Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
htm
Topología de laboratorio
Procedimientos de laboratorio
Tarea 1: Instalar Cisco Unified RTMT
Disposi vo Habla a
https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm 1/18
28/12/2019 https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm
administración Ci5co123!
2. Desde su escritorio asignado, inicie Internet Explorer. Navegue a la Consola de Cisco Unified CM en
h ps://10.1.1.100/ccmadmin (o use el acceso directo en la barra de Favoritos) e inicie sesión con el
nombre de usuario admin y la contraseña Ci5co123. .
4. This is the page where Cisco RTMT may be installed. On your desktops, RTMT is already installed.
Close your browser.
5. Launch Cisco Unified RTMT from your desktop. A shortcut was automa cally created during the
installa on.
8. Enter username admin with password Ci5co123! in the authen ca on required window and click OK.
Click Accept if you get an Add Cer ficate no fica on.
https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm 2/18
28/12/2019 https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm
Note: You may see warnings about Node is unreachable: 10.1.1.101. This is normal for our lab. The
HQ-Subscriber is not used in CICD and is currently shut down.
10. Click CPU and Memory and wait approximately 30 seconds. Now view the graph and tabular metrics
for current CPU and memory u liza on.
https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm 3/18
28/12/2019 https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm
11. Click Disk Usage and note the disk output a er 30 seconds.
https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm 4/18
28/12/2019 https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm
12. Select Performance under the Performance Sec on and expand 10.1.1.100.
https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm 5/18
28/12/2019 https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm
14. Double click BuildDeviceCount and view the output in the right pane. This is one example of how you
can get detailed sta s cs for a par cular counter.
https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm 6/18
28/12/2019 https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm
17. Right click the Perfmon Counters tab and choose New Category.
18. In the Input window, enter Network as the name and check the Present Data in Table View box and
click OK.
19. In the Counters column, expand Network Interface, select Rx Errors and drag over to the new
Network tab.
https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm 7/18
28/12/2019 https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm
https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm 8/18
28/12/2019 https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm
22. Repeat the previous steps except this me add Tx Errors. The right window should look like this when
you get done.
23. The above steps walk you through how to create a custom tab in RTMT when you need to monitor
specific counters.
24. Now navigate to System > Tools > Alert > Config Email Server.
https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm 9/18
28/12/2019 https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm
Port: 25
26. To set an alert configura on, navigate to System > Tools > Alert > Alert Central.
https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm 10/18
28/12/2019 https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm
https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm 11/18
28/12/2019 https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm
29. In the Alert Proper es: Threshold & Dura on, set the processor load to 95% and click Next.
30. Leave the Frequency & Schedule proper es at the default and click Next.
https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm 12/18
28/12/2019 https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm
32. In the Alert Ac on window, click Add and enter a name of Admin.
33. Click Add to the right of the Recipients: sec on and enter admin@globalknowledge.com.
https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm 13/18
28/12/2019 https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm
https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm 14/18
28/12/2019 https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm
In this task, you will monitor Cisco Unity Connec on voice mail ports.
37. Reopen RTMT, but this me, enter the address of Cisco Unity Connec on 10.1.1.102 and click OK.
39. In the Authen ca on window, enter username admin and password Ci5co123! and click Ok.
https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm 15/18
28/12/2019 https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm
43. Set the Polling Rate to 1 sec and click Start Polling.
https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm 16/18
28/12/2019 https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm
45. Return to the desktop and maximize your CIPC phone if minimized. Posi on the CIPC so you can s ll
see the RTMT output.
https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm 17/18
28/12/2019 https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm
48. Unless you are done with labs for the day, leave the Citrix client up. Otherwise, follow the proper
disconnect steps provided in Lab 1.
Lab Complete
https://www.remotelabs.com/ldhtm/Gb/cisco/1724/1724_L23.htm 18/18