Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
MA-2014-4-001 Rev.1
A Leading Respiratory Care Company
MEKICS has always emphasized research and development as its top corporate priority.
The company approaches R&D through innovative, nimble and translational methodologies.
This three-fold dynamic allows MEKICS to continue its over-arching commitment to
enhancing quality of life. True to the company’s founding mission, MEKICS focuses its R&D
efforts on developing the kinds of products people need most. By developing therapies for
respiratory disorder, MEKICS has significantly advanced the science and understanding of
these prevalent disease processes. This rich body of knowledge and wealth of experience
positions MEKICS on the cutting edge for developing unique, innovative, finished products
and to partnering successfully with other developers.
All in One
Conventional to HFO.
Neonate to Adult.
HFT500
NIV
Patient
Ventilator
Monitor
MP1300
MV2000
“MEKICS Solutions”
SU:M2
MEKICS
Specification
Application
-High Flow Therapy Oxygen Blender + Pressure Limitation
-Nasal Continuous Oxygen Blended Flow
Benefit of DHFV(HFV+IMV)
2) Circuit Check : Breathing Circuit Check added in the turn on process of the system
4) Expiration Pressure Sensor disconnected and Proximal Pressure sensor disconnected detection
function added.
Safety is improved at expiration pressure port and/or proximal pressure sensor disconnection.
“Safety”
Note: New MV2000 volume support(VACV, VSIMV) is a very useful mode in patient who fail to
Ventilator have acute lung injury. If set up correctly the patient, even with a partial respiratory
drive, should incur minimal work in breathing.(Adequate Volume support).
Care must be taken that the patient does not hyperventilate and develop significant respiratory
alkalosis. Pneumatic Soft Ware Version 2.50
2) Improved P-V Tool : Bi-direction (Pressure and Volume Curve) measuring process.
2) After Expiration Flow Sensor cleaning or sterilization, The sensor should be dried well.
If the system has a calibration with the sensor which is not cleaned or dried well, it would make an
abnormal operation. Normally the system does not need the Inspiration-Expiration Calibration process
when is not there any mechanical sensor changing, Especially the Expiration Flow Sensor. When the
user executes an Inspiration-Expiration Calibration, should be checked a perfect condition of
the Expiration Flow sensor. Flow Zeroing calibration does not need to do very often, because the
system has a Flow Zeroing calibration automatically when the system has stopped and restart.
When the system has an Inspiration-Expiration Calibration after Flow Zeroing is not a right process.
*Local sourcing.
Item Description
Patient Circuit Reusable/ Disposable Patient Circuit
Humidifier Set Main body, Temp Sensor, Heater Wire
Proximal Sensor Adult, Neonate
Exp.
From Patient
Insp.
To Patient
Displaying Parameters
PRESSURE
Graph
FLOW
Graph
VOLUME
Graph
AC,LOCK
Setting Parameters(Volume,RR,TINSP,PSUPP,PEEP,O2 ) I:E RATIO
<Table1>
1. Display Various ventilator’s values monitoring
2. Display internal tube Resistance & Leakage
3. Etc.( Spontaneous breathing, lung compliance )
터
치
1. 5 kinds of Layouts
2. Changeable ‘Waveform’, ‘Loop’, ‘Trend’
3. Changeable “Trend Timing”
HIGH LIMIT
Setting Parameter
LOW LIMIT