Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
FRP Panel Tank
FRP Cylinder Tank
FRP Sand Filter
FRP Carbon Filter
FRP Manganese Filter
g
FRP Water Softener
STP Biotechnology
System
RECKATFIBER by PT. Reckat Composites
is the preferred solution for industrial FRP Products
PT. RECKAT COMPOSITES DELMIMA
was established and incorporated with the intention of providing
high quality Fiberglass Reinforced Plastic (FRP), Carbon Steel and
Composites products.
We are committed to using only high quality raw materials from
well‐known brands to assure our product quality
RECKATFIBER
PT. RECKAT COMPOSITES DELMIMA
Our products are designed and fabricated in accordance with industry standards providing the end user
with dependable quality solutions, and the right material of choice for a variety of applications.
The international standards are the benchmark for fabrication of our FRP products, including:
STANDARD SPECIFICATION
ASME RTP‐1 Reinforced Thermo‐set Plastic Corrosion Resistant Equipment
Specification for Design and Construction of Vessels and Tanks
BS 4994 :1987 in Reinforced Plastics
AWWA M45 Fiberglass Pipe Design
Standard Specification for Contact‐Molded "Fiberglass" (Glass‐
ASTM D6041 Fiber‐Reinforced Thermosetting Resin) Corrosion Resistant Pipe
and Fittings
Standard Specification for Filament‐Wound Glass‐Fiber‐
ASTM D3299 Reinforced Thermo‐set Resin Corrosion‐Resistant Tanks
Standard Specification for Contact‐Molded Glass‐Fiber‐
ASTM D4097 Reinforced Thermo‐set Resin Corrosion‐Resistant Tanks
The chemical resistant level of the FRP products are
determined by the selection of Resin Grade as follows :
Municipal Waste
Residential Waste
Industrial Waste
Office Building
Hotel & Apartment
Mall & Shopping Center
Hospital & School
A blend of Nature
And Technology
Jl. Raya Ciangsana No. 78, Gunung Putri, Bogor
Tlp : 021‐8241 1971 • Fax : 021‐8243 5209
Email : marketing@reckat.com
RECKATFIBER
Website : www.reckat.com PT. RECKAT COMPOSITES DELMIMA
INFLUENT Separation Equalization Anaerobic
• BOD 300 ppm • FRP Screen • Pump • Honeycomb
• COD 200 ppm
• SS 100 ppm
Blower Submersible Pump Diffuser Bioball Control Panel
*) This drawing is indicative only
and may vary / differ from actual product
No Description No Description
1 Handrail (Optional) 12 FRP Shell Panels
2 Air Vent, FRP or PVC 13 0.5x1m FRP Shell (If any)
3 Kick Plate (Optional) 14 Pole Stiffener Pipe, Galv.
4 /
FRP Roof / Cover Panels 15 Fastener,, Galv. / SUS304
/
5 Fastener, Galv. / SUS304 16 FRP Separator Panels
6 Nozzles, FRP or PVC 17 Corner Support Steel
7 Mechanical Hole 18 Steel Base, Paint / HDG
8 Roof Support, PVC Pipe 19 External Ladder, Steel Pipe
9 Internal Ladder, PVC Pipe 20 Fastener, Galv. / SUS304
10 Outlet Nozzle 21 Supports (Optional)
11 Side Manhole (Optional) 22 Rubber Seal / Gasket
Jl. Raya Ciangsana No. 78, Gunung Putri, Bogor
Tlp : 021‐8241 1971 • Fax : 021‐8243 5209
Email : marketing@reckat.com
RECKATFIBER
PT. RECKAT COMPOSITES DELMIMA
Website : www.reckat.com
FRP Panel Tanks can be installed at ground level, on top of or inside buildings, or on steel towers. Typical
applications include municipalities, industrial users, agriculture, aquaculture, reservoirs, hotels, hospitals,
offices, private homes and other building complexes, as well as high volume long‐term storage where
regular piped supplies may not be available.
Roof Panel
Roof Panel Shell Panel
Shell Panel Bottom Panel
Bottom Panel FRP Fittings
FRP Fittings
TANK HEIGHT
PART NAME
1 m 2 m 3 m 4 m 5 m
Bottom Thickness 6 mm 7 mm 8 mm 9 mm 12 mm
Shell‐1 Thickness 5 mm 6 mm 7 mm 8 mm 10 mm
Shell‐2 Thickness ‐ 5 mm 6 mm 7 mm 8 mm
Shell‐3 Thickness ‐ ‐ 5 mm 6 mm 7 mm
Shell‐4 Thickness ‐ ‐ ‐ 5 mm 6 mm
Shell‐5 Thickness ‐ ‐ ‐ ‐ 5 mm
R f Thi k
Roof Thickness 4
4 mm 4
4 mm 4
4 mm 4
4 mm 4
4 mm
Steel Base UNP. 100x50 UNP. 120x55 UNP. 150x75 UNP. 200x80
Connection Plate N/A 200xT.5 mm 200xT.6 mm 200xT.8 mm 200xT.8 mm
Pole Stiffener N/A Galv. / SUS 304 Pipe Ø.1¼” Pipe Ø.1½”
Bolt+Nut+Washer Galv. / SUS304 M.10 x 40 Galv. / SUS304 M.10 x 50
Gasket Rubber 5 mm Thickness
Ladder Internal PVC Pipe Ø.1¼” and External Steel Pipe Ø.1”
Jl. Raya Ciangsana No. 78, Gunung Putri, Bogor
Tlp : 021‐8241 1971 • Fax : 021‐8243 5209
Email : marketing@reckat.com
RECKATFIBER
PT. RECKAT COMPOSITES DELMIMA
Website : www.reckat.com
Reckat FRP Pressure Tank is manufactured by computerized filament winding fiberglass with high strength
resin that provides the following advantages :
Completely rust and corrosion resistance
Easy transportation and installation
High strength and light weight
Wide rangeg of applications,
pp , for residential,, commercial and industrial water treatment
Smooth surface appearance
Low installation and maintenance cost
Jl. Raya Ciangsana No. 78, Gunung Putri, Bogor
Tlp : 021‐8241 1971 • Fax : 021‐8243 5209
Email : marketing@reckat.com
RECKATFIBER
PT. RECKAT COMPOSITES DELMIMA
Website : www.reckat.com
Reckat FRP Pressure Tanks range is from 8”x44” up to 63”x86” with flow capacity from 0,5 m3/hour (8 lpm)
up to 45 m3/hour (750 lpm). The maximum operating pressure of the tank is 7 Bar (100 Psi).
1. Manual Backwash : Using 5 manual valves or
manual multiport valve for backwash and
manual multiport valve for backwash and
rinse operation
2. Automatic backwash : Using 5 actuator
valves or automatic control valves for
backwash and rinse operation
Volume
V l Capacity
C it I l t
Inlet
Model Base Dia. Height Material Opening
(Liter) (m3/h) Outlet
SCF 0844 T2,5" 200 1120 31,7 0.5 ‐ 0.75 FRP 2‐1/2" 3/4"
SCF 0948 T2,5" 230 1220 45,6 0.75 ‐ 1.0 FRP 2‐1/2" 3/4"
SCF 1054 T2,5" 250 1370 60,5 1.0 ‐ 1.25 FRP 2‐1/2" 3/4"
SCF 1252 T2,5" 300 1320 84,0 1.4 ‐ 1.8 FRP 2‐1/2" 1"
SCF 1354 T2,5" 330 1370 105,5 1.4 ‐ 1.8 FRP 2‐1/2" 1"
SCF 1465
SCF 1465 T2,5"
T2,5 350 1650 142,9 1.9 ‐ 2.4
1.9 FRP 2‐1/2"
2 1/2 1"
1
SCF 1665 T2,5" 410 1650 196,1 2.5 ‐ 3.1 FRP 2‐1/2" 1"
SCF 1665 T4" 410 1650 196,1 2.5 ‐ 4.0 FRP 2‐1/2" 2"
SCF 1865 T4" 450 1650 236,2 3.2 ‐ 4.0 FRP 4" 2"
SCF 2162 T4"B4" 530 1570 311,7 4.0 ‐ 5.0 FRP 4" 2"
SCF 2472 T4"B4" 610 1830 481,3 5.8 ‐ 7.6 FRP 4" 2"
SCF 3072 T4"B4" 760 1830 747,2 10 ‐ 12 FRP 4" 2"
SCF 3672 T4"B4" 910 1830 1071,2 13 ‐ 17 FRP 4" 2"
SCF 4272
SCF 4272 T4"B4" 1060 1830 1453 4
1453,4 18 22
18 ‐ FRP 4" 2"
SCF 4872 T6"B6" 1220 1830 1925,3 22 ‐ 30 FRP 6" 2 1/2"
SCF 6386 T6"B6" 1600 2180 3944,8 36 ‐ 45 FRP 6" 3"
Jl. Raya Ciangsana No. 78, Gunung Putri, Bogor
Tlp : 021‐8241 1971 • Fax : 021‐8243 5209
Email : marketing@reckat.com
RECKATFIBER
PT. RECKAT COMPOSITES DELMIMA
Website : www.reckat.com
RECKAT Composites offers a wide range of solutions for storing fluids or solids. These solutions are made
out of full FRP (Fiberglass) or dual laminate materials. The choice of material makes storage tanks of RECKAT
Composites easy to install in different environments. From experience we know that every application has
its own specific requirements. RECKAT Composites storage solutions include detail engineering,
manufacturing, transportation and installation of all components.
Jl. Raya Ciangsana No. 78, Gunung Putri, Bogor
Tlp : 021‐8241 1971 • Fax : 021‐8243 5209
Email : marketing@reckat.com
RECKATFIBER
PT. RECKAT COMPOSITES DELMIMA
Website : www.reckat.com
Reckat Composites has developed tank lining systems suitable for most containment applications, these
include chemical tank liners, acid dip tank liners, fuel tank liners, hot water tank liners and many more.
The lining of concrete and metal tanks has proven to be an efficient and cost effective alternative to a new
replacement.
APPLICATIONS : OPTIONAL FEATURES :
Fibreglass liner for acid tanks
Fibreglass liner for acid tanks Smooth easy to clean surface
Smooth easy to clean surface
Fibreglass liner for hot and cold Available in most colors
potable water tanks U/V protected
Fuel and oil tanks Minimal down time
Re‐lining of concrete tanks Bondable to most surfaces
Technical Specifications
Lining applications Steel Concrete FRP
Surface preparations Sand Blasting Grinding Grinding
Reinforcement Fibreglass, E‐Glass, C‐Glass
Isopthalic for salty water and moderate acid
Bisphenolic for strong acid (normal temp.)
Resin grade
Vinylester for strong acid and heat
Epoxy for strong acid, alkali, fire retardant
Lamination sequence :
Thickness 2 mm Primer + 2xm300 + Veil + Top Coat
Thickness 2,5 mm Primer + 3xm300 + Veil + Top Coat
Thickness 3 mm
Thickness 3 mm Primer + 4xm300 + Veil + Top Coat
Primer + 4xm300 + Veil + Top Coat
Thickness 4 mm Primer + M450 + 4xm300 + Veil + Top Coat
Thickness 5 mm Primer + 2xM450 + 4xm300 + Veil + Top Coat
Color Natural / most color available
Methods Hand Lay Up / Spray Up
Inspection & Test Visual, Pinhole test, Acetone test, Hardness
Reckat Composites is equipped to manufacture fiberglass components in production runs or 1‐off's. Our products are
built to strict quality standards. Because of its corrosion resistance and versatility, fiberglass is a popular material choice
for containers and covers.
We can build FRP produtcs from custom‐made moulds that involve complex curves and have tight tolerances.
With our Auto cad design software and our well‐equipped wood working/mould building departments we are capable of
taking on even the most ambitious manufacturing projects.
Jl. Raya Bantar Gebang – Setu KM.10, Bekasi
Tlp : 021‐8241 1971 • Fax : 021‐8243 5209
Email : marketing.reckat@gmail.com
RECKATFIBER
PT. RECKAT COMPOSITES DELMIMA
Website : www.reckatcomposites.com
A P P L I C A T I O N S
Power Plant High Rise Building Food Industries
OFFICE :
Vila Nusa Indah‐3 Blok KD.5/2,
/ , Bojong Kulur
j g
Gunung Putri, Bogor, Jawa Barat , 16969
Phone : 021‐8241 1971 • Fax : 021‐8243 5209
WORKSHOP :
JL. Raya Ciangsana No. 78, Ciangsana
Gunung Putri, Bogor , Jawa Barat , 16968
Gunung Putri, Bogor , Jawa Barat , 16968
Website : www.reckat.com
E‐mail : marketing@reckat.com