Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Rev. H
Coriolis Mass Flowmeters
m100-XXXXX
m100
Coriolis Mass
Flowmeters
Flow rate 5.0 to 500 kg/min
(11 to 1100 lb/min) ISO 9001 Certified Manufacturing Facility
SPECIFICATIONS
DESCRIPTION
®
The m100 provides accurate, continuous, direct
measurement of mass, density, temperature and per-
cent solids over the flow range 5.0 to 500 kg/min (11 to
1100 lb/min).
DESIGN FEATURES
ACCURACY
Patented dual omega-shaped tubes provide outstanding
®
sensitivity to Coriolis forces. mass flow accuracy is
±0.10% and the mass flow rate repeatability is ±0.10%. • Direct mass, density and temperature
Its density accuracy is ±0.001 g/cc over its operating measurement
range.
• Weights & Measures approved for
LOW PRESSURE DROP AND 100:1 TURNDOWN custody transfer applications
®
The transducer is more sensitive to Coriolis forces
than conventional mass flowmeters, providing a greater • Patented omega-shaped flowtubes provide
mechanical gain. Fluid velocity requirements are unequaled sensitivity to Coriolis force
much lower to produce a given signal. This results in
a lower pressure drop and unequaled 100:1 turndown. • Wide 100:1 turndown
Therefore, accuracy never has to be compromised to • Lowest pressure drop
obtain an acceptable pressure drop.
• Smooth-bore, non-obtrusive flow path free
RELIABILITY from moving parts
The smooth-bore, non-obtrusive flow path is free from
moving parts, seals and bellows. The omega shapes
• 316L stainless steel
produce torsional loading instead of bending loading • 3A-Authorized version available
for improved reliability.
®
m100 Coriolis Mass Flowmeter
page 2
Meter:
Tube material 316L SST
Fluid:
Flow rate 5.0 to 500 kg/min (11 to 1100 lb/min)
Max. temperature 204°C (400°F)
Min. temperature -45°C (-50°F)
Max. operating pressure 83 bar (1200 psi); limited by flange rating
ASSOCIATED INSTRUMENT
Max. length of signal cable 300 m (1000 ft.) 8 core Belden 89892 shielded twisted pair
Electrical connections Screw terminal
Manufacturer Itron, Inc.
Meter model number M100 XXXXXX (refer to Ordering Information, page 3)
Instrument model number Refer to electronics Technical Specification Form
Datamate 2200: TS-612
NexGen SFT100: TS-620
NexGen SFT200: TS-621
1All calibration equipment traceable to N.I.S.T.
Itron, Inc. pursues a policy of continuous development and product improvement. The specifications in this document may therefore be changed without notice.
®
m100 Coriolis Mass Flowmeter
page 3
340 mm (13.39")
CONNECTION 316L SS
274 mm (10.8")
Wetted Parts
178 mm
(7.0")
1" 150#
688 (27.1)
ANSI RF
485 mm (19.09") 1" 300#
225 mm 706 (27.8)
(8.86")
ANSI RF
A
1" 600#
719 (28.31)
ANSI RF
1-1/2" 150#
696 (27.4)
ANSI RF
m100 3A-Authorized Transducer 1-1/2" 300#
714 (28.1)
225 mm ANSI RF
485 mm (19.09")
(8.86") 1-1/2" 600#
729 (28.69)
ANSI RF
178 mm
(7.0")
2" 150#
340 mm (13.39")
274 mm
704 (27.7)
(10.8")
ANSI RF
2" 300#
719 (28.3)
ANSI RF
2" 600#
738 (29.07)
536 mm (21.12") ANSI RF
DN25
Optional 2-1/2" x 1-1/2" Tri-Clamp® eccentric reducers are available. 689 (27.14)
PN40
WEIGHTS OF COMPONENTS DN50
689 (27.14)
Transducer: approx. 26.4 kg (58 lbs) PN40
Datamate 2200: approx. 5.2 kg (11.5 lbs)
NexGen SFT100:
Blind approx. 6.4 kg (14.1 lbs)
w/Display/keypad approx. 7.1 kg (15.6 lbs)
NexGen SFT200: approx. 1.8 kg (4 lbs)
U.S.A. / International:
1310 Emerald Road
Greenwood SC 29646-9558
U.S.A. Tel.: TOLL-FREE (800) 833-3357
(864) 223-1212
U.S.A. Fax: (864) 223-0341