Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Release Notes
.
1
© 2017 Schneider Electric. All Rights Reserved
The information provided in this documentation contains general descriptions and/or technical
characteristics of the performance of the products contained herein. This documentation is not
intended as a substitute for and is not to be used for determining suitability or reliability of these
products for specific user applications. It is the duty of any such user or integrator to perform the
appropriate and complete risk analysis, evaluation and testing of the products with respect to the
relevant specific application or use thereof. Neither Schneider Electric nor any of its affiliates or
subsidiaries shall be responsible or liable for misuse of the information contained herein. If you
have any suggestions for improvements or amendments or have found errors in this publication,
please notify us.
You agree not to reproduce, other than for your own personal, noncommercial use, all or part of
this document on any medium whatsoever without permission of Schneider Electric, given in
writing. You also agree not to establish any hypertext links to this document or its content.
Schneider Electric does not grant any right or license for the personal and noncommercial use of
the document or its content, except for a non-exclusive license to consult it on an "as is" basis, at
your own risk. All other rights are reserved.
All pertinent state, regional, and local safety regulations must be observed when installing and using
this product. For reasons of safety and to help ensure compliance with documented system data,
only the manufacturer should perform repairs to components.
When devices are used for applications with technical safety requirements, the relevant instructions
must be followed.
Failure to use Schneider Electric software or approved software with our hardware products may
result in injury, harm, or improper operating results.
2
© 2017 Schneider Electric. All Rights Reserved
Table of contents
1. Product Overview ................................................................................................................................... 4
3
© 2017 Schneider Electric. All Rights Reserved
1. Product Overview
Current document describes the major improvements and firmware versions released for M241/M251
products.
2. Release History
The table below list all major releases for M241/M251 products.
4
© 2017 Schneider Electric. All Rights Reserved
3. Firmware evolution, v4.0.6.39
Version number: v4.0.6.39
Link: https://www.schneider-electric.com/en/download/document/M241_M251_Firmware_v4.0.6.39/
Restriction:
5
© 2017 Schneider Electric. All Rights Reserved
4. Legacy firmware evolution
4.1. Version V4.0.6.38
Link: https://www.schneider-electric.com/en/download/document/M241_M251_Firmware_v4.0.6.38/
Restriction:
FTP download is unsuccessful if the file size is greater FTP download is functioning as defined
than 256 kB
ERR LED Flashing – PLC does not boot Improved timing settings for DDR
6
© 2017 Schneider Electric. All Rights Reserved
4.2. Version V4.0.5.11
This firmware version is compatible with all M241 and M251 controllers. The mitigated anomalies are
listed in the table below.
Anomaly
Nodename lost
7
© 2017 Schneider Electric. All Rights Reserved
4.3. Version V4.0.4.14
New feature
Add EtherNet/IP Scanner on M251
This firmware version is compatible with all M241 and M251 controllers. The mitigated anomalies are
listed in the table below.
Anomaly
M251 goes into exception stop due to IOscanner
8
© 2017 Schneider Electric. All Rights Reserved
4.4. Version V4.0.3.20
This firmware version is compatible with all M241 and M251 controllers. The mitigated anomalies are
listed in the table below.
Anomaly
M251 goes into exception stop due to IOscanner
This firmware version is compatible with all M241 and M251 controllers. The mitigated anomalies are
listed in the table below.
Anomaly
After several downloads, values may be reset of the persistent variable in the %MW<1000 "retain
variables" range.
Under specific conditions, the M241 may lose the firmware after a power cycle
9
© 2017 Schneider Electric. All Rights Reserved
4.6. Version V4.0.2.46
This firmware version is compatible with all M241 and M251 controllers. The mitigated anomalies are
listed in the table below.
Anomaly
In DHCP mode the @ IP is inversed
This firmware version is compatible with all M241 and M251 controllers. The mitigated anomalies are
listed in the table below.
Anomaly
IO bus Expander (Reference TM3XTRA)
10
© 2017 Schneider Electric. All Rights Reserved