Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
AOM 2200
Analog Output Module
Type: 810.001.420
General:
This module is an analog output module that contains 4 digital controlled floating output channels, each
output channel may either be used as a 0-10V voltage output or as a 0-20mA current output, available
in the connectors X1 and X2.
The Digital bus input is at the connector X9 and the extension connector to further modules is at the
connector X10.
At an Interface Module IFM 2200 a total of up to 8 modules of this family can be placed in any combina-
tion.
The physical layout is implemented in a module 125,4mm X 216mm and the module shall be mounted
on a DIN rail.
© SAM Electronics GmbH
2 Technical data
2.1 Electrical
Voltages/Currents:
0 to 10V
Signal Output 0 to 20 mA
Maximum load current
5mA
(Voltage Output)
Minimum load resistance
2kΩ
(Voltage Output)
Maximum load resistance
(Current Output) 600Ω
Power consumption:
5V 20 mA
24 V 175 mA
24 V SW 0 mA
Indicators:
5V Green LED
24 V Green LED
24 V SW Green LED
2.2 Mechanical
Connectors:
Interconnection cables:
Switches:
None
Dimensions:
Length 125,4 mm
Width 216 mm
Heigth Height above the DIN mounting rail: 60mm
Weight 380g
Other:
2.3 Environmental
3 Circuit Diagram