Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
PARKLINE N5001-IS
Made in Germany
Area of application
The Parkline N 5001-IS serves as independent parking on 2 levels, above ground. The entrance level has sliding
platforms and one empty space. The top platforms move only vertically.
Standard
100 free space 50 • load per platform
35 35
max. 2000 kg
• load per wheel
35
max. 500 kg
50
75
26
free space Optional
only when • load per platform
column heigth CH
clearance CL
clearance CL
Dimensions in cm.
+3 %
10
-10 %
concrete min. 18, B25, 500
evenness to DIN 18202 table 3, line 3 550 300
System data
car height below 150 180 200 210 180 195 210
Optional low-laying platform* 160 190 210 220 190 205 220
car height above 150 150 155 155 210 225 250
standard
* A low clearance platform (below level) can optionally be delivered. Therefore cut-out must be provided.
Vehicle data
Optional vehicle data: Vehicle length: up to 520cm, load per platform: max. 2600kg, load per wheel max. 65 0kg
The Parkline-IS is void of power transmission parts such as chains and ropes =
Direct power transmission: Less moving parts & high safety in operation.
empty space
to
slide sideways
W1 W2 W1
Layout A
Sliding doors between pillars, columns supplied by the
employer min. every 2 segment, otherwise assembly of
gates in front of the column.
Layout B
Sliding doors in front of pillars.
A Layout C
Sliding doors behind pillars: The employer must
gate-break C C consider the system length of 545cm behind the
Scope of supply
Installation with sliding platforms and one empty space
on the entrance level and on top with vertical moving
platforms. Completely with hydraulic driving elements
and electrical control elements.
Dimensions L x W x H
Hydraulic unit
approx. 60 cm x 22cm x 40cm
Driving plates
Switch cabinet Driving plates as trapezoidal sheet plates as standard,
approx. 60 cm x 22cm x 80cm options see “Extra Equipment“.
Extra Equipment and Options
Vehicle weight
Optional vehicle weight: up to 2600kg
Installation of gates
• see detail on page 3 „Installation Layout Gates“
Foundation
Foundation works exactly to size, clean and dry is to be completed by the start of the installation. Bonded anchors
for high foundation requirements shall be provided if neccessary, available also as option.
Foundation plan
back wall
detail X
F1 F1
L2
F3 3 holes of dowel F3
F3 F3
min F2 (per roller, 1 platform = 4 rollers) per base plate
16
roller-channels, width: 3 cm, fat: 2cm L1 20
L
L
F2 (per roller, 1 platform = 4 rollers)
20
F2 F2 F1
R1 R R1
column 1 2 3 4 5 6
Vertical measurements as limits in mm
with measuring points distances in m to*
line reference 0,1 1 4 10 15
9 9 switch cabinet
2 1
11
free space 3
Technical modifications are reserved to Otto Nussbaum GmbH & Co. KG. PROSPEKT N5001-IS-E · Version 25032008 · NK
Item Performance Quantity Designation Location Frequency
2 on site 1 feed cable 5 G 2,5 mm² or in the feed cable to the 1x per system
to local requirements switch cabinet
3 on site 1 potential equalisation to DIN EN 60204 from foundation earth 1x per system
connector to the system
The items 4-11 are included in the scope of supply, unless otherwise specified in the offer/order.