Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
8 dB V23809-C8-C11
Multimode 1300 nm LED ATM 155/194 MBd Transceiver
●
.024 ±.004
∅0.1 M
●
11x 2x
●
(0.3 ±0.02) ∅.004 M
●
(14 –0.05) (2.8 max)
.012 ±.001
●
Z .055 ±.002 .110 max 8x 2.54=20.32
●
9x
8x .100=.800
●
●
∅0.3 M A
●
1 2 3 4 5 6 7 8 9
●
∅.012 M A
●
(25.25 ±0.05) Rx
●
SC 12.7
●
Tx .075 ±.004
.100 .800
●
●
FEATURES APPLICATIONS
• Fully compliant with all major standards • ATM switches/bridges/
• Compact integrated transceiver unit with duplex SC routers
receptacle • High speed computer links
• Single power supply with 3.0 V to 5.5 V range • Local area networks
• Extremely low power consumption < 0.7 W at 3.3 V • High definition digital
• Excellent EMI performance television
• PECL 100K compatible differential inputs and outputs • Switching systems
• System optimized for 62.5/50 µm graded index fiber
• Industry standard multisource footprint
Maximum Ratings (Absolute maximum stress)
• Very low profile for high slot density
• Wave solderable and washable with process plug Exceeding any one of these values may destroy the device imme-
• Test board available diately. However, the electro-optical characteristics described in the
following tables are only valid for use under the recommended op-
• UL-94 V-0 certified
erating conditions.
• ESD Class 2 per MIL-STD 883 Method 3015
Package Power Dissipation (PD)
• Compliant with FCC (Class B) and EN 55022
5 V ........................................................................................1 W
• For distances of up to 2 km 3.3 V ..................................................................................0.7 W
Supply Voltage (VCC–VEE) ............................................. –0.5 to 7 V
Data Input Levels (VIN) PECL....................................... VEE–VCC V
Differential Data Input Voltage...................................................3 V
Operating Case Temperature.......................................... 0 to 85°C
Storage Ambient temperature ................................. –40°C to 85°C
Soldering Conditions Temp/Time
(Tsold) MIL-STD 883C, Method 2003 ....................... 270/10°C/s.
ESD Resistance (all pins to VEE, Human Body) ................... 1.5 kV
9–28
DESCRIPTION Recommended Operating Conditions
This data sheet describes the Siemens ATM Trans- Parameter Sym. Min. Typ. Max. Units
ceiver, which belongs to the Siemens Multistandard Ambient Temperature TC 0 70 °C
Transceiver Family. It is fully compliant with the pro-
posed Asynchronous Transfer Mode ATM OC-3 pro- Power Supply Voltage VCC–VEE 3 5.5 V
posed standard. Supply Current 3.3 V ICC 190 mA
ATM is being developed because of the need for mul-
Supply Current 5 V(1) 210
timedia applications, including real-time transmission.
The data rate is scalable and the ATM protocol is the Transmitter
basis of the broadband public networks being stan-
dardized in the International Telegraph and Telephone Data Input High Voltage VIH–VCC –1165 –880 mV
Consultative Committee (CCITT). ATM can also be Data Input Low Voltage VIL–VCC –1810 –1475
used in local private applications.
Threshold Voltage Vbb–VCC –1420 –1240
The Siemens low cost ATM transceiver is a single unit
comprised of a transmitter, a receiver and an SC Input Data Rise/Fall, 20–80% t ,t 0.4 1.3 ns
R F
receptacle. This frees the customer from many align- Data High Time(2) ton 1000
ment and PC board layout concerns. The modules are
designed for low cost applications. Receiver
The inputs/outputs are PECL compatible and the unit Output Current lo 25 mA
operates from 3.0 V to 5.5 V power supply. As an
Input duty Cycle Distortion tDCD 1.0 ns
option, the data output stages can be switched to
static levels during absence of light, as indicated by Input Data Dependent Jitter tDDj
the Signal Detect function. It can be directly inter-
Input Random Jitter tRj 0.76
faced with available chipsets.
The excellent performance of the Siemens Multistan- Input Center Wavelength lC 1260 1380 nm
dard Transceiver Family is the result of long term Electrical Output Load(3) RL 50 Ω
experience. The reliability of our modules is proven by
high volume production. Notes:
1. For Vcc-Vee (min., max.) 50% duty cycle. The supply current (Icc2 + Icc3)
does not include the load drive current (Icc1). Add max. 45 mA for the three
outputs. Load is 50 Ω into VCC –2V
2. To maintain good LED reliability, the device should not be held in the ON-state
for more than the specified time. Normal operation should be done with 50%
duty cycle
3. To achieve proper PECL output levels the 50 Ω termination should be done to
VCC –V. For correct termination see the application note.
Figure 1. Schematic
VCC–TX VCC–RX
C1/3=4700 nF (optional)
VCC–RX
C2/4=4700 nF VCC
9 1
L1/2=15000 nH L1
(L2 is optional) GND GND VCC
82R
82R
82R
82R
R1 R3 R5 R7
C1 C2
RD
TXD RDN GND GND
VCC–TX
TXDN SD
VCC-TX L2
130R
200R
130R
130R
130R
R2 R4 R9 R8
R in Ohm 5V 4V 3.3 V VCC-RX C3 C4
R6
R1/3 82 100 127 Transceiver
GNDGND GND GNDGND GND GND
R2/4 130 100 83
R5/7 82 100 127
R6/8 130 100 83
R9=200 Ohm
The power supply filtering is required for good EMI perfor- A GND plane under the module is recommended for good EMI
mance. Use short tracks from the inductor L1/L2 to the module and sensitivity performance.
VCC-RX/VCC-TX.