Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
CHENNAI
PLANT: 2.3 MLD WATER TREATMENT PLANT
TITLE: BILL OF QUANTITIES FOR CIVIL WORKS FOR WTP
Final Rate
Sr.No. Description m.u. from Hirco Quantity Amount
Chennai site
1. Excavation for foundations in trenches, areas etc. in all types of soils, sand,
gravel, murum and soft rock, except for hard rock, including dewatering,
shoring, strutting preparing, trimming and levelling the bed for foundations,
refilling around foundations with selected approved materials, consolidating
with watering and stacking/carting away and/or spreading the surplus earth
within the site as directed ( rate shall include removal of
grass/vegetation/bushes etc.
2. Same as in item 2 above but for excavation in hard rock (trap, basalt,
granite) necessitating chiselling / wagon drilling etc. Other than blasting.
3. Filling in plinth, under floors and similar situations with approved material
(murrum)obtained from excavation in layers not exceeding 15 cm. thick,
watering, consolidating each layer adequately using 8-10 T power roller /
heavy duty plate compactor so as to obtain 95% of maximum dry density ( m3 75 300 22,500
as per Standard Proctor Test ) including finishing to the required levels etc.
complete as directed.
4 23 cm. thick dry rubble packing under floor and similar situations with rubble
obtained from excavation, hand set in regular lines, levels, interstices filled
with smaller stones of appropriate size, with stone dust blinding consolidated
and finished to the required levels including providing and laying 100 micron
m2 150 50 7,500
PVC sheet (Building paper), (as per Technical Specification of Tender)
brought by the contractor at his cost etc. as directed.
5 Same as in Item 4 above but with material brought by the contractor at his
m2 350 3200 1,120,000
cost from outside.
2. Providing & laying in position machine mixed plain cement concrete in grade
M10, but having volumetric proportion of 1:3:6 ( cement : sand : coarse
aggregate ) with 37mm and down graded aggregate as coarse aggregate
: of specified thickness and drawings, complete in all respects including
mixing, putting in place vibrating,tamping, watering/curing, lateral m3 2950 240 708,000
formworks, grooves, finishing the top surface either smooth or rough at all
heights and levels and including below all types of foundations e,g,
footings, rafts, walls & as specified etc. complete.
4. Providing & laying in position machine mixed R C C of grade M15, but having
volumetric proportion of 1:2:4 ( cement : sand : coarse aggregate ) with
20mm and down graded aggregate as coarse aggregate : as per
specifications and drawings, complete in all respects including mixing,
putting in place vibrating,tamping, watering/curing, leaving pockets, recess,
grooves, finishing the top surface of slab and beams either smooth or
rough in following items at all heights and levels and as specified etc.
complete. (Note : Only reinforcment will be paid seperately )
Below Plinth :
Above Plinth :
q) Staircase and steps, including cantilever slabs with or without waist slab,
m3 3,800 35 133,000
folder slabs etc.
4. Extra over & above M15 grade concrete for M20 grade concrete, but
having volumetric proportion of 1:1 1/2:3 ( cement : sand : coarse aggregate m3 650 10 6,500
)
5. Extra over & above M15 grade concrete for M25 grade concrete, but
having volumetric proportion of 1:1:2 ( cement : sand : coarse aggregate ) m3 850 1,556 1,322,600
6. Providing & fixing M S round holding down ( foundation ) bolts with nuts,
washers, plates etc. complete and as per drawings & details.
a) 16mm dia bolts and 600mm long No 120 20 2,400
8. Cutting holes in concrete/ masonry required for services (if not provided
earlier during casting) Thickness not exceeding 35 cm including making good
the same later).
10. Breaking existing concrete/ brickwork and disposing off materials to any lead
as directed.
11. P & F readymade fan hooks with M.S. box and bar embedded in concrete,
No. 200 5 1,000
black enamel paint etc. complete.
12. Grouting with 1:1:2 concrete using smaller size of aggregates for grouting
m3 8000 5 40,000
base plates of machines/equipments inside PCC/RCC member.
13. Providing and grouting 50mm thick grout below base plates in cement
mortar 1:2 including ramming ,watering etc. complete. m2 120 5 600
14. Providing & filling approved quality sand inside / around equipment
foundations. m3 1050 150 157,500
1 Providing and fixing general light weight structural steel work at all locations
like edge protection angles, safety railings ladders, catwalks, framework to
openings, chequered plate flooring and covers using standard rolled M.S.
sections (channels, angles, tees, flats, plates, etc.), M.S. pipes as called for,
fabricated as per drawings hoisted and fixed in position including all cutting,
drilling, welding, grinding, other operations, bolts and nuts, templates,
MT 64,000 2 96,000
temporary supports, all incidentals and one coat of red oxide primer, 2 coats
synethetic enamel paint after preparation of surface etc. complete. Work at
all levels and locations. Rate shall be based on issue rate of structural steel.
1. First class brick masonry 23 cm. thick and above in plinth in CM1:5 for walls,
ducts, drains, etc. including raking out joints to receive plaster, watering etc. m3 3200 20 64,000
complete.
2. First class brick masonry 23 cm. thick PPW & above in superstructure in CM 1:5
at all levels, raking out joints to receive plaster, watering etc. complete.
m3 3300 180 594,000
3. First class brick masonry 12 cm. thick (half brick thickness) set in C M 1:4 at all
levels with one strip of hoop iron 25 mm x 1.6 mm (16 gauge) or 2 - Y8 placed
at every fifth course, raking out joints to receive plaster, watering etc. m2 450 50 22,500
complete.
5. Internal cement plaster 12-15 mm. thick in CM 1:4 on walls ceiling soffit
(brick/concrete/rubble) including neeru finished smooth with wood or steel.
And providing grooves, bands, drip mould in plaster (wherever directed), m2 240 2,600 624,000
scaffolding, watering, chicken wiremesh at junction of dissimilar material etc.
complete.
-
6. Sand faced plaster laid in two coats (1:4) 20 mm. thick on walls
(brick/cone/rubble) including providing grooves, bands, drip moulds, in
pattern separated by smooth finished bands, scaffolding, watering etc. and
m2 160 1,020 163,200
chicken wire mesh at junctions of dissimilar material etc. complete (but
excluding waterproofing compound).
-
7. Same as above but with integral waterproofing compound. m2 210 2,600 546,000
Final Rate
Sr.No. Description m.u. from Hirco Quantity Amount
Chennai site
-
8. Providing raised / sunken pointing in CM (1:3) for rubble masonry with . m2 150 160 24,000
-
9. Providing and applying first quality paint as per manufacturers and/or
Consultants’ Technical Specifications in required shade and colour: -
-
a) Primer plus two coats of Acrylic Emulsion paint to walls, ceilings and similar
m2 120 200 24,000
situation .
-
a) Primer plus two coats of Anti-fungal (AF) paint to wall, ceiling and similar
situation m2 100 1,020 102,000
-
b) 3 coats of white or colour lime wash to wall, ceiling and similar situation etc.
complete. m2 12 1,330 15,960
-
c) Primer (Zinc Chromium) plus two coats of Synthetic Enamel paint (matt or
glossy) to metal and wood works (each coat 35 micron DFT). m2 75 100 7,500
-
d) Same as (d) above, but with Ordinary Red Oxide / similar primer. m2 40 100 4,000
-
10 Providing PVC pipe, pipe sleeves in masonry / RCC as weep holes, etc. -
-
- 50 mm dia. RM 100 6 600
-
- 75 mm dia. RM 150 6 900
-
- 100 mm dia. RM 250 6 1,500
-
- 150 mm dia. RM 400 6 2,400
1. Supplying and laying hand cut stone for flooring square or rectangular in
shape of upto 600 mm. wide, in plain/diamond pattern at all positions in
proper line, level and slope, including bedding of CM 1:4 cement floating of
joints, pigment filling, polishing, curing, acid cleaning etc. complete and as
directed.
a) D.P. kotah stone (600 x 600) 25 to 28 mm. thick. m2 675 360 243,000
2. Providing and laying 40 mm. thick granolithic floor (IPS) with 1:1.5:3 cement
concrete laid to proper level and slope in chess board pattern including
compaction, filling joints, finishing smooth with extra cement, watering etc. m2 160 180 28,800
complete and as directed.
3. SKIRTING
Providing and laying 150 mm. high, following approved recessed or as
specified skirting including CM 1:4 backing/bedding, in line and level,
polishing, curing, acid cleaning etc. complete or as directed:
a) D.P. Kotah 600 wide, 8-10mm thick to match the floor joints. m2 800 80 64,000
b) Rough kotah 600 wide, 8-10mm thich to match the floor joints. m2 700 20 14,000
5. Providing and supplying following stones for staircase treads (1500 mm.
length), landing and similar situation (internal/external) including CM 1:4
backing/bedding, cement floats, filling of joints with plain/colour cement
slurry, curing, polishing, cleaning etc. complete and as directed:
Final Rate
Sr.No. Description m.u. from Hirco Quantity Amount
Chennai site
a) D.P. Kotah stone treads (25 mm. thick) with grooves near edges and
m2 900 90 81,000
landings.
c) Rough kotah stone treads (25 mm. thick) with pencil rounding at the edges
m2 800 10 8,000
and landing.
6. Same as above but for single piece window sill 20mm thick with pencil
rounding at the edges:
7. Providing and fixing approximately 600 mm. wide Jet black granite laboratory
platform including chasing along wall (CM 1:4), curing, cleaning etc.
complete and as directed. (Brick masonry wall supports, plaster to wall, m2 3,000 15 45,000
skirting, dado etc. will be paid separately).
DOORS
1. Providing and fixing first class CPTW door frames 125 mm. x 75 mm. and single
/ double shutters flush door (38 mm. thick) inclusive of 25 mm x 6 mm x 230
mm. long M.S. holdfasts, heavy duty brass oxidised fitting such as 150 mm.
butt railway type hinges, tubular lock, concealed type door closer, stoppers,
other miscellaneous hardware, grouting, filling around frames, one coat of
primer and two coats of Synthetic Enamel water cut (matt finish) paints on
both sides, cleaning etc. complete as per drawings.
WINDOW
3. Providing and fixing black coloured powder coated (polyester epoxy of M/S
GOODLASS) aluminium windows and ventilators using 44mm x 44mm x 2mm
aluminium box section and shutter with 60 x 44x 2mm aluminium box section with
necessary fixtures such as couplings, handles, glazing clips, peg stays, locking and
all other fixtures and fastening conforming to IS:1948 including fixing 5.5mm thick
clear glass (M/s Float Glass or M/s Modi) etc. complete (equivalent to Jupiter
windows series no. 120).
(Minimum thickness of powder coating shall be 50 microns. Rates to include
providing aluminium subframe).
a) window size (approx.) 2000 mm. x 1250 mm. No. 22,000 2 44,000
b) window size (approx.) 1200 mm. x 1000 mm. No. 17,500 26 455,000
c) Lowered window size (approx.) 1500 mm. x 750 mm. No. 17,500 16 280,000
G. WATERPROOFING
Final Rate
Sr.No. Description m.u. from Hirco Quantity Amount
Chennai site
1. Cement based waterproofing treatment over terrace, roof, etc. including min.
75 mm. thick and average 120 mm thick brickbat coba in waterproof cement
mortar, laid to desired line, level and slope finished smooth with trowel with
final layer of 40 mm. thick jointless waterproof cement plaster in cement m2 400 1,600 640,000
colour having false square lines at 30 cm. C/C. on top. The junction between
parapet and other walls with slab shall have round wata(coving) with the
treatment carried over to 30 cm. on parapet wall after wata. Wall plaster to
H MISCELLANEOUS ITEMS
2. Providing and fixing rain water down take PVC pipes including screwing,
clamping, sealing joints, testing, etc. complete.
I. ROAD PAVEMENT
2. Providing and laying Wet Mix Macadam with paver finisher in specified
thickness, each layer not exceeding 200 mm compacted thickness including
premixing in pugmill/plant well graded crushed stone aggregate, with
watering and spreading by to required profile and compacting with vibratory Cum 1,490 285 424,650
roller having minimum 80-100 KN static weight to achieve desired density of
98% of MDD including all material , labour, machinery with all leads and lifts
etc. complete.
2 Supplying, installing and testing approved make full way lever operated GM
ball valves conforming to IS 1703 with unions etc., complete.
a) 20 mm dia Nos 375 2 750
Final Rate
Sr.No. Description m.u. from Hirco Quantity Amount
Chennai site
3 Supplying and installing pre-cast P.C.C support blocks of M15 concrete mix of
sizes as given below for pipe supports on the terrace complete.
a) 150 mm x 150 mm x 150 mm Nos 200 10 2,000
6 Supplying and fixing in position approved make GM 'Y' strainer with necessary
fittings etc., complete. (For Terrace loop).
a) 25 mm dia Nos. 3500 1 3,500
1 Supplying, installing, testing and commissioning, laying to line and levels UPVC
pipes agricultural grade 6 kgf / sq cm conforming to IS 4985 - 2000 jointing
with solvent cement jointing and testing with setting the pipes in cement
concrete M 15 as per specifications for building drainage.
a) 110 mm n.b Rmt 300 25 7,500
b) 160 mm n.b Rmt 350 85 29,750
2 Providing and fixing round mouthed PVC bottle gully trap with 300 mm x 300
mm CI grating at top including embedding the trap in cement concrete M15
construction of brick masonry chamber internal clear size 300 mm x 300 mm
in brick masonry 250 mm thick in cement sand mortar 1:4 over M15 cement
concrete bid 150 mm thick, plastering inside outside and all exposed surfaces
Nos. 1,500 1 1,500
with 1:3 cement sand plaster 15 mm thick providing and fixing CI frame and
cover size 300 mm x 300 mm weighing together not less than 7.8 kgms
painting all CI items with 3 coats of approved bituminastic paint etc.,
complete.
3 Supplying, installing, testing and commissioning, laying to line and levels salt
glazed stoneware pipes best quality conforming to IS 4127 - 1983 jointing with
cement testing the pipes and fittings complete with all accessories required
(for last manhole to main drainage on road.
a) 150 mm n.b Rmt 250 10 2,500
L. SANITARY FIXTURES
4 Supplying, fixing CP toilet paper holder fixed with SS screws complete. Nos 425.00 2.00 850
CP Fittings :Jaquar
6 Supplying, fixing CP twin robe / coat hook fixed with SS screws on to the toilet
Nos 250.00 2.00 500
door.
CP Fittings :Jaquar
Final Rate
Sr.No. Description m.u. from Hirco Quantity Amount
Chennai site
8 Supplying, installing, testing and commissioning sink with single bowl and
single drain board manufactured from 8 mm thick stainless steel, 18 G high
grade indestructable chrome nickel steel with top quality polish, 1 no. 40 mm
dia CP waste coupling, with 1 no. 40 mm dia CP bottle trap with extension Nos 7,500.00 1.00 7,500
pipe, 15 mm dia CP sink cock with swivel spout wall mounted type and
necessary wall flanges etc., complete. Size of sink : 1000 mm x 500 mm
CP Fittings :Jaquar
10 Supplying and fixing CP soap dish of approved make with necessary fixing
Nos 300.00 3.00 900
materials etc., complete.
11 Supplying and fixing CP 20 mm dia 600 mm long towel rod with necessary
Nos 750.00 3.00 2,250
screws, CP end clamps etc., complete.
CP Fittings :Jaquar
Total : “L” (1 to 11) 55,500
Cost estimate as
Sr. No. Description Amount
per site rate
Detail design
25
Tender
Techno commerical
evaluation
Coordination for work
completion
Total = 100%
TOTAL SCORE