Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Edition 02/04
Configuration
Important Notice
This manual is copyrighted. All rights reserved. It is not allowed to reproduce, to micro-copy, to
photocopy in some other way, to record or to incorporate with electronic systems, to duplicate or
distribute this manual in any manner before previous written agreement of the author.
No guarantee for the completeness or correctness of the contents of this manual is taken.
Products’ and company’s name used in this manual are copyrighted labels. All rights reserved by
owner of this label. The use of copyrighted labels without explicit permission of the respective owner
of labels is forbidden.
eMail rohrpostsyteme@swisslog.com
Date of issue: 20.10.04 / Edition 02/04 Page 2 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
Directory
IMPORTANT NOTICE 2
DIRECTORY 3
1 CONFIGURATION 8
1.1 TITLEBAR 9
1.2 MENU BAR 9
1.2.1 EXIT CONFIGURATION. 9
1.2.2 EXPERT MODE 9
1.2.3 CONFIGURATION TO UTF 10
1.2.4 SHOW TOOL TIPS. 10
1.2.5 PICTURES FOR TRANSPO.NET-MONITOR 10
1.2.6 INFO 10
1.3 TREE VIEW 11
2 MENU VIEW 12
2.1 TOOLBARS 12
2.2 INPUT FIELD 12
2.3 OUTPUT WINDOW 13
3 MENU “SYSTEM“ 13
4 MENU “DEVICE“ 17
5 MENU “RUNTIMES“ 18
Date of issue: 20.10.04 / Edition 02/04 Page 3 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
6 MENU “DISPLAY OPTIONS“ 19
9 MENU “SETTINGS“ 22
13 MENU “ADDRESSES“ 27
14 MENU “FREERUN“ 28
16 MENU “TRANSFER“ 30
17 MENU “TRANSPORTER“ 31
18 MENU “CARRIER“ 32
25 MENU “2.BLOWER“ 39
26 MENU “FRESHAIR“ 40
30 MENU “OPTIONS“ 45
31 MENU “TIMETABLE“ 46
32 MENU “PROGRAMS“ 47
Date of issue: 20.10.04 / Edition 02/04 Page 7 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
1 Configuration
The structure of a pneumatic tube system can be entered in the database with the “Configuration”
program. On the left-hand side of the screen, you can see the program in a tree-view. It is divided into
several menus. The following pages will describe how to get on with the program.
Date of issue: 20.10.04 / Edition 02/04 Page 8 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
1.1 Titlebar
• The button “Maximize“ serves to maximize the window to full screen. The resolution of the
program is set on 1024 x 768 px for the best presentation.
In this menu, you can make many settings and hold the information you need.
In the activated expert mode, the buttons of the mouse have the following new functions in the over-
view field:
• Button on the left (double click): selected data will be deleted. Same function as “Delete”.
• Button on the right (normal mode): add a new device. Same function as “New“.
• Button on the right (add mode): save the input. Same function as “Save”.
Date of issue: 20.10.04 / Edition 02/04 Page 9 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
1.2.6 Info
Under “Info“, the version number of the program, as well as the Dongle-ID and its properties are
displayed.
Date of issue: 20.10.04 / Edition 02/04 Page 10 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
Date of issue: 20.10.04 / Edition 02/04 Page 11 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
2 Menu view
2.1 Toolbars
UTF save: Click to save the configuration to UTF. Choose folder and name.
Runtime dialog: This button is automatically activated, so that the runtime window
appears when two devices are connected together. Give in the new
time, which can be taken over as a standard time value.
Date of issue: 20.10.04 / Edition 02/04 Page 12 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
2.3 Output window
Each data is displayed in the output window. With the left button of your mouse, you can navigate
between the different data.
3 Menu “System“
You can attribute the name of the system, of the customer and of the distributor / dealer.
Date of issue: 20.10.04 / Edition 02/04 Page 13 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
• System: Enter the name or designation of the system, which appears by next start
in the title bar of the Transpo.neT program.
• Customer: Enter the name of the customer. This information does not appear
somewhere else.
• Dealer: Enter the name of a contact person or a phone number to be found rapidly.
This information does not appear somewhere else.
Select the language of the “Configuration“ program. English and German are at your disposal.
Select the language of the “T-Control“ program. Six different languages are at your disposal. Restart
“T-Control“ after change of the language.
Date of issue: 20.10.04 / Edition 02/04 Page 14 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
3.6 Info data
• Creation date: it is attributed by the 1st start of the “Configuration“ program with a new
database. This date cannot be changed and it shows the creation date
of a databank.
• Modification date: it shows the date and time of the last modification.
• Initsystem: if the control box is not selected, the database must still be registered.
Click on “Initsystem“ to start the program “Service card“ for registration.
Have your chip card or distributor-dongle ready for registration.
There is the possibility to remind the customer of maintenance. Click in dialog box “Start maintenance
due” and enter date and number of carrier (in carrier counter). The first value which will be reached,
will initiate the maintenance display. This display appears to the customer as follows:
• In case of a failure, the title bars of the programs change their colours into blue & yellow or red
& yellow.
• “Maintenance due“ appears on the display of the devices. Press E-button to delete the
message, which will pop up by the next start of T-control.
Date of issue: 20.10.04 / Edition 02/04 Page 15 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
3.8 Send ID / Carrier counter
The Send ID and the carrier counter can be set to zero with the “Reset“ button. Restart T-Control after
you reset them.
3.9 Logdata
There are two possibilities to delete the logdata: you can either delete all the logdata or enter a date,
before which every logdata will be deleted.
Date of issue: 20.10.04 / Edition 02/04 Page 16 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
4 Menu “Device“
In the output window, every data are listed. You can navigate between them with the left-button of
your mouse.
Date of issue: 20.10.04 / Edition 02/04 Page 17 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
5 Menu “Runtimes“
In the output window, every data are listed. You can navigate between them with the left-button of
your mouse.
Date of issue: 20.10.04 / Edition 02/04 Page 18 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
In the output window, every data are listed. You can navigate between them with the left-button of
your mouse. To reset the display option back to standard, click on the right button of the mouse. A
menu button pops up.
Date of issue: 20.10.04 / Edition 02/04 Page 19 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
In the output window, every data are listed. You can navigate between them with the left-button of
your mouse. To reset all speed dial keys, click on the right button of the mouse. A menu button pops
up.
Date of issue: 20.10.04 / Edition 02/04 Page 20 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
In the output window, every data are listed. You can navigate between them with the left-button of
your mouse. To delete all automatic targets and modes, click on the right button of the mouse. A
menu button pops up.
Date of issue: 20.10.04 / Edition 02/04 Page 21 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
9 Menu “Settings“
Date of issue: 20.10.04 / Edition 02/04 Page 22 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
9.3 Data sets
The setting of the options will be made via check-boxes. Through simple clicks the options will be
activated or deactivated. Additionally the time can be setted manually for time-dependent options. For
every device several options can be safed at the same time. The setting should be done separately
for every device. The selected unit is shown in the top-left hand corner of the register.
In the output window, every data are listed. You can navigate between them with the left-button of
your mouse. To delete all device options, click on the right button of the mouse. A menu button pops
up.
Date of issue: 20.10.04 / Edition 02/04 Page 23 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
In the output window, every data are listed. You can navigate between them with the left-button of
your mouse. Click on the right button of your mouse to call a menu to delete the group-nr. or to
change group-name or to delete group-name.
.
Date of issue: 20.10.04 / Edition 02/04 Page 24 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
In the output window, every data are listed. You can navigate between them with the left-button of
your mouse.
Date of issue: 20.10.04 / Edition 02/04 Page 25 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
In the output window, only the devices of type diverter are listed. The selected device is displayed on
the left side of the input field.
In the output window, every data are listed. You can navigate between them with the left-button of
your mouse.
Date of issue: 20.10.04 / Edition 02/04 Page 26 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
13 Menu “Addresses“
Special functions: if a new configuration has been created, but no address were entered, click on
“Create address“ in the input field, in order to attribute automatically an address to every station.
In the output window, every data are listed. You can navigate between them with the left-button of
your mouse.
Date of issue: 20.10.04 / Edition 02/04 Page 27 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
14 Menu “Freerun“
Click “New“ to enter a device for a line freerun, then you can select in the combo-box of the input field
the needed action.
In the output window, every data are listed. You can navigate between them with the left-button of
your mouse.
Date of issue: 20.10.04 / Edition 02/04 Page 28 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
In the output window, every data are listed. You can navigate between them with the left button of the
mouse. To delete a freerun, click with the right button of your mouse in the output window and click on
“Stop Freerun“.
Date of issue: 20.10.04 / Edition 02/04 Page 29 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
16 Menu “Transfer“
In the output window, every data are listed. You can navigate between them with the left button of the
mouse.
Date of issue: 20.10.04 / Edition 02/04 Page 30 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
17 Menu “Transporter“
In the output window, every data are listed. You can navigate between them with the left button of the
mouse.
Date of issue: 20.10.04 / Edition 02/04 Page 31 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
18 Menu “Carrier“
In the output window, every data are listed. You can navigate between them with the left button of the
mouse.
Date of issue: 20.10.04 / Edition 02/04 Page 32 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
In the output window, every data are listed. You can navigate between them with the left button of the
mouse.
Date of issue: 20.10.04 / Edition 02/04 Page 33 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
In the output window, every data are listed. You can navigate between them with the left button of the
mouse.
Date of issue: 20.10.04 / Edition 02/04 Page 34 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
In the output window, every data are listed. You can navigate between them with the left button of the
mouse.
Date of issue: 20.10.04 / Edition 02/04 Page 35 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
In the output window, every data are listed. You can navigate between them with the left button of the
mouse.
Date of issue: 20.10.04 / Edition 02/04 Page 36 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
In the output window, every data are listed. You can navigate between them with the left button of the
mouse.
Date of issue: 20.10.04 / Edition 02/04 Page 37 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
In the output window, every data are listed. You can navigate between them with the left button of the
mouse.
Date of issue: 20.10.04 / Edition 02/04 Page 38 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
25 Menu “2.Blower“
In the output window, every data are listed. You can navigate between them with the left button of the
mouse.
Date of issue: 20.10.04 / Edition 02/04 Page 39 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
26 Menu “Freshair“
In the output window, every data are listed. You can navigate between them with the left button of the
mouse.
Date of issue: 20.10.04 / Edition 02/04 Page 40 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
In the output window, every data are listed. You can navigate between them with the left button of the
mouse.
To delete a blower delay, click with the right button of your mouse in the output window and click on
“Delete Blower Delay”
Date of issue: 20.10.04 / Edition 02/04 Page 41 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
In the output window, every data are listed. You can navigate between them with the left button of the
mouse.
Date of issue: 20.10.04 / Edition 02/04 Page 42 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
The representation of the devices begins with the air-switch from the left to the right.
To connect devices, click on a device with the right button and then click with the left button of your
mouse to select the corresponding connection and then select the other device as well as its
corresponding connection.
Run-time dialog
The run-time dialog is used to give the run-time between 2 devices. It is always on, so that it appears
every time you make a connection. The new value can also be taken over as standard value.
Date of issue: 20.10.04 / Edition 02/04 Page 43 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
To delete a connection, click with the right button of your mouse on the corresponding device and with
the left button of your mouse on the connection. In this menu, you can also delete selected device
completely.
Date of issue: 20.10.04 / Edition 02/04 Page 44 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
30 Menu “Options“
In the output window, every data are listed. You can navigate between them with the left button of the
mouse.
Date of issue: 20.10.04 / Edition 02/04 Page 45 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
31 Menu “Timetable“
In the output window, every data are listed. You can navigate between them with the left button of the
mouse.
Date of issue: 20.10.04 / Edition 02/04 Page 46 of 47 2004 © Swisslog Rohrpostsysteme GmbH
Configuration
32 Menu “Programs“
With the button „Initsystem“, the database is registered on your distributor-ID. You also have the
possibility to stop a 30-day clearance.
Date of issue: 20.10.04 / Edition 02/04 Page 47 of 47 2004 © Swisslog Rohrpostsysteme GmbH