Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
APPLICATION NOTE
- 1-
Connecting the controller to PC
USB Device
Connector
USB A to B
Cable
Power Supply
Connection
PC USB
Connector
- 2-
The splash screen will come prior to
program execution.
From the Connection Manager screen select USB. Then click Connect.
USB selection
- 3-
Below screen will open.
- 4-
A warning box will open. Click “OK” to continue. This will stop normal operation of the unit
and forces it to “BOOT” mode.
Delete
“firmware.bin”
inside the “CRP
DSBLD” folder.
- 5-
Paste or drug &
drop the new
firmware file into
CRP DSBLD.
After uploading of new firmware file is finished, disconnect USB cable and power-off the unit,
then turn the power on again to resume normal operation.
- 6-