Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
The centre line of the switch should be inclined 20mm down so that the switch moves about the horizontal centre line.
Centrifugal switch motion supplied pre-set to suit specific belt The main outputs of the
monitor speeds and conveyor frame encoder motion monitor are:
dimensions.
The Voith friction-driven belt motion The motion monitor is supplied in a n Low speed.
monitor is designed for conveyor dustproof, solid steel enclosure,
applications where sequence complete with terminal box and n High speed.
interlocking is desirable. Should any interconnecting cable for electrical n Inspeed.
fault cause the belt to slow or stop, connections. Two-pole, change-over,
the motion monitor will automatically snap action, silver-to-silver contacts n 0 - 10V DC or 4 - 20mA.
trip and thereby stop preceding belts are supplied as standard, but a
and prevent material build-up at the maximum of four-pole change-over n Pulsed output.
transfer point. contacts can be fitted. Current rating
600VAC make 8 Amp break 5 Amp. n Moving/stationary indication.
The Voith motion monitor comprises There are two 25 mm E.T. cable
a remarkably simple mounting entry points in the terminal box. n Forward/reverse detection.
arrangement whereby a friction wheel
contacts the underside of the belt to Key benefits
The Voith friction-driven motion monitor
impart rotary motion to the monitor. has been utilised for over 35 years in n Needs no maintenance - dust
conveying systems and is designed and hoseproof, lubricated for life.
This method completely eliminates and manufactured in South Africa.
complicated chain drives, couplings n Simply installed, complete with
and special mountings reducing Encoder Motion Monitor base plate - only four bolts
installation and maintenance costs. needed.
The motion monitor is supplied ready- The encoder motion monitor converts
mounted on its own frame for bolting mechanical rotational movements into n Made in South Africa.
directly on to conveyor stringers, is electrical impulses for the controlling
lubricated for life, and is tested prior and measuring of movement. It has n Adjustable for all belt speeds.
to dispatch. It is also available to suit been designed to respond to a wide n Flameproof.
a garland type conveyor system. range of speeds from 3 000 rpm or
12 metres per second down to 0
Speed variation over a specific range metres per second in either direction.
is achieved through a simple nut Encoder motion monitors are
adjustment. Settings outside this range assembled and adjusted to customers’
are effected by fitting friction wheels specific requirements.
of different diameters. Units are
1
Technical information
1 1
2 2
3 3
4 4
5 5
6 6
7
16
8
7 15
16
17 17
14
8 15
9 9
13
14
10 10
13
11 11
12 12
Technical diagrams of Centrifugal motion monitor (left) and Encoder motion monitor (right).
2
Details required when ordering
a centrifugal motion monitor
Voith Turbo / (Conveyor Belt Motion Monitor PDF. 002/2005) - Subject to change without notice as result of further technical development.
Belt inclination