Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
7 Phase 3
8 Rated frequency Hz 50
9 Type of cooling ONAN
10 Vector group Dyn11
11 Polarity N/A
12 Voltage tapping side Primary
Type of tap changer Off-load
Tappings range + / - 2 x 2.5 %
13 Class of insulation Class A
14 Type of oil Mineral oil
15 Material of winding (Primary / Secondary) Copper / Copper
16 Colour of tank RAL 7036
17 Altitude m Not exceeding 1000m above sea level
0
18 Ambient temperature C 40
19 Maximum temperature rise of top oil / winding K 60 / 65
20 No-load loss at rated voltage Tolerances
frequency and normal tap Watts ≤ 1,500 -
21 Load loss at rated current and normal tap (75 0C) Watts ≤ 14,750 -
22 Total loss at rated current and normal tap (75 0C) Watts ≤ 16,250 -
23 Impedance voltage at normal ratio (75 0C) % 5 +/-10 %
24 No-load current % 1.04 +30 %
25 Efficiencies at :
Full load unity power factor % 98.72
Full load 0.8 power factor % 98.40
1/2 load unity power factor % 99.18
1/2 load 0.8 power factor % 98.97
26 Regulation voltage at :
Unity power factor % 1.30
0.8 power factor % 3.91
27 Impulse withstand voltage of winding (Pri. / Sec.) kVp 125 / -
28 Power frequency voltage of winding (Pri. / Sec.) kV 50 / 3
29 Accessories list
Primary with Plug in bushing (24kV 250A) but without Elbow connector
Earth terminal
Lifting lug
Thermometer pocket
Marshalling box
30 Routine test
Each transformer shall pass our standard routine tests, and also pass the following tests in accordance
Leakage test.
31 Type test
The following type tests shall be in accordance with the relevant standards :
Temperature-rise test.
Type test will be carried out on one transformer of the same specification. The costs of all tests and
We confirm that our products manufactured in accordance with ISO9001 and ISO14001 standards.
All transformer specification from design and material selection for production shall be reviewed to
reduce for environmental impact and aim for environmentally friendly products.
Note : Mark to indicate the applicable information.