0 valutazioniIl 0% ha trovato utile questo documento (0 voti)
84 visualizzazioni2 pagine
The document discusses the selection and sizing of ball and roller bearings for various applications involving radial and axial loads at different speeds and operating conditions. It includes problems involving calculating dynamic load ratings, selecting bearings based on load and life requirements, and defining key bearing terminology.
The document discusses the selection and sizing of ball and roller bearings for various applications involving radial and axial loads at different speeds and operating conditions. It includes problems involving calculating dynamic load ratings, selecting bearings based on load and life requirements, and defining key bearing terminology.
The document discusses the selection and sizing of ball and roller bearings for various applications involving radial and axial loads at different speeds and operating conditions. It includes problems involving calculating dynamic load ratings, selecting bearings based on load and life requirements, and defining key bearing terminology.
1. The ball bearings are to be selected for an application in which the radial load is 2500 N during 90 % of the time and 7000 N during 10 %.The shaft is to rotate at 150 rpm. Determine the minimum value of the basic dynamic load rating for 5000 hours of operation with not more than 10% failures.[2017-18] 2. A shaft rotating at constant speed is subjected to variable load. The bearings supporting the shaft are subjected to stationary equivalent radial load of 3 kN for 10 per cent of time, 2 KN for 20 per cent of time, 1 kN for 30 per cent of time and no load for remaining time of cycle. If the total life expected for the beating is 20 x 106 revolutions at 95 per cent reliability, calculate dynamic load rating of the ball bearing.[2016-17,2014-15] 3. Select a single row deep groove ball bearing for a radial load of 4000 N and an axial load of 5000 N, operating at speed of 1600 rpm. for an average life of 5 years at 10 hours per day. Assume uniform & steady load.[2014-15] 4. Select a single row deep groove ball bearing for a radial load of 4500 N and an axial load of 5500 N, operating at speed of 1500 rpm. for an average life of 5 years running for 12 hours per day.[2013-14] 5. Select a suitable roller bearing to carry a radial load of 25,000 N. The shaft rotates at 1500 rpm, average life is 4000 hours. Inner race rotates. Take mild shock.[2013- 14] 6. For a single row deep groove ball bearing, dynamic load carrying capacity of the bearing is 5590 N and static load carrying capacity , of the bearing g is 2500 N. Axial and radial load on the bearing are 625 N and 1250 N respectively. Determine the equivalent load and life of ball bearing if (i) inner race is rotating and (ii) outer race is rotating.[2012-13] 7. A system is using 3 identical ball bearings,each subjected to 3kN radial load .Reliability of the system that is 1 out of 3 bearings failure during the life time of 6 million cycles is 83 %.Determine the dynamic load carrying capacity of the bearing with 90 % reliability.[2012-13] 8. A deep groove ball bearing has dynamic capacity of 20000 N and is to operate on the following work cycle: radial load of 6000 N at 200 rpm for 25% time, radial load of 9000 N at 500 rpm for 20 % of the time and radial load of 3500 N at 400 rpm for the remaining period .Assuming the loads are steady and the inner race rotates, find the average expected life of the bearings in hours.[2011-12] 9. Select a suitable bearing for a 40 mm shaft that has to operate 8 hours per day, 5 days per week for 5 years and is to carry a stationary radial load 2500 N at 1500 rpm. The use involves minor shock and inner ring is rotating.[2011-12]
10. Define the following terms as applied to rolling contact bearings:
(i) Basic static load rating (ii) (ii) Static equivalent load (iii) (iii) Rated life (iv) (iv) Average life (v) Basic dynamic load rating (vi) Dynamic equivalent load.