Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
2MXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-2690-
65/65/65/65/33/33-15.5i/15.5i/17.5i/17.5i/18.5i/18.5i-M/M/M/M/M/M-R
EasyRET Hybrid Octa-beam Antenna with Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) 2 x (1427 - 2690)
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960 1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45° +45° , -45°
2 - 12, continuously adjustable , each band
Electrical downtilt (°) 2 - 12 , continuously adjustable , each band separately
separately
at mid Tilt 14.7 15.0 15.1 15.2 14.9 16.2 16.7 16.9 16.7
Gain (dBi)
over all Tilts 14.5 ±0.5 14.8 ±0.4 14.9 ±0.4 15.0 ±0.5 14.7 ±0.5 16.1 ±0.7 16.5 ±0.5 16.7 ±0.6 16.5 ±0.8
Side lobe suppression for first side
> 16 > 16 > 16 > 16 > 17 > 17 > 17 > 17 > 17
lobe above main beam (dB)
Horizontal 3dB beam width (°) 72 ±7 71 ±7 70 ±7 69 ±6 71 ±5 62 ±4 61 ±3 60 ±5 59 ±5
Vertical 3dB beam width (°) 11.0 ±0.9 10.0 ±0.7 9.7 ±0.6 9.1 ±0.5 11.3 ±0.8 9.2 ±0.7 8.3 ±0.6 7.3 ±0.5 6.9 ±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 25
Interband isolation (dB) ≥ 25 ≥ 28
Front to back ratio total, ±30° (dB) > 21 > 22 > 22 > 22 > 21 > 22 > 22 > 22 > 22
Cross polar ratio at boresight (dB) > 18 > 18 > 18 > 18 > 18 > 18 > 18 > 16 > 18
Max. power per input (W) 400 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
Electrical Properties
2 x (1695 - 2690)
Frequency range (MHz)
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable , each band separately
at mid Tilt 17.3 18.0 18.5 18.2
Gain (dBi)
over all Tilts 17.1 ±0.8 17.8 ±0.8 18.3 ±0.8 18.0 ±0.8
Side lobe suppression for first side
> 16 > 16 > 16 > 15
lobe above main beam (dB)
Horizontal 3dB beam width (°) 36 ±4 32 ±3 31 ±2 30 ±2
Vertical 3dB beam width (°) 9.9 ±0.8 9.1 ±0.7 7.8 ±0.5 7.2 ±0.5
VSWR < 1.5
Horizontal beam centers (°) ±30 ±28 ±27 ±24
Cross polar isolation (dB) ≥ 25
Beam to Beam isolation (dB) ≥ 18
Interband isolation (dB) ≥ 28
Front to back ratio total, ±30° (dB) > 25 > 26 > 28 > 28
Cross polar ratio at boresight (dB) > 15 > 15 > 16 > 15
Max. power per input (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
106
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2009 x 499 x 206
Packing dimensions (H x W x D) (mm) 2360 x 550 x 245
Antenna weight (kg) 46.8
Clamps weight (kg) 5.8 (2 units)
Antenna packing weight (kg) 61.5 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
2009
1420
Radome colour Light grey
Operational temperature (℃) -40 .. +65
Frontal: 730 (at 150 km/h)
Wind load (N) Lateral: 380 (at 150 km/h)
Maximum: 955 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 16 x 4.3-10 Female
Connector position Bottom
Accessories
Item Model Description Weight Units per antenna
HWNxxx……….y2
HWNxxx…….....y1
y6 y2 y4
HWNxxx……......r1
HWNxxx……….y6
h
HWNxxx………..r2 y5 y1 y3
g
HWNxxx……….y3
r1 r2
g HWNxxx…….....y4
h HWNxxx………..y5
r - Red y - Yellow
L - Left array R - Right array B - Bottom array T - Top array
2
AMB4519R18v06
2MXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-2690-
65/65/65/65/33/33-15.5i/15.5i/17.5i/17.5i/18.5i/18.5i-M/M/M/M/M/M-R
EasyRET Hybrid Octa-beam Antenna with Integrated RCUs - 2.0m
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching
function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
3
AMB4519R18v06
2MXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-2690-
65/65/65/65/33/33-15.5i/15.5i/17.5i/17.5i/18.5i/18.5i-M/M/M/M/M/M-R
EasyRET Hybrid Octa-beam Antenna with Integrated RCUs - 2.0m
NOTE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to
requirements described in the antenna installation guide.
Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
Any previous datasheet issues become invalid. 4 Issue: 2019-09-26