Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
MASTERPREN BG
Synthetic membrane of plasticised PVC
Storage
Store out of direct sunlight, clear of the ground
and on pallets.
®
MASTERPREN BG
*Physical / Chemical Properties
Thickness UNI EN 1849 - 2 1.5mm (± 5%) 2.0mm (± 5%) 2.2mm (± 5%) 3.0mm (± 5%)
Specific weight UNI EN 1849 - 2 1.950 kg/m2 (± 5%) 2.600 kg/m2 (± 5%) 2.860 kg/m2 (± 5%) 3.900 kg/m2 (± 5%)
Ultimate Tensile strength UNI EN ISO 527–3
Transverse >14 N/mm² >14 N/mm² >14 N/mm² >14 N/mm²
Machine direction >15 N/mm² >15 N/mm² >15 N/mm² >15 N/mm²
Elongation UNI EN ISO 527 – 3
Transverse 280% 280% 280% 280%
Machine direction 280% 280% 280% 280%
Dynamic puncture resistance DIN 16726- > 1000 mm > 1100 mm > 1200 mm > 1800 mm
5.12
Cold bending UNI EN 495 - 5 < -25°C < -25°C < -25°C < -25°C
Hydrostatic pressure resistance Waterproof Waterproof Waterproof Waterproof
(6 hours at 5 bar) UNI EN 1928 meth. B
Tear resistance ISO 34 Specimen Fig 2 > 45 N/mm > 45 N/mm > 45 N/mm > 45 N/mm
Resistance to static punching (CBR)
UNI EN ISO 12236 > 1700 N > 2200 N > 2300 N > 3400 N
Resistance to oxidation UNI EN 14575
Tensile strength variation < 25% < 25% < 25% < 25%
Root resistance CEN TS 144416 No penetration No penetration No penetration No penetration
MASTERPREN BG/F fleece backed PVC membrane (fleece backing 200gm/m² or 300gm/m²) is also available for adhered
applications.
BASF_CC-UAE/Mp__BG_10_07/v1/12_13
The technical information and application advice given in this BASF publication are based on the present state of
STATEMENT OF our best scientific and practical knowledge. As the information herein is of a general nature, no assumption can be
RESPONSIBILITY made as to a product's suitability for a particular use or application and no warranty as to its accuracy, reliability or
completeness either expressed or implied is given other than those required by law. The user is responsible for
checking the suitability of products for their intended use.
Field service where provided does not constitute supervisory responsibility. Suggestions made by
NOTE BASF either orally or in writing may be followed, modified or rejected by the owner, engineer or contractor since
they, and not BASF, are responsible for carrying out procedures appropriate to a specific application.