Dependably on the job.
Completely out of sight.
Sensor EspioTM is the only fall sensing alarm system
designed to install underneath pool coping where
it is out of sight and out of the way. Not only does
this preserve poolside appearance, but it allows
installation on pools with automatic pool covers.
• Perhaps most important for you to know is that
Sensor EspioTM is based on technology proven in more
than 300,000 pools worldwide. Aquasensor technology
is clearly the global standard.This is a product you can trust.
• Aquasensor smart technology quickly senses pool fall
by people that are 18 pounds or heavier to meet
ASTM F2208-02. A powerful poolside alarm (100 db)
and wireless remote alarm (85db) are both activated
within seconds when fall is detected. Sensor EspioTM
is effective in pools as large as 20' x 50'.
• While Sensor EspioTM dependably senses fall, it is not
falsely triggered by other routine water disturbances.
Exclusive detection technology knows the difference
between body fall and wind, rain, and water disturbances
created by pool equipment.The result is a minimum
of false alarms.
• Sensor EspioTM comes with a convenient wireless,
handheld remote on/off control. For safety sake, it is
designed with a limited range of 10' to require pool
inspection be fore disarming.This is a critical design
feature for maximum safety.
fall sensing pool alarm
• For pool owner convenience, the wireless indoor
alarm has an extensive 100' range.
• For convenience and safety, Sensor EspioTM
automatically rearms itself a few minutes after
swimmers leave the pool.
• Installation is simple and fast on new or existing
pools. All hardware and simple instructions are
provided, including required batteries.
• As another indicator of Sensor EspioTM quality and The poolside immersion detector/alarm unit is the only
reliability, it is backed by a 2-year limited warranty. system that can be installed under pool coping where it
is out of sight and out of the way.
As you can see, Sensor EspioTM anticipates and
meets all the challenges for a pool alarm that’s
effective, dependable, simple to install and operate,
and yet invisible on the job.As you take steps to
The handheld remote on/off control
prevent the heartbreak of pool-related accidents,
allows you to arm and disarm the
rely on Sensor EspioTM as your proven and positive system with the push of a button
line of defense. when you are within 10' of the
The wireless remote offers an poolside alarm after inspecting
extensive 100' range for added the pool.
mobility.
SPECIAL NOTE : Exclusive Aquasensor Technology minimizes false alarms. Upon installation and
initial start-up of Sensor EspioTM, all pool operating systems should be operating (filter pump, waterfall,
fountain, cleaner, etc.). Sensor EspioTM self-calibrates to its environment during the first 10 minutes
of operation so it "knows" not to activate its alarm as the result of these normal water disturbances.
fall sensing pool alarm fall sensing pool alarm

A Breakthrough in Detection,
Dependability and Discretion

SUMMARY OF KEY FEATURES

• Exclusive Aquasensor Technology • Compatible with auto pool covers

• ASTM F2208-02 Certified • Poolside unit totally waterproof
• Exclusive under-coping installation • All installation hardware included
• Strong poolside alarm- 100 db • Alarm Failure signals
• Strong indoor wireless remote alarm (85db) • Low battery light
with 100' range • Batteries included (4 "D")
• On/off remote control with 10' range-requires • Chemical and UV-resistant materials of construction
pool inspection before disarming • Two-year limited warranty
• Effective in pools up to 20' x 50' (1,000sft) • UL listed
• Automatic rearming after bathing • NSF certified
• Poolside unit dimensions: 10.5" x 8" x 2.2"

For more information contact:

MG International - ZI Athélia II
220, impasse du Serpolet
13600 La Ciotat - France
expor t@aquasensor.com
www.aquasensor.com

A Breakthrough in Detection, Dependability and Discretion