Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Model 4400
The 4400 Alarm Monitor provides a direct reading multi-
channel monitoring system
Features
6, 12 or 24 channel capacity
simple, quick configuration
simultaneous monitoring on all channels
wide range of inputs
relay and current outputs
RS232/RS485 serial communications
multi-drop capability
time and date stamped alarms
single channel integrity
back up supply card & transmitter power rail
Applications
• temperature measurement • compressor monitoring • turbine monitoring • process control
• vibration measurement • pressure measurement • pump monitoring
Inputs & Outputs
INPUTS – ANY COMBINATION ACCEPTED INTO THE UNIVERSAL CHANNEL CARD OUTPUTS
RTD Range T/C Range Input Range Monitor System integrity relay
314mm
Dimensional drawing A 15mm 237.5mm
ISSUE: 4400/MAR2001/UK
Specification
General: CSA listed: Class 2252 01
Accuracy: ±0.5ºC RTD LVD: EN61010-1
±1.0ºC Thermocouple EMC: Complies with the requirements:
±0.1% Span analogue EN 50081-1 Emissions
EN 50082-2 Immunity
Temperature (Operating) 0ºC to +50ºC
range: (Storage) -40ºC to +70ºC Weight: 6ch - 6.5kg nett, 10kg shipping
12ch - 9.0kg nett, 12kg shipping
Humidity: 0-95%RH in accordance with the 24ch - 15kg nett, 16kg shipping
requirements of IEC 68-2-3
Installation: Panel mounted
Vibration: Tested in accordance with IEC-2-6
Outputs:
Shock: Drop tested to IEC 68-2-31
H1 option: Two SPDT per channel (resistive loads
Delay time: Adjustable 0 to 60 seconds individually for only)
each set point
H2 option: Two SPDT per channel (resistive &
Dead-band: Adjustable 0 to 25% of span in 1% inductive loads)
increments for each set point
M1 option: DC analogue re-transmission output per
Response time: Less than 800 milliseconds with delay set channel
to zero
System: Local display
Alarm log: 256 alarm events and operator action LED for each channel
time-tagged and logged
Electrical:
Transmitter Up to 1 amp at 24Vdc available for P1 option: 18 - 36Vdc
power rail: powering transmitters P2 option: 90 - 260Vac 50/60Hz
P3 option: 110Vac 50/60Hz
Environmental: Complies with the requirements of EN61010-1 P4 option: 240Vac 50/60Hz
Ordering Information
Note:
Universal channel cards are required to operate each channel and must be ordered as a separate item from the unit.