Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
3 RCC M25
4 Reinforcement steel
9 Texture paint
11 Kerb stone
15
BOQ FOR APPROACH ROAD WORKS FOR CUSTOMER CORRIDOR
Item Description UOM Quantity Rate
Earth work in excavation by mechanical means (Hydraulic excavator) /
manual means over areas (exceeding 30cm in depth. 1.5 m in width as well
as 10 sqm on plan) including disposal of excavated earth, lead upto 50m
and lift upto 1.5m, disposed earth to be levelled and neatly dressed. cum 1,155.00 135.00
:- All kinds of soil
Providing and laying RMC M-25, conforming to specified grade (IS 456-
2000) at the levels given below using Grade 1 of IS 3812 Fly ash shall be
used 25 % of cementitious Material, river sand/manufactured sand with
20mm and down graded aggregate of granite basalt or trap, as per
specification excluding the cost of steel reinforcement and cost of form
work at all levels and places wherever needed including delivery, placing,
pumping by mechanical or manual means, compacting with vibrators
curing and hacking wherever necessary etc., complete as per drawing and Cum 5.00 6,250.00
specifications of the following items.The rate to include the providing and
applying of Nitobond/Skia Hi-Bond/equivalent epoxy agent for
construction joints.
Providing and laying Brick work with FPS bricks of class designation 75 in
foundation & superstructure with cement mortar 1:6 (1 cement:6 coarse
sand) including curing, joints finished flush/ raked to 12 mm depth etc.
complete as directed, cleaning and soaking the bricks at least for 24 hours cum 70.00 5,400.00
before use, curing for 7 days etc. all complete at all heights / depth.
Providing and fixing 20 mm thick paving with Sand plasted Kota stone
machine cut laid to required pattern over a bed of 20 mm thick cement
mortar 1:4 (1 cement: 4 coarse sand) including jointed with white cement
slurry mixed with pigment to match the shade of slab,as per specifications
, pattern and drawing including grinding, edge polishing, nosing, moulding, sqm 10.00 1,700.00
chamfering whereever required. Flamed / Honed Kota Stone 40thk.
Finishing walls with textured exterior paint of required shade :- New work
Two or more coats applied over and including priming coat of exterior
primer, scaffolding, all complete as per manufacturer specifications.
(including boundary wall qty.) Basic rate of Texture paint @ Rs. 25 per sqft. sqm 20.00 350.00
Supplying and filling in plinth with Jamuna sand under floors, including
watering, ramming, consolidating and dressing complete cum 315.00 1,500.00
Providing and fixing in position precast cement concrete Kerb Stones of
size 300 mm X 300 mm X 150 mm (projection 150mm) as approved by
Architect / Engineer-in-charge having the top exposed layer of 6 to 8 mm
thick cement mortar 1:2 (1 cement: 2 coarse sand) and rest in M20
cement concrete, fixed on beding of 100 mm thick 1:3:6 PCC increasing
haunching upto 75mm thk. as shown in the drawing over rammed earth
with jointing / pointing in cement mortar 1:3 (1 cement: 3 coarse sand) Rmt 65.00 725.00
finished neat as directed and cured including laying to curves as per plan
and drainage opening where required. Cost of concrete beding and
haunching included in item.
Providing & fixing chian link fencing 2400 mm high from road level with
vertical support 50x50mm square pipe x 14 gauges as pole fixed at the gap
of maximum 3 mtr center to centre around the area encased with
concrete base size of 230X230x600mm deep in the ground/wall with
welded M.S plate 8 mm at bottom. Grade of concrete shall be 1 : 1.5 : 3.
02 nos horizintal pipe of 50x50xmm square of 14 gauge shall be welded to
the bottom and top and for making the frame. Angle 25x25x3mm shall be
welded alround the frame to which chail link fencing (50x50x3mm GI Rmt 530.00 4,000.00
wire) shall be fixed with 25x3 mm flat alround with GI nut and bolts of
suitable sizes. Gate shall be providedin the fencing as per drawing. Work
also includes applying two or more coat of synthetic enamel paint over a
coat of red oxide primer.
Providing and laying RMC M-7.5 conforming to specified grade (IS 456-
2000) at the levels given below using Grade 1 of IS 3812 Fly ash shall be
used 25 % of cementitious Material, river sand/ manufactured sand with
20mm and down graded aggregate of granite basalt or trap, as per
specification excluding the cost of steel reinforcement and cost of form
work at all levels and places wherever needed including delivery, placing,
pumping by mechanical or manual means, compacting with vibrators
curing and hacking wherever necessary etc., complete as per drawing and cum 45.00 4,600.00
specifications of the following items.The rate to include the providing and
applying of Nitobond/Skia Hi-Bond/equivalent epoxy agent for
construction joints.
TOTAL
GST @ 18%
Labor Cess @ 1%
NET TOTAL
Amount
155,925.00
57,500.00
31,250.00
31,500.00
378,000.00
1,665,000.00
55,000.00
17,000.00
7,000.00
472,500.00
47,125.00
2,120,000.00
125
51,000.00
85,000.00
5,380,800.00
968,544.00
53,808.00
6,403,152.00