Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
APP DOT - 3
DESCRIPTION
APP DOT - 3 is a high quality brake fluid formulated from synthetic fluid and special additives for which a
DOT 3 or SAE J1703 fluid is specified. APP DOT - 3 designed for use in hydraulic brake and clutch systems
under normal service conditions.
APPLICATION
APP DOT - 3 is particulary suitable for use in hydraulic brake and clutch systems for which a DOT 3 or SAE
J1703 fluid is specified.
Passenger cars, commercial road transport, off-highway vehicles, agricultural tractors and motorcycles.
APP DOT - 3 is completely miscible with one onother and are compatible with other approved DOT 3.
BENEFITS
High boiling point prevent “vapor lock” in braking Exceptional thermal stability and oxidation stability
systems. Low pressure vapor, compatible with brake and
APP DOT -3 is particulary suitable for all seals clutch system component, including rubber seals.
type, particulary seals type made in Vietnam. High boiling point is particulary suitable for disc
Viscosity suitable at cold as well as high type.
temperatures Safety in use
PERFORMANCE STANDARDS
FMVSS No. 116 DOT 3 SAE J1703 ISO 4925
TYPICAL CHARACTERISTICS
Component Values SAE J1703
Appearance Orange Liquid -
Density @ 20C, kg/l 1.102 N/A
Viscosity @ 100C, cSt 2.2 1.5
0
Equilibrium Reflux Boiling Pt., C 235 205
pH (50 % V. ethanol-water solution) 8 7-11
Pour point, C -42 -
2
Corrosion in Glassware, mg/cm .
Cast iron 0.098 0.2 max
Aluminum 0.006 0.1 max
Copper 0.031 0.4 max
The information prepared provides the typical properties that are considered as representative. Some variation which will not affect
performance is possible