Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Di iculty: Intermediate
If you can build a bench, you can build this storage bed. It's simply three benches! Optional drawers can add
functionality. Features six oversized cubbies, no box spring is required. Our step by step plans are easy to follow
and include a full shopping list and cut list.
https://www.ana-white.com/woodworking-projects/classic-storage-bed-king 1/15
7/18/2020 Classic Storage Bed (King) | Ana White
Dimensions
Standard king dimensions, sized for mattress 76" wide x 80" long
Preparation
SHOPPING LIST
2 - sheets of 3/4" thick cabinet grade plywood, you can also use MDF or AC plywood for
painted finishes
1 - 4x8 sheet of 1/4" thick plywood
5 - 1x2 @ 8 feet long
3 - 1x4 @ 8 feet long
*For a stained finish, cabinet grade plywood is recommended. For a painted finish you can use
MDF (not fun to work with but inexpensive) or AC Plywood (will need more sanding but also less
expensive)
COMMON MATERIALS
CUT LIST
https://www.ana-white.com/woodworking-projects/classic-storage-bed-king 3/15
7/18/2020 Classic Storage Bed (King) | Ana White
OPTIONAL DRAWERS FOR KING END BENCH - measure and cut drawers to fit openings and
drawer slides
4 - 1x4 @ 18"
4 - 1x6 @ 18"
4 - 1x6 @ 32-7/8"
2 - 1/4" plywood @ 34-3/8" x 18"
2 - 1x12 @ ~35-1/2"
OPTIONAL DRAWERS FOR QUEEN SIDE BENCHES - measure and cut to fit openings and drawer
slides
8 - 1x4 @ 18"
8 - 1x6 @ 18"
8 - 1x6 @ 24-7/8"
4 - 1/4" plywood @ 36-3/8" x 18"
CUTTING INSTRUCTIONS
For the trim and face frame pieces, a compound miter saw is recommended for nice cuts.
TOOLS
https://www.ana-white.com/woodworking-projects/classic-storage-bed-king 4/15
7/18/2020 Classic Storage Bed (King) | Ana White
https://www.ana-white.com/woodworking-projects/classic-storage-bed-king 5/15
7/18/2020 Classic Storage Bed (King) | Ana White
Instructions
STEP 1
(https://www.ana-white.com/sites/default/files/2019-
08/king%20diy%20storage%20bed%20easy%20to%20build%20pottery%20barn%20stratton%20di erences.jpg)
This bed is made up of three benches.
The two side benches are identical to the queen bed. Follow the instructions in the queen bed
(https://www.ana-white.com/woodworking-projects/classic-storage-bed-queen) to build two side
benches. Add the cleats for the mattress slats to the backs of the side benches.
The end bench for the king only di ers in overall length from the queen. The steps are listed below for
your convenience.
https://www.ana-white.com/woodworking-projects/classic-storage-bed-king 6/15
7/18/2020 Classic Storage Bed (King) | Ana White
STEP 2
(https://www.ana-white.com/sites/default/files/2019-
08/king%20diy%20storage%20bed%20easy%20to%20build%20pottery%20barn%20stratton%20step%201.jpg)
Build the end bench with 3/4" pocket holes and 1-1/4" pocket hole screws. Three screws per joint is
su icient.
https://www.ana-white.com/woodworking-projects/classic-storage-bed-king 7/15
7/18/2020 Classic Storage Bed (King) | Ana White
STEP 3
(https://www.ana-white.com/sites/default/files/2019-
08/king%20diy%20storage%20bed%20easy%20to%20build%20pottery%20barn%20stratton%20step%202.jpg)
Attach back with 3/4" brad nails and glue.
https://www.ana-white.com/woodworking-projects/classic-storage-bed-king 8/15
7/18/2020 Classic Storage Bed (King) | Ana White
STEP 4
(https://www.ana-white.com/sites/default/files/2019-
08/king%20diy%20storage%20bed%20easy%20to%20build%20pottery%20barn%20stratton%20step%203.jpg)
Build the face frame first with 3/4" pocket holes and 1-1/4" pocket hole screws.
Nail completed face frame to front of bench with 1-1/4" brad nails.
https://www.ana-white.com/woodworking-projects/classic-storage-bed-king 9/15
7/18/2020 Classic Storage Bed (King) | Ana White
STEP 5
(https://www.ana-white.com/sites/default/files/2019-
08/king%20diy%20storage%20bed%20easy%20to%20build%20pottery%20barn%20stratton%20step%204.jpg)
Build the end bench trim face frame first with 3/4" pocket holes and 1-1/4" pocket hole screws.
https://www.ana-white.com/woodworking-projects/classic-storage-bed-king 10/15
7/18/2020 Classic Storage Bed (King) | Ana White
STEP 6
(https://www.ana-white.com/sites/default/files/2019-
08/king%20diy%20storage%20bed%20easy%20to%20build%20pottery%20barn%20stratton%20step%205.jpg)
Assemble the three benches in the room. You can screw benches together if necessary.
Cut scrap plywood pieces to fit in cavity and screw to slats on backs of side benches.
https://www.ana-white.com/woodworking-projects/classic-storage-bed-king 11/15
7/18/2020 Classic Storage Bed (King) | Ana White
STEP 7
(https://www.ana-white.com/sites/default/files/2019-
08/king%20diy%20storage%20bed%20easy%20to%20build%20pottery%20barn%20stratton%20step%206.jpg)
OPTIONAL DRAWERS:
Attach drawer slides to the 1x4, with front edge of drawer slide cabinet member flush with front edge of
1x4.
The holes in the center of the drawer slide should line up with your pencil mark, 1" up from bottom edge
of 1x4 - so you know your slides are being installed level.
Set the 1x4s inside the cubbies and nail to the sides of the cubbies with 1-1/4" brad nails. The front edge
should be lined up with the front edge of your plywood carcasses.
https://www.ana-white.com/woodworking-projects/classic-storage-bed-king 12/15
7/18/2020 Classic Storage Bed (King) | Ana White
STEP 8
(https://www.ana-white.com/sites/default/files/2019-
08/king%20diy%20storage%20bed%20easy%20to%20build%20pottery%20barn%20stratton%20step%207.jpg)
Build drawer boxes to fit drawer slide width. Measure the distance between the 1x4s, subtract the drawer
slide clearances (usually 1" for 1/2" on each drawer slide) and build drawers to this size.
If your opening is true - 35-3/8" - AND your drawer slides require 1/2" clearance (1" overall) AND your
drawer box material is 3/4" thick, you can follow the dimensions shown.
https://www.ana-white.com/woodworking-projects/classic-storage-bed-king 13/15
7/18/2020 Classic Storage Bed (King) | Ana White
STEP 9
(https://www.ana-white.com/sites/default/files/2019-
08/king%20diy%20storage%20bed%20easy%20to%20build%20pottery%20barn%20stratton%20step%208.jpg)
Install drawers into the slides.
Cut 1x12 faces and adjust to fit. You may need to sand down edges for a perfect fit, or cut drawer faces
down with a table saw. There should be an even gap around all edges, about 1/8" on all sides.
https://www.ana-white.com/woodworking-projects/classic-storage-bed-king 14/15
7/18/2020 Classic Storage Bed (King) | Ana White
We apologize if there was an error in this plan. Please help us out and report any errors here.
https://www.ana-white.com/woodworking-projects/classic-storage-bed-king 15/15