Sei sulla pagina 1di 2

BACK

Industrial DIN Rail Mount


Switching Power Supplies
All specifications are typical at nominal input, full load, and 25DegC
unless otherwise noted DRL Series

INPUT SPECIFICATIONS GENERAL SPECIFICATIONS

Input Voltage, Nominal 85-265VAC (most models)


Nominal: 100-240VAC Input-Out Isolation 3000VAC
Input Frequency 47-440 Hz, 50-60Hz Nom. Output-Ground Isolation 500VAC
Inrush Current 20A @ 100VAC, typ Input-Ground Isolation 1500VAC
Efficiency (@ Full Load) 75 - 80%, typ

OUTPUT SPECIFICATIONS

Output Voltage/Current See Specific Model


Initial Accuracy +/-1%, adjustable ENVIRONMENTAL SPECIFICATIONS
Voltage Adjust +/-10%, typ
Load Regulation +/-1%, typ Oper. Temperature -10 to +60 Deg C
Line Regulation +/-1%, typ (Free-air Convection)
Temperature Coefficient +/-0.03%/DegC Relative Humidity 0-95%, Non-Condensing
Ripple/Noise(20Mhz BW) 100mV Pk-Pk, typ Storage Temperature -25 to +70 DegC *
Overvoltage Protection Clamp, 130-150% * MTBF 110,000 Hrs
Hold Up Time 20mS, typ Mil Std 217, 25C
Short Circuit Protection Continuous, self-recovering*
Current Limit 130% typ,Self-Reset Foldback PHYSICAL SPECIFICATIONS

Case Material Steel Cover/Aluminum


* These are stress ratings. Exposure of the devices to any of these conditions may Construction Enclosed Open Frame
adversely affect long term reliability. Proper operation under conditions other than the I/O Connections Screw Terminals
standard operating conditions is neither warranteed or implied.

PERFORMANCE CURVES

100 90
90
Typical Efficiency, %

80 80
Output Current, %

70
60 70
50
40 60
30
20 50
10
0 40
-10 0 10 20 30 40 50 60 70 10 25 50 75 100
Ambient Temp., DegC % of Full Load

Astrodyne products are not authorized or warranteed for


use as critical components in life support systems,
300 Myles Standish Blvd., Taunton, MA 02780 equipment used in hazardous environments, nuclear
controls systems, or other mission-critical applications.
Ph: 1-800-823-8082 Fax: 508-823-8181
Industrial DIN Rail Mount
Switching Power Supplies
DRL Series

MECHANICAL DIMENSIONS

Outline Dimensions (inches)

Model L W H

AS-25 4.6 1.4 3.8

AS-40 5.8 1.5 3.8

AS-60 7.0 1.5 3.8

AS-100F 8.55 1.9 4.3

AS-150 8.55 1.9 4.3

AS-320 9.25 1.9 4.5

300 Myles Standish Blvd., Taunton, MA 02780


Ph: 1-800-823-8082 Fax: 508-823-8181

Potrebbero piacerti anche