Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
GENERAL NOTES:
1) Refer Specification for Pipe Support standard P7531-TS-2300-P-0011
2) Primary and Secondary supports associated with spring support to be verified with respect to actual vendor drawing before fabrication/erection.
3) Spring supports, Sliding plates, Rigid struts etc. Tagged items are not included in standard support schedule.
4) Civil insert plates, Special pipe supports are not included in standard support schedule.
5) Temporary supports and shims required during construction, test purpose etc. are excluded from this MTO and same shall be estimated by SUBCONTRACTOR.
7) This Pipe Support schedule provides Support Illustration (Support Tag) only. SUBCONTRACTOR to estimate the detailed MTO based on the bill of material provided on Support Specification for each Support illustration code.
8) SUBCONTRACTOR to consider all Bill of material for pipe supports EXCEPT Tagged items such as Springs, Rigid Struts, Sliding Plates and Pipes for Wear / Reinforcement Pad and Encircled Pads which are free issued by CONTRACTOR.
9) SUBCONTRACTOR to consider additional allowances required for cutting and fabrication while estimating the Bill of Material
10) SUBCONTRACTOR to provide Detailed Pipe MTO required for Support Wear / Reinforcement pad and Encircled pads based on the detailed estimation.
11) Deleted.
12) Small bore brace supports will be included in the next revision.
13) For GRE pipe supports, dimensions are measured Internal diameter of pipe. SUBCONTRACTOR to verify the pipe wall thickness with CONTRACTOR prior to fabrication if isometrics are not available at the time of fabrication. The thickness will be provided based on Surge and Stress analysis recommendation
(rev A3) 14) For GRE pipe supports, GRP Pipe Support standard P7531-RM-2300-P-0014-E99-0021
Page 2 of 36
ZAKUM DEVELOPMENT COMPANY (ZADCO)
UPPER ZAKUM 750K P-7531
ENGINEERING, PROCUREMENT, CONSTRUCTION & COMMISSIONING WORK FOR SULFATE REDUCTION PLANT ON WEST ISLAND (EPC3)
CONTRACT NO. CT750 UZ140110
SL.NO. SPLIT WBS MODULE ISOMETRIC NUMBER SUPPORT ILLUSTRATION SUPPORT DESCRIPTION SUPPORT TYPE SUPPORT NOTE PIPING CLASS PIPE SIZE SupportLoc E(m) SupportLoc N (m) SupportLoc_EL (m) IFC Status REMARKS Weight Unique number FLUID CODE SEQUENCE LINE NO PAINT SYSTEM RELEASE STATUS REV NO RELEASE PREPARED PIPE
NUMBER DATE BY MATERIAL
32 2370-09A 2370-09A-SW-40057-1 SG1-16 GUIDE ON PIPE SHOE SG1-TYPE-3 GUIDE GAP=0mm D1G 16" Approved PRIMARY SUPPORT UZASSY_PY_SG1_16IN-01-211 SW 40057 SW-40057-D1G NA
441 2370-09A 2370-09A-SW-40076-1 SG1-16 GUIDE ON PIPE SHOE SG1-TYPE-3 GUIDE GAP=0mm D1G 16" Approved PRIMARY SUPPORT UZASSY_PY_SG1_16IN-01-221 SW 40076 SW-40076-D1G NA
472 2370-09A 2370-09A-SW-40055-1 SG1-16 GUIDE ON PIPE SHOE SG1-TYPE-3 GUIDE GAP=0mm D1G 16" Approved PRIMARY SUPPORT UZASSY_PY_SG1_16IN-01-201 SW 40055 SW-40055-D1G NA
546 2370-09A 2370-09A-SW-40076-1 SG1-16 GUIDE ON PIPE SHOE SG1-TYPE-3 D1G 16" Approved PRIMARY SUPPORT UZASSY_PY_SG1_16IN-01-222 SW 40076 SW-40076-D1G NA
592 2370-09A 2370-09A-SW-40072-1 SG1-16 GUIDE ON PIPE SHOE SG1-TYPE-3 D1G 16" Approved PRIMARY SUPPORT UZASSY_PY_SG1_16IN-01-224 SW 40072 SW-40072-D1G NA
644 2370-09A 2370-09A-SW-40057-1 SG1-16 GUIDE ON PIPE SHOE SG1-TYPE-3 D1G 16" Approved PRIMARY SUPPORT UZASSY_PY_SG1_16IN-01-212 SW 40057 SW-40057-D1G NA
655 2370-09A 2370-09A-SW-40055-1 SG1-16 GUIDE ON PIPE SHOE SG1-TYPE-3 D1G 16" Approved PRIMARY SUPPORT UZASSY_PY_SG1_16IN-01-225 SW 40055 SW-40055-D1G NA
670 2370-09A 2370-09A-SW-40072-1 SG1-16 GUIDE ON PIPE SHOE SG1-TYPE-3 GUIDE GAP=0mm D1G 16" Approved PRIMARY SUPPORT UZASSY_PY_SG1_16IN-01-223 SW 40072 SW-40072-D1G NA
Page 3 of 36
SL.NO. SPLIT WBS MODULE
NUMBER
#PIPE SUPPORTS::ItemNum#
#PIPE SUPPORTS::SplitWBS#
#PIPE SUPPORTS::ModuleNumber#
Page 4 of 36
PIPE CLASS PIPE MATERIAL MATERIAL ID IN SUPPORT TAG
A1C CARBON STEEL (4” & above) CS
A1C CS GALVANISED (1/2”-3”) CS
A1QN ALLOY 825 (UPTO 4") (SOUR SERVICE) AS
A1QN CS + CLAD (6" & ABOVE) (SOUR SERVICE) CS
A1X CU-NI ALLOY AS
A1S GRP CS
A11V GRP CS
A17AN CARBON STEEL (SOUR SERVICE) CS
A21V GRP (SOUR SERVICE) CS
A3GN DUPLEX STAINLESS STEEL (SOUR SERVICE) SS
A3P TITANIUM AS
A31V GRP CS
A51A CARBON STEEL CS
SS (UPTO -46 O C)
A51E STAINLESS STEEL
SL (BELOW -46 O C)
A57A CARBON STEEL CS
A59AN CARBON STEEL (SOUR SERVICE) CS
A58AN CARBON STEEL (SOUR SERVICE) CS
SS (UPTO -46 O C)
A60EN STAINLESS STEEL (SOUR SERVICE)
SL (BELOW -46 O C)
SS (UPTO -46 O C)
A61EN STAINLESS STEEL (SOUR SERVICE)
SL (BELOW -46 O C)
A71BN LOW TEMP. CARBON STEEL (SOUR SERVICE) LT