, x2, x4, x1, x2, x4, x8,
Lane Width x8, x16 x8, x16 x8, x16
x1, x2, x4, x8 x1, x2, x4, x8 x1
x16
x1, x2, x4, x8
Impedance
85 ohm 85 ohm 100 ohm 85
5 ohm 85 ohm 85 ohm 85 ohm 85 ohm
(Differential)
Analyzer iPass Y-cable iPass Y-cable iPass Y-cable iPass iPass iPass
iPass
s Y-cable iPass Y-cable
Connector** (2 for x16) (2 for x16) (2 for x16) Y-cable Y-cable Y-cable
Gen3
IInterposer Gen2
G Gen2 Gen3 Gen3
G G
Gen3
Gen2 SFF-8639 Gen3
Probe External HP Blade 90 Degree
D Express SFF-8639
Mini Card Single- M.2
System Cable System Se
erver Module Dual-Port
Port
PE062UIA-X
PE049UIA-X PE05
58UIA-X PE089UIA-X
Part Number PE036UIA-X PE037UIA-X PE063UIA-X PE018UIA-X PE088UIA-X
PE051UIA-X PE05
59UIA-X PE090UIA-X
PE064UIA-X
Impedance
85 ohm 85 ohm 85 ohm 85 ohm 85 ohm 85 ohm 85 ohm 85 ohm
(Differential)
*Card
*C d meets
t PCIe
PCI CEM requirements
i t exceptt for
f physical
h i l dimensions,
di i as notted
t d immediately
i di t l below.
b l
**Summit T24 Systems always use iPass x4-to-x8 cable (PE013UCA-X). All other systems use iPass Y-Cable (PE010UCA-X).
See product datasheets for complete specification information
11
General Purpose Adapters and Extenders
Part Part
Product Image Product Image
Number Number
PCI EExpress x4
4 tto PCI E
Express C
Cardd to
IB2X4 PCIE2EXP
Infiniband x4 Adapter ExpressCard Slot Adapter
PCI Express x4
Edge Connector PCI Express MINI Card to
IB2X4E MINI2EXP
to Infiniband x4 ExpressCard Slot Adapter
Adapter
PCI Express
PCI Express x16 to x1 MINI to PCI Express Slot,
PEA1621 MINI2PCIE
Adapter Passive
Adapter
©2013 Teledyne LeCroy. All rights reserved. Specifications, prices, availability and deliivery subject to change without notice. PCIPROBES
Product or brand names are trademarks or requested trademarks of their respective ho olders. 1013